Crash when export - I tried to export my sequence first and SOUL and it crashes - Pls help.

Similar Questions

• Beach of the exporting parameter (minvalue ~ maxvalue) messed up when exporting a sequence twice

  Hello

  I do an exporter plugin using SDK 5.5 organization.

  I noticed that the range of values of a parameter turned bad if I export a sequence twice.  For example, if I register "MyAwesomeParam" with the value 10 min and max value 20, the first export if I enter 0, it climbs to 10 because the value is less than the min value. But in the second export, if I enter 0, it remains 0.

  Please encounterer this problem? Is there a solution for this? Please tell me if you know something about it, given that the guide SDK and the sample offered very little help.

  Thank you

  It is because the SOUL puts in cache settings of previous jobs. I noticed this also. It does not exSDKGenerateDefaultParams(), only exSDKPostProcessParams(). Thus, you never had the code executed that put the min, max, etc.

  In exSDKPostProcessParams you must read each parameter and the difficulty in all areas - the only thing you can trust is .value, all others like. maxrange.value. minrange.value .hidden, .in, etc. are potentially corrupt to fix them and write them back (ChangeParam())

  for example: this is my code from cadence in exSDKPostProcessParams. I have set up the labels of the chain, but more important still, I read, difficulty and write the structure frameRateValues.

  // --------------------------
  "Frame rate (fps)" [TEXT]: [BOX]
  copyConvertStringLiteralIntoUTF16 (STR_FRAME_RATE, tempString);
  lRec-> exportParamSuite-> SetParamName (postProcessParamsRecP-> exporterPluginID,
  0,
  ADBEVideoFPS,
  tempString);
  Get the preset
  lRec-> exportParamSuite-> GetParamValue (postProcessParamsRecP-> exporterPluginID,
  0,
  ADBEVideoFPS,
  (& lRec-> frameRateValues);
  Update local storage
  lRec-> frameRate = lRec-> frameRateValues.value.timeValue;
  lRec-> frameFPS = (float) ticksPerSecond / (float) lRec-> frameRate.
  Difficulty fields broken ('intValue' confidence only)
  lRec-> frameRateValues.structVersion = 1;
  lRec-> frameRateValues.rangeMin.timeValue = 1;
  lRec-> timeSuite-> GetTicksPerSecond (& lRec-> frameRateValues.rangeMax.timeValue);
  lRec-> frameRateValues.disabled = kPrFalse;
  lRec-> frameRateValues.hidden = kPrFalse;
  lRec-> frameRateValues.optionalParamEnabled = kPrFalse;
  Rewrite in SOUL preset storage
  lRec-> exportParamSuite-> ChangeParam (postProcessParamsRecP-> exporterPluginID,
  0,
  ADBEVideoFPS,
  (& lRec-> frameRateValues);

  FRAMES PER SECOND VALUES DROP ZONE
  lRec-> exportParamSuite-> ClearConstrainedValues (postProcessParamsRecP-> exporterPluginID,
  0,
  ADBEVideoFPS);
  for (int i = 0; i)< sizeof(framerates)="" sizeof="" (prtime);="">
  {
  tempValue.timeValue = display rate [i];
  copyConvertStringLiteralIntoUTF16 ((wchar_t *) frameRateStrings [i], tempString);
  lRec-> exportParamSuite-> AddConstrainedValuePair (postProcessParamsRecP-> exporterPluginID,
  0,
  ADBEVideoFPS,
  & tempValue,
  tempString);
  }

• My Outbox is suspended (swirling circle) with a large attachment... It's been 4 days now and beneficiaries become the subject of the email, but no attachment every few hours. I tried airplane mode turn off etc. and not good. Help!

  My Outbox is suspended (swirling circle) with a large attachment... It's been 4 days now and beneficiaries become the subject of the email, but no attachment every few hours. I tried airplane mode turn off etc. and not good. It seems that I can not stop the email to send so that I can access and delete it. Help!

  delete the account and set it up again

• Color space removed when exporting with the "copyright and Contact Details Only"

  Hello

  When looking at why my JPGs looked more saturated in IE11 I finally discovered that besides all the metadata when you export, delete the tag of color space causing the major problems of color in IE11 and probably other browsers. I think it's a serious problem in the program and must be addressed. I use LR 5.6

  Sorry everyone. I just tested again and I put a good idea 2 and 2 together to come up with the wrong answer

• Flexible browser width does not work when exported to HTML format and transferred. Muse CC 2014

  Hello

  This used to work, and then he stopped. Not sure when it stopped working, so I can't cancel everything I could have messed with.

  In the preview in the browser page, the bottom of the page is flexible and works very well.

  But when I export HTML and upload, it does not work.

  Help, please.

  I saw the site in several browsers and no luck.

  The site is below.

  Why Coyle

  Thank you

  Gene

  Hello Gene,

  I checked the page code for the page that does not work. It seems that you have inserted your CSS custom page, screen shot - http://prntscr.com/45vndu, which is in conflict with the Muse generated CSS. Delete this and let me know how it goes.

  - Abhishek Maurya

• File InDesign CC freezes at 66% when exporting to IDML (Mac and PC)

  Hello

  I use InDesign CC (9.1) and trying to export an .indd to idml document. However, it freezes at 66% and never complete.

  FWIW, I deleted chunks of text to see how it done successfully export and have found a point in which it works - after the removal of a large amount of text until you hit in the middle of a Word.

  I read that there is a possible memory space problem, but I see the same exact behavior in the Mac and the PC of InDesign CC versions.

  Anyone know what I can do to fix this?

  ~ Salman

  

  Before you copy paste, simply use the command move the Pages in the Pages panel. Set up a new file of the same size and reanme the master page to something unused in the original file, as zzzz, then select all the pages in the Panel in the first file and move Pages... Choose FRONT page 1 in the new file so the tram swap you sides and remove the last page which should be the old blank page 1.

• How to limit navigation directly via the URL when the user tries to type the page number and access this page in ORACLE APEX 4.2

  Hi all

  I developed an application where I have 6 pages and 5 tabs and based on the user role I posted the tabs for the user to access these pages.

  But when the user, who doesn't have access to the particular page (say, page 2), but still the user can navigate to it directly by typing the page number in the URL.

  I want to avoid such scenarios.

  eg: http://Apex.Oracle.com/f?p=110:2 , when the user type this in the address bar, it navigates the user to this page even if this particular user does not have access to this page.

  How to prevent the user to navigate through the URL, if the user tries to navigate directly through URLS rather than tabs, I have to give the error message.

  Version: ORACLE APEX 4.2

  Thank you

  Good reading this recent post

  Re: Authentication at the Page level

  All links to a page and the page itself must be secure.

  You can also consider the protection of session state to prevent tampering of the URL.

• Admission to FV and Farmville - when loading a small Virgin window page reloads over and over again. Help please.

  Hello
  I play Farmville and there are a few months when I updgraded FF - whenever I connect to FV, a small window appears on the side and my FV guard reload times and whenever he reloads a new small window pop - up is displayed.

  Can someone help me please.
  Thank you.

  You can see the social features sidebar.

  You can disable social features by setting the pref social.enabled false on the topic: config page.

  • http://KB.mozillazine.org/about:config

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• What does a subscription to Lightroom when you cannot download Adobe Photoshop elements 13 images and Adobe will not help me solve the problem?

  I've been mixed around, assigned to a number file, transferred to another Department only to be told that I have to use the public forum, which turns can be no viable solution either. How can I get their money back?

  Updated the catalogue, able to see the images in Lightroom.

• Lightroom 6.2.1 stops when exporting video slide show

  Since the upgrade to 6.1 to 6.2.1 I can't export a slideshow as a video.  It starts the process, the progress bar indicates he may go 10 or 15%, then Lightroom stops and there is no file in my output folder.  I'm on Windows 10.  It worked fine before the upgrade to 6.2.1.  I tried to reset all my preferences and that did not help.  I tried a selection of slides, like maybe 20, much smaller and it still does not work.  I tried with no music or with music.   What can I do?  Is - this another known bug in 6.2.x?

  Aram

  Workaround, at least on one of my computers.  In my view, there is a lack of interest in my problem since nobody answered to my previous posts, but maybe I can help someone with my solution.

  I asked a few friends to photo if they had the problem and none did.  But I also noticed that all my computers using Intel's HD video system on the motherboard.  None of my friends have been.  I downloaded the latest drivers from Intel and which did not fix the problem.  On my desk, at least I had the option to add a dedicated video card.  So I bought a map of the Radeon chipset, installed and then tried.  I got a different error.

  He said "Defunct sequencer" when I tried to go to the slideshow module.  I found the fix for this:

  https://helpx.Adobe.com/Lightroom/KB/error--sequencer-defunct--when-switching-to-Slideshow - module.html

  so, if you have this problem, try to get the latest update for your video driver, or if you have the Intel HD video, buy a dedicated video card.  I hope Adobe will solve this problem with 6.4 and I will be able to use my laptop again to export video.  I supported it until 6.1.1 so it does not work.

  I just had a thought.  I will try this fix on the laptop to see if that does anything.  Can't hurt.

• 'Error compiling movie/Unknown Error' when exported.  Great list of ' things I've already tried ' s

  Alright, move to the bottom line here, I spent the last hours 3 juggling with clips and sequences of trying to get my VERY average project to encode and export.  I get the dreaded "error compiling Movie.  Unknown error message.  But there are a few details as to where it is tripping when exporting; more on that later.

  Technical details: iMac, 32 GB of ram, Nvidia 780 M 4 GB, SSD from all around.

  First of all, a list of "Things I've tried."  Which many were inspired by multiple threads, I've already read:

  -Make sure there is not still images exceeding the size of my project (1080 p) settings.  Initially, there was one, it has since then been swapped for a completely different image/picture.  Still unresolved.

  -Make sure there is no offset image drop-down conflicts happening between clips and my settings.

  -All images is 1080 p, so there is no scale happening (not with any of the effects either).

  -Switching to export "in/out sequence" export "entire sequence."

  -Created a new sequence, dropped the sequence published in project parameters matched, tried to export from there.  Same question.

  -A tried to make CBR instead of the variable.

  -Tried to use all the rendering engines (software only, CUDA, OpenCL, etc..)

  -At least a few other things too, but it's so darn late now for this reason, and so I'm so tired that I can't remembering everything.  I'll gladly take any suggestions and report back.

  
  

  Now, I mentioned we're listening at a specific point.  I often read that he goes somewhere around 70% through and is approximately the same in my case.  He arrives at a specific clip/couple of clips and blocks in almost the exact same task.  I messed with these clips too many times to count.  Initially it has been remapped both with keyframes, so I changed it to a constant speed without keyframes. nothing.  Had a directional blur on one of the clips, so I completely; and no change.  I think I tried other things with that particular section of the timeline, but as I said, I'm falling asleep here.

  
  

  Please. Help.  I'm very, very, very close to deserting a ship to FCPX total after so many bugs and crashes (it is not the only issue that hinder the project, as many of you know).  Currently, I am a user of dual-app, different applications for projects depending on how how "inside" I need to get, or if I work with different people on different systems.  But I need something that is RELIABLE.  This is supposed to be a professional software and probably priority #1 for professionals is reliability.  At least in FCP almost everything runs very smooth, and I did not yet have a "can't f * ing finish a project" problem with her.

  I'm sorry, please excuse my behavior; I'm frustrated.

  We have progress!

  So, I've discovered some interesting things (maybe not interesting for anyone who has had or has solved this problem before, but new to me).  It is a long summary of what happened, but I want to explain how I came to the conclusion I did:

  First of all, I took advice from Colin and created a new sequence with the troublesome section, removed all the audio clips.  I thought I could try so suggestion of Ann at the same time, so I deleted FilmConvert not only the effects but ALL the effects of the clip.  The settings include: Filmconvert, directional blur (which a clip has the sum of retouching), speed of adjustment (without keyframes), then an adjustment layer with a very small amount of sharpening applied to it.  I did not remove anything from the adjustment layer.  I then exported with only "Export video" checked.  It worked.

  So, I really wanted to try to pin-point, in hopes of helping someone else in the future.  It's when things are interesting.  So I went back and started around, keeping the audio off the coast and little by little the effects removed.  He went down to the directional blur, which I completely spaced the same mention, because I forgot a little on this subject in the middle of all this (sorry about, 100% my fault not to mention blur; some of you could see as the issue immediately, had I mentioned).  With everything, but directional blur applied, it has exported.  I even put the audio tracks to, re-checked Export Audio, and everything worked well.  So the blur effect seems to be the question... or so it seems.  Another interesting thing that's happened is that for one of the first attempts to export without audio, I left the blur effect but take off FilmConvert.  It worked as well.  Finally, my last attempt was to export everything, audio and video and all the effects, however, this time I noticed that on the second clip in the sequence I had accidentally put the blur directional above FilmConvert in the effects Panel (the other clips there like the last effect applied).  So I moved it back to the bottom of the chain of effects.  Of course, it worked.

  Finally, and above all, I tried full export with effects in their place.  SOUL crashed, twice.  Frustrating, but unfortunately enough widespread lately.  However, the project is export straight out of first, first try.  Feeling very relieved.

  I guess my question now is... Why?  Is - this common with all the effects in the first of blur?  To summarize what the section of the clips looked like, it's just a quick moment of time being accelerated x 5, with a slight blur to simulate an exaggerated movement too vague.  Yes, I do usually this kind of effects in After Effects, with more control and better results, but the project is a quick and informal editing, so I don't bother at first.  A big thank you to all who contributed to the discussion, if your suggestion has directly touched the issue or not, it's the community to commit that really matters.  I hope that son like this can get small bugs like these resolved or help someone in a similar situation to learn how works the effect controls panel.  Nevertheless, there is useful information on this topic, for sure.  Thanks again to all who have helped me learn along the way.

• InDesign crash when exporting PDF

  I'm trying to export a PDF of high quality for my editor. It is an Indesign book with 14 chapters. I exported it several times before for the preview. It always crashes on the same page; every time. I tried to change the illustrations on this page of AI to PDF. Same thing.

  More funny is that when I export the chapter separately, it works very well.  What else could be that originally is this book to stop smoking to be exported on the same page every time?

  If you are able to export into pieces (as in chapter only exports), but not all together, it is more likely is a problem of system resources. It sometimes works to close ID and reopen, then perform export as the first operation. You can also combine PDF files into one file using Acrobat.

• First Pro CC crashes when exporting h.264

  I have shot some footage in AVCHD using a panasonic hmc80, edited two sequences in the same project, a short about 8 minutes, which I exported to the fine H.264 format and a second in 36 minutes that crashes when exporting h.264, exporting to approximately 8 to 10 Mbit / s.  I have tried mpeg2 and exported correctly.  I updated from the first and windows and checked drivers such as Nvidia, all of this to date.  I use a matrox mxo2 as an e/s has no MAXIMUM.  Same Setup worked well with first cs6 for about six months without any problem. It is a windows system 8 I7 with 4 disks in raid zero for media and a separate player previews and export.  I also tried the FLV and it also crashed.

  The error message Windows "Adobe Premiere Pro CC has stopped working" collects more information about the problem.  I press cancel on the error of the box and first stop.  In fact the same thing happened once while I was sitting right on the timeline, take a break, he did the same thing and stopped, I was not made or export or do anything.  I have closed all the programs, including my anti virus software to make sure that wasn't the problem, but kept stopping.  I used to do some audio adjustments on a few clips I've done in the past with CS6 hearing...

  I tried to open the project in CS6 but received a message that the project is damaged and cannot be opened. However, the project opens and plays fine CC where I created it originally. I have inspected the timeline and made the small part of locations that it stops the function of percentage completed without problem.  He stopped at 20 percent, 55 percent and 60 to 70 percent several times.

  Finally found the problem.  Hope this helps other casual users like me.  Originally when I started editing I dissociated video audio to audio specific modifications. It's a game of the game session only and talking heads were not in on it.  Once I finished editing I've linked audio video back together.  After I inspected carefully the timeline by zooming in to check every edit I was out of sync on one of my edits and he had a red - 4 video and a + 4 more on audio right on the clips.  After having to separate the tracks again that the red numbers went away and of course had an export successful h.264 after at least a dozen crashes.     What is funny about this is I had an export successful with mpeg2 after continuous h.264 and flv hangs until this fix.

• Adobe first/Media Encoder CC Crash when exporting video for ~ 25 min (Mac)

  Specifications of the laptop:

  OS X Version of El Capitan 10.11.4

  2.5 GHz Intel Core i7 processor

  16 GB memory

  Iris Pro 1536 Intel graphics card

  Problem:

  Adobe Premiere and Media Encoder CC constantly crash when I try to export the sequence of a project which is roughly ~ 25 minutes in length, H.264.

  The effects are used throughout the project, but only the base dissolves and black-and-white/contrast effects. Images comes from several sources, but all of the same mp4 file and type frame rates. There are also several PNG files in the Assembly, including the one I used to "frame" the movie to make it look more like images from other sources. Yet once, nothing complicated, not even a long dissolve (dissolved all is literally 2/24 frames in length).

  Split the video into sections and exporting separately are no problem, even when comparing a relatively short section of 4 minutes for a much bigger and more focused on the effects of section 11 minutes. Needless to say, I really, really, really prefer does not export this video into sections. The intended destination is youtube, and I just want everything in an own mp4, not two 12-minute videos.

  After some digging, I found similar problems reported on these and others and was especially deplore the possibility that my power supply is not large enough to cope, but it's still very confused. My MacBook is not 'stop', and as far as I could see, the Iris Intel Pro should have been sufficient even without a graph 5100 graphics adapter Pro 5200 or; as in the past I've already exported MUCH larger files, ranging from 35 to 85 minutes.

  solved by downloading latest driver for Nvidia CUDA for Mac - really just a problem with the Mercury playback engine. Guess OpenCL was not simply cut to get the type of work I was doing.

  Here is a convenient link to the latest CUDA for Mac drivers for all who encounter similar problems with export in Adobe Premiere Pro Media Encoder CC or CC: drivers CUDA for MAC Archive | NVIDIA

• Adobe Premiere Pro cc 2015.2 crashes when exporting

  From one day to the other, Premiere Pro has crashed during editing, but worse: it crashes when exporting.

  Things usually never did not, all of a sudden fool you.

  I've updated my graphics driver, I cleaned my Cache of media, I did a complete reboot and still it crashes. It's a fairly simple change, not even a true documentary, but I can't seem to export

  What is the problem?

  Using Windows 10, i5, Radeon AMD R9 - 270 2GB16GB DDR3

  everything worked great until this week

  Try to create a new project, import the old one in.