CRC errors & IO devices errors

Similar Questions

• CRC error on large compressed files (.zip, .rar, .cab, etc...) The installation fails too...

  Hello world

  I have a new Dell computer. It's a Dell Studio 540 with Windows Vista Home Premium 64 bit, with 1 TG of hard drive and 8 GB of RAM. I have problems with "decompression" of a large number of large compressed files (more than 50 GB). Also, because the files on a DVD are often compressed (in the cab for the majority file), the same error occurred on an installation package. Thus, to resume, I got CRC error on compressed files, while opening the zipper AND my different types of software installation fails with errors of Sami.

  Before you answer, please read my steps below:

  1. I reinstalled Windows Vista 2 times from scratch with a clean format. Whenever I get the same error on the same files even when there is nothing installed (even the drivers are not installed).
  2. I tried to run Windows XP Mini, a very light version of XP is the launch of a CD at startup and run in RAM. The same problem.
  3. I did all kinds of tests of the material myself AND with Dell technical support. Nothing was found, and I'm sure it's 99.9% true. Everything has been tested: RAM, hard drive, processor, motherboard, etc. The Dell technical support told me that my computer is 100% functional and that this error is due to some software (Windows) does not very well with 64-bit processor... Everything works well in my work all day EXCEPT for the decompression of data.
  4. my files are not damaged: they unzip perfectly on other computers. In addition, the program that do not install because of the CRC error with compressed file are all used before on another computer OR are new. I even changed DVD to the store to get a new one and the problem is still there. I also tried to download the torrent from the .iso file and the same problem happened.
  5. the files on my computer are not corrupted by the hard drive. I copy keys usb, directrly on the DVD to the hard drive. All possible tests have been done on the files, and they are ok.
  6. I did all kinds of tests such as checkdisk, spyware, etc... but given that the installation has not helped with it, I don't think it's related.

  My last hope is here... MVP is maybe know a problem in which Windows with zip files. I read a lot of people of the CRC errors, so I'm sure something happens. I am currently with the Dell customer service to get a full refund to buy a new computer without a 64-bit processor because it looks too new for Microsoft.

  So if anyone knows something I could try, tweak, change to help me with my problem please let me know.

  Thank you very much!

  DarkJaff

  Hello!

  This morning, I realized that I never returned to close this topic. In fact, I work with dell for a number of weeks, talk to like 10 or 15 support technical Member, try something else and you know what works?

  Reinstall windows... But in my case, I have reinstalled windows 2 times before they ask me to do it again. So I did and everything worked perfectly... For the third time is lucky: P in fact, perhaps during the first installation of 2, RAM has not been installed properly or has failed for a second, because every file that has been read has become corrupted, but at the same time, everything is normal on my computer seems to work ok... In addition, it could be the update that I did for my BIOS. So, a good test would be to update your BIOS, shut down your computer, check if the ram is installed ok, restart, verify that your ram is detected.

  After that, reinstall your windows, but DO NOT use the file you had on your "not working version of windows. I lost a lot of backup of the thing on my computer because even put on my new fresh install of windows, these rar did not work. I needed to pick up an old DVD and they worked

  So, I hope this will help!

  DarkJaff

• Sims 3 gets CRC error during installation

  Hello, I would like to know how to get sims 3 to work on my laptop. I downloaded it but it happens with a crc error during installation. I have read that this can be caused when your computer needs to defragment if...

  To try to solve this problem, I downloaded a cleaning and defragmentation program. I cleaned my computer and tried to Defrag. I then discovered that I could not defragment if I had vista sp2. I downloaded sp2 eventually with the help of an advisor. There were a few flaws that prevented me to download it myself. Now I have sp2, that he will not yet be defragmentation without gel. So I can not even download the sims 3! Its very frustrating and I was wondering if you could help me to sort this please?

  Hi, I have the same error when I tried to install it on my pc.

  What I did:

  1. run the cleanup utility on the Local C drive windows disk

  2. restart your computer.

  3 run ccleaner , then click on "cleaner".

  Then, got to 'Register' then click Scan then click Fix all issues...

  4. prior to installing the Sims 3 game, clean installation disk using a disk cleaner and a microfibre cloth. Make sure the disk is dry until you load it in your DVD player.

  5. once the installation is complete, restart the computer. Then, refer to steps 1-4.

• Close an interface based on the CRC errors

  We have 4510 with double 10 gig links to 6509.  When one of our interfaces begins to accumulate the crc errors its impact on latency and availability of our users behind the 4510.  Either the interface err - disable or manually stop us it and the other link 10 gig is unlocked by spanning tree and the traffic starts to flow as usual.  Is it possible to use the EEM to detect these errors and entry of the crc and stop the interface?

  I'm looking at the below as resolution:

  Te5/1 trap to bypass authorization event manager applet

  "event TenGigabitEthernet5/1 setting input_errors_crc entry-op name interface entry-val 0 entry value output-comb type or output-gt exit-val 0 exit value type op - the exit time 5000 output-event-polling interval of the true 100 maxrun 10000.

  action 1 cli command "configures terminal.

  Action 2, command cli "te5/1 interface.

  Action 3 cli command "shutdown".

  An EEM applet will work for you, but the way you have it designed could not do what you want.  Try this:

  authorization of monitor_te51 event handler applet work around

  event interface name TenGigabitEthernet5/1 setting input_errors_crc entry-op gt entry-val 0 increment type entry exit-val 0 out of operation eq output-type increment

  command action 1.0 cli 'enable '.

  Action 2.0 cli command "config t.

  Action 3.0, command cli "int DUREE5/1.

  action 4.0 'closed' cli command

• CRC error during the file hard copy

  The hard file is the virtual machine on VMServer 2.0 running on winXP OS host and client OS winXP. Recently we intend to move the virtual machine on a new computer, and when we try to copy the hard file to another PC (via network) or on an external hard drive, the copy always failed in the middle with CRC error. We tried to do a chkdsk but did not find any problem with the hard drive, so we think it might be the bug in the such hard mentioned in the following threads:

  http://communities.VMware.com/message/60134

  http://communities.VMware.com/message/13921

  The second thread has proposed a solution to build the virtual machine using .pln instead of hard, but is there a way to convert existing hard file .pln?

  This bug has been addressed in the latest version of VMServer 2.0?

  All the information and experiences on the similar bug will be appreciated.

  the two posts that reference you are so old that they no longer apply

  I saw myself of crc errors recently, when using a virtual machine on an external USB drive.

  The problem was a dying USB - port was not working correctly I also had bad blocks on the disk.

  So the first thing to do is to check your hardware.

  I've not seen crc-errors due to bugs vmdk in 5 years - so you can exclude

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

  You find me also in the PhD Virtual Backup support team

• CRC error SP2 80070017 error code

  I'm trying to install SP2 for my Vista Home Premium 64-bit (SP1), but get the CRC 80070017 error code.

  I tried the suggestions in SP2 will not install code 80070017 be without success.

  I ran the SFC and it stopped at 19% and say me that damaged files where found, and some could not be repaired.
  The SBC.log, the System File Checker, is 3 MB big and full of errors.

  I tried the Checksur KB947821 and I get this:
  -----
  Audit of manifest Package and catalogs.
  (f) CBS servicing\packages\Package_for_KB960714~31bf3856ad364e35~amd64~~6.0.1.0.cat catalog missing 0x00000002
  ...
  'and so on, continuing the KB960714 trace '.
  Summary
  Found 19 errors
  Payload CSI file missing Total Count: 15
  Catalogue of CBS missing Total Count: 1
  CBS Watchlist package missing Total Count: 3
  ----
  I tried to install the patch KB960714, the newspaper above and failed.

  Last update was KB947821 yesterday.

  The material is Intel Core2Duo E8400, 4 GB RAM, Radeon HD4850.

  Help, please.

  Thanks for your quick response.

  I did the steps mentioned above, see my first post and failed.

  What I did to reinstall the system, is not formatting the HD or anything, everything Vista reinstall and reactivate it.

  Then I updated my system, 56 updated and checked the system with SFC/scannow, the answer... .found no violation of integrity.
  Downloaded SP2 from a stand-alone installation installation process.

  Everything worked fine , now I have to deal with the ASUS software that the monkey went, but this isn't a big deal.

  See you soon

• Satellite A200 PSAEC: Vista graphics driver file is damage - CRC error

  Hello

  There is problem with the ZIP file
  I try WinZip and Power Archiver

  Sorry, but I see no problem here. I downloaded the zip file and everything is ok. Try again.

• Re: Internal error CRC on satellite

  Hello

  I'm trying to restore the operating system on my mother in laws equium. I say yes to erase the entire hard drive and it gives me the plugin screen of your power to say and that is to copy the new files, then I get a crc error internal to the Y then a different location each time (usually in music).

  I tried to use another drive of toshiba and also just an os disc. I tried a disc hard diferent and also another dvd player.

  Can anyone help?

  Thank you

  Clare

  Hello Clare

  Please don't get me wrong, but your ad is quite confusing.
  Each Toshiba laptop comes with the pre-installed operating system and install recovery disc. New laptop models are supplied without disk recovery, but with the recovery image saved on the HARD drive and it can be used for the installation of operating system.

  It will be interesting to know what model of laptop do you have and do you use original Toshiba Recovery for the OS installation disc.

  To be honest I don't know what to do, you mean under another drive of Toshiba or just OS disk.
  It is not understandable that you think average with different hard drive and also an another dvd player.

  The whole story is extremely confused. It will be nice if you can provide more specific information.

• Crc wireless P60 errors

  I can not connect my P60 to the local wireless network at work. I have a good signal (the router on the same desk), but Windows just goes to "detecting network type" and then said that the network is out of range.

  Atheros client utility shows that I'm not 100% crc errors and no packets received ok.

  I tried to remove and reinstall the drivers and also the donwloaded later on the Toshiba site.

  This indicates a hardware failure? I felt so I got the screen repaired and have not tried the wireless since.

  Hello

  You're talking an Atheros utility then I suggest that this software is installed on your operating system.
  AFAIK the Atheros Client utility to configure your wireless connection.
  In this case, the Windows wireless configuration must be disabled.
  Please, go to the wireless options and disable the option use windows to configure my wireless network

  Good bye

• VCE vblock, LSI_SCSI: Reset for device \Device\RaidPort0 ERROR in VM Windows Event logs

  Hello, I have been a problem for some time and I can't seem to understand this issue. Basically, the VM freezes but returns after 30 seconds.
  I found the problem was present on all data warehouses and even showed errors for for guests (san boot) boot sector. After changing the round robin at the fixed path on data warehouses to use a specific fiber channel switch LSI_SCSI errors were gone on all data warehouses, VM ect... everything worked normally.
  We have an installation program VCE vblock with UCS (blades), Nexus 5ks and VNX.

  So basically, we were troubleshooting paths FiberChannel beside the UCS to the VNX. We have changed ports on the VNX SP but side A was always bad / good B... Compared the configs of nexus for the two, identical configs/features beside the specificities as VSAN ect. Examined the configs for the UCS, but are fundamentally the same with Setup on the side B, but everything looked good. Nothing is defective.
  I noticed Tx errors on ports of module e/s and CRC errors on ports in the Nexus. Thought it might be a bad fiber so I replaced... The problem is always present. Any ideas? Thanks in advance!

  Data Center:
  UCS: 5108 Chassis, IO module 2104XP (2.2 (3g)), blades B200 M2, fabric 6120XP interconnections (5.2 (3) N2 (2.23 g))

  5.5 ESXi update 2

  2 nexus 5ks

  VNX 5500

  I found the culprit, SFP. The FPS that were used throughout the entire upward was incompatible and FUBAR would. Not match speeds, single mode when it should have been multi ect. Just all around the nightmare. It's on EVERYTHING from the VNX to IOM simply ridiculous. After completing the gutting of the SFP and the fiber, replacement and then delivered at the point of the chassis of the UCS everything was great. Honestly, I don't know how it worked at all with this configuration. Anyway, if you want something done you have to do it yourself.

• Satellite U200 - 181 built-in HDD ERROR

  "Toshiba Satellite U200-181", I bought 2 weeks ago. Recently (2-3 days ago) I have problem with built-in HARD drive.

  So the problem is that sometimes I get the "Built-in HARD drive ERROR" message when starting the laptop. This integrated "Disk ERROR" message appears from time to time and the system shuts down the HARD drive starts, but can start from other bootable devices. First time where the built-in "Disk ERROR" message took place, he was accompanied by a lot of strange pop sound beating from the inside of the laptop. All others

  "HARD disk ERROR" messages were not so strong and strange beating pops, but always with some pop sounds (not as strong as the premiere).

  To identify possible problems, I saved S.M.A.R.T. data log (see annex 1).

  Additional information: after I bought the laptop I ve made successful update BIOS version 1.40 version 1.50 strictly according to Toshiba site official instructions. After BIOS upgrade system works well, no ERRORS, no exceptions. But 3 days ago I received the message"built-in HARD disk ERROR '."

  Any ideas? Thank you.

  : #1

  ================================================== ==========
  This folder made by Active SMART
  http://www.ariolic.com/activesmart/
  ================================================== ==========

  S.M.A.R.T. status
  Date: 2007-01-18 20:05:32

  Model name: HTS541080G9SA00
  Serial number: MPBDL0XKKE3RBG
  Capacity: 80.0 GB
  Firmware: MB4OC60R
  Drive interface: IDE
  Current temperature: 35 ° C (95 F)

  ------------------------------------------------------------------------------------------------
  The name threshold value worst raw attribute value
  ------------------------------------------------------------------------------------------------
  1 (01) raw Read Error Rate 62 100 100 0
  2 (02) flow Performance 40 100 100 0
  3 (03) spin Up Time 33 253 253 55834574849
  4 (04) start/Stop Count 0 100 100 363
  5 (05) reallocated sectors count 5 100 100 0
  7 (07) seek error rate 67 100 100 0
  8 (08) seek Time Performance 40 100 100 0
  9 (09) hours powered 0 100 100 194
  10 (0a) Spin Retry Count 60 100 100 0
  12 (0C) device Power Cycle Count 0 100 100 256
  191 (BF) G-sense Error Rate 0 100 100 0
  192 (C0) stop retract Count 0 100 100 5177348
  193 (C1) Load/Unload Cycle Count 0 100 100 4300
  194 (C2) 0 157 157 231929348131 temperature
  196 (C4) reallocation Event Count 0 100 100 0
  197 (C5) current pending sector Count 0 100 100 0
  198 (C6) incorrigible sector Count 0 100 100 0
  199 (C7) Ultra DMA CRC Error Count 0 200 253 0
  ------------------------------------------------------------------------------------------------

  To my knowledge, the error sometimes because the BIOS can not find the HARD drive as a source of start-up. Perhaps because of the loss of connection or / and a malfunction of the HARD drive.
  Hmm, have you checked if the HARD drive is connected properly?
  The losing may be a strange reason for the beating POPS.

• Satellite L500 - ERROR = copy of splitpart or Canadian Red Cross failed!

  Well, I tried to reinstall vista with the cd/dvd recovery I ordered. I tried both versions 32 and 64 bits on disk, but as soon as it reaches a certain point on disc2 (copy some .swm files 7/9), the error "copy of splitpart or Canadian Red Cross failed!" appears.
  I googled on the CRC errors, but I think I can exclude most of these things such as cable, the scratches on the disc, a.s.o. loose connections unless it has something related to the hard drive... but I could install non - oem vista without any probs, not sure if it's really hard partner.
  I hope someone can help me here.

  Post edited by: babtong

  Hmm maybe you need to format the HARD drive first?
  Clear all all the partitions to format HARD drive and try again the recovery disc may be a few partitions tables start affect installation

  If there is something wrong with the recovery disk and maybe you need to order a replacement

• Windows Vista update KB980248 on my Sony VGC-JS160J installation returns error code 80070017

  There is a persistant problem with my computer. It is a 64-bit system with Pentium Dual - Core CPU E5200 @ 2.50 GHz and 4.0 GB RAM.

  No idea why the update fails? What are the consequences of not being able to install it?

  The errorcde means that you have a CRC error. In order to check your HARD disk for error (chkdsk C: /r f). ALS try to download the update from the download area:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=c16e703f-5a4a-4e8a-8998-87eda1efc302

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Error - when you try to delete a file and re - install a program

  Can someone help me pls? A program has stopped working for me, so I tried to remove and reinstall and I'm having no luck.

  I don't see any more on Add/Remove Programs, but when I look under C/program files, I still see the folder here. When I try to delete the folder, I get an error ' cannot delete r2.bmp: data error (cyclic redundancy check). "

  When you try to download this same program again, it says "Setup encountered a disk write error. Please ensure that all other applications are closed before starting the installation. In addition, ensure that the destination drive has enough space and that you have the necessary access rights. "For starters, I havve nothing else open. Shows user accounts I have "administrator rights."

  I'm stuck here, without being able to delete the folder or download again. I'm new to computers (wish I knew more). I watched how do I know which system I have and I have XP.

  Can any of you help me pls?

  Cyclic Redundancy Check (CRC) errors are usually associated with the hard disk errors.  The best first approach to solve this problem is to do a complete check of the disk.  The short version of the procedure to follow is:
  Under "My Computer", right click on the C drive :-> properties-> tools (tab)-> 'Check now'
  Check out the options and 'Start '.  He will complain that it cannot do it now and tell you that it will do so at the next startup.  Accept the warning.
  Restart your computer and let it complete the disk check.

  More info is here:
  "How to perform disk error in Windows XP check"
     <>http://support.Microsoft.com/kb/315265 >

  WARNING: This control is performed before Windows starts, can take two hours or more and can not be interrupted.  Do it when you won't need your computer for awhile.  Also, it would be prudent to update your backups before the race.

  HTH,
  JW

• Error code: 80070017 (cannot install updates)

  OK so I tried to fix my computer grandfathers for the last three days and he repeated to me that there are 2 important updates but I'm trying to install and a code 80070017 error keeps popping until I do?

  Hi Jessica,.

  CRC (error code) errors occur when there is a bad spot on the media of your hard drive. Repair disk and data recovery are often possible with the right tools.

  Let's try the following:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  , Type sfc/scannow go and let it run.  It will scan and try to the difficulty of some of your system files.  If all goes well it will complete with no corruption, could not be repaired (if there are these post of corruption here or try to analyze it to find the problem or files using

  ( http://support.microsoft.com/kb/928228).

  While in the command prompt, type chkdsk /f /r and enter and let it run.  They tried to set itself to run at the next reboot.   Answer Yes and restart to run the program.  It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.

  I hope this helps.  If this isn't the case, please send in your reply the names and update KB numbers and the exact version of Vista used (e.g., 32-bit Vista Business SP2).

  Good luck!