Create a second instance for Oracle 11 g on Windows Server 2008

Similar Questions

• What is the hardware configuration recommended for 11 G R2 on Windows Server 2008 R2 64 bit

  We are about to move from 10 G to 11 G R2 R2. The platform provider supported for our application is Windows server 2008 R2 64-bit. I have to write a specification document to support my request for new material and I would like some guidance as to the recommended configuration. Environment development database server will have to host dev, test, and preliminary databases for a database of 10 GB. The production server will host only the production database.

  Any guidance appreciated.

  concerning

  Madre

  Hello

  It's all sorted out.

  concerning

  Madre

• Oracle Database 11g - with Windows Server 2008 R2

  Hi all respected gurus!
  
  Recently I downloaded the Oracle 11 g - R2 database.
  
  Will it work with Windows Server 2008 R2?
  
  Please guid of the GEM.
  
  Thanks in advance.
  
  Mohammed Uzair
  Oracle applications developer
  Oracle APEX developer
  Pakistan
  + 92 (333) 7058754

  Yes, it does not work.

  What are the results when you do?

• Creation of domain to 0% - Oracle 11g - Windows Server 2008 64 bit PFRD

  1.i want to install and configure Oracle FMW version 11.1.1.2.0 in Windows server 2008 64 bit.
  
  2.i have followed the steps too as described here in these links two forum:
  1.http://CN.forums.Oracle.com/forums/thread.jspa?threadID=2245015
  2.creation area at 0% - Oracle PFRD 11 g - Windows Server 2008 64-bit
  
  3.I give my installtion No...
  
  I installed the JDK: 1.7.0.
  I have correctly installed web logic version wls1035_generic.jar.
  I also installed the version 11.1.1.2.0 FMW using all four disks (installation and donot set up).
  I also installed the fix 11.1.1.3.0 version.
  But when I am trying to run config.bat then it stops in the field of the creation to 0%, nothing happens, process sleeps:
  He created the field of size 9,23 mb and it displays "DOMAIN CREATION FAILS" after a long period of approximately 900 min.
  
  
  I also checked the path... It contains no special characters.
  
  
  
  Any ideas?

  You did not follow the instructions in the other links. Not at all. If you did, you would know:

  First of all, you need to use JDK 1.6
  Second of all, you have to match to the FMW WLS version you want to use (you should use 11.1.1.4, is told by the way).

  You should:

  (1) install JDK 1.6
  (2) installation of WebLogic 10.3.4 (or, if you want to use FMW 11.1.1.3, install WLS 10.3.3)
  (3) install FMW 11.1.1.2
  (4) install 11.1.1.4 patch (or 11.1.1.3)
  (5) proceed with your configuration.

  John

• How to disable the product key Windows Server 2008 R2 on Oracle Virtual Box?

  Original title: disable the windows server 2008 r2 key

  I have oracle VM and activated windows server 2008 r2 on a virtual machine. I just VMware workstation God 9 and I would like to reactivate in a VMware virtual machine. How can I disable the key so that it can be reactivated?

  Click Start, type: CMD
  Right-click on CMD
  Click on run as administrator
  At the command prompt, type: slmgr.vbs - upk

  Press enter, this will uninstall the product key of the computer and to the evaluation mode, you are now free to use it on another computer. If you experience problems, try to activate by phone:
  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.

• Oracle 10.1.0.4 on Windows Server 2008 64 bit Standard

  Hello
  
  For purposes of migratiion, we would need to install Oracle 10.1.4.0 on a Windows Server 2008 64 bit Standard and then update to 11 g.
  We forced installation Oracle 10.2.0.4 on a Windows Server 2008 64-bit Standard, but we are not safe for 10.1.0.4.
  
  Given that we do not have this version of the software to try it and we are looking for it, is it possible to install Oracle 10.1.4.0 on a Windows Server 2008 64 bit Standard?
  
  Could you point me to a document referring to Oracle versions compatibility with Windows Server 2008?
  
  Thank you

  At MOS, click the Certificates tab, and then enter the database in the first menu drop-down and select the RDBMS. Then enter the relevant information in other blocks, and then you will see the database Oracle 10.1.0.4.0 is not certified for Microsoft Windows x 64 (64-bit) 2008 R2

  Certification is a little stricter than the support, but extended support ended in January.      REMINDER: First Support for Oracle Database 10.1 ends January 2009 [761713.1 ID]

  There is always a lifetime support, but your case shows how useful that can be.

• ORACLE_HOME in Oracle RAC 11g (Windows Server 2008)

  Hello
  
  I've got 2 two nodes in a RAC Oracle 11 g in Windows Server 2008. Oracle software is installed in directory.
  
  I realized that it has not been set ORACLE_HOME path. In the properties-> advanced-> Environment Variables, I see that ORACLE_HOME is empty.
  
  -Which way would be the ORACLE_HOME: C:\app\bd\product\11.2.0\dbhome_1
  -You have set up the same in the two nodes?
  
  Thank you

  I realized that it has not been set ORACLE_HOME path. In system-> Advanced-> Environment Variables properties, I see that ORACLE_HOME is empty.

  its normal behavior

  -Which way would be the ORACLE_HOME: C:\app\bd\product\11.2.0\dbhome_1

  If you have installed this location, Yes

  -You have set up the same in the two nodes?

  in fact, you don't have HAVE to, its not need at all

• Create a Windows Server 2008 R2 DVD for Installation of the EFI

  Is there an official method of production of compatible installation media EFI for Windows Server 2008 R2.
  I created successfully using a rough method to recreate an iso using the original media and oscdimg.exe set out in a number of unoffical positions elsewhere.  However, I ran into another issue that fits the description that is described in the following article.

  http://support.Microsoft.com/kb/975535

  I expected that the fix provided in this article would have been incorporated in SP1 of Server 2008 R2 version, but has been unpleasantly surprised to find that there was still no support. I'm more than happy to include the fix in the media but it seems that the files are identical apart from the creation date.

  I have completely updated the firmware of my server to set the server up to EFI Shell Version 2 which I hoped would solve some problems, but this did not help either.

  It seems EFI will be the way forward because of size limits of hard drive on startup disks until when can we expect a real sollution?

  If anyone has any experience with this issue so any help would be greatly appreciated.
  Thank you

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Backup online / offline for Oracle 11 g on windows

  Hello
  
  I want some scripts to backup online / offline for Oracle 11 g on windows without the use of backup tools.
  Also looking for something that we could use to put the database down, backup the data offline files, and then rise again. Scripts need to verify that the database is down cleanly,
  been backed up successfully and was replaced and opened successfully.
  If any of these steps fails, an alert notification should be displayed.
  
  Thank you
  Josiane

  If that's what you are looking for, then please mark the post as answered and good response.

  Thank you very much

• Required for the installation of Oracle Database 11 g 2 on windows server 2008

  Hello
  
  I'm looking for progressive oracle support, but I am unable to find a note that details install requirements of Oracle 11 g 2 database on 32-bit platform of windows server 2008. Anyone know where to find the requirements? I need so I can prepare the documentation available to migrate our database servers.
  
  Thank you

  Hello

  they can be found in the installation guide: [url http://download.oracle.com/docs/cd/E11882_01/install.112/e10843/reqs.htm#i1011417] requirements Oracle under Windows.

  Herald tiomela
  http://htendam.WordPress.com

• Client Oracle for Oracle database 10g and Windows 2003 operating system...

  Hi all
  I need an Oracle Client for Oracle database 10g and Windows 2003 operating system.
  I searched www.oracle.com it there as much of products so basically that I got confused.
  Could you guide me please?

  Hello

  Here is the link: download (Oracle Database 10g Release 2 (10.2.0.1.0) customer - 10201_client_win32.zip (475,090,051 bytes) (cksum - 946434250)).

  Oracle Database 10g Release 2 (10.2.0.1.0)
  http://www.Oracle.com/technology/software/products/database/Oracle10g/htdocs/10201winsoft.html

  Kind regards
  Hussein

• Need help to install Oracle 10.2.0.5 on Failsafe 3.4.2 on Windows Server 2008 R2 x 64

  Hi all

  I'm trying to build a cluster ON / OFF on Windows Server 2008 R2 x 64 using integrated security. The Oracle DB I install is EE 10.2.0.5.

  I have Oracle 10.2.0.4 and Patch 10.2 . 0.5 so install Oracle, it seems not to be a problem. The problem is with Failsafe.

  I downloaded the version 3.4.2 because with version 4, I can not add 10g (I can't upgrade to 11 or 12) DBs.

  I ask you, is there a good way to build infrastructure because I'm having a LOT of trouble to install everything?

  I have to install Oracle DB using local administrator because my domain account (which has Admin rights) cannot.

  I have to use my domain account to manage the Cluster because the local administrator cannot.

  I am all confused and it does not work everytime I try to add a resource to integrated security.

  So I need something like a short list to understand the correct sequence to install. Something like:

  Step 1: Install Failsafe on both nodes using Local Admin

  Step 2: install Oracle EE on both nodes using Local Admin

  Step 3: Create DB on the first node using Domain Admin

  I hope someone can help!

  Thank you!

  Ok! Found the solution. And of course it was a Windows problem and not Oracle. I just had to go to "Control Panel"-> account-> user account (Yes, 2 times)-> change user account control settings and put the bar you on the left to never notify. Restart the server and here! More no popups for administrator rights!

  You see them all!

• Suspected that the security fix for Windows Server 2008 R2 that affect the ODBC connection.

  I use Windows Server 2008 R2 and have been able to generate the crystal report connection automatically through the (System DSN) ODBC for MS SQL Server 2008 R2.

  When I perform the security updates below, the crystal report would not be able to generate automatically.

  KB2641653

  KB2667402

  KB2665364

  KB2621440

  When I tried to manually generate the crystal report, it prompted me the user DSN instead of the system DSN which I was their use without problems so far.

  Therefore, I created the user and system DSN in the ODBC DSN and so able to invite me for connection (System dsn) but not with the ODBC connection id I created.

  Everyone has experienced problems connecting to ODBC after this hotfix was updated?

  Thank you.

  Hello

  Because you are using a Windows Server, this would be addressed at the address provided below on the Microsoft TechNet Forums

  You can follow the link to your question:
  TechNet - Windows Server Forums

• How do I dual boot windows 7 a physical drive and windows server 2008 R2 to a second drive

  I bought a new 'high-end' and want to leave the current WIndows 7 Home Premium (64 bit), as is.  I want to install a second drive hard and on this new drive, install WIndows Server 2008 R2 so that I can run hyper-v.  I know I have to edit the BCDEDIT, but EVERYWHERE I look for help on this subject, he refers to a virtual hard disk... I don't want to run Server 2008 from a virtual hard disk... but rather a native installation.  Is this possible... If yes HOW?  I know he's probably changed since the days of WIndows 2000 and WIndows 2003.

  Hello
   
  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the following link for assistance:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

   
  I hope this helps.

• Update for Windows Server 2008 R2 x 64 Edition (KB3161608)

  It seems that update for Windows Server 2008 R2 x 64 Edition (KB3161608) caused an error of communication channel protected on OpenManage, anyone else see this today?

  Running Windows 2008 R2

  Servers PE 840 field and a general PE 2900 server

  Remove the two KB3161608 server resolves the problem, but then I have my updated servers to update.

  The next fatal alert: 40. The internal error state is 808 (on my domain name)
  The next fatal alert: 10. The internal error state is 1203. (On general server)

  Dell OpenManage (64-bit) Version 7.4.0 systems management software
  Copyright (C) Dell Inc. 1995-2014. All rights reserved.

  Details

  Version of the Broadcom SNMP Agent 17.6.4

  Common Storage Module Version 4.4.0

  Engine data Version 7.4.0

  Material programming interface Application Version 7.4.0

  Instrumentation Service Version 7.4.0

  Version of the Intel SNMP Agent 1.118.0

  Server Web Apache Tomcat 7.0.39 version

  Oracle Java Runtime Environment Version 1.7.0_21

  Administrator of Server Core files Version 7.4.0 (866)

  OMACS Version 7.4.0

  Instrumentation Service Integration Layer Version 7.4.0

  Instrumentation of the administrator of the server files Version 7.4.0

  The inventory Collector Version 7.4.0

  Storage Management Version 4.4.0

  The Common Framework Version 7.4.0 server administrator

  Logging system Version 7.4.0

  Remote Access Controller managed node Version 7.4.0

  Server SNMP instrumentation, Module Version 7.4.0

  Agent for remote access Version 2.0.0

  Server WMI Instrumentation Module Version 7.4.0

  OSMA 8.3 installation and will be re - install KB3161608

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=TK61C

  General PE 2900 Server

  It seems that this IS THE DIFFICULTY.

  Now test OSMA 8.3 on my domain controller.

  Area PE 840

  It seems that this IS THE DIFFICULTY.

  Make sure that you run Windows Update after restarting the installation KB3161608 Server