Crashes in Windows vista home basic...

Similar Questions

• I have a serial number valid for windows Vista Home Basic, but my hard drive crashed and I have no way to re - install vista on my computer. I am looking for a download so I can do it.

  Basically, I installed windows 2000 on my machine and I can't find a download for windows vista home basic that doesn't have some kind of crack or keygen. I want a legal copy not a hack. I have the serial number supplied with my computer. where can I find this download or get a drive.

  Here are all LEGAL for Vista:

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• My taskbar in Windows Vista Home Basic stops working.

  I am running Windows Vista Home Basic with 2 GB RAM and 1.60 ghz. My taskbar, always crashes (stops working) when I set my volume or just even click on it. I get this little window saying to restart, close it or wait for the program to respond. I click on the restart and wait until it restarts, and then it happens again in no time. Whenever it freezes I also dropped the notification volume and networking. I need help because this is starting to frusterate me. Please if someone knows how to fix this problem, please share it with me. Thanks in advance.

  I have this question almost HOURLY. I want a fix.

  So far, this works:

  1. press CTRL + ALT + DELETE.
  2. click on Task Manager.
  3. click on the processes tab.
  4. click on the explorer.exe process.
  5. click on end process and then click on end process.
  6. click on the Applications tab.
  7. click on new task.
  8. type explore into the Open box and then click OK.

• HP PSC 2355 all-in-one: HP PSC 2355 will not recognize Windows Vista Home Basic

  I bought this product in 2005. I'm just out of the box yesterday. The printer works fine. The software CD was made before Windows Vista Home Basic Edition. He acknowledges only 98, Me, 2000 and XP. He calls a Unknown600 to Vista. Is there a driver or other update I can use? Thank you.

  Hi @Mc_Cool,

  Welcome to the HP Forums!

  I noticed that you are looking for a basic Windows Vista Home Edition driver for your HP PSC 2355. I'm happy to help you!

  You can download the driver directly using this link, HP full feature software and drivers.

  Hope this is what you are looking for and have a great day!

  "Please click the Thumbs up icon below to thank me for having responded."

• Windows Vista Home Basic - problem with the icons does not meet various Windows services after trying to download updates

  I use Windows Vista Home Basic on a Dell Inspiron 1501.  I have recently accepted that some guest downloads Windows with terrible results.  First downloads do not appear to have been accepted and the system of guard stop and startup trying to cancel.  Second as I result, I seem to have lost access to a range of Windows tools.  For example in Panel I can't open system icons or Windows Update.  Nor can I access these services from any other avenue on the computer.  Whenever I have find an icon or a file screen flashes a dialog briefly and then disappears.  The effect of this is that I'm completely unable to access or to implement the recommended tools or services that could solve this problem.  My ability to manage my computer has been reduced to zero.  Dell were not receptive and I can't get a response from Microsoft

  worm post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  One thing you can try try the system restore, safe mode.

  Start the computer in safe mode with networking capabilities (hold DOWN F8 while the computer starts).

  To start your computer in safe mode, you can check the link below:http://windowshelp.microsoft.com/Windows/en-US/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx>

• where can I get the service pack 1 for windows Vista Home Basic. My media windows palyer will not play DVD with it. I can not get a decoder installed without the service pack. Please help__

  Where can I obtain service pack 1 for windows Vista Home Basic

  Where can I obtain service pack 1 for windows Vista Home Basic

  Hey electric7422

  Click Start then right click on computer

  then left click on properties

  It will tell you if you have a 32-bit version or 64-bit vista

  links below have downloads the standalone vista service Pack 1 for each bit version

  the 32-bit version

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en

  the 64-bit version

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=874a414b-32b2-41CC-bd8b-d71eda5ec07c&displaylang=en

  Walter, the time zone traveller

• In Windows Vista Home Basic automatic updates, anti virus updates and scans, etc. are not made during the night while the computer is in sleep.

  Using Microsoft® Windows Vista Home Basic Version 6.0.6001 Service Pack 1 Build 6001, I have my computer set up to install updates automatic update and scan with my AVG antivirus 8.5 from one day to the next, while the computer is in sleep. In the morning, when I wake up the computer it alerts me that there are updates available, and I have to click the balloon to install the updates. Meanwhile my anti virus is update solange wake up also. Both are supposed to occur automatically during the night. Shouldn't these scheduled etc. updates works even if the computer is asleep?

  Hi daglo1963,

  Thanks for posting on the Forum of responses of Vista.

  When Vista is in "standby", like updating the activity is suspended.

  I hope this helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Where to download a bootable Windows Vista (Home Basic) .iso image or a request for a new bootable DVD of Win Vista Home Basic?

  Where to download a bootable Windows Vista (Home Basic) .iso image or a request for a new bootable DVD of Win Vista Home Basic?

  Where to download a bootable Windows Vista (Home Basic) .iso image:

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.aspx

  ... request a new bootable Win Vista Home Basic DVD:

  For more information on replacement software support:

  http://support.Microsoft.com/kb/326246

  Tom Ferguson

  PS

  For clarity - from the top of the page link to iso files:

  Files Windows Vista Setup official (Digital River)

  Note these .iso files can be used with a Dell/no - product Dell OEM keys but the phone activation is required (see the note at the end). This key is usually located on the COA attached to the base of the system.

  Sale to the retail/upgrade product keys that can be used with these .iso files and activated by internet or by phone. See the note at the end for the activation of the phone.

• Upgrade to Windows Vista Home Basic (32 bit), Windows 7, 8.1, or 10

  Hello

  Greetings of the day...

  I published the query with small correction below. (Sony Vaio) & (32 bits) is given correction.

  I'm in the research for the information on how to change Window Vista Home Basic in my laptop Sony Vaio (32 bit) to Windows 7, 8.1, or 10.

  Please provide the guidelines.

  Thank you for this help.

  Kind regards

  RajuDS

  Hello

  My personal opinion is that you buy a more recent machine as Vista Basic came on machines that have the material basis for it requirements.

  Depends on hardware configuration required on later operating systems, and also find out if the manufacturer of the laptop computer is supported and provides drivers for operating systems later as to whether it is possible or feasible to upgrade or not.

  There is no free upgrade Vista to 7, 8.1, or 10.

  Follow these steps before you buy Windows 7.

  Microsoft sells more than 7; Try Amazon.com.

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@

  Follow these steps before buy you and upgrade (new installation) of Windows 8.1.

  Microsoft sells more than 8/8.1.

  Try Amazon.com, etc.

  Check if the manufacturer of your computer/laptop has Windows 8.1 drivers available for your model.

  If this is not available, Windows 8.1 not install and work properly for you.

  There is a lot of information in this first link from Microsoft:

  Download and run the Windows Upgrade Assistant 8.1 of to see if your machine is compatible Windows 8.1 and read the update for Windows 8.1: FAQ here

  "Update to Windows 8.1: FAQ".

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  "8.1 for Windows system requirements.

  http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

  @@@@@@@@@@@@@@@@@@@@@@@

  How to buy Windows 10:

  http://www.microsoftstore.com/store/msusa/en_US/cat/Windows/CategoryID.70036700

  But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.

  https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs

  " System requirements Windows 10"

  https://www.Thurrott.com/Windows/Windows-10/3884/Windows-10-system-requirements

  Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015

  "FAQ Windows 10.

  http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

  See you soon.

• Faxing with Windows Vista Home Basic

  From: GeorgeBakerIII

  How do I fax from Windows Vista Home Basic?

  From: Andrew Rinaldi

  Hi George,.

  Your only option is to upgrade to Windows Vista Ultimate or Windows Vista Business or purchase a third-party fax software solution.

  Kind regards

  ANDREW RINALDI

  Mainpine developer support

  + 1 503 822 9944 USA | UK + 44 8458 909438

  E-mail address is removed from the privacy * | www.mainpine.com

  Another response of the community of Windows Vista discussion groups

• 0X8004FF11 error code when I try to update Windows vista Home basic

  Windows does not start in normal mode, I need help.

  Hello

  -What changes have been made to your computer before the show?
  -Average only "Windows does not start in normal mode" your computer is in safe mode and not able to boot into normal mode?
  -What exactly are you trying to update in Windows Vista Home Basic?
  -Is this problem (error code) associated with any software (Microsoft Security Essentials)?

  Please provide us with more information on the issue:

  http://support.Microsoft.com/kb/555375

  If the problem is related to the Windows updates, see this article to fix the problem.

  Problems with installing updates

• Windows Vista Home Basic activation Code is partially dissipated.

  I decided to change my operating system to windows Vista Home Basic. The problem is 2 letters on the license window have worn the label on the side of the computer. Is it possible to know what are the missing letters?

  Hello

  I suggest using a flashlight and magnifying glass and try and read the numbers.

  Others suggest to take a photo and enlarge the photo to read the doors numbers.

  _______________________________________________________

  Or try these methods.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  ______________________________________________________

  Install another operating system could destroy this option:

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Them or us ask the right sequence of key.

  The methods above resettlement generally do not require allows you to provide a product key during Installation, the recovery process uses the Installation product key factory to activate automatically during the resettlement process.

  See you soon.

• Windows Vista Home Basic Edition does not detect networks wireless scope.

  running Windows Vista Home Basic on my counter top and it will not locate wireless... period. I know at least 3 in the box and he is always telling me that there are no wireless networks detected.

  On a side note, I installed my router wireless on my laptop (so I know it works!) and have successfully installed on my desktop as well (or if the installation wizard tells me) the top round works on vista premium and office is vista home basic, but for some reason, the office is always telling me there are no available wireless networks. I went through the installation wizard for my router wireless twice now and still that it prove when I go to "connect to a network.

  As much as I know there is no 'Wireless' or switch to be turned on anyway... There may be a command prompt to enable the wireless function?

  Hello

  Have you been able to use the network without any problem on your desktop computer wireless earlier?

  The following articles might help you solve this problem.
  Solve problems, find wireless networks
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• I can not connect on windows vista home basic desktop pc because of the former owner

  I can't log on to Windows vista home basic desktop pc because of the password previous owners is unknown

  Hello

  Try the following.

  Using another PC, download the app from the following link and save it in your downloads folder.

  PC login now

  Once the download is complete, open your download folder and double-click on the installer - this will result in another file, which is the disk image (.) ISO) you need to burn to a blank CD.

  Now, you will need to use an app like ImgBurn to burn the ISO correctly on a blank CD - a guide on the use of ImgBurn to write that an ISO on a disc is here.

  When the disk has been created, shut down the PC you can not log on, press the ESC key as soon as you press the power button to access the Start Menu, insert the CD, select Boot Options (usually f9), use the arrow keys to select the CD/DVD drive and press enter - peut also have you to "Press any key" to boot from the CD if asked to.

  Follow the instructions on the guide here to remove the current password.

  Kind regards

  DP - K

• MY computer is running Windows Vista Home basic I forgot MY administrator password when I try to reset the drive to reset Reset Wizard gives the message an error occurred trying to reset

  I running windows vista home basic I'm trying to reset my password using my reset disk and the wizard keeps returning the error message

  Hello

  You need to have a password reset disk until you fogot your password, not after that you forgot your password.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-password-reset-disk

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.