VCE vblock, LSI_SCSI: Reset for device \Device\RaidPort0 ERROR in VM Windows Event logs

Similar Questions

• User profile service, you have been logged with the default for the system profile, please see the the event log for more information or contact your administrator.

  User profile service... Help... I'm stuck and going nowhere.

  Hello

  Whenever my user try to connect this MSG poping up to the top of any solution please.

  User profile service

  you have been logged on with the default for the system profile, please see the the event log for more information or contact your administrator.

  Click on this URL and follow the instructions 100% your problem has been resolved http: //support.microsoft.com/kb/947215

  Try it.

• Access device on emulator 4.7 storm event log

  Hello

  How can I access the viewer event log of device on the emulator of storm?

  I found an online source saying you had to get it in landscape mode, and then press Alt + ' / ' / but the emulator screen does not switch to landscape mode when on the home screen.

  See you soon

  Press and hold the '? 123 'key to lock the keypad, press', 5, 5 "

  (comma 5 comma 5)

• Follow-up for certain Windows event log error

  Hello

  In the past I posted here, request technical Support and has tried many times in Foglight to install to the top of the cartridge from Windows to monitor events in the log events Windows for some, but I've never had very good luck.  Recently, I was responsible for implementing Foglight to monitor ALL our servers SQL Server with the following scenario:

  Event type: Information

  Event source: MSSQL$ SE

  Event category: (2)

  Event ID: 833

  Date: 02/01/2013

  Time: 09:34:52

  User: n/a

  Computer: AZPH-SRV-SQL51

  Description:

  SQL Server has met 2 exceedances of IO requests last more than 15 seconds to complete the [i:\Microsoft SQL Server\MSSQL.2\MSSQL\Data\EVVSGVAULSTOREGROUP_1_1LOG.ldf] file in the database [EVVSGVAULSTOREGROUP_1_1] (11).  The operating system file handle is 0 x 0000000000001680.  The offset of the e/s, last long is: 0 x 00000005263400

  I know I have to put in place a LogFilter, but should I just configured for each server on which an instance?  There are more than 100.  In addition, advice on the implementation of the LogFilter would be greatly appreciated.  As I said, I never really managed to set these correctly.

  Thank you

  Paul

  A journal of events rule already exists. In the attachment, you can see an example of the alert generated by the event log rule. The rule also has an action to send e-mail to the variable registry SYSADMIN.

  I advanced and forced an event occurs for example. I did have to define what event to look for. I left by default does not include. It's been a while since I used the event tracking feature, but I think that if you exclude offshore you can then include specific events.

  You can set the event category to monitor in a Windows_System agent startup properties.

  

  David Mendoza

  Foglight Consultant

• Ethernet controller for devices drivers not install on Windows 7 (32 bit)

  Hi all

  Need a bit of help (Neo red) says

  No seriously, I'm ready VMware 7 and I converted my laptop to a VMware image running Windows 7 32 bit.

  Everything works as expected, however my ethernet (Nic) controller display Code 28. The drivers for the device are not installed.

  I installed VMware Tools and operating system selected for the image is Windows 7 32 bit. I also tried to update the drivers, however drivers are not found.

  All proposed would be appreciated.

  Please note that I printed my VMX file below.

  

  . Encoding = "windows-1252".

  config.version = '8 '.

  virtualHW.version = "7".

  memsize = "2048".

  MemAllowAutoScaleDown = "FALSE".

  displayName = "LPT - 3001.prime - uk.local.

  guestOS = "windows7"

  numvcpus = '2 '.

  Serial0.present = 'TRUE '.

  Serial0.FileType = "peripheral".

  Serial0.filename = "auto-detect".

  Serial0.AutoDetect = 'TRUE '.

  Sound.Present = 'TRUE '.

  Sound.FileName = "-1".

  Sound.AutoDetect = "TRUE".

  USB. Present = 'TRUE '.

  ethernet0. Present = 'TRUE '.

  ethernet0. AddressType = 'generated '.

  ethernet0. ConnectionType = "bridged".

  ethernet0.startConnected = 'TRUE '.

  Ethernet1. Present = 'TRUE '.

  Ethernet1. AddressType = 'generated '.

  Ethernet1. ConnectionType = "bridged".

  Ethernet1.startConnected = 'TRUE '.

  ide0:0. Present = 'TRUE '.

  ide0:0. FileName = "LPT - 3001.prime - uk.local.vmdk.

  ide0:1.present = 'TRUE '.

  ide0:1.AutoDetect = 'TRUE '.

  ide0:1.filename = "automatic detection".

  ide0:1.DeviceType = "cdrom-raw"

  MKS. Enable3D = 'TRUE '.

  vmci0. Present = 'TRUE '.

  EHCI. Present = 'TRUE '.

  annotation = «»

  pciBridge0.present = 'TRUE '.

  Tools.Upgrade.Policy = "useGlobal".

  pciBridge4.present = 'TRUE '.

  pciBridge4.virtualDev = "pcieRootPort"

  pciBridge5.present = 'TRUE '.

  pciBridge5.virtualDev = "pcieRootPort"

  pciBridge6.present = 'TRUE '.

  pciBridge6.virtualDev = "pcieRootPort"

  pciBridge7.present = 'TRUE '.

  pciBridge7.virtualDev = "pcieRootPort"

  extendedConfigFile = "LPT - 3001.prime - uk.local.vmxf.

  floppy0. FileName = "a":

  virtualHW.productCompatibility = "hosted".

  ethernet0.generatedAddress = "00: 0C: 29:26:12:9 d.

  Ethernet1.generatedAddress = "00: 0C: 29:26:12:a7.

  UUID. Location = "56 4 d 1f 86 ba a3 e8 bd - 15 34 17 36 26 12 9 d ea.

  UUID. BIOS = "56 4 d 1f 86 ba a3 e8 bd - 15 34 17 36 26 12 9 d ea.

  ide0:0. Redo = «»

  vmotion.checkpointFBSize = "134217728.

  pciBridge0.pciSlotNumber = "17".

  pciBridge4.pciSlotNumber = "21".

  pciBridge5.pciSlotNumber = "22".

  pciBridge6.pciSlotNumber = "23".

  pciBridge7.pciSlotNumber = "24".

  usb.pciSlotNumber = "32".

  ethernet0.pciSlotNumber = "33".

  Ethernet1.pciSlotNumber = "34".

  sound.pciSlotNumber = "37".

  ehci.pciSlotNumber = "38".

  vmci0.pciSlotNumber = "39".

  ethernet0.generatedAddressOffset = '0 '.

  Ethernet1.generatedAddressOffset = "10".

  vmci0.ID = "908464797".

  ethernet0.linkStatePropagation.enable = "FALSE".

  scsi0. Present = 'TRUE '.

  Ethernet1.wakeOnPcktRcv = "FALSE".

  scsi0.pciSlotNumber = "16".

  cleanShutdown = "FALSE".

  Replay.Supported = "FALSE".

  Replay.FileName = «»

  USB:1.present = 'TRUE '.

  USB:1.DeviceType = "hub".

  ethernet2. Present = "FALSE".

  ethernet3. Present = "FALSE".

  ide0:1.startConnected = 'TRUE '.

  tools.syncTime = "FALSE".

  unity.wasCapable = 'TRUE '.

  USB:0. Present = 'TRUE '.

  USB:0. DeviceType = "mouse".

  doesn't matter - just add them to the end

  ___________________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• T500 w Vista hangs light w HDD and event log error iastor with ID 9 (Device\Ide\iaStor0)

  Summary

  Edited: This problem was finally resolved by Intel Matrix Storage Manager driver 8.6.3 sent by Lenovo, January 13, 2009

  It is an intermittent problem on 500/T400 with XP or Vista 32.

  Vista 32: the HARD drive light stays on for several minutes, sometimes never goes. The machine crashes immediately, or it may continue to work for a while sometimes sluggish performance w. In all cases the operating system stops not completely so that the HARD drive light is forcing a hard stop with the keyboard, button on / off.

  XP: random BSOD of iastor.sys.

  In the log window of the events is an event of error each time passed than the HDD light grip. Source is iastor, Id is 9, and the text is "the device, \Device\Ide\iaStor0, did not in the expiration time. See below for a description of how show all events iastor error 9 in your event log.

  The problem has appeared since the second or third week of December. The likely source is an update of the Intel Matrix Storage Manager, driver version 8.6.0 delivered on 4 December.

  This driver has been after December 4, distributed via Thinkvantage System Update. T400/500 made in December were also shipped with this driver installed. Since then, lenovo has withdrawn the driver, drivers, T400 and page software here and the T500 here page now shows the driver for Vista 32 and XP as version 8.2.4.

  The experience is that this problem is solved in the restaurant or by installing the 8.2.4 version of the Intel Matrix Storage Manager driver. If the 8.6.0 driver was installed through system update, go to Device Manager and open the Intel(r) ICH9M-E/M SATA AHCI Controller. On the driver tab, make sure that 8.6.0 is installed, and then click the roll back button.

  If the T400/500 has been shipped with the 8.6.0 driver installed, first driver to download the 8.2.4 and run the extract in the c:\drivers folder. Update driver then choose Device Manager. On the second screen appearing to ensure you choose "Let Me pick from a list of drivers on the computer' - in the case otherwise, he will tell you, best driver is already installed when you click Next. In the next screen, select Intel(r) ICH9M-E/M SATA AHCI Controller and click on "disk" and on the next screen, specify the path c:\drivers\win\imsm.

  PS review iastor in case connection error messages comparing them to the update system install history as follows:

  1. in Control Panel, in administrative tools, open the Windows event log. If this is not the first time, you use the newspaper, you may need to select the local newspaper - the top left - line for the Summary window to open in the Middle, you can maximize this window down.

  2. Select the error line in the Middle window and click Show all instances of this event on the right side. All error events are now listed in the Middle window.

  3. click on filter the current view on the right side. In the new menu, enter 9 in the field of event ID, select ok and then Yes.

  4. you should now have a list of all occurrences of the error in iastor event. Scroll through the list and note the timestamp of the first occurrence of the error.

  5. open Thinkvantage System Update, then select historical spectacle of installation. Scroll the window to the right you see the timestamps. Examine your updates, just before the message in iastor appeared first in your event log.

  __________________________________________________________

  Original entry

  My new T500 a few days after the execution of the first update of the system began to hang once or twice every 24 hours with light on HARD drive and "the device, \Device\Ide\iaStor0, did not in the expiration time" in the registry.

  ,

  iastor is the Intel Matrix Storage Manager (MSM) for their device RAID/AHCI controllers. The Intel AHCI controller listed in as installed for the T500 shows version 8.6.0 Device Manager, which is the current version according to the Intel web site.

  There are zero warnings to disk in the event log errors, I ran the drive diagnostic - the drive is healthy. I don't think that this is a problem of DVD or disc, it's the MSM which is a failure.

  Googling on the MSM error message there is a certain. A batch is since last year and concerns of Intel THAT MSM supporting properly - l/min, this has been fixed in MSM 7.5.0 see http://www.intel.com/support/chipsets/imsm/sb/CS-025783.htm

  A second batch was held earlier this year for Dell laptops that, without looking into the details, seems to have been caused by an incompatibility between the BIOS and the MSM reported. (Update system to update my BIOS to 1.20 - 1, 01).

  Other solutions to this problem found on the web include the removal of iastor/MSM settings in the Windows registry to disable l/min and turn off AHCI in the BIOS.

  It would be nice to be able to verify that this isn't a hard drive problem by disabling the AHCI and therefore the Intel controller. How to do that in T500 BIOS Setup and what are the implications on the performance of my drive (Hitachi 160 GB at 7200 RPM)?

  
  

• The application has failed to start because its side-by-side configuration is incorrect, please consult us or application event log the sxstrace.exe tool of command line for more details?

  I am using Cyberlink PowerDirector 9 and the above message keeps popping up. Help?

  Hello

  Thanks for posting your question in the Microsoft Community!

  The problem may occur if your computer does not have the correct C++ runtime components for your system type. (X 86 or x 64).

  We will try the following methods and check the result.

  Method 1:

  Install the latest Microsoft Visual C++ has helped users fixing the issue.

  Later supported Visual C++ downloads

  http://support.Microsoft.com/kb/2019667

  Method 2:

  You can also try uninstalling and reinstalling Cyberlink PowerDirector 9 to check if that helps:

  For more information, see the following link:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  For more details on this topic, see the event log using Event Viewer. Please see the link below for more information on how to use Event Viewer to check the error message or information:

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Please check the information in Event Viewer and let us know the question briefly to provide you with a better solution.

  I hope that helps!

  If the problem persists, or you need help on Windows please keep us informed.

  We are here to help.

• Error 16 recording Acrobat Reader DC for Windows event

  Hello

  I uninstalled Acrobat Reader XI.0.10 today (which had no eventlog errors at all for my Win 7 x 64, nicely updated Office Update), and made a clean install of the new Acrobat Reader DC Dutch.

  The drive works perfectly, but whenever I start the application, it creates a 16 red error in the windows event logger. The only information of the event contains readings that "Acrobat reader tries to reach a component that is not installed or damaged on my computer. Try to re - install it... »

  I did, but the 16 error keeps coming back on... I completely uninstalled CD player and reinstalled the old Acrobat Reader XI.0.10 once again, and all 16 errors are gone, so there must be a bug in the new drive DC-application/install.

  Anyone have the same problem or a solution?

  Thanks, Rik (Belgium)

  This problem should now be resolved in the quarterly July 2015.

• What happens if the previous owner of ipad forgotten their password and they are not original owner so that they do not have. their system crashed and they reset their device. so they just lost $ 300? It is NOT stolen or lost.

  What happens if the previous owner of ipad forgotten their password and they are not original owner so that they do not have. their system crashed and they reset their device. so they just lost $ 300? It is NOT stolen or lost.

  It requires the Apple ID and password from the previous owner. If you don't have it and can't get it, then the device is useless to you. Return it for a refund if you can.

  Find my iPhone Activation Lock

  Check in the future first before you buy second hand: How to check for Activation lock before buying a second hand iPhone.

  Find my iPhone Activation Lock

  Find my iPhone Activation Lock - remove a device from the account of the previous owner

• \Device\RaidPort0, restore the device, has been published. Event ID: 129 storahci

  Hello

  I have a DELL XPS 13 9343.
  I did a clean install of Windows 10 and downloaded the drivers from dell.com.
  I am also running Hyper-V.
  I'm repeated warnings in my saying system Envent Viewer:

  \Device\RaidPort0, restore the device, has been published.
  Source: storahci

  Just before I get these events my computer freeze for 10-20 seconds and I can´t anything.
  It's very annoying, and I hope there is a fix for this?
  Thanks in advance.

  I had exactly the same problem on a lot of my dell systems. Here is how I solved the problem:

  First we need to change ""AHCI Link Power Management " which is a setting hidden in power management." Open the registry editor and change the following settings.

  HKLM\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\0012ee47-9041-4b5d-9b77-535fba8b1442\0b2d69d7-A2A1-449c-9680-f91c70521c60

  Change 1 to 2 attributes

  HKLM\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\0012ee47-9041-4b5d-9b77-535fba8b1442\dab60367-53fe-4FBC-825e-521d069d2456

  And again change the attributes of 1 to 2.

  Now, go to the Control Panel-> system and security control-> Power Options , click on "Change Plan settings" and then click on "change power avancΘs."

  Now under "Hard disk", you should have AHCI Link Power Management - HIPM/DIPM and AHCI Link Power Management - Adaptive options.

  
  Change the 'AHCI Link power management' active, meaning that there is no AHCI power management and finally change adaptive to 0 milliseconds (well if you have enabled "active" this option has no effect).

  Finally under "PCI Express" change "Link State Power management" to OFF.

  I hope this will help you.

  Good luck!

• Password reset/bypass device

  OK, here's my problem... When I turn on the phone, it is locked and wants the password for the device.  Is there anyway to reset or bypass the password?  I bought this phone from a friend who went to jail and now I can't ask him how to open it.  I know that many of you here can help Traffic.

  Some info on the phone

  Motorola

  FCC ID: ihd756fq1 EA3 ATS

  IC: 109 O - FQ1

  DEC: 02707803735 model: rev Q H/W, a

  Hex: 1 B 771357 HEJ 9 66 U #1vf3

  Is there anyway to reset this device password?

  Switch the phone off. Then hold down the silver button and then press and hold the red button. Hold down until you see "Master Reset" or not. Press Yes and returns to manually reset the phone to restore access.

  Mark

  Support Forums Manager

• HP 15-r007tx = pci device sm bus controller drivers for devices and missing

  Well Hello hp. I bought a 15-r007tx hp Tower a week back. My os is windows 8.1. It's a duplicate operating system.

  in fact, I was downloading my drivers of hp's official website and I noticed that the sm bus controller and drivers pci for my knees disappeared. I searched on the Web site by changing the region, but it didn't help out me.

  can you please give me the link to download my sm bus controller and the drivers for pci devices... Please...

  Hello:

  You need these drivers for devices.

  SMBus:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-130504-1 & CC = US & DLC = in & LC = on & os = 4158 & Product = 7089866 & sw_lang =

  PCI:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-134096-1 & CC = US & DLC = in & LC = on & os = 4158 & Product = 7089866 & sw_lang =

• Card programming for devices

  Where you turn for specific information, programming interface for devices such as webcams, etc.

  All MFG seems to keep the details of the Protocol between W7 and a private aircraft.
  It must exist somewhere.  Need to write an application for a specific camera: HP KQ246AA.

  Hello

  You must contact the HP Support, see their books online and there may be
  more help in the HP Forums. You can also see the sales of HP.

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Can someone link me to some documents that NetBIOS is required for devices inherited from Windows to function properly?

  NetBIOS and Windows Legacy Machines

  Can someone link me to some documents that NetBIOS is required for devices inherited from Windows to function properly?

  Maybe even a link to a Microsoft web page that States this as well.

  I understand the security risks inherent with opening ports 135 and 139, but they are needed within the network for some devices to function correctly, just need a documentation that indicates that.

  Hello

  See the links below and check if that helps.

  http://TechNet.Microsoft.com/en-us/library/bb727013.aspx

  http://TechNet.Microsoft.com/en-us/library/cc940063.aspx

  http://TechNet.Microsoft.com/en-us/library/cc738412 (WS.10) .aspx

  Thank you

• Windows cannot be installed on the drive needs the driver for device

  Transition from XP to Windows 7 Edition Home Premium. I'm following the instructions to upgrade to XP.

  Primary IDE Channel - how to find what device needs a driver and then go in and install it?

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the drivers card mother/chipset (F6 during installation of Windows 7), SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com