CPU frequency and bus on Satellite M30 is too low

Similar Questions

• Satellite A210 - 16G - problem of CPU frequency and memory

  Hey guys,.

  I had a problem with my laptop I can't solve, since I installed windows 7 RTM x 64 version.
  I noticed something is wrong after finding that my Windows experience index has fallen to 2.7 instead of 4.5, I used to have on Vista. For those who do not know my characteristics are:
  AMD Turion 64 X 2 TL-60, which I've got 2.7 of note, 4 GB Kingston DDR2-667 (333 MHz) - 4.4, scores of charts and hard drives are the same.

  I read in one of the forums that it may be a problem with the standby power options, but he did not get any option that says on the frequency of the processor changing according to the plan of the power. I also installed new version 2.0 of the website of Toshiba BIOS, but it only makes things worse: I've got 6.0 rating graphics of games but the Perf of Aero desktop is now 1.0!

  I installed diagnostic software: Everest and CPU - Z and I discovered that my CPU works with a frequency of 800 Mhz (the multiplier is 4 x, voltage 0.8V) and my DRAM frequency is 159.8 Mhz (I don't know if it's ok, but I know that 4.4 score is certainly too low although).

  So tell me guys, is this a problem of the operating system? Should I try to install the 32-bit version of Windows 7, or it won't change anything? Maybe I should try some software that would change the frequency of my FSB?
  I'm waiting for your answers, because I don't know what to do.

  Paul

  Aero needs a WDDM compatible graphics driver, then try to update the graphics driver on the Toshiba site

• Satellite M30-154: too weak CPU frequency

  Hello

  I'm Valerio... and I have a little problem with my Toshiba laptop.
  I changed the motherboard of the laptop and the keyboard with another Toshiba original.

  After changing the CPU frequency is set at 599 Mhz while the CPU should be 1400 Mhz.
  Why? I don't understand...
  Can you help me?

  Thank you!

  --
  Valerio

  After Exchange of DMI motherboard information must be rewritten.

• How can I check sound version and watch on Satellite M30 power?

  I have a Toshiba Satellite M30 series and have lost my audio. I don't know if I checked something l ' turn off or what. Can someone give me some ideas on how to check it? The other is stupid - how do I know what saving use?

  Right now my setting is on Power Saver 2 and I'm having problems, that I found an answer to this, of overheating, but it was suggested to check the energy saving, how do you know that one to use?

  Any help will be appreciated.

  Hello

  It's very simple. You should visit the Toshiba driver page and you will find the correct drivers and utilities also energy saver.
  After the installation of the power saver you use defined parameters. The cooling method, you can define if you want to cool the most powerful CPU for maximum performance.

  Now on your noise problem:
  Well, first go to Device Manager and check the status of the sound card.
  If there is everything is fine and there is no exclamation point yellow if all the drivers are installed and working properly.
  In this case I recommend to enter the control panel and select the Audio & Sound devices. There you can check if the 'secret' was not enabled and if other controllers are defined at the higher value.

• Unable to do anything on Windows and get an error "resolution is too low to open it."

  Original title: resolution problem

  I can't access anything even in the start menu. "The resolution is too low to open this App" I get this error when I try to access, reinstall the window and delete everything, gain 8.1 pro. I installed the igi2 game played he changed his resolution and closed it the next time I opened it and the resolution has been reduced I pressed alt + F4, then that things went wrong.all features of office and start manu are partially visible. I find no way to increase the resolution or reinstall the window!

  Hi Anas Tahseen Asar M.,

  Thanks for posting the query on Microsoft Community.

  I am sorry to know that you are unable to access anything on your computer due to problem-solving. ALT + F4 closes just the window/program/app which is open. Don't worry, will help you with the question.

  You can try to change the resolution by following the suggestions in the link below. JosephiineN said on October 24, 2013:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/win-81-resolution/8ad401e0-9553-4f1c-8b11-ea6d4d53df70

  Registry warning

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows.

  You can see the thread below to update the display drivers and install Windows updates.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_store/screen-resoluition-is-too-low-on-my-NetBook-to-run/8e339454-B90A-44A9-a58f-73098cac904f

  I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you.

• My very low CPU frequency drops...

  Hello! I just bought an Alienware x 51 R3 and when I look at the AlienFX command center, I'm going to OCControls to take a look at my cpu frequency and I'm still at 0.90 to 1.20 GHz.

  No programs are open except Google Chrome.

  My processor is: Intel (r) Core i5 - 6600 k CPU @ 3.50 GHz

  Even when I click on the button to overclocking, it is always in the vicinity of 0.90 GHz.

  You will probably get a better response if you re - post it in the forum of the Club of Alienware .

• High temperature CPU on Satellite M30

  Hello

  I have a Satellite M30 852 with Pentium M 1.5 GHz processor. My problem is that the heater does not start until the CPU temperature reached 70 degrees, which I think is a bit high, no mention that when it has reached this temperature I can not keep the laptop on my legs because it burns... and also to kind of warm around the touchpad and left side of the keyboard.

  My question is if there is any software I can use to take the cooler start at low temperatures, to keep, or if there is no setting I can adjust the laptop utilities to solve this problem (in addition to throttle CPU cooling where is defined in the performance).

  Thank you all in advance!

  Could PS: Anyone tell me which button support when starting, to get into the BIOS...? Because the F1, esc or del does not work.

  Post edited by: master of ceremonies

  Hello

  The temperature of 70 ° C nothing unusual and in my opinion not too high.
  Is that it s not recommended to use the laptop on your legs or in bet, etc.
  You should always be sure that there is enough free space (left, right, bottom) around the laptop for the circulation of fresh air!

  Usually, the Toshiba power saver controls the cooling method and the CPU processing speed. If you want to change some settings you should the fact in the basic power saver menu.

  PS: on m30 the phoenix BIOS has been installed and therefore, you should use the F2 key.

• Upgrade CPU on Satellite M30 106

  Hi people

  Could with help please?

  Just got an old Toshiba Satellite M30-106, a few weeks ago and [to be fair] it works OK with xp on it. I bought another 2 gig DDR which brings speed wise difference, but I can move the processor to the Intel® Pentium® M processor 725 1.60 GHz FSB: 400 MHz, 2: 2 MB level cache that s in there earlier?

  Can she take a CPU more high if so what s the highest? Would be very graciously tips please.

  Thanks in advance...

  At first, I must say that I agree with you that this laptop will work with Windows XP Home edition. At least this laptop model is designed for Windows XP Home edition. ;)

  I found some info on the processors on Satellite M30:
  + The Satellite M30 computer is equipped with a processor Intel Banias who +.
  + integrates mathematical co-processor, memory 64 KB of L1 cache and a 1 MB L2 cache.
  + memory. The processor works with one of the following speeds: +.
  + Processor Intel Banias 1.40 GHz (1.35v) / 1.20 GHz (0.85V) +.
  + Processor Intel Banias 1.50 GHz (1.35v) / 1.20 GHz (0.85V) +.
  + Processor Intel Banias 1.60 GHz (1.35v) / 1.20 GHz (0.85V) +.
  + Processor Intel Banias 1.70 GHz (1.35v) / 1.20 GHz (0.85V) +.

  Then maybe you can use the fastest processor 1.70 GHz. I don't think you'll see the difference.
  Best thing you can do is upgrade RAM to max and optimize Windows XP Home pre-installed, and you will be happy with this good old classic.

• Satellite M30-344-CPU cooling fan noise

  Hello world...
  I have a satellite m30 344... it is 1 1/2 year... and now, I had a problem with my cpu... fan is making a horrible noise... and the air flow is not good...

  I'm looking for how clean my fan... I removed the keyboard and I also took into consideration... but could not find any access to the cpu fan...

  can someone make a suggestion how to clean the fan to the processor in my laptop?

  THX
  ascorbin

  Post edited by: ascorbin

  Hello

  In my opinion, it's a very bad idea to open Notepad on your own. As you know that books are very sensitive units and if you have no experience you shouldn't do this. I guess that the guarantee is valid for two years and open Notepad, you can void your warranty.

  I'm sorry, but I put t see any means cleaning without dismantling because there is no cooling grilles of ventilation and air in the lower corner. On some laptops from Toshiba, the of cold air is visible and the cleaning procedure is much easier.
  Before doing something wrong contact partner in your country. It is also possible that there is a problem with the CPU fan and it can be exchanged.

  Good bye

  Post edited by: Barrie

• Satellite M30 and new driver nVidia - after the awakening of the screen stays off

  I have Toshiba Satellite M30. Recently, I installed the new nVidia 9.1.3.1 driver (summer 2006) and after that, I started to encounter problems with wakes my notebook of booth mode and a problem with the power of the monitor.

  If computer sleeps or its monitor is turned off and I try to make it work again it hangs with a black screen (although I can see slightly backlight) and doesn't react to anything except the hard reset. What should I do? Going back to the old nVidia Driver?

  Windows XP Pro SP2 + all updates update MS. nVidia FX Go5200 video card

  Hello

  If you use the drivers directly from nVidia it can cause problems, because they are not designed for laptops. The downloadable driver of Toshiba for this model is the 46,44 version. If you want a newer driver, you can watch the new laptops with nVidia card. Or you can search the Internet, maybe you'll find a driver updated for notebooks somewhere.

  Good bye

• Satellite M30-107 - guard wireless disconnect and never connects

  My Toshiba Satellite M30-107 with Intel (r) PRO/Wireless 2200BG Network connection is not connect wirelessly. I know that there is no hardware problem, because I used this laptop to different wireless networks in the past, and just recently I formatted my laptop using the recovery disk Toshiba gave with it.

  I set up the wireless entering the SSID and network key. But the wireless connects with the Excellent signal is only for a second and then disconnects, then reconnects, disconnects. After doing this for a while, it remains offline.

  How can I do to connect and stay connected as it should?

  It is not easy to say why all this happens. I also think that your laptop works well, then maybe you should check the router. Reboot the router and check the WLAN connection again.

  For a moment turn off WLAN protection and check if the same problem happens without entering the network key.
  Setting router to run on 802. 11 b / g only and check again.

  Play with these settings. Have you bought a new router? I mean if everything was OK in the past I m wondering why you are facing this problem now.

• Some keys don't work no and Satellite M30 - 10 beeps

  Hello

  I have a weird problem on my Satellite M30-10seven.

  When I press some letter keys on the keyboard, that they do not work and the laptop will beep.

  It started with miuj updown seven point eight right has failed.
  But now I did and by commas and down and 8 make too as well as right.

  I also choose the Boot option to the power upward I never had before and sometimes internet explore trying to full screen.

  Probably not a key is pressed? Because as I said affect only some keys.

  Since writing this j stopped again.

  Any ideas?

  Try an external keyboard and see if that fixes the problem. If so, your keyboard needs to be replaced. If this is not the case, the keyboard on the motherboard controller has gone bad and you need a new motherboard. Also, try to download the update to the BIOS and see if that fixes the problem. Good luck.

• Satellite M30 - beep Constant and powers On / Off by itself

  Last night I turned on my laptop Satellite M30 Special Edition and the login page appears, as usual. However, after entering my password the screen just went black and is stuck like this. After waiting a few minutes, I turned off the computer (hard restart my only option) and that's what Toshiba technical support told me to do the last time this happened (a few years ago). This is where the real trouble started.

  Tried to come back on the computer, but in addition to the white screen now is a constant beep sound (like a key is stuck perhaps). The only way to make the beeping stop was soft reboot of keys, which I did several times. CTRL-Alt-Del would stop the noise and computer would shut down for a few seconds, but then immediately join the beep goes again. I finally managed to get it remains powered off mode, which is the way he currently remains.

  I tried to unplug the AC and remove the battery and nothing, which makes sense. Just AC, he did the same thing, so try does not seem to be a battery problem. Tried to power a few times and always the same situation - white screen, the beep and the need to hold the power button for a few seconds get the machine to stop and stay off.

  Help, please!

  June

  P.S. I contacted support and they suggested to bring it to an authorized service center, but I don't want to pay large sums of money to fix something simple and and I don't want to pay for a serious problem that can't really be healed/fixed. Any advice or suggestions on what could be wrong would be greatly appreciated.

  Looks like a hardware problem - probably the motherboard. The only solution would be to take it to a repair center.

  I hope it's just a change in minor liquid that has damaged the keyboard, which should not be expensive to replace.

• Satellite M30 742: need Win XP drivers and tools

  Hello

  After running my M30 5 years without problem, I had a fresh install of windows XP.
  No problem. But now I can't find a few drivers and utlilities. Or those I found does not work.
  is not owrking:
  fn - keys (for brightness and soundvolume etc.)
  -LCD screen saver. My screen fades always if I change powersource.

  The fn keys I really need, since I use my computer laptop a lot with a second screen or projector.
  The control utility of the poweruse on the LCD is pretty handy too. But all I get is a program error.

  I used the cd with the drivers that came with the laptop. But when it does not work I tried a few drivers I found on the toshiba site. But still no luck.
  I have an infer M30 742
  Can someone help me?

  Thank you

  Hello

  You can find all the drivers for the page of the European driver Toshiba Satellite M30.
  But the M30 is a former series of notebook and that's why pilots have been moved to the archives.

  In the first option called product type, just chose Archive instead of the laptop.

  See you soon

• Satellite M30-107: WPA and WEP security software

  I want to connect my Satellite M30-107 P - M 745 to a network of wifi MIMO inverters to date.
  I bought a router and a PCMCIA adapter.
  I wish security WPA and WEP setup - I need any special software Toshiba on the PC itself to do so, or simply use the software that came with the router and adapter card?
  Thank you

  Hello

  There is no software Toshiba for the WLAN settings. Toshiba has created the only monitoring software called ConfigFree. By using this software, you can watch the WLAN and LAN connections. This software can also help you identify a connectivity problem if occurs.

  Back to your question: for WLAN settings, you can use the standard Windows WLAN settings or use WLAN data by software adapter settings. Please, make sure the wireless network adapter supports WEP and WPA encryption and also make sure you use the right settings on the router.