Satellite A-C50-1KQ - WIFI is connected but no Internet access

Hello!

Today, I bought a laptop TOSHIBA SATELLITE of C50-A-1KQ and my problem is:

When I am connected to my Wlan status says I'm "connected" to the Internet and everything is ok, but I don't have an Internet connection. With a cable, everything is ok, but not with Wlan.
My driver for the card is 10.0.0270 (17.10.2013).

Can U help me pls?

Siana

When you open option networks make sure airplane mode is set to OFF, Wi - Fi on IT and I guess that your WLAN is also in the list.
You have the signal full force and the State connected?

What happen when you try to open a page in the Web browser?

Tags: Toshiba

Similar Questions

  • Equium P200 status 'connected' but not internet access.

    I have an Equium P200 and finds it difficult to connect to a wireless network.

    I have the wireless key and all the information is correct.
    Status is connected to the network, but I have no internet access and the message is: connection to the local network only.
    I live with two other people who have access, but I can't access the internet.

    How can I change this?
    Thank you.

    Hello

    Please check in the WLan settings if the TCP/IP protocol settings are set to automatic.

    Usually, the WLan router supports a range of IP addresses and assigns an IP address to the laptop of the range of IP addresses.

    You can find this setting here:
    ->-Connection network WLan-> properties > network connections (TCP/IP) Internet Protocol-> properties

    Also, check if your WLan encryption settings are right!

  • Connected but no internet access (E1200 with laptop Acer Win 7 x 64)

    Whenever I come back from a stay in a motel, there are problems to be connected again to the House.  This time, I show that connected to the network wireless 2, but no. Internet access connection.  Yesterday, I figured it out and got things, but today it happened again and I don't get it.  See network properties properly, including appropriate security key.  When I ran Win 7 Network Diagnostics, he returned that I didn't have a valid IP address.  I have reset the router and even unplugged for a minute.  All this time, the ' currently logged on: "network in the sys bar icon showed the Summit he was trying to connect my network name to the internet (downstairs, the network showed as connected, probably by a router).  Another thing I did was to support IP services and disable and stop, then after restart it a few minutes.  Nothing.

    But wait!  As I finished typing the last sentence, about an hour after I started the laptop, the first time, I opened center network & sharing once more and suddenly between the name of my computer and the Internet has shown the name of the network, instead of "no internet access."

    So, what could be going on here?  (1) why should he take 50 minutes to make the connection?  (2) why do I have problems every time after the use of wireless network from a motel?  Thank you

    Update: resolved for now.  I started using the safe mode with networking, which required the implementation of msconfig as F8 does not work.  Which required a repair of the system, and then restore it, and finally I was able to follow the instructions at http://forums.techguy.org/networking/950031-cant-get-valid-ip-address.html.  Solved.

  • Wireless connected but no Internet access

    I have a new (5 months) Acer Aspire 5732Z which works in Windows 7. Wireless connection shows that it is connected (full bars) but I have no internet access (there is a signal of yellow exclamation over bars error). I have another laptop running Windows XP which connects well to the same wireless router and wireless for Acer worked very well so far. I was on the phone with my ISP and they said, because it shows that the computer is connected to the wireless, they cannot help me. Anyone has any ideas that can help me?

    Thank you. I decided to call my Internet provider again and this rep was able to solve the problem without delay. From what I learned, if you get a representative who was not helpful, call again...

  • Ethernet or wireless is connected but no Internet access

    My laptop OS is Win 7 64 bit. My laptop able to connect to the internet, but it suddenly can't connect to the internet via the Ethernet or wireless. I tried to system restore and it worked fine, but after I stopped, the problem was took place again. I don't know if because of the McAfee antivirus or window updates because it has some errors (to McAfee) and Skype has been updated before I had this problem (no internet access).

    McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

    See the communication from this "criticism" - McAfee

    Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

    You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  • loss of internet connection on windows 7 pro 64. Says connected but no internet access with yellow exclamation point! Help, please!

    I keep losing internet connection, I have windows 7 and every time I connect it to the wireless internet works for 5 minutes, then a little ytellow icon pop up and say its connected without internet access. Its happened to me before and recently started happening to my cpu. I did a FRESH install of windows to see if it can help, but it didn't. IM literally on the point of throwing my processor through the cause of wall, I can't find a solution to this anywhere. Whenever the yellow icon pops up that I have troubleshoot and it indicates the default gateway was unavailable and that fixed it, then I have internet again for about 2-5 minutes and it does the same thing. Ive never had this problem on my cpu and the network has not been changed or anything, so I don't know what that the * could cause this. I literally wiped everything on my cpu and then do a system image to restore too. Ive been messing around with the registry, deletion of things here and there missions that I read, but only thing that happens is losing internet alltogether and must restore from system image. I'm really running out of ideas. Help, please. I have an adapter netgear wn311b wireless pci-express with the latest drivers.

    to detect new updates for network based components on intel:

    http://www.Intel.com/p/en_US/support/detect/?IID=subhdr+dnlds_detect

    You will be asked to download and install active x components.

    After the installation of the small file, click on the "expand all" button

    You can choose to update your components wired network if necessary.

    then re-install your wireless network management software.

    assuming that your wireless network is intact (connected, permits), you can surf the net.

    If the problem persists, troubleshoot more away:

    When the computer is turned off, set again you netgear pci wireless adapter.

    set of antenna for optimal orientation.

    Check if your computer is authorized by your wireless router.

    check the signal strength of your wireless router and the wireless pci adapter.

  • Connected but no internet access? ... Help

    Hello

    If someone could help me that would be great!

    I rented a House and do not have access to the modem. I have a 2 year old HP laptop. When I connect to the internet it says connection to the internet and internet access. then, when I try to watch a video or anything of that kind, a yellow error sign appears in the signal at the bottom bar. It then says connected without internet access!

    Why is it that / is there a way to fix it? I need to start the work of the school and it does on every 10 minutes and I have to disconnect and reconnect!

    Can anyone help?

    Thanks in advance!

    Hi Helpthisgirl22,

    1. are you using a cable or a WiFi internet connection?
    2 have had any changes made to the computer before the question?
     
    See the methods mentioned below and check:
    Step 1:
    Why can't I connect to the Internet?
     
    Step 2:
    Windows wireless and wired network connection problems
     
    Hope this information helps.
  • Strong wireless connection but no internet access

    I am able to connect to the internet via a cable modem, but when I try to use my wireless router I don't get access to the internet none despite the excellent signal strength. My information on the two devices match. I can pick up other signals fine just not my router wireless.

    2010-06-17 13:51, primer McCapps wrote:
    > * I am able to connect to the internet via a cable modem, but when I
    > try using my wireless router, I get a no Internet despite
    > excellent signal strength. My information on the two devices match. I have
    > can be challenging other wireless signals very well just not my own router.*
    >
     
    What do you mean by "information"?
     
    What do you mean by "just not my router? Do you mean that you do not have
    see same SSID of your own router (network name) in the list of available
    wireless networks? If so, connect to your router with an Ethernet cable,
    Enter the router configuration utility and make sure that the SSID
    broadcast is set to 'enable '. If your router is already configured to
    broadcast its SSID, and you don't see it well be able to see the other
    near wireless networks, the portion of your router wireless is
    cut or broken.
     
    Generally, symptoms such as you describe are caused by a defect of
    to authenticate to the router, usually due to a mismatched
    password encryption.
     
     
     
    --
    LEM
     
  • WiFi connected but no internet access

    Good so far, didn't have any problem with internet on my mac mini.

    It connects to my ADSL hotspot and mobile phone, but I can't access the internet or browse.

    In Network Diagnostics it says "internet - failed" and "Server - failed".

    These connections work on my laptop and mobile.

    I tried several times to change the DNS, reset the modem and fiddling around with everything I can that could possibly help without result.

    I forgot to add that the internet is perfectly fine in recovery mode

  • T510 - wireless question - connects to the local network but no Internet access

    Hi all

    I have a laptop Lenovo T510 with Windows 7.

    Network adapter: Intel Centrino Advanced - N 6200 AGN with the version of the driver 13.2.0.30.

    I am facing problem seroius in wireless connection at home, I am able to connect wireless instead of office and friends.

    Wireless Networks are detected and I can connect to WiFi by the way of the key. And the status is indicated and is connected but no internet access.

    Please help me to get this resolved.

    Thank you

    Pavan K

    Thank you all for your support and your help... its working fine after re-starting the router

  • Satellite L455-S5045 laptop Realtek8187B wireless 802. 11b / g connects to a d-link router, but not internet access.

    PC laptop Toshiba Satellite L455-S5045, Realtek8187B wireless 802. 11b / g connects to a d-link router, but not internet access. go to google.com and States page cannot be displayed, I ran diagnostics and reports, everything is configured properly. the wireless signal that d-Link has is 802.11n with a WiFi Code and running XP, I have WIN 7. Do I need to driver 802.11n, if I do, why I can not download it

    Hello

    To help you better, please answer these questions.

    1. don't you say no Internet access in the notification bar?

    2. what diagnosis you have to run?

    3 did you do changes on the computer before the show?

    To solve your problem, try the provided items.

    Why can't I connect to the Internet?

    http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

    Wireless and wired network problems

    http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    You can check the link:

    Troubleshooting Wizard

    Reference (my computer can not connect to Internet)

    http://support.Toshiba.com/support/troubleshootSelfService?PRDTYPE=computers

    If you need help with the Windows operating system, just tell me and we will be happy to help you.

  • WiFi is connected but I can't connect to the net, what to do?

    WiFi is connected but I can't connect to the net, what to do?

    Hi Torrespa,

    1. what happens when you try to connect to the internet?

    2. were you able to use the Wi - Fi connection earlier?

    3. what brand & model of network card?

    You can follow this link & check if the problem persists:

    How to fix wireless network connections in Windows XP Service Pack 2?


    Reference:
    Wired and wireless in Windows network connection problems

     To set up automatic wireless network configuration

    Hope the helps of information.

  • My computer says I am connected but my internet says cannot display this Web page

    Vista connection problem

    I have windows vista Home premium. my computer says I AM connected but my internet says cannot display this Web page. This isn't the site because I tried other websites

    Hello, Scottyookiss00,

    Launch IE without Add-ons

    Start > type Internet Explorer

    Select Internet Explorer (No Add-ons)

    You are able to access the site now?

    If so, reactivate the modules one by one to determine the origin of the problem.

    Try the steps here:

    http://support.Microsoft.com/kb/956196

  • Cisco vpn client to connect but can not access to the internal network

    Hi all

    I have a VPN configured on cisco 5540. My vpn was working fine, but suddenly there is a question that the cisco vpn client to connect but can not access to the internal network

    Any help would be much appreciated.

    Hi Samir,

    I suggest that you go to the ASA and check the configuration to make sure that it complies with the requirements according to the reference below link:

    http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml

    (The link above includes split tunneling, but this is just an option.

    Please paste the output of "sh cry ipsec his" here so that we can check if phase 2 is properly trained. I would say as you go to IPSEC vpn client on your PC and check increment in packets sent and received in the window 'status '.

    Let me know if this can help,

    See you soon,.

    Christian V

  • 8 win having address IP & gateway, but not Internet access

    This laptop is IPv4 address 192.168.1.13 (valid for my setup) and gateway 192.168.1.1 (even), but no Internet access? What is going on??

    I've implemented a number of victory 8 machines, but this laptop that I just got and win update 8, now, will not connect to the internet?

    All my other machines, phones, computers, iPad, android tablet, all to connect to the router and have internet access.

    I searched this problem and tried a few suggestions to no effect:

    1. drivers of device updated for lan and WiFi and restarted and still NOGO!
    2. has run a few commands cmd for ipconfig

    What is going on??

    Thank you very much for any help you might be able to provide!

    -Brian

    Brian

    Please download this app from the
    Run it
    Download output to a drive or any file sharing service
    Put a link to them in your next post
    Please enter each of them in a command prompt high after you run the above and save the file

    ipconfig/flushdns

    ipconfig/registerdns

    ipconfig/release

    ipconfig / renew

    NETSH winsock reset catalog

    NETSH int ipv4 reset reset.log

    NETSH int ipv6 reset reset.log

    Output

Maybe you are looking for