Create an exit popup when the user closes the site?

Similar Questions

• How can I create a scroll effect when the manuscripts of user to the bottom of the image will be blurred?

  How can I create a scroll effect when the manuscripts of user to the bottom of the image will be blurred?

  Hello

  You can create a scrolling movement where the image fade out the scroll, you must use the tab opacity under the effects of scroll Panel.

  If you need especially be blur on the image, then you must change this image in any editing program like blurry image to make a copy of this image, then place the two images (real and blurry) on this page and use the scrolling motion or fade option to replace the images.

• How to create a new page when the user activates a box?

  I guess this would be a checkbox.  I am looking for a way to create a user, select Create a new page when the user runs out of space in the text box that is given.  So if possible is a way to create a new page with a text box continuous when the user selects create it a new page check box.  Thank you.

  Yes, if you create a new page in the designer of the LC (page 2) and deselect the number of minutes, so that when the form is displayed at the start, it is not an instance of the page. While the click event of the button would be:

  _page2.addInstance(true);
  

  You can design page 2 with which opposes always desired.

  Hope that helps,

  Niall

• mobile site accordion closes but the lower tab is open when the site reopens

  the mobile site of accordion closes but when reopened, the lower tab is open.

  because I used the "can" overlap verified but he pushed permanently to the bottom of the articles below.

  I was told to disable this feature. This solves this problem, but I wonder if it is by the lower tab come open every time the site is reopened.

  Hello

  The tab that is open in Design view in Muse and go open when the site is displayed on the browser.

  Thus, if the lower tab opens in design mode, and the file is downloaded in this way, the lower tab will be opened when the page is loaded.

  Kind regards

  Neha

• How to change existing keywords when the site is not in the bookmarks bar?

  I've implemented several shortcuts keyword for sites that I use frequently. Now, how can I change the keywords or URLS when the site is not in the list of bookmarks? Is there a master file Firefox for these access which can be edited by the user? Or another way to get to them?

  Not sure if it's the same on Mac OS x, but it is how it is done under Windows and Linux versions of Firefox.
  
  Bookmarks > organize bookmarks
  
  Highlight the bookmark in the right pane, and then click more at the bottom to see the keywords and Description fields for this bookmark.

• offline activation code how can I get a when the site getactivated does not work?  MSG: failed to process your request. Please try again later.  Help!

  Activation code offline - how to do when the site: getactivated does not work?  MSG: Failed to process your request. Please try again later.    Help!

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• video HTML is not the same when the site is launched

  I used the code to embede html video I wanted to load on my site, now, when the site is launched, it shows a totally different video that I copied.  Why is this?

  The 2nd (Christmas Turkey |) Pick n Pay) and 4th (Noël Bagatelle, 3-way |) Pick 'n Pay) video on the page appears to load the video Italian hamburgers hidden Center - http://www.youtube.com/watch?v=1Ul9x9PNoCE

  It is probably past that you have the URL of the playlist in their code of integration such as the following, for example:

  Delete the highlighted code and change what follows as you have for the rest of the videos:

  As tested on an iPhone (Safari and Chrome), it seems that mobile browsers don't as the parameter list in the Youtube embed URL for some reason any and overrides the video currently loaded with the first video in the playlist.

  Thank you

  Vinayak

• How to create new Admin id when the current administrator id is corrupted - Vista

  My id admin does not load. Error is the user profile Service service can not... (I forget the rest).  No administrator ID exists so I can connect to my computer with this id, but can't do much except run the existing software.

  Is it possible to bypass the existing admin id permissions to create a new admin user account id?

  I don't know what to do to avoid buying a new computer and start all over again.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  and you don't have to buy a new computer

  If necessary reinstall vista on your computer

• Show the popup when the selection is made on SelectOneChoice

  Hello genius!
  I'm back with another question. = D
  With the help of Jdeveloper 11 g Release 1.
  
  I'm showing a popup when a value is selected on a selectOneChoice component. I tried to use showPopupBehavior, but it looks like you can use that on a selectOneChoice... it works of course if I have a button, but I want to get rid of the button and just show popup when a selection is made on the selectOneChoice.
  
  Suggestions, ideas?

  Hello

  (1) set autoSubmit = true for the SelectOneChoice element, then create a method of valueChangeListener for the selectOneChoice.
  (2) in the valueChangeListener method, the popup can be demonstrated using the examples
  http://www.adftips.com/2010/10/ADF-UI-popuputil-class-to-show-or-hide.html

  Thank you
  Nini

• How to get a popup when the device is plugged into the audio input jack?

  Original title - card Audio HELP

  I have a small problem that should be pretty easy to answer. A quick response would be nice. I'm new on Windows 8, and when you plug a device into the audio jack, a box used for poster asking which device is connected. Now that the box appears when I plug in a device. How do I get it to appear again? I have Windows 8, with player realtek HD audio. More info can be provided.

  Hello

  This problem can occur because of incorrect audio settings. Let's try a few steps to solve this problem.

  Method 1:
  As you use Realtek HD Audio, I would suggest trying the following steps and check if it helps.

  Enable auto-popup
  a. press the Windows key + X, choose Control Panel, select hardware and audio.
  b. scroll and select Realtek HD Audio Manager.
  c. click the icon for folder just above and to the right where it says analog panel back and just below the device's advanced settings.
  d. click Activate dialog popup automatically when the unit is plugged in.
  e. click OK twice.

  f. now, restart the computer and check the issue.

  Method 2:
  If the problem persists, I suggest you to set the headphone or speaker that you connect as a default value, and check if it helps.

  (a) right click on the volume icon in the system tray and then click on "recording devices".

  (b) right click on the space empty in the window pop up and then select "Show disabled devices" and "Show disconnected devices".

  (c) right click on the headset and then click on 'Activate'.

  (d) (d) mettre put out the microphone, then choose "set as default device".

  (e) click apply and Ok.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• file extension created by direct Director when the new project is

  I opened a bunch of clips with WLMM, had to change a bunch of them ("projects") and then they became WLMP files, which I can not download on Facebook... and I can understand how to change the extension.

  I had used Any Video Converter to change the extensions of those I didn't need to edit, but it does not even first the WLMP file.
  I need to be able to publish them to share with the extended family, and the files are too big to email... help!   Thank you

  I opened a bunch of clips with WLMM, had to change a bunch of them ("projects") and then they became WLMP files, which I can not download on Facebook... and I can understand how to change the extension.

  I had used Any Video Converter to change the extensions of those I didn't need to edit, but it does not even first the WLMP file.

  I need to be able to publish them to share with the extended family, and the files are too big to email... help!   Thank you

  =============================================
  WLMP is not a video file... it's a Movie Maker project (only file
  useful in Movie Maker for a re-issue of the purposes). (Think of a WLMP
  file as a "recipe" for a video)

  For downloading and sharing you need save the project in the
  . Film WMV format.

  See the following tutorials:

  How to save the project in Windows Live Movie Maker to WMV Format
  http://www.YouTube.com/watch?v=ZyqZm5MBc7o

  Getting Started Tutorial - Windows Live Movie Maker 2012
  (HOW TO EDIT AND SAVE)
  http://www.YouTube.com/watch?v=N1ZXTEWalCw

  Windows Live Movie Maker 2012: Tips, tricks & Files (save)
  http://www.YouTube.com/watch?v=EvrNrZzoX00

  How do I post videos to Windows Live Movie Maker
  http://www.YouTube.com/watch?v=L5AJk0pBFHc&feature=related
  (Post it on YouTube)

  If the size of your video file .wmv exceeds the limits
  your provider of e-mail... it may be worth trying to download your
  video on a site like the following and send to your recipients the
  Download link:

  "SendSpace.
  http://www.sendspace.com/

  It's very simple on SendSpace site the following...
  the steps are all you need to do.

  On the left, click on the Browse button and it will open a window
  allows you to access the files on your hard drive.

  Navigate to the folder that your video is and select it.

  On the left, click on the download button.

  When the download link appears... left click copy
  button, then click right and paste the link in an email
  message to your recipients.

  Recipients can download the video file as follows.

  On the left, click the link in the e-mail message.

  When the SendSpace site load.

  Scroll down a little and left, click on the blue text *.

  "Click here to start the download from sendspace".

  Save the file to your desktop and view in Windows Media Player.

• When the site opens, popup coming soon

  Hello world

  I need help for my Web site. Whenever I open my a pop index.html of Web site is necessary. I do not know popup is the right word.

  Can someone tell me how to do... Please.

  weblink reference

  Thanks in advance.
  Maury

  HI -.

  There is a 'modal window' opens with success under Firefox and IE8.

  What did you ask?

• formatting different, some changes when the site is opened on another cpu

  I have encounter a problem where some objects and text seem to be formatted differently, moved a little, or in the case of text: Digest where earlier text wraps create overlap with objects placed near the margin. I have this experience trying to work / make changes using two different processors. It happens when two CPU makes changes and some intact elements often change indefinitely except if corrected, if passed in both directions.  I intend only ever download the site from a single processor and carry goods on a USB key. Both processors are Windows, one is 7, the other 8.1. an a desktop dell computer, the other a surface pro 3.

  I'd like to understand how I can work seamlessly between both machines, if possible and appreciate all help.

  The extent possible, that you want to use Web "Web Safe" fonts and not to minimize changes due to differences in fonts on computers/devices.

  "Web Safe" fonts are actually each a list of fonts for the browser to try until it finds an available on computer/device the site visitor. So there will be variations much more large fonts and so heights of line break and text in frame when using "web safe" fonts to Web fonts. When you use a Web font is downloaded to the police with the page and therefore the same font is used on all computers/devices.

• Web forms work when the site is not hosted on Business Catalyst?

  I launched a site Muse this week on AWS and successful web forms the test, and then stopped sending confirmation emails when the DNS was changed.  The form is not error. Emails are not just come through.  Any thoughts?

  AWS does NOT allow unless you have an email as [email protected]

  GoDaddy (that I use for me and my clients) allow Gmail, yahoo, bing, etc. users to receive emails from muse contact forms.

  Hope this helps!

• graphics chips don't appear when the site is powered

  Hello to all of you who know much more than me and thank you in advance for your help.

  I use DW CS (old version) to build a site with a lot of bulleted lists. I created a list style (see below) that uses a graph rather than a circle, square, etc. When I discovered the site locally, the ball / this image, but when I upload the site on the web, does not show the ball.

  Anyone?

  . List {}
  list-style-position: outside;
  list-style-image: url(assets/gr-bul.gif);
  list-style-type: none;
  do-family: Arial, Helvetica, without serif.
  do-size: 11px;
  Color: #333333;
  visibility: visible;

  }

  A URL, this question appears is: http://client.k2vis.com/rc/ under the title "A Unique anti-aging"... ». Below, I have inserted the chart rather used the style of the list.

  Thank you!

  Amy

  The original CSS rule is fine. The path to the chip does not work.

  The prefix it with "/ rc" (him even as you did for the list under "Nutrition for your skin". This list needs restructuring in one

  • list)

    . List {}

    list-style-position: outside;

    list-style-image: url (/rc/assets/gr - bul.gif);

    list-style-type: none;
    do-family: Arial, Helvetica, without serif.
    do-size: 11px;
    Color: #333333;
    visibility: visible;
    }

    Works here.