Satellite M35X-S109: Home Toshiba screen comes after 13mins

Similar Questions

• Satellite M35x-s109 - screen is black, the fan works momentarily then nothing

  I have a Satellite M35x-s109 (4 years and more under warranty). I went to turn on the laptop after being in hibernation for a few hours.

  The fan kicks on momentarily - then stopped working. The screen displays a picture very very low sign windows on the screen but nothing else. I can not even a cursor appears. It is powered as indicated by the Green led on the front of the laptop. The battery is fully charged. I tried to connect with the power adapter as well. I tried to connect an external monitor to the laptop.

  The only image that appears is the Windows form indicating which loads. Then after a few seconds of loading, the image on the external monitor is empty and the monitor goes into sleep mode. The laptop is turned off automatically or custom fade at all and the only way for me to turn it off is to take out the battery.

  Any ideas what's wrong with the laptop? Thanks in advance.

  It's very strange question. try to remove the battery, leave cell phone 20 minutes without any food and try to start with power current only. Try it without, and later with the external monitor.

  When the external monitor goes into standby mode, try to use the FN + F5 key combination to see if you get the image on the external screen again.
  Play a little with it. If nothing is done it may be something serious with the screen and I'm afraid that you need professional help.

• Satellite U400-22n and Win7 - screen freezes after 5 min

  Hi, this is my first post

  I ve bought a new U400 with preinstalled Vista last week. 2 days ago I ve upgraded to windows 7 32 bit professional when I looked at install windows prompted me that it requires a full install, so I did install a normal full, windows 7 installed normally.

  Now my screen freezes after 5 min and windows go black s and restarts after 3-5 min, I ve downloaded all the drivers from the Toshiba site I ve used the auto detect and installed the drivers one by one and tested if restarting stop s, I reinstalled windows now 4 - 5 times returned my copy to the store and got a new copy of windows DVD , it s the same.

  A Please someone any advice for me. Like the store I ve this perch will not upgrade to windows 7 for me.

  Hi mate

  The U400-22n seems to belong to the series of PSU44E.
  There is a special BIOS for Win 7 32 bit 4.80 - WIN32.

  Please update it all first!

  In addition, the unit supports the Chipset Mobile Intel GL40 Express and graphics card.
  The latest graphics card driver can be downloaded from the Intel page

  To do this and test it

• Satellite L500-1XD - why my screen flashes after fashion watches?

  Hello

  After the start from standby mode, the screen is fine for 3 or 4 minutes, and then I notice a fast blink. This becomes worse and worse until I got then to restart the laptop, or put into hibernation and power up again. I tried to gently move the screen to see if the connection is loose, but the screen just keeps blinking like before. The flashing is random, it's like watching the CPU flash light but its my going fullscreen. It seems to happen after the mode 'sleep', it happens every time, but I would say more than 50 percent.

  This happened to someone else? I wonder what I should do next, or the contact person. I've only had the laptop in July!

  Thank you very much in advance for any advice you can offer.
  Anna

  Hello Anna

  Have you noticed this behavior from the first day?
  You know, sometimes some Microsoft updates can have a negative influence on the standard functions. For a few months, I noticed a strange situation on my laptop satellite. After sleep, I get a stupid error and mouse is dead. I don't have it in the past.

  What you can try is to install the new OS by using the HDD recovery procedure and to test the feature with the factory settings. I am sure that with its own OS preinstalled, everything will be OK. If the problem persists perhaps you should contact the closest service Toshiba.

• Driver IRQL screen comes after getting the computer error

  I have a HP pavilion with a model number of the p7-1423w bought last November 2012. When I'm on the computer and/or internet I get a blue screen saying: driver IRQL_not_less_or_equal (NETIO. (SYS) and then my computer restarts. I checked online everywhere for a fix and do not understand what it takes to cause the explanations are long and hard for a computer novice to do. I don't know what's this problem and hope that its not dangerous. Can you help me solve this problem?

  JoanieL,

  Turn off the computer.
  That you put it on press the F10 key. This will load the BIOS setup utility.
  Press F9 to load the default values.
  Press F10 to save and exit.

  When the computer starts up, check if everything is working.

  Go to Device Manager and uninstall the driver network card wireless.

  Restart the computer.

  This will uninstall and reinstall the driver for the wireless.

  How long have you had this problem?

  I would like to know how everything goes.

• Satellite Pro A300-28V - black screen boot failure

  My three days old Satellite Pro A300 began yesterday to hang at startup in Vista. I rebooted twice with good result, but now I see only the home Toshiba screen, then it goes black with a cursor top left. I won't answer on /F12/ F8 F2 or the recovery of the DVD. Indicator LED disc is black, fan-only sound. I have connected not no matter what external monitor ever on this one.

  At the moment so it's Sunday I chose the battery and will try again in an hour or two, otherwise I contact seller tomorrow. Any ideas what's happening? BIOS crash, hard drive (after three days)?
  / disappointed

  Hello

  Does this mean that you can t access the BIOS too?

  If it s, then it seems to be a hardware problem. Therefore, the service provider authorized in your country. They can help you to repair the laptop.

• Satellite Pro L300 - cursor black screen flashing

  Hi all

  I have a Toshiba laptop Satellite Pro L300 Vista.

  The customer earned him in because when it starts it goes to home Toshiba screen then goes to a black screen with cursor flashing at the top left. I connected external monitor with the same result. Swapped RAM as well.

  Have run Memtest (spent), Seagate HDD long test (past), Ultimate boot CD and Winternals without success.
  * F8 does not work * and no more than the resumption of the plant.

  Can enter the BIOS F2 and F12 no problems and the HARD drive is listed.

  I reinstalled Vista on CD and on reboot it goes back to blinking cursor. I tried booting from the Vista CD repair and system restore. FixBoot commands and FixMbr prompt as well as with the same result.
  I feel that it may be a corrupt CMOS sensor? It's like the OS installs correctly, but the computer loses his memory on reboot where the operating system?

  Is the battery CMOS easily accessible and removable on this model?

  Has anyone experienced these symptoms? Is - fixable at lower cost?

  Hello

  If you have clients, I guess you're a technician and hope you have a few pieces of equipment in your store.
  Have you tried to set the BIOS to default settings and check again?
  If possible try to exchange the HARD drive and test the functionality again.
  You can use laptop with Linux live CD (HARD drive not required)?

  To be honest that I think n problem t is ORGANIC and, in my opinion, the exchange of the CMOS battery is not necessary.

  Please test it with the new HARD drive and post comments.

• Satellite A200 - after Toshiba screen black screen

  Hey, I recently had a problem with my Toshiba laptop where, after the screen shows "Toshiba leading innovation", my laptop screen becomes black.
  I have manged to find the problem is one of my hard drives, and I am asuming this is drive C as the laptop does not start. If anyone has any information on what can be wrong, ways to fix it and the possible costs in setting priority, can you help me please?

  also... What are the chance I'll lose my files ect. off the drive?

  Thank you

  Hello

  As far as I know, second HARD drive has nothing to do with the boot and he's here for the backup data.
  You can remove it, but also be able to boot OS if everything is OK.

  Can you please set BIOS to default settings and use F8 at startup?
  You can enter advanced startup options?

• Satellite M40 - 129 stops starting after the Toshiba screen

  Hello
  My M40 continues sometimes to start after the Toshiba screen. He stops and all I see is the blinking cursor. No Error Message or something else and normal boot from the HARD drive. Boot from CD (for example. Œuvres of Knoppix). This problem sometimes occurs and traceable for me isn´t.

  Best regards
  Spoony

  Hey Spoony

  Unfortunately on this path, it is not easy to say why this is happening. Each user has a specific configuration OS and we don t know how your operating system is configured.

  You can boot OS in safe mode? If Yes check what the problem may be a little. If there is anything you can do I recommend you save all your data and preinstall unit using rescue media. If you do this I recommend also to create two partitions.

  Don t compare WXP and Linux startup procedure. As you know that Knoppix using just the RAM and no HARD drive for the race.

• Satellite M35X-S149: no boot, cs blue light and the fan comes but nothing else.

  I have a * TOSHIBA SATELLITE M35X-S149 * that does not start.
  The blue power light and fan comes on +(fan ran for 5 seconds and stop) +, nothing else.

  Yes, the RAM modules must be verified.
  I remember that one of my friends had a very similar question.
  The power led was ONE and after pressing the power button, the cooling modules was audible for several seconds. But the phone didn t initialize and nothing was visible on the screen.

  Finally, we found that one of the RAM modules was dead
  After the replacement, that everything worked perfectly!

• Satellite L450D - 13 X - blue screen after BIOS update

  I have the blue screen after BIOS update. Satellite L450D - 13 X worked ok before that ideas?

  Is there contact information for Support TOSHIBA?

  Hey,.

  > Is there any TOSHIBA support contact information?
  No, becaue, must contact an authorized service provider. Guys can help on any hardware and software problems and can also order spare parts from Toshiba.

  Here is a list of aspic, where you can look closer:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT

  Good luck! :)
  ?

• Satellite A210 - turs screen off after the Windows startup screen

  When I start my windows there is the splash screen. After that, my screen goes off and cannot log on to windows.
  Satellite A210
  ATI Mobility Radeon HD2600

  Where can I get some old drivers for the ATI Mobility Radeon HD2600, that I can install without starting windows?

  > Where can I get some old drivers for the ATI Mobility Radeon HD2600, I can install without starting windows?

  Please don t get me wrong, but I think you're on the wrong track.
  (Graphics card, LAN, etc.) device drivers must be installed in the currently running system (i.e: Windows OS, etc.)

  I m sure; pilot isn t the problem if nothing is visible on the screen.

  First of all, I would recommend you to connect the laptop to an external monitor/screen just to see if something would be visible on the screen 2.

  But just a question: have you tried to start Notepad using a boot disk (windows installation disc, the disc recovery Toshiba or similar?).
  Maybe the Windows system is confusing upward and therefore, you are not able to start the system? In my opinion, you should test this option.

• Satellite M35x-s111: do I need to drive to have any screen

  Do I need to have a hard drive in my Toshiba Satellite m35x-s111 to haver any screen? Without a hard drive in my computer it does not show any screen, but it turns on and plays normal under the screen.

  Also, there is no display on an external monitor.

  I m a bit confused and I don't really understand your question.
  How do you start Notepad and see something without the HARD drive and a good OS installed?

  You have the HARD drive! Without the HARD drive, you will get an error message!

• Satellite A210 - 19(d) - Toshiba Disc Creator does not work after last update SP2

  Satellite A210 - 19(d), HomePremium Vista 32.
  Toshiba Disc Creator does not work after update to sp2. Error code is 32007C-26-00000001.

  He needs to click ok up to 17 times to eliminate the error window, but it is more.

  Everything was OK before sp2.

  Please take a look in this thread:
  https://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=60687

  It user pdun459 had the same error using the Toshiba Disc Creator and could solve this uninstall and installation of this new

• Need drivers of Windows XP Home for Satellite M35X-S163

  I need Satellite M35X-S163 drivers for Windows XP Professional

  I can't find in the website

  Thank you

  Hello

  I checked the support Toshiba U.S. under http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp page and it is listed for your model of laptop. Visit this page and download all the drivers you need.

  Good luck!