Crazy computer - starts by itself at night after I stopped it

Similar Questions

• My computor starts by itself. How can I stop this from happening

  I usually start my computor in the morning and turn it off at about 21:30. During the night, it starts by itself. How can I stop this from happening

  Hello

  Check your BIOS settings, looks like you have a setting for it to wake up at a specific time.

  It usually takes to press one of the FUNCTION keys to enter the BIOS screen

  I think F2 or F4.

  If you do not know how to change the BIOS settings are asking in a computer store is they don't
  for you change it or show on another computer how to do this.

  You may know someone who knows a lot about computers so they can watch it for you?

• Computer starts only in Mode safe after automatic updates.

  Over the weekend, that some automatic updates ran on my XP computer and now my computer won't start mode without failure.  I've done several restorations, and it still does not start correctly.  Any suggestions?  I use AVG Free antivirus.

  Don't know if that makes a difference, but I looked back and in 2003, we bought the computer...

  It makes a big difference ! At the #1 stage, you want to download a different removal tool using this link instead-online ftp://ftp.symantec.com/misc/consumer/Rnav2003.exe

  All the other steps remain the same.

  You may be able to connect after restarting in Safe Mode with networking by my previous answer - but be VERY CAREFUL and connect just long enough to do what you need to do.

  If my fix works, you should be able to connect to normal (Windows) to the time where you get to step 4. If not, well..., we'll cross that bridge if and when we come to it.

• After installing ElCapitan 10.11.4 on my G5, if I stopped for the night for some reason, the computer starts again sometime between 03:00 and 07:00. Any thoughts?

  After installing ElCapitan 10.11.4 on my G5, if I stopped for the night for some reason, the computer starts again sometime between 03:00 and 07:00. Any thoughts?

  Sounds like an Energy Saver preference, but what computer do you use?  A G5 (PowerPC) machine will not work on El Capitan.

• Mosue does not work after the computer starts

  OP: THE MOUSE CLICKING ON ITSELF AND THEN NOT WORK AT ALL AFTER MY COMPUTER STARTS. WHAT IS THE PROBLEM WITH MY COMPUTER?

  When I start my computer my mouse works fine for a minute or two, and then it starts clicking by himself out of control. I see the icon at the bottom of my computer screen touchpad flashes when it clicks and then after that it snaps really crazy for a few minutes, he clicks on the bottom and it wont let me click all. Its the equivalent of one person pushing the left clicker where I can't do something... someone help me please! BTW, I have a dell vostro, which is only a little more than a year that has windows vista if that helps at all.

  Hi fireflyz19,

  Thank you for your message.

  I suggest you go to the manufacturer's Web site to download the drivers.

  Here is an article that gives more detail how, see the section "manually update drivers":

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After installing something from windows update my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turn off.

  Hello

  After installing something from windows update (about 300 MB in size) my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turns off.
  Then a window pops up saying "Startup Repair cannot repair this computer automatically.
  The details of the problem say;
  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
  Signature of the 04:65537 problem
  Signature of the problem 05: unknown
  Signature of the 06 problem: BadDisk
  Signature of the 09 problem: unknown
  Signature of the 10:1168 problem

  System Restore does nothing, and all the other tools of recovery. :(

  Please help, it will be much apreciated :)
  DOM

  If you are sure that the problems began immediately after installing a Windows Update, use the free support of MS here:
  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.  MS - MVP - Elephant Boy computers - don't panic!

• Computer starts in the middle of the night

  After running four different games, I minimize all and put the computer to sleep or Hibernate. Sometimes in the middle of the night the computer starts and displays a screen of Google. The problem is, he loses all the games. It is said that they are not protected and I have for them all over again.
  My question is, how to protect them from losing. And why the computer starts in sleep or Hibernate?

  Hi HD RIDER 1,

  Welcome to Microsoft Answers Forum.

  Since when are you facing this problem?

  What are the recent changes?

  Do save you the game before you put the computer to sleep or into hibernation Mode?

  Are you using a mouse and keyboard wireless?

  Have you encountered this problem before?

  If you had not encountered this problem before you can go ahead and perform a restore of the system on your computer.
  

  Try to restore the operating system to an earlier point in time when it worked great for the steps below:

   

  Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

   

  In the System Restore dialog box, click on choose another restore point and then click Next.

   

  In the list of restore points, click a restore point created before you started having the problem, and then click Next.
   

  Click Finish.

  You can see the link below for more information:

  http://support.Microsoft.com/kb/936212

  I hope that this will really help you, good luck.

  Kind regards
  Manasa P-Microsoft Support

• My computer guard restarting itself over and over after windows xp screens.

  My computer guard restarting itself over and over after windows xp screens. He did the same when I try to put it in safe mode. Is it that I can do to get at least pass this screen?

  Kheta salvation,

  1. Did you the latest changes on the computer?
  2. You receive an error message?
  3. When was the last time it was working fine?

  Start the computer by using the option disable automatic system error reboot and check if you receive the error message, and post back with the details.

  1. Restart the computer.
  2. As the computer restarts, press the F8 key repeatedly until you see the Windows Advanced Options screen.
  3. Use the arrow keys to select disable automatic system error reboot and press ENTER.

  If you do not receive the windows logon screen, then refer to the article below and try the steps mentioned.

  Windows XP logon screen does not appear and the computer continuously restarts

  http://support.Microsoft.com/kb/310396

• The internet connection is lost when the computer puts itself to sleep after that idlen too long time needs to restart to re-establish the connection.

  I lose the internet connection

  Window vista Home premium intel core 2 quad CPU q6600 @ 2.40 ghz, 3.00 GB ram the System 32-bit

  The internet connection is lost when the computer puts itself to sleep after that idlen too long time needs to restart to re-establish the connection

  Hello

  Control Panel - device - network - manager double-click the used network - power management device
  Tab - uncheck the computer to allow him to turn off the device.

  Control Panel - Power Options - check at each change of diet Plan - change Plan settings - advanced
  Power settings - check the settings there.

  You may reset the default power Plans and and then change them as needed.

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• After that the most recent windows update, my computer starts a little more slowly and the start bar at the bottom rises gray and rasterized.

  After that the most recent windows update, my computer starts a little more slowly and the start bar at the bottom rises gray and rasterized. In addition, all pages that I opened on the internet are coming with the same blocks of old, gray. Any ideas on what was past, and how to fix it?

  Original title: old start bar

  Right-click on your desktop, go to customize and then make sure that any theme in the 'Aero' section is currently selected.

• Satellite P300 itself keeps restarting after the initial splash screen.

  My Satellite P300 itself keeps restarting after the initial splash screen.

  Start-up of the first screen with the F2 and F12 options down is displayed, the screen goes black, then a cursor appears in the upper left corner and flashes once or twice. Then the laptop stops and restarts and goes through the same process again and again.

  That's all with the power adapter is plugged in. If disconnected, he goes through the above process and close with no reboot.

  Any help or advice would be much appreciated.

  Post edited by: aic-poppy

  Start your laptop and enter the settings of the BIOS (F2). Set to its default value. Restart your computer, and press F8 to access the advanced boot menu.
  To start the laptop in safe mode and let us know if it works, try it please.

• Restored my HP Pavilion to factory settings and now when I turn on the computer starts a recovery to start, then he can't find something wrong and want to do a system restore

  I have a HP Pavilion with Windows Vista.  Friday night, I restored the computer to the factory settings.  After doing what he started back to the top as usual and was very good.  I shut down my computer Friday night and then Saturday morning, when I turned on the computer screen to start Recovery came and when throught he process of trying to find errors and found nothing and then gave me a message at each stop or do a system restore.   Does anyone know why it would start this resumption of start after that I just restored it?   I'm ideas... Please help.

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=au

  You restored your computer for some reason any.

  And now you have problems after using the HP recovery process.
  It seems to me that you might have another problem inyour computer.

  Problem with HP Recovery Process(during or after), contact HP.

  It's Recovery process HP, not Microsoft.

  See you soon. Mick Murphy - Microsoft partner

• the computer starts automatically to perform a scheduled task

  . Using MS and Office 10, at night after I've apres que j' ai ferme closed computer off tension and a scan or upgrade is expected early the morning before I restart, because restarting the computer automatically during the scan or update.  Thank you and Semper Ben

  Hi Ben,

  1. what program you use to scan the computer?

  If you use Microsoft Security Essentials, to launch the scheduled scan, the computer must be turned on and not in sleep or hibernation mode. The computer might be in idle state (no programs are running) to run a scheduled scan. If the computer is turned off or in hibernation when the scan of the annex, at the next restart, that the scan will not start automatically because the scheduled scan time is up and launch scan only the next scheduled time.

  For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• FF opens without me it starts when the computer starts with unwanted Bing or tabs tab

  When I start my computer, sometimes FF starts by itself and there are tabs Bing 1 or no longer desired. It seems to occur only when the date has been changed, never for a second time on the same date. Please answer in simple and plain English.
  Thank you
  Bernadine

  
  

• The Apple Mobile Device Service service on Local computer started and then stopped.

  My iDevice doesn't connect to iTunes, I think its a result of the apple mobile device service. The restart option doesn't come up, it just says  "start the service" and when I click that an error comes up which says "The Apple Mobile Device Service service on Local Computer started and then stopped. Some services stop automatically if not in use by other services or programs". (I've already got a post with this information on I just wanted to make it more clear)

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
     
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.3.3.17 to 12.3.2.35, for example, then you will also need restore the database in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2