Crash installation at the entrance of password WAP54G V2

Similar Questions

• PC crashed - installation on the new PC or HARD drive

  My PC with one of my installed CC Suite licenses seems to be dead. I am assessing whether I need a new PC or a new HARD drive is internal.

  I have an installation on a Mac (that I want to keep), but I was wondering if I can just download "installing PC" on the new PC or HARD drive and allow with my CC Identifiez_ you?

  Will I need to "deauthorise' previous installation?

  I can not access the software CC deauthorise it manually from the dead PC and wonder if I try to reinstall on a new machine, if the system will say just that I'm over my limit of license because I have not already deauthorised installation?

  Thank you very much

  Yes. You can activate the application Adobe CC on 2 machines.

  Please see licenses and terms of use | Adobe

• Agents, guests at the entrance of password on stdout?

  Met assessment Hyperic HQ here and I have a very interesting question.
  Affected systems are Solaris 10 zones, HQ Open Source of the configuration of the box with very little work.
  
  Here is what I get:
  
  Hyperic@Manticore$./HQ-agent.sh start
  Starting Agent
  -Call agent
  -From agent process
  Agent started successfully
  Hyperic@Manticore$ password:
  Password:
  Password:
  
  Repeat to infinity. This happens on all agents. I've set up SSH keys between the agents and the master and officers with the option NOPASSWD sudo privileges.
  
  User_Alias AGENTS = hyperic
  HYPERIC Cmnd_Alias = / export/home/hyperic/pdk/work/scripts *.
  ALL = NOPASSWD: HYPERIC
  
  Can someone tell me what is causing this problem and how can I solve it?
  Thank you!

  I apologize, you must completely remove the sendmail from your server inventory and let HQ reimport.  I changed the config accessories so that you must explicitly be told to use sudo or the right script fails silently.

  Currently, the sudo command is always on demand via the HQ server.  That's why you still see password: pop up.

  For what is the absolute path, check again after that sendmail is re-imported.  Then let me know in case of failure.  I don't think it's a problem.  And don't forget to configure your plugin to use sudo, otherwise you will not get a lot of parameters.

• Satellite 2410-703 requires the HARD drive password

  My computer crashed recently, giving initially the message 'Please insert the product CD-ROM recovery' followed shortly after by "HARD drive password:
  I do not have a HARD drive password, but the product recovery CD and data on my hard drive that I want to recovery again.

  Can anyone offer a solution to my problem? Thank you.

  I put t know why your laptop has crashed and why the HARD drive password is needed but the fact is that if you n t know the password for HARD drive then the HARD drive is blocked and is no longer accessible.
  In this case you will need a new...

• I had to reinstall all my programs and data to a new disk, the old crashed. During the installation of Flash Player, I can't go any further than the password stage as he rejects. Again the username and password have been accepted without any problem to ac

  I had to reinstall all my programs and data to a new disk, the old crashed. During the installation of Flash Player, I can't go any further than the password stage as he rejects. Again the username and password have been accepted without any problem to access Adobe.

  Strangely the same problem occurs when I try to install and older version of Lightroom 4.

  Can you help me?

  Hello

  It is the OS, not Flash drive, to ask for the password.  Please refer to the FAQ what userid & password I need to install Flash Player? for assistance.

  --

  Maria

• I finished the installation of Sharepoint 2010 and he is told to use the username and password you loged on the server with does not work. What should I do to access the sharepoint URL?

  I finished the installation of Sharepoint 2010 and went through the Setup Wizard. It is said to use the username and password you loged on the server with does not work. What should I do to access the sharepoint URL?

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/sharepoint2010general/threads

• Windows installs until the end of the installation, bar goes through 3/4 of the way down and crashes.

  * Original title: Windows 7 Professional instsll

  Bringing to husbands machine until windows 7 Professional 64-bit windows vista

  as custom instslled since then couldn't upgrade version of vista that he had

  winfows installs until the end of the installation, bar goes through 3/4 of the way down and crashes

  has tried the f8 combo command but to reboot the installation all over again and just sitting here watching the installation goes nowhere

  plan to leave overnight this time

  any suggestions?

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• WebLogic Admin password is disabled during the installation of the ebs

  Hi all

  I install R12.2.4 EBS on OEL 6.5 64-bit.

  I followed this tutorial

  Technical information Oracle: Oracle E - Business Suite Release 12.2 installation steps

  I have a problem, when I start the installtion with . / rapidwiz, I never choose the quick installation option,

  application user information page, the weblogic admin user field, the rest of the other fields are disabled and empty.

  
  

  

  I have check the following thread, is this really the solution?

  Gray password WebLogic to reinstall after 12.2

  What is the problem if I proceed without mentioning the weblogic password or the os user password?

  How to fix?

  Kind regards.

  good,

  I had a fix.

  I click Next, and I get an error

  RW-installation of the 20019:No shares have been found for this machine

  then I found the solution in the following link

  http://Sridhar-OracleDBA.blogspot.com/2013/11/RW-20019no-install-actions-have-been.html

  in fact, he must put the domain name and host name in the file/etc/hosts in the first line.

  Thank you.

• Cannot install LR 6 DVD on Macbook Air with OS 10.11.2.  Installation crashes and ejects the DVD at the end of 98%.  Long note that 'Adobe application manager quit unexpectely', restart.  DVD installed correctly on my IMAC.  That is what it is?

  Cannot install LR 6 DVD on Macbook Air with OS 10.11.2.  Installation crashes and ejects the DVD at the end of 98%.  Long note that 'Adobe application manager quit unexpectely', restart.  DVD installed correctly on my IMAC.  That is what it is?

  Copy the contents of the drive in a desktop folder and install from this directory.

• I recorded my new password to download Lightroom; the installation program then asked my password and rejected the password with that I just signed up. All of the suggestions.

  I recorded my new password to download Lightroom; the installation program then asked my password and rejected the password with that I just signed up. Any suggestions?

  Could you please try the computer administrator password here.

  Kind regards

  Hervé Khare

• My mac crashes during the installation of the cs6. I have to turn off the mac. Now, I can't reinstall or uninstall cs6. He said the Installer failed to initialize.

  My mac crashes during the installation of the cs6. I have to turn off the mac. Now, I can't reinstall or uninstall cs6. He said the Installer failed to initialize.

  If you have not yet installed any Adobe application, try step below and check.

  Step 1

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command and then press the 'return '. ( "Don't miss ~ symbol" )

  ~/Library

  It will open the folder of the user's library.

  (3) then navigate to Application Support > Adobe.

  Open the Adobe folder and rename the OOBE, OOBE old and AAMUpdater to old AAMUpdater.

  Step 2

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command and then press the 'return '.

  / Library

  It will open the folder System Library.

  (3) then navigate to Application Support > Adobe.

  Open the Adobe folder and rename the folder Caps Caps-old and young OOBE to centenarians, OOBE Adobe Application Manager of Adobe Application Manager.
  

  
  

  Step 3)

  Basket of Adobe Application Manager of Applications > utilities.

  Step 4) [same step again]
  

  Click on the link below and download Adobe Application Manager and install the same:

  http://download.Adobe.com/pub/Adobe/creativesuite/CC/Mac/ApplicationManager9.0_all.dmg

  Once installation is complete, niche is going disappear, and then open the Application folder and locate the icon to launch Adobe Application manager, double-click it and update.

  Once the update is complete.

  Restart the computer once and try to install CS 6.

• INS-06003: failure of connectivity SSH without password for installation with the following

  Dear all,
  
  I am in the process of installing Oracle 11 g on Redhat Linux 2 grid Infrastructure.
  I have installed ssh on both RAC nodes and when I run
  
  SSH - p7547 racnode1 "date; hostname ".
  SSH - p7547 racnode2 "date; hostname ".
  
  I get the date and the hostname without error on both nodes.
  
  But during the installation of the grid, I get this error message:
  
  INS-06003: failure of connectivity SSH without password for installation with the following nodes: [racnode1, racnode2]
  
  My thought is that it is because of the port has changed 22: 7547 but where them specify this port in the configuration of the CARS?
  
  I also get this information in the Setup log:
  
  WARNING: Could not establish a SSH connectivity with node racnode1. Reason: java.net.ConnectException: connection refused
  
  Kindly help on that.
  
  Kind regards
  Imran

  misterimran wrote:
  Dear all,

  I am in the process of installing Oracle 11 g on Redhat Linux 2 grid Infrastructure.
  I have installed ssh on both RAC nodes and when I run

  SSH - p7547 racnode1 "date; hostname ".
  SSH - p7547 racnode2 "date; hostname ".

  I get the date and the hostname without error on both nodes.

  But during the installation of the grid, I get this error message:

  INS-06003: failure of connectivity SSH without password for installation with the following nodes: [racnode1, racnode2]

  My thought is that it is because of the port has changed 22: 7547 but where them specify this port in the configuration of the CARS?

  I also get this information in the Setup log:

  WARNING: Could not establish a SSH connectivity with node racnode1. Reason: java.net.ConnectException: connection refused

  Kindly help on that.

  Kind regards
  Imran

  You can have the file/etc/ssh/ssh_config, where the default port is set at 22. Replace with 7547 and try ssh racnode1 "date; hostname". If it works, then it contains the definition, you may need to perform.

  Kind regards
  Julien

• Installation of the system to remotely crash.

  I tried to reformat several times but my installation acted as weird. Installation sequence evolves, the fonts have changed and there was a time the displayed installation was windows 98, when was actually what I was installing windows xp.

  During installation, I couldn't access several applications/features/functions. He said that I have the administrator privileges. I checked the group policy and discovered that the assigned owner is a series of numbers/characters, trustedinstaller, etc.. I tried to reassign it to my account but it kept coming back.

  Later, it appeared other profiles which I have not yet created and administrator privileges have been assigned to these profiles as well.

  When I restarted, I could access is more group policy, services, local politics, back, etc.

  I had problems of net security as well.

  This has been a recurring problem.

  Please note that when I was installing, cable internet was not connected.

  I tried the search and in some sites I visited, there was mention of piracy using the emf, so I tried the suggestion to surround the pc with a sheet.

  At first, I was able to reformat but after reformat, popped the question with administrative privileges. So I tried to reformat again. This time, reformatting would not follow, and after several trials he now automatically would go to a page indicating that it would proceed to the installation of the EMS. I did my research and discovered that the installation is done remotely EMS.

  Apparently, my PC is controlled remotely, but how and by which is subject to investigation, which I would ask you please your help on.

  I tried to surf and found instructions on how EMS can be disabled. I was able to turn it off and was able to proceed with the installation but still, the problem with the profile persisted property. I had no control over my own account.

  I tried to reformat again, but this time I had to surf the start-up problems, since I had starting problems and apparently my pc is executed before even my installation cd is on (CMOS kept on changing the settings).

  The EMS message appeared again and when I tried to turn it off, I could no longer use the orders or access their directory; they were already locked.
  I tried to use the Disk Manager, trying to fill the disk, of zeros, but even managers of disc, I used were acting strange. Either they would freeze or they showed different disk size or they would format so quickly.
  So I tried to check the disk through ms back and found a hidden volume x: sources. The volume label is BOOT. I tried to remove it, but I couldn't. I tried to format it, but it is what is shown:
  formatting 3 m
  Unable to format. This volume is write protected.
  Apparently, that's what is running even if I'm changing the values in the CMOS.
  I tried to research it, but there is only one site that appeared when I googled: "formatting of 3 m.
  Unable to format. This volume is write protected.
  It is the site of which appeared ONLY:
  http://roleplayerguild.com/F54/to-whom-it-may-concern-108634/index3.html
  Page not found
  When I clicked on the cached data, here's what I found:
  That's the Google cache of http://roleplayerguild.com/f54/to-whom-it-may-concern-108634/index3.html. This is a snapshot of the page as it appeared on August 26, 2011 15:44:10 GMT. The current page may have changed in the meantime. To learn more
  Text only version
  These search terms are highlighted: 3 m of formatting cannot format volume write protected
  Can I ask your help to resolve this issue please?

  Passionate, Salvation

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP forum.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• Out of the blow of sleep when the HARD drive password used on Portege R700

  Hello
  I just got a DLI R700 with Win 7 Pro 64-bit
  I have a very annoying problem because it must be plus 1 minute to accept the password after the resumption of the mode standby. It would be faster out of the hibernation!
  So he wakes up from his sleep in a second, then you can enter the password without any problem but you just can't click on the arrow or press on enter up to what more than one minute. Similarly, it will accept even fingerprints directly at the exit (you get the green check mark) after wake but then expects just over one minute to move in the opening session on the desktop screen.

  Through a process of account, I worked on what was going on...
  Only, it crashes when you have the password on resume from sleep. CV password sleep turn out and he throws back in Office windows in seconds of wake
  This does not happen to resume from hibernation or reboot - scan of fingerprints or password is entered, then goes right into the office in a few seconds
  I started uninstalling software fingerpint, vap, power, toshiba - nothing always security management the same. Then I realized the password HARD drive - which was defined using the security of Toshiba and deleted using the same, has been still enabled in the bios. I have this off and everything works fine. I reinstalled the vap, power management and fingerprint software and everything is always very well, so it was defnitely the HARD drive password.
  Now it's really fake I want to have a RESUME from sleep password and HDD password protection - I have to choose between one or the other, unless I want to wait more than a minute each time he wakes from sleep which is a real pain! So it's clearly a bug in HARD drive password settings, probably in the bios? I have the latest BIOS installed.
  Any ideas on how to get this sort?

  Does anyone else have this problem with be either 32-bit or 64-bit. Or everyone doesn't have this problem, that is to say that they hear HARD drive password AND he wakes with password ok in a few seconds?
  Thank you

  Post edited by: bullerd

  Hey Buddy,

  It's really hard to say something about what I can only say that I can t noticed this problem on my Windows installation.

  By the way: you are using the version Windows from Toshiba or your own installation of Windows?

  Theoretically, it could be a problem to install Windows or disc itself are you able to test another installation of HARD drive or windows that you can make sure it is not a software problem?

• installation of the driver Imation superdisk120 (LONG)

  Under XP, service pack 2 and not connected to the internet. The Imation SuperDisk is parallel port model not a USB device.  It plugs into the printer port connector.

  Eager to recover an old file off a Superdisk Imation 120 I tried to connect the drive to the old computer, where it was once installed.  Drive was not working so I uninstalled and installed again since the original Imation disk.

  The installation seems to work and the display the message says that it has been installed successfully.  But when I try to use the PC hangs.  The device is not correctly displayed on the Explorer window - it says "diskette of 3 1/2 (b)" if I do a forced shutdown, Windows XP is up with terrible disk addressing messages to not be consistent, files not where they are supposed to be, etc..  But if I start in safe mode and uninstall the Superdisk, Windows XP is happy once more and does not seem to suffer persistent problems.

  I tried to find a more appropriate (XP) or a more recent driver using my PC every day, but this product is obsolete for a long time.

  There is a ReadMe.TXT file which involves potential problems with the device and the IRQ addresses, but I'm not knowledgeable enough to make heads or tales of what he says.  In part because it is written for older versions of Windows 95 or NT.

  I suspect that it is indeed addressing conflict but have no idea how to go about fixing.  Here's what says the ReadMe.TXT file:

  *****************************************************************************************

  Overview of the Parallel Port
  -------------------------------------

  Parallel ports have traditionally been seen as "printer ports".
  As mobile and external devices are becoming very popular, new
  standards of port as Enhanced Parallel Port (EPP) in parallel and
  Extended features (ECP) port are breaking the barriers of performance
  and which allows operation at full bus speed.

  Machines IBM-compatible supports 3 parallel ports.
  Each parallel port has a unique i/o address.  The three commonly used
  O/r address are 0x3BCh, 0x378h, 0x278h with two available interrupts
  (IRQ 7 and IRQ 5). Systems not IBM as NEC 98XX have ports such as 0x140h.
  and IRQ 14. These addresses are also called by the "logical device name.
  some LPT1, LPT2, LPT3.

  Normally, the first port is configured for 0x3BCh/IRQ7, the second at 0x378h.
  IRQ7 and the third in 0x278h/IRQ5. However the ports can be assigned to one of
  These three addresses. It is possible to set up a parallel port to share
  IRQ, like most software does not IRQ use while using the port. However
  interrupt the driver software as an external hard disk, cdroms, etc., may require that
  IRQ for improved operation. Most of the systems on the market have their
  first parallel port (LPT1) assigned 378 h, IRQ 7 by default when shipped.

  The base address and the IRQ can be identified by the search:

  a. in the CMOS settings.

  b. with the help of MSD (Microsoft Diagnostics) in the BACK, the Device Manager under
  System of WIN95, WINNT Diagnostics in NT

  In some systems, the CMOS does not address basis nor the IRQ, but
  Specifies 1 parallel to 3BC/IRQ7, 2 parallel for 378/IRQ 7 and parallel 3
  for 278 /IRQ 5.

  In some LPT1/378 systems options assigned LPT IRQ 7 and assigns LPT2/278
  the turbine BP to IRQ 5.

  Troubleshooting tips
  -----------------------

  General:

  1. the questions of recognition of parallel Port
  The system has a parallel port EPP, but do not initialize in EPP.

  Solution:
  The pilot of the shuttle initialize EPP only for parallel port basics set
  to 378 h and 278 h. If the parallel port to which the device of the shuttle is
  connected is configured to 3BCh, the driver will initialize not in EPP.

  2. the driver fails to load or to identify the adapter. Pilot reports
  "Error during initialization adapter, driver failed to load".

  Solution:
  a. unplug the unit and set up the system.
  b. Add the option "/ a" to the driver.
  d. Save and reboot the system after the connection of the shuttle.
    
  If this does not work:
  Repeat steps a and b.
  c. Type "/ DI/R2 /W2"
  d. Save and reboot the system after the connection of the shuttle.

  If this does not work:
  Repeat steps a and b.
  c. Type "which / / W2/R2 OF."
  d. Save and reboot the system after the connection of the shuttle.

  Configuration of the clashes often lead to problems that system or to prevent crash
  the pilot of the shuttle from loading successfully. Make sure that other devices
  installed in the system are not configured to use the same base port and the IRQ
  values. A typical example is of sound cards that are popularly set to
  Use IRQ 7.

  BACK:

  1 Shuttle hard/removable disk drive and FDISK

  Solution:
  To partition the hard drive or removable drive with the
  The command FDISK, support INT 13 h must be activated.
     
  Add option/b to the driver in the CONFIG. SYS to enable INT 13 h support
  and re-start the system.

  Run FDISK displays now the shuttle HDD as well.

  Win 95:

  1 uninstall or prevent a shuttle loading MPD

  Procedure:
  To uninstall the shuttle MPD in Device Manager expand SCSI
  Adapters section, select the entry for the device of the shuttle,
  Click on delete. Confirm when the confirmation dialog box appears and
  Reboot the system to reflect the change.
  The entrance to the MPD shuttle now will no longer appear in Device Manager
  under SCSI cards.
  The MPD is NOT deleted it has installed the path.
  To prevent the MPD of shuttle loading, in Device Manager, expand
  the item of SCSI cards, and then at the entrance of the MPD shuttle.
  Click Properties and uncheck the box that reads Original
  [Current] configuration.
  Re-start the system, the MPD will not charge.
  (This can be checked by the Red 'X' that will appear
  alongside the MPD entry in Device Manager.)

  2 assignment/Reassigning the drive letter of the device of the shuttle

  Procedure:
  In Device Manager, select the device from the shuttle by clicking on it,
  Click the settings tab, change the drive letter appears.
  Reboot the system to reflect the change.

  3 shuttle MPDs running on machines not standard parallel port
  Addresses basic or IRQ.

  Solution:
  On machines like the NEC 9800 series, the MPD requires that be explicitly
  with the parallel port IRQ and port values.
  In Device Manager, expand the item of SCSI cards, click on the
  Shuttle MPD, click Properties, select the settings tab and type
  base port and the IRQ values as follows:
  PORT = 0xYYY IRQ = Z
  The prefix 0 x is required. YYY is the port of departure for example 140 and Z is the
  IRQ 12 value for example.

  4. the shuttle hard/removable disk drive and FDISK

  Solution:
  To partition the HARD drive of the shuttle with the command FDISK, INT 13 h
  support must be enabled.
  In Device Manager, select the device from the shuttle, click on properties,
  Check the box relating to Int 13 support and re-start the system.

  Run FDISK displays now the shuttle HDD as well.

  5. general controls and advice on improving overall performance

  a. make sure that the configuration of the CMOS setting for the parallel port
  and the setting in Device Manager is the same.
  (b) ensure that there is no Port Base and IRQ comes into conflict with others
  devices such as sound cards.
  c. If the compatible parallel port EPP, ensure that the parallel port
  in the system CMOS is set to EPP.
  d. to step to the top performance of the system, in the Control Panel,.
  Select system, select the performance tab, click file system.
  ensure that the Performance is set to Full.
  e. Select the Troubleshooting tab and make sure that writing it back
  Cache is enabled. These are usually the default settings.

  WINDOWS NT:

  1. in the start of Windows NT does not recognize cartridge not
  drive letter is assigned.

  Windows NT will not assign a drive letter unless a cartridge has a
  Signature of Windows NT.

  Solution:
  Run Disk Administrator to place a signature of windows NT on the cartridge.

  ********************************************************************************************

  Thanks for the reply, Bill.  Looked at this site a couple of days.  They seem to focus on current products.

  All is well now that I'm back to Windows 98SE on the old PC.  The Imation SuperDisk installed and works very well.  I got the files I needed.  The whole machine goes back in the closet now for 6 years!

  Thanks to everyone who took the time to look at my question.