CPU usage monitor shows only a large cpu usage screen

Similar Questions

• Windows resource monitor shows only a CPU core when he should have four.

  Windows 7 Home Premium 64-bit, SP1
  Intel Core i3 2330 m-hyperthreading

  Resource monitor normally indicates two nuclei and Hyperthreaded (a total of four graphs) when seen on the tab CPU recently single core (one graph) is displayed. This change is caused by one of the updates of Windows or an indicator of a hardware problem? Is there a recommended KB or a patch that solves it?

  original title: change of resource monitor (?)

  You asked: "what version of Windows 7 do you have?" ... Home Premium x 64, SP1 as indicated at the beginning of my first post.

  As my screen name, incurably curious, says I couldn't let it go. Assistance in the meantime, I searched tirelessly and found a cure. I had to make a change through msconfig. I don't have any idea how the settings have been changed because no one else is using this machine.  [????] (Microsoft Security Essentials and Malwarebytes returns own scans; so I doubt that the cause is associated malware.) The following explains what I've done and the results.

  1. I went into msconfig > startup > advanced options and find the number of processors, set one. The arrow to expand a menu drop-down has also shown that a single processor. Which did not make sense because my processor Intel Core i3 2330 M's two core with hyperthreading.
  2. I unchecked the box and restart the computer.
  3. I returned the number of processors as described in #1 above. Expand the menu gave me the choice of 1, 2, 3 or 4 processors. I chose two and checked the box.
  4. I rebooted the computer again.
  5. I checked the monitor of resources (via the Task Manager) and found multiple graphics, I'm used to the display. The graphics are labeled: Service use of the CPU, CPU 0, 1 parked CPU 2 CPU and CPU3 parked.
  6. Parked CPU1 and CPU3 parked show no activity, which is expected. These show only activity when hyperthreading is active, which is rare with the programs I run. Only programs written specifically to hyperthreading use the feature.
  7. CPU utilization service CPU2 and CPU0 show activity as expected.
  8. Manager tasks shows four graphs still now.

  The reason why I know not what to expect is that I have upgraded RAM and completed cooling there are a few months and one of my tools use resource monitor to control the computer. (I used other means to monitor the internal temperature). I managed to run enough programs to use more than 7 GB, the 8 GB available RAM and CPU usage Dungeon in the range of 75 to 100% for more than an hour during trials. Hyperthreading (CPU1 and CPU3) clearly indicated to be active too. Time CPU ran in the range 165F without additional cooling and order of 125-130 with additional cooling.

  I will wait for return of the answers with explanations and/or questions until I got this mark as resolved.

• The program monitor shows only half of the picture

  Hi I'm new in preview, for some reason any when I open a photo in the program monitor, it shows that half of the picture, straight cut, in the Center (see below). I used to be able to see the entire photo and add the title and text to it.

  what setting should I bring back to normal?

  

  The first thing I would look at is the Sequence of parameters - click, on the top menu and ensure that the settings are - post a screenshot please. Your program monitor looks like a size extra-large, much wider than the standard ratio 16:9 HD or 4 K.

  The setting sequence is the basis for everything in your project - if it's wrong to start, all you will be affected later.

  Once you have a correct adjustment sequence you are satisfied, still images or video clips you want to use may not be the same dimensions/dimensions you chose for your sequence (such as 1080 p which is 1920 x 1080 pixels). You may have a still picture with larger dimensions, and then it will appear cropped as you currently see as its size does not match sequencing. Think of it as the photo was too big for a picture frame.

  As Jim mentioned, you can use the effect Adobe path across the source to fit, however it can be quicker and easier to simply with the right button of the image on the timeline, and then select define framework - this will automatically go to the media in your sequence.

  Thank you

  Jeff Pulera

  Safe Harbor computers

• Programs open to showing only top left of the screen and some programs are huge

  origin: headache Visual, even to post this question

  I have a dell dimension 3000
  Win XP SP3

  I have a problem with my video in general: everything happens in my screen showing that only the upper left corner of the screen when I open my browser and components such as the windows Task Manager appear HUGE! (looks like it tries to run in multi-monitor mode sort - but the system has never put up for that, my cursor handles also away from the screen to my right and taskbar are low down and unable to increase... any suggestions?) I tried to play with the resolution settings, but that does not solve the problem

  (Sorry if post Q is in bad shape, this is my first post and visit)

  -Clark

  Well the reason why I think why your taskbar are cut is very likely due to the monitor settings. On your monitor, you should see a series of buttons. Try to play with them and watch the screen for something like auto or something in that sense. If you do not then you will need to manually change the horizontal and vertical positioning. There are several other settings for the width and height, etc.

  And a question, is the video driver installed on the system?

• My screen shows only 3/4S of the screen. How can I maximize full screen?

  original title: full screen

  My screen opens to 0. What is necessary for me to open in full screen?

  Not exactly what you mean by "opens its doors to 3/4S.  Maybe your selected screen resolution ratio does not match your view report.   Try to change your resolution with the right proportions:

  "Windows XP: change the resolution of your monitor.
    <>http://www.Microsoft.com/windowsxp/using/Setup/personalize/resolution.mspx >

  HTH,
  JW

• Slide the bottom showing only on part of the screen at the time of publication

  I am using Captivate 7.0.1.237.  I have several slides I used a colored background on, nothing personal, just that captivate offers.  When I saw in the Captivate all right.  When I publish and run in a browser or on my LMS (Skilport), the background appears as follows with the background in the upper left corner.  He did this on several slides of horizons.  Also, I realized suddenly what she should look like.  Any ideas?

  

  Hello

  You use in the chrome browser?

  Version of chrome 36 has some issues with captivate out of html5. Please find the following workaround to resolve the problem.

  http://blogs.Adobe.com/Captivate/2014/07/update-on-Captivate-HTML-5-content-playback-issue - google-chrome - browser.html

  Let me know if your problem is solved.

  Kind regards

  Hari

• Guest operating system show only 2 CPU on DP67BG

  I have a problem my Guest OS Windows 7 x 64 sp1 show only a 2-processor motherboard intel DP67BG.

  This is my environment

  Motherboard: Intel DP67BG (Bios 1900)
  CPU: Intel Core i7 2600
  ESXi 4.1 Build 348481

  Guest OS: Windows 7 Ultimate SP1

  1 - esxi summary screen shows 8 logical processors

  

  2 - guest OS config is selected the screen 8 processors

  

  screen 3 - properties of OS guest

  

  and the guest operating system device manager

  

  screen 4 - CPU bios motherboard selector

  

  Is - this question hypervisor or motherboard problem?

  Thank you.

  Welcome to the community,

  Windows 7 supports only 2 CPU. If you need more 2 vCPUs in the comments you will need to present the vCPUs as multi core vCPUs. See http://kb.vmware.com/kb/1010184 for more details.

  André

• When I turn on my iPhone 6 screen shows only the background color, the icon usage and the reception icon.

  When I turn on my iPhone 6 screen shows only the background color, the icon usage and the reception icon.

  The iPhone's battery is fully charged?  Otherwise, load it, and then try again.

  If it is busy, go in recovery mode as explained here.  You may need to try to get into the mode of recovery once more to succeed.

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• Show only in the middle of the wide screen monitor webites

  I have a 25 inch wide HP - LCD HD monitor, since installation, Firefox AND Google Chrome only display the page in the center of the screen all scrunched up, there is nothing on both sides of the screen but the white color of the Web page I'm on (including this page), this only happens in Firefox and Google Chrome, Internet Explorer (which I can't stand) shown in the image on the screen in the same way it would on one normal monitor 19 inches

  I tried full screen and it does not fix the problem at all, it is remove the address bar and menu and the image is still in the middle of the screen just crumpled, the attached image shows what look like most all web pages (the image displayed is the page I am currently able to post my question as I just took a screenshot) , on the only page that seems normal is each page in Internet Explorer, the pages I visit in Firefox and Google Chrome, like eBay, Craigslist and any forum I'm going, looks like the attached image, once, this happens only in Firefox and Google Chrome, I just (yesterday) was installing a reformat full and fresh, Windows 7 Professional 64 bit and SP1 , it's the same problem that I had before the reformatting and the new facility, it's the 36.0.1 Firefox Version and he said its updated, I tried all settings, including zoom and text zoom, with he does nothing to broadcast the image on the screen as it is MUST

  Any help would be appreciated... Thank you... Jim

  Well for some reason, I just reinstalled the video drivers after reformat, I did a few days ago, the pages seem to be more normal looking, when I click on images that they are not distorted, so I have no idea as to why pilots have nothing before, but this time worked

  In any case, so far it seems to work as it should, and I have a more or less complete vision

• Satellite Pro A200 - shows only 3 GB instead of 4 GB of RAM

  Hello

  2 years ago I had a Satellite Pro A200 as a professional laptop and it works with XP SP2, later with SP3. With 2 GB, it shows 2 GB memory in Windows - and I know it's a Radeon 7500 with 256 MB memory graphics individual, and there is no shared memory.

  I upgraded to 4 GB, but Windows shows exactly 3 GB. BIOS shows 4 GB and ATI system monitor shows 4 GB. I know that 4 GB is not possible under XP 32-bit, only on Windows 2003 R2 32 bit or Vista - but on desktop systems, I've seen values between 3.3 and 3.7 GB.

  So, where's the memory? It looks like a bug - the chips of memory have two 2 GB I checked this. Because it's a company laptop I can not just switch to 64-bit XP :-(

  There's no option in the BIOS - first I thought that it is the graphics card, but mine has independent graphics with own memory so that the computer comes up with MB 2048 or 4096 after the upgrade.

  Shared memory would show about 1900 MB of RAM for the operating system as my private EEEpc.

  Hi shadowmaster_1,

  > I know that 4 GB is not possible under XP 32 bit
  Then why do you ask this question here if you already know? Moreover, it s not a limitation in XP, it s a material limitation on all 32-bit systems

  > only on Windows 2003 R2 32 bit or Vista
  And who says that Windows 2003 or Vista can use 4 GB? Okay, there's an update for Vista where 4 GB correct displayed in system properties, but that doesn't make no difference. Vista 32 bit peut t use all of 4GB, it s only cosmetic improvements! ;)

  > So where is memory?
  Memory is installed on your computer, but can t be used complelty with a 32 bit OS.

  At the end of the story: If you want to use 4 GB, you need to install a 64 bit OS. On all the 32 bit OS, you can use only upward to ~3.2GB RAM!

• 2 TB Canvio shows only 30GB after format NTFS

  I bought the new 2 TB Canvio external hard drive.
  After the attempt to reformat exFAT on NTFS system drive shows only 30 GB file size, no matter if it's Windows or Linux.

  How I can solve this problem, made the firmware has been corrupted?

  Jake2701

  Hello

  Reach:
  Control Panel-> system security & -> administrative tools-> computer-> disk management management

  Now you should see the connected USB external HDD, but also the other drive HARD internal (containing the different partitions).

  Choose the USB HARD drive. Usually the system will ask you to initialize the disk. Select the disk and GPT (guid partition table) this is recommended for disks larger than 2 TB.
  After that it will show that the disk space is not allocated. Now, you need to click right on that unallocated spade and select new simple volume to format.
  All that s

• Satellite A30 monitor shows no sign of life

  Hello
  my monitor shows no sign of life even if the rest of the computer (HD lights etc) lights up.

  Help.

  Hey Dudu (nice name as a beatle vw :-))

  I would recommend the external monitor to check if it s only a bad configuration monitor, screen dead or something wrong with the graphics card.
  If you see something on the screen then please check if you switch to the external display device. But if all the parameters are good, and you will be see on the screen of the laptop and the external display, so I guess there must be something wrong with the graphics card.

• My screen shows only 1/4 of the image. I can scroll to get up and down. How can I fix?

  My screen shows only 1/4 of the image.  I can scroll to get up and down.  How can I fix?

  Hello

  1. You did changes to the computer before the show?
  2. The problem occurs with a particular application or any application?
  3. If this happens with a particular application, then what is the name of the application?
  Method 1:
  Check if the Magnifier is enabled on your computer. Check out the link and follow the steps to change the size of the screen. Check whether the problem is resolved.
  
  Turn on and adjust the Magnifier
  http://Windows.Microsoft.com/en-us/Windows-XP/help/turn-on-Magnifier
  Method 2:
  This problem may also cause if a computer monitor or the screen resolution is changed. Check out the link and follow the steps to change the resolution. Check if the problem persists.
  To change the screen resolution, see the link:
  Change your screen resolution
  http://Windows.Microsoft.com/en-us/Windows-XP/help/change-screen-resolution
  To change the monitor resolution, see the link:
  Change the resolution of your monitor
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/change-monitor-resolution

• RAM for Vista problem shows only 1 GB despite 2GB material

  I have Windows Vista 32 bit installed in my system with 2 GB of RAM, and it worked perfectly. Yesterday my system performance show only 1 GB of RAM and the Ram usage is 60 to 90% of the capacity, I know that max support 4 GB 32-bit system, but how is it ' show only 1 GB? I checked the RAM blocks separately in each lazy and they both works perfectly, yet, it shows only 1 GB? What to do? It's like Vista only uses one of my blocks of Ram.

  Memory of rum diagnostic test:

  Memtest86 + - a Memory Diagnostic tool
  http://www.memtest.org/

  Swap the memory sticks and try to start from with one stick in the slot. Do this for both sticks of memory the. /

• 4 giga showing only 2.99 usable in win 7 64 bit

  X 60 1706 - wp6

  using win7 64-bit

  Once the upgrade to 2x2giga pc2-6400 cl6 bios shows 4 giga

  victory show 4 GB but only 2.99 GB usable

  resource monitor shows

  reserved 1034 MB equipment

  670 mb in use

  61 mb modified

  stanby 263 MB

  1840 MB of free space

  I was wondering, why is it not show the 4 GB of ram?

  Hi elad1!

  Check this thread for your answer.