CPU at 100% working

Similar Questions

• Portege R100 - CPU usage 100%

  Hello!

  Everyone knows about this problem?
  My Portege R100 after installing the new copy of Windows XP and directly after the installation of the display driver, Trident (reboot) bizarre behavior.

  Welcome screen goes white on the lower part (when the first yellow line is). Then I have some software problems.

  When to start records search engine, when I update the list of wireless networks and I explore the files by clicking on 'My computer', (this does not happen when I right click on START and 'Explore') displays CPU usage 100% and everything is so slow that I can barely move a cursor.

  Everything goes back to normal once I closed above applications.
  I can install all drivers and all right, but after Trident display it is bad.

  This is the driver I use since I bought the laptop, I do not know that is fine.
  I installed it several times before and I have a few copies of it, which I've already tried so it must be good.

  The cross thing only my mind is a hardware failure.
  Someone of you knows than before?

  Thank you...

  It has nothing to do with your computer - this is the trident driver problem - there is a work - around
  Try changing your display configuration-

  (1) right click on your mouse to the desktop to bring up the display property, and then click Advanced - here, you will see a tab say somethng like 'graphic acceleration.
  (2) reduce the rate of acceleration - move the tab to the left - make sure it is not full
  (3) this trident driver can cause the BONE to redraw the screen whenever you move your mouse with some applications

  If my post is not detail for you
  Try google with the keyword "how to turn off the graphics acceleration in windows xp" - you will get some good instructions

  That will solve your problem!

  Good luck and enjoy your nice laptop!

  Arthur

• Windows 7 Laptop CPU at 100%

  Hello

  Laptop Windows 7 turns to the CPU at 100%.  Reinstalled Windows 7 - same problem.  Remove it the battery, power on, replace the battery - unless there are problems.  Given the multitude of bugs online - still the same problem. Please notify.

  Thank you

  Joe

  Is not a difference. Two of them work.

• Use Windows 7 CPU to 100% only when it is plugged

  I post this topic only because my problem is quiet unusual. I found hundreds of topics related to 100% CPU usage in Windows 7, but none of them was related to this over-consumption of the processor during the charging of the battery. There is also a situation that 100% of CPU usage occurs while working on the battery, but my case is completely the opposite.

  Windows 7 x 64 prof. system goes to 100% CPU use occasionally and it becomes impossible to work. then all of a sudden, the problem goes away and everything works right. After a few days of work without problem the problem returns and so on. I did the fresh install several times and the problem appeared immediately after the installation of the system every time. Finally, I discovered, that it lasts only when the charger is plugged in when you are working on the battery, everything works correctly. pluggng immediately after the CPU reaches 100% usage and so on.

  laptop HP Compaq 6710 b, Windows 7 x 64-teacher system.

  Help!

  Hello once again, Andre. Thank you for helping me. I tried to find such a framework (high precision event Timer) in my BIOS, but I did not: it seems to be fixed on my laptop. However, I found it in my Windows Device Manager and I have disabled HPET here, but it did not help in any case - there is no change in the use of the CPU (always 100%).

  BUT - I found an effective solution on my own! The thing was very simple - it was the fault of my power cord to the AC adapter / CC. I tried my colleague adapter and CPU usage dropped sharply to 5-10% on idle. Then I plugged my power adapter - use has exploded to 100%, and again, I used my colleague adapter - use declined.

  THE REASON FOR THE HIGH IN MY CASE CPU USAGE WAS DEFECTIVE AC ADAPTER

  It was a big surprise for me, because the problem occurred only from time to time. Apart from this, the laptop work properly. I tried hundreds of things, including the reinstallation of the system 3 times, change a hard drive (which seemed to make some strange sounds), my memory test, install the latest drivers from HP, change settings loading, etc. Only after buying a new battery (the old one was not operation at all) I noticed that the problem goes away after unplugging the AC adapter.

  I lost a lot of time trying to solve this problem and it was very frustrating, I also found that a lot of people have similar problems, so if you, dear reader, have 100% CPU use problem, unplugg your power adapter first know, that it's abandoned.

• After awhile java.exe is the CPU at 100%

  Hello!

  I have a problem with the java.exe in the environment in which I work. In the environment, I have a physical server: Sun Fire X 4100 Server with 2 processors and 16 GB of RAM for control of virtualization. On the system, this is the Microsoft Windows Server 2008 R2 Datacenter and vCenter 5.5.

  For the most part, we are 5 guys in the team who use the vSphere Web GUI. We are connecting to the server using RDP and after some time, we can not connect because the CPU is at 100%. It takes 20-30 minutes to be able to connect. And then 5-10 minutes to be able to click on something. For example, to kill the java.exe file keeps the CPU at 100%. This isn't a good idea because afterwords the Web GUI does not work so we need to restart the server.

  Anyone of you have any idea why this is happening?

  Bogdan

  Sorry! I can't see the part about it being the physical server... which version of VC is this?

  A few resources that might help:

  VMware KB: VMware vCenter Server resource use is 100% and no longer

  http://Brian-Kayser.blogspot.in/2013/04/VMware-VirtualCenter-Server-high-memory.html

  Concerning

  Girish

• Matched XW8400 CPU... .only a CPU slot 1 work

  I have Inhereted a XW8400 with only works on 1 2 matched Intel quad core Cpu. I have exchanged around the matched CPU and both work well, but only in slot 1. The information system gives me only 1 CPU to 4 cores and 4 logic.

  I have inspected the slot 2 with a microscope and found that no pins are damaged, broken or out of place. I'm removing the CPU in a good sense.

  It has been suggested that I update my Bios and found a level of 2.3xxx on the HP site and downloaded, however, when you try to load it in F10 during boot to start what he reads in the column flashrom two andUSB Optics (which I tried) shows a red window saying "file is not present missing or corrupted. " I checked and found that it is NOT corrupt and most certainly there IS on both disks and USB flash memory.

  My motherboard is at fault? because everything else works very well with win 7 pro 64 bit and 16 GB of ram ECE in the correct locations.

  The questions I have are:-

  (A) it is the motherboard 1) have I missed some sort of activation process? (2) how do I test if it is the motherboard?

  Can (B) Pourquoi I not take my flashrom as indicated in the above path?

  What I am doing wrong? and how do I check and or a solution?

  any suggestions welcome, I know it's probably an old machine now, but he has left life plaenty and works great (if a little slow by the standards of today ' hui).

  Thank you very much in advance for any response.

  Kind regards

  Damianscorpio

  Be able to run in what concerns only a processor... it may be a motherboard problem because you have proven that the two processors are the same and work in the upper part when taken there by themselves.  You will have to just live with a Quad Core...

  Regarding the question of the USB... the USB key must be formatted cost with fat32, it must have only the single .bin file on it and nothing else, and we must put it in my computer when it stops completely.  Then, boot in the BIOS and use the option here in the first tab updated the BIOS to go into the BIOS.

  The bin file is 7D5_0238.bin, and it's the only thing you want to see on this USB key.  I'll try to tie it, but it cannot be allowed.

  Nope... not allowed.  I'll try to zip and tie it...

  Yep... that worked.  Just unzip that put on your USB key and try with that.

  If this does not work then just run the HP SoftPaq for this update BIOS of Windows 7... just the fire and it should automatically launch a page that allows you to run the BIOS flashing directly from in W7.  This page will not be talking about Windows 7, that does not matter.  You may need to respond in W7, the program installed correctly.

  EDIT: in general, it is best to get something as important as this .bin file directly from the source, the HP SoftPaq.  How to do this has been posted here several times... it is in the BACK folder after you run the SoftPaq, which is SP51225.exe for the last (and probably last) xw8400 BIOS updater.  It will be at the root of drive C, inside the SWSetup folder.

• Sampling runs CPU at 100%

  I use a NI 4472 DSA and have a minor problem when executing the example the spectrum analyzer code. Pegs the CPU to 100% when I taste > 25 k. y at - it a known solution for this problem?

  Hi talltubatom,

  The behavior you're seeing is the nature of the DAQmx driver. Ce KB explains this behavior for 7.4 of DAQmx and superior.  If you are looking to reduce the use of CPU, you can use the mode 'waiting', otherwise, if you use 'return', you will still see high CPU usage, but if you need other programs to run, they will see the necessary CPU.  Let me know if you have any other questions on this, have a great day!

• Read the CPU hits 100% in the FIFO usage

  I have a PC in real-time with a card of RIO 7833R. I write the values that I read a microphone in a FIFO at a sampling rate of 4 kHz.The length of the FIFO is 2048. The PC in real-time, when I call 'FIFO read' function to read say 400 data samples, the use of CPU time real PC hits 100%. Why is it so? The function 'Read FIFO' is placed inside a while loop.

  Thank you

  Prashant

  Hi Prashant,

  Reading the FIFO is a method of querying, so if the number of elements specified to read are not available when the method is called, it queries the FPGA until they are.  This causes the CPU to 100% usage. You can find more information on this subject and a way around this here.

• Windows XP I often setup.exe keeping the CPU at 100% for at least a few minutes.

  Running Windows XP, I often setup.exe keeping the CPU at 100% for at least a few minutes... this process can be completed or ignored?

  "Setup.exe" is a generic term used by many applications.  The short answer is 'yes', it's OK to complete the process, but you really need to know what it is and why it continues to run.

  You probably need to download, install, update and run these free malware scanner (not at the same time):
  MalwareBytes AntiMalware
  SUPERAntiSpyware

  If that is not fix things, and assuming that this process begins when you start the computer, download, install, and run Autoruns.  When Autoruns has finished scanning, click the 'Connection' tab and look for the line that contains "setup.exe".  You can just uncheck the box on the left, or remove the item, which will prevent the routine of starting when Windows starts.

  Preferably, however, you should look at the path containing setup.exe where you should be able to deduce what application is trying to set itself up.  You can then take the appropriate measures, which may be simply delete the folder that contains the file.  Note that if you delete the file, you must ALSO remove the line in Autoruns, otherwise you will get a "file not found" error every time Windows starts.

• My computer redirects me to random pages and turn my CPU at 100%... I think that his "ping.exe".can someone help?

  Original title: ping.exe

  I have something on my computer that redirects me to random pages and runs my CPU at 100%... I think that his "ping.exe".can someone help?

  MalwareBytes's AntiMalware - no AntiVirus. ;-)

  Probably your best bet - flatten (wipe) the system and start from scratch.  You will need your most recent backup (your stuff, like your documents, photos, music, video, spreadsheets, databases, presentations, bookmarks/Internet favorites, e-mail contacts, serial number, proof of purchase/receipts, that may have been scanned in, etc. and so on...) and a good list of installed software and hardware specifications (I suggest Belarc Advisor running on the current system and print the results if possible) then you can get the drivers before or after installation.

  Of course, you will also need your multimedia installation product key/serial numbers and that go hand in hand.  In Windows XP - there is no way for me to know (without telling you) what level your installation CD is... so you will need to install the SP2 and SP3 after installing the operating system.  I would leave it disconnected from the Internet (physically) until it is at least SP3 and you have confirmed its firewall is enabled and, if possible, you have installed an antivirus application.

  For you, I suggest the eSet 32 antivirus (not more) - which costs ~ $60 every two years for private users.  Add to that the MalwareBytes full package which costs, if I remember, ~ $25 for life.

  Then, once the system * is * connected to the Internet (physically) - get hardware drivers installed for everything and the rest 100 + installed post-SP3 updates.  Then you can worry about all your other programs and restore your files LAST.

• "Task manager" and Norton AV cpu use 100% constantly, always etc.

  I'm looking at my roommate pc and same problem. under Win XP, SP3.  To run any program takes about 5 full minutes.  CPU use 100% in Norton Anti Virus (NAV) or the Task Manager.  For now I'm just using taskmanger to see the %.  The only way to get to 0-2% is to restart in safe mode.  Go to start/run and msconfig, checked the only button "Load System Services", is went to 'Services' tab, hid Microsoft services and disabled all services, and then restart.  The 100% cpu is always attached to 100%, but the pc certainly significantly faster programs. (almost normal)  Does anyone know how to fix this?  I ran a full NAV of the system scan and a spybot search and destroy scan which finds that some cookies.  Any help would be greatly appreciated.

  Dear Palcouk, I found the problem.

  For someone who has either taskmanager/Norton AV and it shows cpu 100% stable, but when your pc is restarted in safe mode (press F8 repeatedly after reboot), it seems to fall to 0-2%.  Download and run Process Explorer. Once executed with your cpu showing 100%, look under the CPU column.  Regardless of the program see you running the stronger use of the processor is the problem.  You can check this out, as I did by right clicking and "kill process".  Then check your CPU usage again.  Must be 0-2%, which is normal if you are running many programs.  In my case of roommate when I flew over the mouse program svhost using a 99% cpu, it has demonstrated a program that comes from a HP servoce.  It turns out that she has recently reinstalled the drivers of hp printer and somehow it corrupted his PC.  The fix was to reinstall the HP software on write corruption because we were able to uninstall all HP software.  She told me that she was trying to 'fix' the software earlier, but it's probably where corruption has come.  Problem solved.

  Thank you

  screamn7

• Hello, I bought a new CPU and need to transfer my student CS6 Design and Web Premium. The reason for the news of the UC, it's that my old CPU no longer works so I can not turn off. Any suggestions?

  Hello, I bought a new CPU and need to transfer my student CS6 Design and Web Premium. The reason for the news of the UC, it's that my old CPU no longer works so I can not turn off. Any suggestions?

  Hi titi % 20wright,.

  Please use the link below to Download Adobe Creative Suite 6 applications

  Since you get two activation with a license, once installed you must activate the product using the same serial number. See, https://helpx.adobe.com/x-productkb/global/find-your-serial-number.html

  Let us know if that helps.

• High CPU use 100%

  Hello

  High CPU usage 100% on 32-bit windows 2003 std

  This a virtual machine after 2 processors and 4 GB of ram.

  Please suggest how to solve

  Hello

  It always depended on your edition of Windows:

  Operating system	Number of processors	Physical RAM
  Microsoft Windows Server 2003, Standard Edition	4	4 gigabytes (GB)
  Microsoft Windows Server 2003, Standard x 64 Edition	4	32 GB
  Microsoft Windows Server 2003, Enterprise Edition	8	64 GB
  Microsoft Windows Server 2003, Enterprise Edition x 64	8	1 terabyte
  Microsoft Windows Server 2003, Datacenter Edition	32	64 GB
  Microsoft Windows Server 2003, Datacenter x 64 edition	64	1 terabyte

• CPU at 100% game dosen't work

  It IS PAST MY COMPUTER IS FINE THEN DRANK WOOOSSH 100% AND THEN MY FAV GAME STOPS WORKING AND WINDOWS AND BOOM DEAD I RESTART AND STILL W0OOOOOOSH 100% please help cause I love this computer. Here are my computer details:

  Windows 7 Pro x 64 bit

  Pentium Dual-Core CPU E5300 @ 2.60 GHz GHz 2.59

  4.00 GB of RAM (usable 3.19)

  64-bit operating system

  Help, please

  There may be some malicious programs on your computer. Try to search for malware and see if it works. There are a bunch of malware detection programs in the net, like Malwarebytes.

• Satellite A100-784 (PSAANE) - CPU is 100% most of the time

  Hello

  I have this Toshiba Satellite A100-784 and it has Vista Home Basic as the operating system. The CPU is at 100% most of the time, and I don't know what to do more (I've eliminated all unnecessary programs that might have a background process). Sill, form 100% of the CPU, the core load takes 40 to 60% most of the time.
  I thought to install XP to make it work, but after reading the forum is not that simple, due to the fact that the HARD drive can be SATA.

  Can you help me with this situation? I can hardly work on this laptop and I think to change the brand if I don't find a solution to this, even Toshiba is my favorite.
  Thanks for your time answering this problem.

  Kind regards!

  All you have done is just, but you must understand that no one knows here Setup OS and what you've done in the past.
  If you are not satisfied with the way in which your laptop is now running the best thing you can do is to back up all your important data and install Vista using delivered Toshiba Recovery CD/DVDs.

  After doing this you will own preinstalled OS and everything should be OK again.