High CPU use 100%

Similar Questions

• "Task manager" and Norton AV cpu use 100% constantly, always etc.

  I'm looking at my roommate pc and same problem. under Win XP, SP3.  To run any program takes about 5 full minutes.  CPU use 100% in Norton Anti Virus (NAV) or the Task Manager.  For now I'm just using taskmanger to see the %.  The only way to get to 0-2% is to restart in safe mode.  Go to start/run and msconfig, checked the only button "Load System Services", is went to 'Services' tab, hid Microsoft services and disabled all services, and then restart.  The 100% cpu is always attached to 100%, but the pc certainly significantly faster programs. (almost normal)  Does anyone know how to fix this?  I ran a full NAV of the system scan and a spybot search and destroy scan which finds that some cookies.  Any help would be greatly appreciated.

  Dear Palcouk, I found the problem.

  For someone who has either taskmanager/Norton AV and it shows cpu 100% stable, but when your pc is restarted in safe mode (press F8 repeatedly after reboot), it seems to fall to 0-2%.  Download and run Process Explorer. Once executed with your cpu showing 100%, look under the CPU column.  Regardless of the program see you running the stronger use of the processor is the problem.  You can check this out, as I did by right clicking and "kill process".  Then check your CPU usage again.  Must be 0-2%, which is normal if you are running many programs.  In my case of roommate when I flew over the mouse program svhost using a 99% cpu, it has demonstrated a program that comes from a HP servoce.  It turns out that she has recently reinstalled the drivers of hp printer and somehow it corrupted his PC.  The fix was to reinstall the HP software on write corruption because we were able to uninstall all HP software.  She told me that she was trying to 'fix' the software earlier, but it's probably where corruption has come.  Problem solved.

  Thank you

  screamn7

• Windows Explorer high cpu use jn 9

  Computer freezes & I have to restart my computer

  Hello

  (1) do you have made no changes before this problem?
  (2) you receive an error message then the closure of the computer?
   
  Follow the steps from the links below and check if it helps.
   
  Method 1: You can check if the Windows Task Manager also shows high CPU usage. To do this, follow the steps mentioned in the link.
  See details about your computer's performance using Task Manager
  http://Windows.Microsoft.com/en-us/Windows-Vista/see-details-about-your-computers-performance-using-Task-Manager

   

  Method 2: Follow the instructions in Internet Explorer 9 from the link below and check if it makes a difference.
  Use the software instead of rendering GPU rendering
  http://support.Microsoft.com/kb/2398082

   
  Method 3: Run the FIXIT from the link below, and if that helps.
  Solve Internet Explorer add-on problems when IE hangs or freezes
  http://support.Microsoft.com/mats/ie_freezes_or_crashes/en-us
   
  Hope this information helps.
   
   

• Norton is the internet Explorer display high cpu use

  Norton 360 is showing a high utilization of the processor with internet explore.  What does that mean?  How to fix (if necessary)?

  You must request the help of Norton Support.

  You could start here: http://community.norton.com/t5/Norton-360/Constant-High-CPU-usage/td-p/473508

  If you are unhappy with your subscription or Norton 360 are subject to deadline you could follow the advice of Tommy Stanley and try another program BC

  http://www.AV-Comparatives.org/

  http://www.dslreports.com/Forum/r25776413-2011-anti-virus-poll

  Kind regards...

• Mozzilla not respounding high cpu use plugin - container.exe computer is totally locked

  I start up firefox, and go new. Sometimes it allows me to watch for a while. without warning mozilla not respounding computer is completely locked. I try to stop the program (mozilla) sometimes it allows me, and other times it takes several tries to stop. Mozilla said plugin - container.exe CPU high usage. Happened several times in recent weeks. I updated several times without success.

  Like most of the commonly used web plugin, Flash is the most likely the cause. I don't know why the problems increased with Flash with the combination of Firefox 41 and 19 Flash. I think that people who work.

  For now, I suggest the following to minimize potential problems with Flash in your troubleshooting:

  (1) to avoid unnecessary pain on the sites where the Flash is not really essential, try to set the Flash on Click-to-Play (Ask 'activation'). This will delay the Flash start on a page, until you approve.

  To set 'Ask to activate', open the page modules using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Search 'Shockwave Flash' and always change 'enable' to 'ask to activate '.

  With this setting, when you visit a site that wants to use the Flash, you should see a notification icon in the address bar and usually (but not always) one of the following values: a link in a gray rectangle dark in the page or an information bar sliding between the toolbar and in the page area.

  The plugin notification in the address bar icon usually resembles a little Lego block, dark gray. (If it is red, Flash must update.)

  The delay in the activation of Flash can help distinguish between the problems caused on the initial page load, put in folds and script activation vs Flash/loading bar.

  If you see a good reason to use Flash, and the site looks trustworthy, you can go ahead and click on the notification icon in the address bar to allow Flash. You can trust the site for the time being or permanently.

  But some pages use Flash only for tracking or play ads, so if you do not see an immediate need for Flash, feel free to ignore the notification! He will just stand here in case you want to use it later.

  (2) consider rolling back at the end of the extended support of Flash 18. We make the security updates, which you can find if you scroll down half way down this page: https://www.adobe.com/products/flashplayer/distribution3.html - it's for plugin-based browsers, MSI or EXE format should work.

  Most likely, you need to remove Flash 19 before this installer works. This article has a link to the uninstaller program: https://helpx.adobe.com/flash-player/.../uninstall-flash-player-windows.html.

• High CPU use/Slow Performance after you install the updates of Windows

  I run Vista Business 32-bit.

  After you install many Windows updates in the last few days, I've known very slow performance after the system worked for a while. Resource monitor shows 70-100% CPU usage, even when you run all the apps (that I know of). This makes everyhting grind to a halt, same trip that the mouse jerky movements. I ran several complete system with McAfee anti virus scans and not found problems (using the latest software). The detail showed the so-called ", PID4 NT kernel and system" using 18% avialable CPU capacity, but this process is not always shown to use much more capacity when the slow performance occurs. Nothing else don't use much capacity CPU, I see.

  More recently, the capacity of the CPU became crazy, jumping from zero to 100% usage in a back a suite oscillation. When I shut down and restart, performance improves, but erodes little by little over time.

  Is this a sign of a virus, or is it a problem with the recent Windows updates or some kind of conflict with my software such as McAfee? How do I tell me what to do? Anyone else have this problem with the recent Windows updates?

  Help!  Thank you!!

  McAfee applications (and Norton) are known for not not upgrade (or uninstalling) itself.

  1. download the McAfee Consumer Product Removal, save it to your desktop tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. now run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  NOTE: Step #2 McAfee fix run the removal tool, you have already downloaded in my step #1 above.

  4 IMPORTANT! => After the reinstallation of the McAfee application (step #3 of the McAfee fix), manually & repeatedly updated the McAfee application, until you get a prompt "no update more".

  5. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  6. OPTIONAL: For good measure, pen also Internet Explore (only) to http://support.microsoft.com/kb/971058 & race that secure it in DEFAULT and modes and AGGRESSIVE. [1]

  7 restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• CPU use 100% for the NT kernel & system

  On the Task Manager CPU usage is 100% for the NT kernel & system so my PC is going very slowly
  AMD Athlon X 2 7750 2.7 Ghz
  2 Ghz of RAM

  Hello

  See following message if you suspect malware has a role to play.

  CTRL SHIFT ESC or right click on taskbar - task manager.

  Manager of task - performance tab - resource monitor - any info on what might be executed on the
  CPU box (click on the small neighborhood down right).

  What happens in Mode without fail - repeatedly, press F8 as you boot?

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• High CPU use InDesign CC on Macbook Pro

  Recently, InDesign CC on my Mac started periodically fortification CPU usage without reason decernible. When sitting idle without documentation open, ID uses anywhere between 100 to 190% of CPU. When you use it with a document open, this will draw up to 200-290%. This, of course, creates a lot of heat that sting fans. The spikes occur with regularity, usually every 10 minutes.

  It is very worrying when my laptop fans run at full speed for hours at a time when the workload must be low. The fact that he uses as much time CPU when sitting idle is clearly a problem.

  
  

  What happens and how can I fix it? I would rather Cook eggs on my machine.
  

  OS X 10.11.3

  Looks like this: CEPHtmlEngine slows down the solution and computer (Mac).

• Should have 8 000 emails in my Inbox Windows Mail (Vista) considerably slow down my computer with 3 GB of RAM and trigger alerts from Norton of "the High CPU use by Windows Mail.

  In addition, about half of my 8,000 e-mails are unread. Thus, the fact of having 4 000 unread emails in my mailbox Windows (Vista) slow down my computer more than if they were 4 000 read emails?

  If so, is there a quick way to mark all read emails as read in Windows Mail (Vista)?      .. .in windows Live Mail (Vista)?

  Even if these unread e-mails degrade the speed, is there a quick way to mark all read emails as read in Windows Mail (Vista)?... .in windows Live Mail (Vista)?

  I also regularly get an alert Norton of 'Use of disc high by Microsoft Windows Search Indexer.'  Gravity is the next, and what can I do to fix the problem?

  Finally, I have a lot of folders: would have 2,000 emails in the Inbox Windows (Vista) slow down a computer more than if 2 000 mails were one or more files?   This change of response if the e-mail is unread vs bed?

  #2: the Inbox is accessible by your computer whenever he asks new messages. The fact of having 1,000 messages in the Inbox slow it down? I have no personal experience, since I never have more than a dozen or messages in my Inbox, but it is so likely. If you have lots of free space on the hard disk, the messages would be better in another folder (s). Even if you create more WinMail's local folders and move messages to them.

  I would also say this. Try to compact and repair the database.

  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx

  It can be very useful, and it can't hurt anything.

• high cpu use-50-85% kt core uses it. can be linked to an update of windows that will not be installed. Vista Home premium 32 bit service pack 2.

  all started 3 days ago. I thought it was fixed from the start in safe mode & run a scan completes. (Either said by the way cpu still works 80% of the nt in safe mode kernel)

  Hello

  1. are you facing problems during the installation of Windows update?

  2. don't you make changes to the computer until the problem occurred?

  I suggest you to try the steps below and check if it helps.

  Method 1: Try to put your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 2: Try to scan your computer for the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Hope this information is useful.

• 2008 and high CPU use ws2003

  I'm trying to understand how to analyze the use of the UC WS 2003 and 2008. How can I find the process causing the problem and newspapers for days. Please help me

  
  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

  They will ask you to run a trace of windows performance

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask
  
  
  Please run the trace when you encounter the problem

• HP mini5102 interruption using high CPU after sleep / resume

  I have the same problem described recently (without solution) on the Forum of Support HP Business. After resume from sleep, 5102 HPmini consumes constantly about 30% of the capacity of the CPU even with the system at idle. Sunny (0-3% CPU use at idle) before going to sleep. As Roderick Laird (copied below) I've already got rid of wireless assistant that caused a different problem of high CPU usage (100% CPU use even before you sleep / resume, now fixed by an update of the version unless served for those who want to keep the wireless assistant).

  Consumption of futile processor by 30% after standby/sleep is due to material interruptions (revealed by Sysinternals Process Explorer). I understand that may be due to problems such as several drivers attempting to control a device (for example, after a faulty update). But I have no idea how find the offending device or drivers.

  My guess is that many owners of this model simply did not notice the problem and they areassuming the poor performance is due to the atom processor netbook. You must use Task Manager or performance monitor to view CPU usage high, and process Explorer to find it hardware interrupts.

  If anyone has found the cause / solution?

  HP, help to resolve this issue please--nobody wants netbooks HP fall into the category "do not buy" due to persistent problems with the futile CPU usage. The HP mini 5102 is the flagship model!

  Ref:

  "Author subject: HP mini5102 interruption high CPU usage after standby Roderick Laird 24 March 2010 04:03:03 GMT - I see of other HP5102 users having problems with high use of the processor of the Wireless Wizard operation amok; I avoided this by disabling the corresponding services. But one problem remains. The system works beautifully/effectively from a cold start. However, if I go back I think that interruptions are consumes about 35% of the cycles CPU. Not something that I want to pass battery on. I made sure that all the drivers are the latest versions according to the HP support site. I also tried disabling the obvious drivers that might be wrong (wireless, ethernet, audio, non-touchpad mouse)... »

  Update the Intel AHCI 9.6.4.1002 driver (iastor.sys) removes the futile CPU usage after sleep from 30% to 20%. This is not in the drivers of HP, but is available at Intel. Subsequently the chipset driver updates might solve the problem. In the meantime:

  Disabling in BIOS Drivelock completely eliminates the problem!

  Apparently users who want a computer that is useful after sleep / summary to know somehow ignore the advice of stern of HP in the BIOS that Drivelock is recommended for safety.

  It cost a lot of time to resolve, with no whatesover help to be published by HP. My consolation is that by systematically eliminating all the bloatware and other services-waste of unused resources, pilots and scheduled tasks automatically loaded on the system (while trying to find the cause of the CPU / interrupt use) I now have a mini 5102 (SSD) that:

  * Cold boots Win 7 Pro 32 in less than 30 seconds (including wireless access)

  * Stops in less than 8 seconds

  * Beds / back in 1-2 seconds

  * Consumes less than 600 MB of RAM at idle

• I can't delete my c drive Epson fax software, I get a message that says efxijrmv.exe fax software Epson using high energy use 99% CPU

  I am trying to remove all the printing to epson artiasn from my computer software, I use Windows XP. I can delete all except Epson Fax software. My norton 360 opens with a note saying: high energy use Epson Fax software 99% of CPU usage. I called Epson, they cannot help me remove the program. I spent 6 hours trying to remove the program, I did a full scan for all and all the viruses I tried to delete 100 times (the envy) and I still can't get out this Norton tell me that it's on an efxijrmv.exe file but I can not locate this file you can help me. I couldn't afford your 800 number to pay for the service, I just lost my job after 40 years in the business. Is there something I can do?

  Thank you

  Phil

  Hi Phil,

  Follow the steps in the article.

  How to solve problems when you install or uninstall programs on a Windows computer

  How to manually remove programs from the add tool / remove programs

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

• MSE is now using 100% of CPU

  After installing MSE and before to perform a full scan, the cpu use is very low. After complete scanning, use the cpu went to 100 percent. MSE useage varies from 4 to 100. Explorer.exe uses up to 65 percent. msseces.exe also shows high useage, as well as the system and Task Manager. There was a menu popup saying that mse had found possible infections. I clicked on OK to clean. Nothing has changed. Suggestons?

  the complete analysis in 'safe mode with network' to help

  http://www.Malwarebytes.org/

  http://www.SUPERAntiSpyware.com/

  and also your anti-virus

  If the problem with mse I would recommend avast:

  http://www.avast.com/en-GB/index

• Use Windows 7 CPU to 100% only when it is plugged

  I post this topic only because my problem is quiet unusual. I found hundreds of topics related to 100% CPU usage in Windows 7, but none of them was related to this over-consumption of the processor during the charging of the battery. There is also a situation that 100% of CPU usage occurs while working on the battery, but my case is completely the opposite.

  Windows 7 x 64 prof. system goes to 100% CPU use occasionally and it becomes impossible to work. then all of a sudden, the problem goes away and everything works right. After a few days of work without problem the problem returns and so on. I did the fresh install several times and the problem appeared immediately after the installation of the system every time. Finally, I discovered, that it lasts only when the charger is plugged in when you are working on the battery, everything works correctly. pluggng immediately after the CPU reaches 100% usage and so on.

  laptop HP Compaq 6710 b, Windows 7 x 64-teacher system.

  Help!

  Hello once again, Andre. Thank you for helping me. I tried to find such a framework (high precision event Timer) in my BIOS, but I did not: it seems to be fixed on my laptop. However, I found it in my Windows Device Manager and I have disabled HPET here, but it did not help in any case - there is no change in the use of the CPU (always 100%).

  BUT - I found an effective solution on my own! The thing was very simple - it was the fault of my power cord to the AC adapter / CC. I tried my colleague adapter and CPU usage dropped sharply to 5-10% on idle. Then I plugged my power adapter - use has exploded to 100%, and again, I used my colleague adapter - use declined.

  THE REASON FOR THE HIGH IN MY CASE CPU USAGE WAS DEFECTIVE AC ADAPTER

  It was a big surprise for me, because the problem occurred only from time to time. Apart from this, the laptop work properly. I tried hundreds of things, including the reinstallation of the system 3 times, change a hard drive (which seemed to make some strange sounds), my memory test, install the latest drivers from HP, change settings loading, etc. Only after buying a new battery (the old one was not operation at all) I noticed that the problem goes away after unplugging the AC adapter.

  I lost a lot of time trying to solve this problem and it was very frustrating, I also found that a lot of people have similar problems, so if you, dear reader, have 100% CPU use problem, unplugg your power adapter first know, that it's abandoned.