Create a title with the Composite Mode

Similar Questions

• HypOpenForm with the composite shapes

  In trying to open the composite shapes using HypOpenForm in Excel, I always get an unknown error 60000.  I suspect it's because that opening the results of composite shapes in a new workbook without connection associated with it.

  Can anyone confirm that hypopenform will not work with the composite shapes?

  Thank you.

  Rick Romanko

  I did a few tests more on it, it seems that there is a limitation preventing the loading of composite forms, BUT you can load hidden forms that are part of this composite form, and you could re-create your form by opening the parts individually.

• Switch Cisco 2960/3560 = > recovery password and default settings with the button Mode

  Hi Experts,

  I have some confusion with the button Mode with cisco 2960/3560 switches.

  I read on many forums and articles, but where things are not clear.

  a place given 3 seconds and somewhere is given 7 or 10 seconds.

  Qus1), what is the exact time to press/hold Mode button to perform two following tasks:

  A. password recovery (according to my knowledge 3 sec) good or bad?

  Configuration of the switch (start + run) would be safe

  After the recovery of password? Yes or no

  B. factory default (according to my knowledge 10 dry) good or bad?

  I'm afraid, because if I press mode button more than 3 seconds, then

  It will delete any configuration of cisco switch. Yes or no

  Qus2) I want to recover the catalyst 2960/3560 switch password without

  Start/run configuration to lose. That is my main concern.

  Please tell me how to do this, what will be the time keeping Mode buttom

  in a few seconds?

  Qus3) which means this line

  "If the password recovery mechanism is disabled in switch

  then you will lose all the config.

  This sentence has been given on this forum url

  https://supportforums.Cisco.com/thread/140848

  KS

  Attach a terminal or PC with terminal emulation (for example, Hyper Terminal) port console switch.

  Use the following terminal settings:

  • Bits per second (baud): 9600

  • Data bits: 8

  • Parity: None

  • Stop bits: 1

  • Flow control: Xon/Xoff

  Note: For more information on the wiring and connection of a terminal to the console port, refer to connecting a Terminal to the Console Port of Catalyst switches.

  Unplug the power cable.

  The power switch and take it to the switch: command prompt:

  2900XL, 3500XL, 2940, 2950, 2960, 2970, 3550, 3560, and 3750 switches of the series, to do this:

  Press and hold the mode button located on the left side of the façade, while you reconnect the power cable from the switch.

  2960, 2970

  Release the Mode button when the SYSTEM LED flashes orange and then turns green. When you release the Mode button, the SYSTEM LED flashes green.

  3560, 3750

  Release the Mode button after about 15 seconds when the SYSTEM LED turns green. When you release the Mode button, the SYSTEM LED flashes green.

  The system was interrupted before the flash at the end file system initialization

  loading the operating system software:

  flash_init

  load_helper

  boot

  switch:

  Run the flash_init command.

  switch: flash_init Initializing Flash... flashfs[0]: 143 files, 4 directories flashfs[0]: 0 orphaned files, 0 orphaned directories flashfs[0]: Total bytes: 3612672 flashfs[0]: Bytes used: 2729472 flashfs[0]: Bytes available: 883200 flashfs[0]: flashfs fsck took 86 seconds ....done Initializing Flash. Boot Sector Filesystem (bs:) installed, fsid: 3 Parameter Block Filesystem (pb:) installed, fsid: 4 switch: !--- This output is from a 2900XL switch. Output from !--- other switches will vary slightly.

  Run the load_helper command.

  switch: load_helper switch:

  Question the dir flash: command.

  Note: Be sure to type a colon ":" after the dir flash.

  Appears in the file system of the switch:

  switch: dir flash: Directory of flash:/ 2    -rwx  1803357                  c3500xl-c3h2s-mz.120-5.WC7.bin !--- This is the current version of software. 4    -rwx  1131                     config.text !--- This is the configuration file. 5    -rwx  109                      info 6    -rwx  389                      env_vars 7    drwx  640                      html 18   -rwx  109                      info.ver 403968 bytes available (3208704 bytes used) switch: !--- This output is from a 3500XL switch. Output from !--- other switches will vary slightly.

  Type rename flash: flash: config.old config.text to rename the configuration file.

  switch: rename flash:config.text flash:config.old switch: !--- The config.text file contains the password !--- definition.

  Issue the boot command to boot the system.

  switch: boot Loading "flash:c3500xl-c3h2s-mz.120-5.WC7.bin"...############################### ################################################################################ ###################################################################### File "flash:c3500xl-c3h2s-mz.120-5.WC7.bin" uncompressed and installed, entry po int: 0x3000 executing... !--- Output suppressed. !--- This output is from a 3500XL switch. Output from other switches !--- will vary slightly.

  Enter "n" at the prompt to abort the initial configuration dialog box.

  --- System Configuration Dialog --- At any point you may enter a question mark '?' for help. Use ctrl-c to abort configuration dialog at any prompt. Default settings are in square brackets '[]'. Continue with configuration dialog? [yes/no]: n !--- Type "n" for no. Press RETURN to get started. !--- Press Return or Enter. Switch> !--- The Switch> prompt is displayed.

  At the switch prompt, type en to enter a mode.

  Switch>en Switch#

  Password recovery

  Type rename flash: config.old flash: config.text to rename the configuration file with its original name.

  Switch#rename flash:config.old flash:config.text Destination filename [config.text] !--- Press Return or Enter. Switch#

  Copy the configuration file in the memory.

  Switch#copy flash:config.text system:running-config Destination filename [running-config]? !--- Press Return or Enter. 1131 bytes copied in 0.760 secs Sw1#

  The configuration file is now reloaded.

  Replace the current passwords that you do not know. Choose a password with at least one capital letter, one number and one special character.

  Note: Replace passwords that are required. You must crush not all passwords listed.

  Sw1# conf t !--- To overwrite existing secret password Sw1(config)#enable secret !--- To overwrite existing enable password Sw1(config)#enable password !--- To overwrite existing vty password Sw1(config)#line vty 0 15 Sw1(config-line)#password Sw1(config-line)#login !--- To overwrite existing console password Sw1(config-line)#line con 0 Sw1(config-line)#password 

  Write the running configuration in the configuration file with the write memory command.

  Sw1#write memory Building configuration... [OK] Sw1#

  For factory reset:

  do not give under the control of factory reset

  Switch#copy flash:config.text system:running-config

  can I copy the running configuration to Flash

  Switch flash running-config #copy:

  Destination file name [running-config]?

  Building configuration...

  [OK]

  Switch #copy running-config startup-config

  Name of destination file [startup-config]?

  Building configuration...

  [OK]

  Review the link for more information below

  http://www.Cisco.com/en/us/products/hw/switches/ps628/products_password_recovery09186a0080094184.shtml

  Please note the useful messages.

  Concerning
  Vesta
  "Everybody is genius." But if you judge a fish by its ability to climb on a tree, he will live his entire life, believing that this is stupid. "

• Problem with the composition of the corporate directory / phone book (E.164)

  Hello

  I have a little problem with the composition of the cucm phonebook integrated telepresence system. I can search the telephone directory, and it displays the user. The format is E.164 number, but with spaces in the number of empty? And for me, it looks like telepresence system trys to deal WITH areas because if I compose without space market. So it seems it is not the phone book to a good number E.164 number.

  any ideas?

  Concerning

  Jason

  Hey Jason,

  Looks like it's still an open caveat on the current software for MX, EX, endpoints series E20 and C sq.

  http://www.Cisco.com/en/us/docs/Telepresence/endpoint/software/TC5/Release_notes/tc_software_release_notes_tc5.PDF

  CSCtz87452:

  MX, EX, E20, C and SX Series endpoints cannot use directories CUCM with numbers, including spaces.

  Thank you, Adam

• Problems with the Tablet mode

  I have problems with the Tablet mode when the display on a shelf. If you visit the Web site on landscape, then everything fits perfectly on the screen however if you view on portrait then it does not. How to solve this?

  You must define a new braking point and design that matches the portrait view.

• Binary translation is incompatible with the long mode on this platform. Windows 7, processor intel core i5

  I install VMware Workstation 12.1.1 Player for Windows 64-bit operating systems on Lenovo intel core i5 Windows 7.

  I have a copy of VM for HP Quality Center with the VirXPSP3.vmx file and the environment.

  When I try to open the Workstation Player vmx file:

  (1) I got prompt that machine virtual seem to be an option to take possession and use

  2) after taking possession, I try to play the virtual machine, I got a prompt with "binary translation is incompatible with the long mode on this platform. Long mod will be disabled in the virtual environment and application requiring long mode does not work correctly as well. See http://vmware.com/info?id=152 for more details. »

  Link is on this page: system required to install an operating system 64-bit on a 32-bit host (1003945) client. VMware KB

  Host is definitely 64 so I'm puzzled with this is the case.

  (3) next step/guest is: "this virtual machine may have been moved or copied. I clicked on the button "I copied it".

  (4) the following message:

  Fatal error VMware Player: (mks)

  Exception 0xc0000005 (access violation) occurred.

  Log file is attached.

  Line 476 in the log file is:

  The following features of VT - x are necessary for the support of VT - x in VMware Player; However, these features are not available on this server:

  2016 06-07 T 13: 51:34.466 - 07:00 | VMX | I125: hostCpuFeatures = 0x217d

  In one of the previous installation, I did virtual Intel technology enabled in the BIOS after one of the responses of your forum. It has not removed the error.

  Just to clarify whenever I have uninstall I'm your site troubleshooting steps:

  (1) Uninstall using Add/Remove program of the program and features

  (2) run the installer with clean / change

  I do above steps as an administrator and restart after each step.

  On top I have delete the following folders:

  C:\Program Files (x 86) folder \Common Files\VMware

  File C:\ProgramData\VMware

  File C:\Users\Ivana\AppData\Local\VMware

  Files C:\Users\Ivana\AppData\Local\CrashDumps\vmware-vmx.exe.*.dmp

  File C:\Users\Ivana\AppData\Local\Temp\vmware-Ivana

  File C:\Users\Ivana\AppData\Roaming\VMware

  And delete the folder with the Virtual Machine for HP Quality Center.

  Do you know how can I fix a fatal error (mks)?

  The same installation works fine on HP with Windows 7, i.e. copy of VM for HP Quality Center is ok.

  Thanks in advance for your help.

  Usually, this is caused by outdated or incompatible graphics drivers on your host.  I expect that the latest drivers for your integrated Intel HD Graphics 4000 would be probably already delivered through Windows Update, however.  Could be interesting to see if there is an optional update in your Windows Update list to get a new graphics driver.

  Otherwise, you can try the problem by disabling 3D graphic acceleration: from the VM menu, select settings..., and then in the list of material , choose display.  Clear (uncheck) the box 3D graphic acceleration .

  I hope this helps!

  --

  Darius

• I created a project with the first 14 and now subscribed elements trial version. However, when I open it there still the band "created with the trial version...". "in the middle of the page. How can I get rid of this?

  I created a project with the first 14 and now subscribed elements trial version. However, when I open it there still the band "created with the trial version...". "in the middle of the page. How can I get rid of this?

  SAMT

  Removal of watermark Adobe Premiere elements 14 test of the project file... Open the project file of 14 trials in 14 items purchased and then first Expert rendered workspaceTimeline Menu/delete the files. Then restore the timeline content.

  You can not remove the watermark from Adobe to an export of the trial even after you bought the product.

  Some of us have found that just opening the project of tryout in removes it from Premiere Elements purchased the Adobe watermark. Determine the way that works for you.

  Please let us know if everything above worked for you.

  Thank you.

  RTA

• Start with the Advanced mode in the Query Panel

  
  JDev ADF BC 11.1.1.5.0

  I have a panel request in my form with table made from view criteria.

  When run, it begins with the basic mode.

  I want that this be changed first immediately advanced mode.

  Is this possible?

  Yes, change the view in the model project criteria. You switch to the indications of the user interface tab and select "Advanced" for "search region mode.

  Timo

• Captivate 8: PDF export created a file with the extension PDF... but it's actually a video. Shouldn't it exported slides as appropriate PDF document?

  In Adobe Captivate, there is a 'PDF export' checkbox when you publish your project.

  He checked the box, and the publication of project created a file with the extension PDF... but it's actually a video. Shouldn't it exported slides as appropriate PDF document?

  No, it was published in an interactive PDF, has always been the case. It's another way to publish the video, that does not need to deploy it to an LMS or a Web server, you can send the PDF file. However, since Flash player is is more integrated in later versions of the Adobe Reader software, the user is to install it.

• How can I create a query with the data control to the web service?

  I need to create a query with the order of web service data, WSDL, it is query operation, there is a message of parameter with possible query criteria and a return message contains the results. I googled but can't find anything on the query with the web service. I can't find a criterion "named" to the data control of web service as normal data control. Blog of Shay, I saw the topics on the update with the data of web service command. How can I create a query with the data control to the web service? Thank you.

  Hello

  This might help

  * 054.     Search form using control data WS ADF and complex of entry types *.

  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/index-101235.html

• How to create two employees with the same name as the vendor record?

  Hi all
  
  We must create a vendor for the employee record, so that we can issue pretty invoice for cash payment. If there are 2 employees with the same name, how can we create records of supplier for these 2 employees? The system does not have the name of the provider in duplicate.
  
  Please notify.
  
  Kind regards
  HY

  Hello

  In R12, it is possible to create 2 employee with the same name but with a different number.
  And it is also possible to create these 2 employees as suppliers in Payables.

  HTH,
  Vik

• A problem with the composite video display mode

  Hello!

  Since this morning, the composite video display mode of my sequences is black with a blue stripes dotted line.

  Each sequence is displayed with the same problem.

  Can you help me please?

  Lily.
  

  Hi Lily,

  Go to the file/project settings/general and change the rendering on "Mercury Playback Engine software only" engine.

  Press OK, you will get a dialog box in which you must select 'Remove Previews'.

  Try these steps and see if it works.

  Kind regards

  Navdeep Pandey

• Error-1074135024 with the sequence mode arbitrary two-channel on SMU-5451

  Hello

  I am trying to use both channels on my SMU-5451 and operate in arbitrary sequence mode.

  In the build step start, I get the error-1074135024:

  Possible reasons:
  Invalid value for the parameter or property.

  Attribute values are not similar in the channels or the specified features. Use a unique channel name or feature name to query the value.

  Unfortunately, I have no idea what parameter or property value causes the error.

  Initially, I tried this with my own VI, and I was able to run each channel individually, but could not get them both to operate simultaneously. As an attempt to troubleshooting Finally, I decided to change the example of arbitrary signals Fgen (Dual Channel) (which worked properly), to see if I could get it to work with arbitrary sequences. I still get the same error. I enclose modified VI, because it is quite a bit simpler than what I'm running.

  I'm under Labview 2012.0.1f3 (32-bit) on a Windows 7 Enterprise (64-bit) operating system.

  Thanks for any help you can offer on how to solve this problem!

  Bill

  So with the help of your VI I have figured out how to make it work.

  First of all, your VI I noticed that I should wire the specific channel, I just want to niFgen Create VI waveform, but not in VI of arbitrary sequence niFgen set up. For this I devrais either do not fill in the entrance of the channel, either entry "0.1". This gets rid of the original error message that prompted this post.

  Your VI works, but it seems to be designed to write on only one channel at a time. However, I noticed that if I run it with all the waveforms channel 0, change the waveforms to be on channel 1 and click load & sequence, waveforms will be correctly output channels 0 and 1.

  Finally, I worked on that the trick is to create an arbitrary sequence, so use the arbitrary Create Sequence niFgen and niFgen configuration arbitrary sequence screw, single-channel waveforms. Then run the niFgen Clear VI arbitrary memory, then create another arbitrary sequence for the other channel. After that, run the generation VI niFgen undertake. And everything works fine! I don't know why it is important to have clear memory arbitrary VI in the Middle, but it seems to be essential for this to work properly.

  I downloaded my VI relatively simple test that works properly with this arrangement.

  Thank you very much for your help.

• Excel, Word, PDF icons and newly created files changed with the page folded with icons instead of appropriate icons.

  Original title: Excel, Word, and PDF icons do not appear I folded the page with icons instead of using appropriate icons - even with newly created files - Microsoft Windows 7!

  I have Windows 7.  I folded the page with icons instead of appropriate icons of Microsoft - even with the newly created files.

  When I change the "open with" to the different program and then select the right product to Microsoft again, it always produces generic folded paper with icons on it instead of the icon to the right for Excel, Word, PowerPoint, etc.  Help!

  Restore your default file types associations...

  http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.html

  Scroll down to exe - executable application files.
  Click on the exe

  Follow the instructions from #1 to #6 in the upper part.

  Scroll to lnk - shortcut link (LNK) files.
  Click on lnk

  Follow the instructions from #1 to #6 in the upper part.

• srvrmgr syntax: How can I create subsystem named with the name and Description of the values?

  Looking through the library, he did discuss are of syntax that allows you to include the value of name and the named value of the Description of a subsystem/Profile Configuration.  In the screenshot, the circled values were created with the server online order Manager.

  

  On the other hand, pouvez create a definition of the element with a name (full name) and a Description.

  For CompDef, it works:
  create the CompDefTest1_enu component definition for the type of component AppObjMgr component fins group run mode interactive full name 'Test Comp Def Test 1' description 'Test 1 CompDef Manager object.

  For named Subsytem, it does NOT work:
  create named subsystem Test5 subsystem EAITransportDataHandlingSubsys full name 'Test 5' description 'Test 5 Description'

  Someone can tell me if there is a good for a named subsystem, syntax to include the name and Description of the values in the command line, or is the only way to create it manually in the UI?

  Hello

  I spent reviewing aid to create the order in srvrmgr, it does not give the full name and description as parameters for the creation of subsystem. However, as you noted these settings are available for creating components definition:

  srvrmgr > help to create

  Create {component group | compgrp}

  [full name: ]

  [{description | desc} ]

  create {definition component: compdef}

  for {component type | comptype}

  {Component group | compgrp}

  run in mode {batch | interactive | background}

  [full name: ]

  [{description | desc} ]

  [with [ param =[, =...]]]

  [[fixparam =[,...]]]

  create the subsystem named for

  subsystem with = [,...]

  Shelf also has an example of creation of subsystem that doesn't include no description, name and first name:

  http://docs.Oracle.com/CD/E14004_01/books/StoreFwdMsg/StoreFwdMsg_InstallConfig14.html#wp1351472

  In this case I suggest that allows you to create a ticket on My Oracle Support to confirm this srvrmgr does not support the creation of a new subsystem with the full name and description settings and request an enhancement for these settings include request in create statement for new subsystems when using srvrmgr.

  It will be useful,

  WSiebel