Crash scanner HP caused by ActiveX controls

Similar Questions

• Scanner - one or more ActiveX controls can be displayed

  Software HP Precision Scan Pro for the ScanJet 4400C worked fine on my Windows XP Pro SP3 computer, but now it shows that when I open it to analyze:

  

  Then, when I press one of the buttons on the left side and blue window, all white on:

  

  I did no changes in the other settings that Windows updates. I believe that ActiveX in a permit that for years.

  (1) how to confirm that an ActiveX component that would keep from running not blocked or disabled?

  (2) how to find & activate the "blocked Editor", so it is perhaps the case?

  (Thanks in advance for any help)

  This can help:

  You should remove 1 additional area (parasite) of HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\ with number Pseudo-graphique, you will see before the number of zone 0.

  It seems that it is a bug in update of Adobe flash player, but I'm not sure.

  The number Pseudo-graphique they speak of before the zone number 0 looks like a miniature uppercase 'L '.

  Delete this registry entry and all is well.

  Taken in Forum Windows

• Windows Media Player ActiveX control causes memory leak

  I'm writing an application that will load and play *.avi files in an ActiveX control. The user must be able to load multiple files consecutively in the single player mode. However, it seems to be the memory leak every time that a file is loaded, even if it's the same file. For example, even when you load a small file in *.avi 81KO repeatedly, there is a memory leak ~ 6Mo coherent (as observed in the Manager of tasks). The leak memory is greater when I load larger files.

  I tried to deny it by adding using a Method Close by using the node invoke. It gets about 3 MB of RAM, but when I load the file again, it leaks ~ 9MB, leaving a net leak of ~ 6Mo once again.

  I also used reference close vi (s) to clear the memory ActiveX object, but that did not help either. In other versions of VI, I tried to eliminate the creation of a new IWMPlayer4 object using a shift register, but once again the leak memory persevered...

  It's a simple version of the VI, as well as the small video file attached. In my application, I want to be able to load large video files (~ 600 MB) several times without memory leaks. Thank you in advance for your help!

  -gpho

  Hi jareds.

  Thanks again for test it for me. I use Windows 7 and WMP version 12.

  As you requested, I tested it on a computer with Windows XP and WMP version 9 (and LabVIEW 8.2.1) and the problem of memory has disappeared. I then installed WMP version 11 on the same computer: still no memory problem.

  On the Windows 7 computer, I went back to version 11 using the instructions found on this link, and the problem of memory has disappeared. It seems that memory leak is due to a problem with WMP version 12 (although degraded version 11 on windows 7 has some bugs - and you can't go back to v12).

  Thanks again for the help!

  -gpho

• ActiveX controls disappear when VI is loaded in a subgroup of experts with the use of the modal to start dialog box

  Hello

  I have a secondary to a VI (VI1) in which one another VI (VI2) is charged. VI1 is used as a module for an Action step in TestStand. Vi2 has controls ActiveX as ExpressionEdit and Adobe PDF reader etc. VI1 VI2 in charge in a subgroup of experts and calls Dialog.vi Modal start. I put 'Show the front panel when it is called' true to VI1 so that the VI appears when the sequence is executed. During the execution of the sequence and when the VI begin dialog is called VI1, all controls ActiveX VI2 (loaded in the Sub-group of experts) modal disappears. Here is the screenshot of the façade of the VI1 operating sequence:

  

  This problem occurs in TestStand 4.2.1 TestStand 2010 and TestStand 2010 SP1 (for as far as I tested it.) May occur in older versions too). In the attached file, VI1 is 'ExprEdit Test.vi' and VI2 is 'SubpanelLoad.vi '. The sequence attached is developed in TestStand 2010 SP1.

  How can you solve this problem?

  Thank you

  Ganesh Kumar

  Hi all

  Found the solution to the question . The problem is that the front of the VI in which start Modal Dialog.vi is used should not be open before start Modal Dialog.vi is called. In the files that I have included in my previous post, .vi ExprEdit Test (does not work) had the ability to 'See the façade when it is called' enabled in the properties of VI. It was the origin of the problem. When I disabled this option, all started working well (ActiveX controls do not disappear during the execution of the sequence). I had accidentally turned off in .vi ExprEdit Test (work) that worked. A comprehensive review of the differences between the 2 screws led to find the cause of the problem.

  Thank you

  Ganesh Kumar

• ActiveX control error: your current security settings prohibit running ActiveX controls on this page.

  Original title: problem with Activex controls

  I m trying to open my scanner program, but windows shows me the below msg: Please help me solve this problem...

  one or more activex controls couold appears no not because either:

  (1) your current security settings prohibit running ActiveX controls on this page.

  (2) you have blocked an editor of one of the controls.

  As a result this page may not display correctly.

  Hi euriskofiles,

  The problem may occur if the security settings for the Local computer zone are configured to prevent the ActiveX content to run.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756

  Steps to follow:

  (a) click Start, click run, type regedit, and then click OK.

  (b) expand the following registry subkey:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\0

  (c) in the right pane, right-click right 1200and then click change.

  (d) in the value data box, type 1, or 0 to replace the existing value of 3. Then, click OK.

  Note If you type 1 in the value data box, you receive the following message when you start Microsoft Project:

  You want to allow software such as ActiveX controls and plug-ins to run?

  In addition, you receive this message at other times when you use Microsoft Project. If you do not receive this prompt, type 0 in the value data box.

  The values 0, 1 and 3 are associated with the following behavior:

  o 0 = on, or the action is possible

  o 1 = Prompt

  o 3 = disabled, or action is not allowed

  (e) exit the registry editor.

  See if that helps. Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• One or more ActiveX controls could not be displayed because that is: 1) your current security settings prohibit running ActiveX controls on this page, or 2) you blocked an editor of one of the controls

  Well this problem started a week ago. When computer first starts or restarts (I did not open any program still!) I get this message,

  One or more ActiveX controls could not be displayed because that is: 1) your current security settings prohibit running ActiveX controls on this page, or 2) you blocked an editor of one of the controls

  I know this usually occurs with internet explore, but as I said I do not have anything yet open. I've activated all the active X controls in internet explore with no luck. I searched the web for active x forums and blocked the editor and followed all the instructions in the error message (most of them see enabling active x) but without success. I am an advanced user (15 years and more), but it has left speechless me. If I try to open "Services", I get the same error. When I opened my anti virus, it opens but it is just a blank page. I know that my anti virus is working well.  Also if I open internet explorer, I get a blank page, if I go to a website (enter it or go to my favorites) it works fine. I've deleted all the temp, historical, cookies etc. etc. (use CC Cleaner and other programs to clean) but if reopened once again it says white. If I use help and you want to see a help topic that it is said (may not display due to problems of congestion or network, check connection) but internet works fine. I know that I have not a virus (a lot of people in the forums think it) I scanned with Bitdefender, Eset Nod32, Super Anti Spyware pro, Malaware Anti Malawarebytes, Spybot, Stopzilla, etc. etc. and did not find a virus (in safe mode) there are many people on the web with the same problem (with the same and some with different programs). This problem seems to be random (does not affect a certain program) I tried for a week now and I'm stumped! Anybody have ideas that I heard yet?

  Thank you if you do!

  Hi Morksr2d2,

  As you mentioned that the problem reappears as soon as you run the anti-virus program, it seems that we found the cause of these error messages at startup.  I would like to recommend that you Uninstall the antivirus & check if the problem reappears. This should also allow you to make changes on the services tab in system configuration utility.

  Later, reinstall the antivirus program.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Two main problems; can be combined (display/activeX controls to image)

  I first noticed the issue several weeks ago, but I can't determine any single event that triggered (for example no virus, no software installation, etc..) Since that time I was pulling on my hair, searching the Internet to find answers, answers MS Search, book search for answers - without success.  I am now trying to put this as a presentation at the forum, and I'll switch to FireFox immediately after, because no clear solution seems to be around.

  Please - someone help me; I have tried everything I have seen/read:

  Question 1: Some web pages display images without problem (www.microsoft.com, www.newegg.com, www.tigerdirect.com, etc.) while others fail to show images at all and seems more text based GUI based. A good test for this was that several web sites including www.amazon.com , which breaks down to show the book covers, Ted images etc., while other pieces show correctly positioned text and links work when you're floating above them and click.

  What I tried (1):

  -During the running MS Internet Explorer for FixIt. clear all the cache (password, internet files, temporary, cookies, forms, etc.); Reseting "default." running a registry cleaner application. After each setting on the net I could find and the similar value, removing all list management web sites. (This is true for both versions of Internet Explorer - 32B or 64B)

  Question No. 2: Installation of the safe places known ActiveX control (for example, Microsoft) do not settle. This applies to both versions of Internet Explorer (32B and 64B). To try to understand what is the problem, I even searched the Internet and followed everything I can find.

  -Linking MS FixIt for IE; clear all the cache (password, internet files, temporary, cookies, forms, etc.); reset to "factory" by default; Run the registry cleaner application. After each setting on the net as I could find and the value as well. remove all list management web sites.

  FAILURE on all fronts... :(

  Additional information:

  After switching to FireFox (if all goes well for only a short time), I followed the instructions to remove Internet Explorer my system.

  It did not work... IE (32B and 64B) remained. Not only he remained, he kept what is wrong with it as well. Still no satisfaction.

  If anyone can help, I would really appreciate it...

  Anyone know of any solution anywhere - little matter how painful?

  Please let me know answer here or by sending a private message or how ever best works for no matter what - I'm going to try anything at this point.

  Thank you in advance.

  FYI: I posted this same question to: http://social.technet.microsoft.com/Forums/en-US/ieitprocurrentver/thread/00d14d60-92e2-46b8-8ecb-5c0beb445f44

  However, this forum does not seem to be technical enough to still offer ideas... I don't know that's the hope!

  Hi Jim,.

  I see that you have some problems with the display of the images, and active x controls on Internet Explorer. I'll help you with this problem.

  I suspect that the use of registry cleaners could have caused some problems.

  Method 1.

  If possible, use the system restore to a date before the problem occurred.

  System Restore: http://windows.microsoft.com/en-us/windows7/products/features/system-restore

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Method 2.

  If the method above does not help, then run SFC/scannow. After control scan to see if the problem occurs.

  I suggest that you can exercise SFC scan and check if that helps. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• How to resize the activex control?

  I want to dynamically resize an ActiveX control in LV 7.0.  How can I do?

  I tried to manipulate the container manually, using the HWND parent, but although the ActiveX think than its resizing it na not really.  Looks like the window is to be rigged and then the image is cut off?

  Anyway, if there is a solution, I would greatly appreciate knowing.

  Thank you

  Adrian

  Don't know if this can help, but...

  Try right - click at the end of the container on the FP and select Create the property node >...

  If your ActiveX control is like mine which should give you the properties of the container.

  Ben

• VB6 activex control does not not in labview 8.5

  I am currently trying to get out of VB6 and Laview for some applications to test automated for secondary (rechargeable) batteries.

  We use Texas Instruments fuel gauges to my business and communication with them requires an EV2300 USB box.  I have the drivers installed for the box, and it works without problem in VB6.  I need to get Labview to talk to the box in the same way.

  I use 8.5 at the moment, and I thought that I had the good idea to use the BQ80xRW.dll file that is already installed on my machines to VB6 application.  The only problem is that I don't have the source code of the DLL, only the dll and ocx in my win32 directory files.  Here's what I did:

  (1) import the activeX control to palette (bq80xRW.dll)

  (2) place the bq80xRW on my VI activex control

  (3) place call nodes for the functions I want to test (GetFreeBoards--> OpenDevice--> ReadSMBWord)

  (4) to include nodes with appropriate controls (integers, strings, etc.)

  (5) run the VI

  I've included the VI I developed with this post.  Nword must, in my view, be on 16 while Cmd should be set to 1 c (to read the serial number of the part)

  When I run the program, while the USB module is connected, the GetFreeBoards node returns the following string:

  \\?\usb#vid_0451&pid_0035#5&1c93b2c6&0&2#{8eb0fa22-a67c-4a27-9913-df9ab307d886},

  If I run the program without the attached USB module, the string is empty.  Without spaces or characters at all.

  If the activeX control is something.  It's just not what I want it.  And since I don't have the source code of the dll, I don't know why.

  This big long string starting with \\?\usb is the name of the Board of Directors.  Get rid of the trailing comma and passing under the name of your Board of Directors in opendevice().

• Compilation warnings TestStand ActiveX controls in WPF 2012

  Hi all

  I use the TestStand (ApplicationMgr, SequenceMgr, ExcutionMgr) ActiveX controls in my project written in WPF 2012.

  After that I put the controls on the form, there are a few referrences automatically included in my project. But when I compile, I had the following warnings in the output window:

  CSC: warning CS1762: a reference has been made to the embedded PIA 'c:\Windows\assembly\GAC_MSIL\NationalInstruments.TestStand.Interop.UI\5.1.0.226__ad9244eb3b825cd8\NationalInstruments.TestStand.Interop.UI.dll' because of an indirect reference to that assembly established by the Assembly "c:\Program Files (x 86) \National Instruments\TestStand 2013\API\DotNet\Assemblies\CurrentVersion\NationalInstruments.TestStand.Interop.UI.AxControls.dll". You want to change the property "Include the Interop Types" or another Assembly.
  CSC: warning CS1762: a reference has been made to the embedded PIA 'c:\Windows\assembly\GAC_MSIL\NationalInstruments.TestStand.Interop.UI.Support\5.1.0.226__ad9244eb3b825cd8\NationalInstruments.TestStand.Interop.UI.Support.dll' because of an indirect reference to that assembly established by the Assembly "c:\Program Files (x 86) \National Instruments\TestStand 2013\API\DotNet\Assemblies\CurrentVersion\NationalInstruments.TestStand.Interop.UI.AxControls.dll". You want to change the property "Include the Interop Types" or another Assembly.
  CSC: warning CS1762: a reference has been made to the embedded PIA 'c:\Windows\assembly\GAC_MSIL\NationalInstruments.TestStand.Interop.API\5.1.0.226__ad9244eb3b825cd8\NationalInstruments.TestStand.Interop.API.dll' because of an indirect reference to that assembly established by the Assembly "c:\Program Files (x 86) \National Instruments\TestStand 2013\API\DotNet\Assemblies\CurrentVersion\NationalInstruments.TestStand.Interop.UI.AxControls.dll". You want to change the property "Include the Interop Types" or another Assembly.
  CSC: warning CS1762: a reference has been made to the embedded PIA 'c:\Windows\assembly\GAC\stdole\7.0.3300.0__b03f5f7f11d50a3a\stdole.dll' because of an indirect reference to that assembly established by the Assembly "c:\Program Files (x 86) \National Instruments\TestStand 2013\API\DotNet\Assemblies\CurrentVersion\NationalInstruments.TestStand.Interop.UI.AxControls.dll". You want to change the property "Include the Interop Types" or another Assembly.

  When I change the property "Include the Interop Types", I rather the errors. Can anyone give some advice? What does the warning message? How do I get rid of the warnings or do I just ignore them?

  Thank you very much!

  Kind regards

  According to the text in the warnings, it looks like you had always incorporate true on some of the meetings.

  Try changing all those in warnings to not stir, and then the warnings will probably disappear.

  -Doug

• LabVIEW Touch Panel Module | ActiveX controls | Windows CE

  Hello

  I am trying to determine if it is possible to use with the LabVIEW Touch Panel Module ActiveX controls.

  There is no ActiveX container on the pallet in the Touch Panel Module and I can't find any mention of ActiveX controls in the manual of touch panel.  So, I'm gathering that ActiveX is NOT supported on LabVIEW Touch Panel running on Windows Embedded CE.

  Can anyone confirm if the ActiveX controls are supported on the LabVIEW Touch Panel Module?

  Thank you

  Steve

  Hi, unfortunately they are not (see this link). For more information, see the Manualand the listof the supported features.

• How to read and write FileGlobals with TestStand ActiveX control in c#

  Hello everyone,

  I'm trying to read and write FileGlobals with TestStand ActiveX control in c#.

  I tried with:

  SequenceContext contextOfTraceMsg = e.thrd.GetSequenceContext (0, out frameId);

  var filepara = contextOfTraceMsg.FileGlobals.GetSubProperties ("ProjectParameter.NestIsTested", 0). GetValue (1); (NestIsTested is an array of Boolean)

  but without success.

  Can someone tell me how to do it right?

  Thank you in advance!

  Concerning

  0049 wrote:

  Hello Doug,

  Thanks for the reply.

  It works to read a Boolean value. How to read the table of Boolean?

  Kind regards

  For a table you can either do:

  (1) myarray [] bool = contextOfTraceMsg.FileGlobals.GetValVariant ("myarray", 0);

  Or

  (2) using GetNumElements() and GetValBooleanByOffset().

  -Doug

• Using ActiveX controls to the old user interface

  I tried to build a User Interface for TestStand 4.1.1 using LabView 8.6.1 (on Windows XP)

  However, ActiveX controls keep showing in the old non - 3d "block" style.

  

  This seems to be a problem when you build a new exe. If you use the included UI (Full Featured) in TestStand it appears correctly.

  

  I was able to replacte this problem on two other development systems (a new windows XP, LabVIEW 8.6.1 & TestStand 4.1.1 install).

  (1) take a copy of the full-functional UI of LabVIEW.

  (2) open the project file

  (3) rebuild the exe file

  It's only a problem when you use the exe file. When you run from the LabVIEW development system it looks good.

  Hi Simon,.

  For your UI to take on XP
  Theme controls, you will need to place a manifest file that specifies the activex control topics in the same
  directory as your executable file. TestStand comes with a manifest file for
  INTERFACE c# you can also use for the UI of LabVIEW. Just go to the \User Interfaces\Simple\CSharp and copy the file TestExec.exe.manifest in the directory of the LabVIEW User Interface executables.

  Note that the manifest file must have the same name as your executable file LabVIEW UI. For example, if you name your user interface, "MyCustomTSUI.exe", you will need to name the manifest file 'MyCustomTSUI.exe.manifest '.

  Please let me know if this solves your problem or if you have other questions. Thank you!

• Problem of event reminder of the registry with Linkam ActiveX controls

  Hello

  I have a problem in configuration reference VI to interface with Linkam ActiveX control with an event callback function to register. I created a VI strictly typed with re-entrant execution, with all the correct connectors, as shown in the picture below, but LabView complains of a broken wire. The only difference between the input and the output seems to be that the result stands as an asynchronous function, and the entrance wants (synchronous) normal function? I can't find any option to make my VI reference become synchronous. Does anyone have any suggestions as to what to try next? Thank you very much

  Davide

  

  Hello

  Make a right-click on the terminal 'Ref VI' choose 'create the callback VI '.

  Do not try to build it yourself, it never works. :-)

• Thorlabs Piezo controls - manually ActiveX control

  Hello

  I use T - Cube Piezos Thorlabs for Nanomax stage - TS, I control through LabVIEW. I managed to connect the piezo controls in the program and it works well, but I'm for the accomplishment of the piezo through a slider or an automated outside of the ActiveX control. But I ran in trouble, I can't control the piezos otherwise than through the activex container. Any ideas? Joined the .vi

  UPDATE: no response from Thorlabs but I realized my mistake, the while loop was iterations too quickly so when the cursor is moved to the entry has been reset every time it loop. Put a minor delay (~0.01 s) and it works beautifully.