New router connection problems

Similar Questions

• New router BEFSR41 problems installing...

  I just installed a new version of my BEFSR41.  I had a version 2 and now have a version 4.3.  I have Road Runner internet and had no problem, just pick up my old router and hang a new.  A restart of the modem and I was able to connect to internet and my other 2 computers in the House.  However, I can't access the 192.168.1.1 configuration it won't let me past the password screen.  I tried the default "admin" with no luck.  A reset of the modem will fix this problem without screw it my internet connection and network...

  Also I had installed LELA and when I installed the new router it showed it as a gateway instead of the BEFSR41 router as he showed before.  I reinstalled but still the same bridge description. I uninstalled the program.

  TIA

  Your router must have a username is blank and the password "admin" (without the quotes).

  If this does not work, then the most likely cause for your problem is a problem of computer software firewall.  Go into your computer and temporarily disable your software firewall and see if that allows you to connect to your router.  With some computer software firewall, you will need to "trust" your router at 192.168.1.1

  If you still have problems, read on:

  Here are my tips for to connect you to your router:

  You need not be connected to the Internet to view the router's web pages.  These web pages are built into the router.
  Use Internet Explorer, it usually works.
  JavaScript must be enabled.
  Use a computer that is connected to the router.
  In the non-working computer, temporarily disable your firewall software.

  If you use Zone Alarm, do a right-click on the ZA icon in the taskbar (bottom right of screen) then click on "Shutdown ZoneAlarm" and see if that solves your problem. If this does not work, try the following with Zone Alarm: open the control center ZAISS, go to privacy, then temporarily disable Ad Blocking and Cookie Control and see if it solves your problem.

  If you use Noton Internet Security with the add-on Pack, don't forget to disable the blocker and ad blocker. Some users have reported that they needed to uninstall all Norton Add-on Pack.

  If you can not get anything to 192.168.1.1 then perhaps this is not the address of the router. Go to 'Start' > all programs > Accessories > command prompt.
  A black DOS window will appear. Type "ipconfig" (with no quotes), and press the Enter key. Look at the "default gateway". It is 192.168.1.1? Point your browser to the 'default gateway', can connect you to your router.

  If the above fails, unplug your modem router, then try again. If it solves your problem, then most likely your modem is actually a "modem-router". Check if your "modem" is using the same address as your Linksys router 192.168.1.x space. If this is the case, then the report with this problem and specify also the brand and exact model of your modem number.

  If all above fails them, turn off your entire system, unplug it from the wall, wait a minute, then lights up, then try again.

  If all the above tips fail, then reset the default router: power down the router and unplug all the wires. Wait a minute. Switch on the router, let it fully boot (1-2 minutes), then press and hold the reset for 30 seconds button, then release the button and allow the router to reset and restart (2-3 minutes). Turn off the router. Wait a minute. To connect to a computer, cable, a router's LAN port. Initialize the system. It should work.  Reset the default router will also reset your default Internet connection type.

  If the reset does not fix your system, then you must download and install (or reinstall) the latest firmware for your router. After the update of the firmware, you must reset the default router, and then configure the router again from scratch. If you have saved a router configuration file, DO NOT use it.

• new router connection

  I have a c4780 and using os x 10.9.5, I have a new router and I am unable to connect.  I haved downloaded the easy application of HP wireless and went through the instructions, but I don't see HP-setup in my wireless account.  I tried to turn on my wireless on the printer configuration, I reset the network settings and still do not see the HP installation folder.  This printer is running on one router to another wireless.  I can connect and use all the features via the USB port.

  Hi @eff19

  On the wireless test, you see where it says Radio wireless, Radio wireless operation, Pass and Pass? Or the other of these things say Fail?

  We will need to perform a reset of the printer. A reset should restore the default printer.

  I'll send you a PM (private Message), but before you start, please see the HP Privacy Statement.

  This privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

  There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

  A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

  Reset the printer: what you need to know

  Please, return to the forum and let me know if the problem you are experiencing is resolved.

• Modem router connection problems

  Hi all

  I am replacing a belkin n600 with router linksys ea6350 router. The modem I have is a Motorola Surfboard SB6141. The belkin router connects perfectly to the modem, but when I try to connect the linksys router to the modem, the light on the router keeps blinking and will never get me connected to the internet. I even tried to connect the linksys router to the router belink when the belkin is connected to the modem. I still don't get any kind of service. Thought it was a bad router and it took for my current home to connect to my modem At & t and it worked very well and I was able to put everything in place. For some reason I don't know why the linksys connects very well with the modem at & t, but not the motorla modem and the ISP that I have in my apartment is Comcast. It does not any sense and I'm heading home in a few days and I really need this connected linksys router belkin router is just too slow. Please I need much help getting this linksys router to communicate correctly with the motorola modem. Also, I used both crossover and straight cable modem to see if that makes a difference and does none of this and I know use cross to connect to the router.

  first of all, make sure that the port on your pc is enabled.  usually, if you enable wifi it disables the ethernet port.  before you turn off the modem and do a factory reset on the router into the RED reset button until the lights on the router are flashing.  Turn the power off and wait 10 seconds then plug it back.  During its initialization connect a straight cable between the pc and the router's lan port.  Also, connect a cat5e or cat6 from the wan port on the router to the modem.  wait until the router finishes starting, and if she opens a browser in itself and then open a browser (ie to try) and put 192.168.1.1 in the address bar.  You should get a connection.  Let the empty user and enter "admin" for the password.  Or if it opens the programme of assistance to load the router you can follow if you wish.  This should get you.

• E3000 router connection problem when I use the telphone

  I plugged my router through my telphone line. When I use my telphone, I can't connect my computer to my router. When I see the available wi - fi networks available, my router does not see. As soon as I get off my phone, I can see my router and able to connect. I thought that my router has two bands and I'll be able to use it. I'm not a geek.

  Help, please. Thank you

  Why is your router connected to the phone line?

  It must be connected to a DSL Modem or a Cable Modem (assuming that the release for consumption).

  Need information in order to determine the question.

  Is your wireless phone a DECT 6.0, 2.4 GHz or 5 GHz?

  I changed my DECT 6.0 wireless phone because they do not interfere with wireless 2.4 GHz or 5 GHz. older phones use the same frequency as the network and can interfere.

  Why so your router on a telephone line?

  How often your mobile phone works on?

• Router connection problems

  Hello
  So I'm having a problem, very frustrating to connect to my router. I can't connect to my router using the ip or routerlogin.net address after a certain period of time. If I restart my router, I can connect without any problems, do everything that I do and everything is fine, but it seems that after a while, can I connect my router delay and then I go to the page... I get a "This Page is not available" in Chrome.

  I tested with Chrome, Firefox Safari (on Mac and PC, 2.4 and 5 ghz connection, as well as directly connected to the router). I also tried the same settings on an IBM computer, including using IE

  Internet seems to work very well, (I can even ping the default gateway), but whenever I create a new virtual machine on my test server, I need to assign a static IP address and need to connect and hate that I have to keep rebooting my router must.

  Y at - it a setting or something escapes me?
  Thanks in advance for any help.

  Hi Andy -.

  Hard reset seems to have worked. Thank you!

  For the curious:

  The first thing that happened the router would be looking for another router on the network. Have not found an and proceeded to reset the router to factory specifications.

  Once that came, I restored my previous settings that I saved while I still had access to the router.

  Always curious, he has established for the last month when I tested my olde 3700 (who, by the way, works fine behind a router AT & T in my other House - and a lot more range and speed than the AT & T.)

  -Chuck

• Factory reset wireless router connection problems?

  Hello

  I recently did a factory reset on my HP6745f desktop running Win7 sp1 and I don't know if my problem is with HP or Linksys/Cisco (my router). I already contacted the support Cisco who reported the problem seems to be "a matter of HP, a corrupt driver or other third-party issue" and then offered to help, for a price. I'm hoping to avoid that if possible.

  This office computer is directly connected to the router via an Ethernet cable. Cisco software was that I want to install that 'control' of my router (called Cisco Connect) and when I try to install the software, I get a message saying: "We could not find your router" (that's why the software will not install) - although I am accessing internet through that router. Even if I try to enter my network name and the password, it cannot find anything. I am also unable to access the router via my browser "168.198.1.1".

  I am unable to connect wireless with the same desktop so, my 2 wireless laptops have no problem of connection at all, which leads me to believe it's something specific to my desktop pc.

  The Cisco Connect software has already been installed on my desktop and it worked fine. I guess my question is: someone has any suggestions for me? This could be a driver problem? How can I identify what (s) for 'check '?

  Any help would be greatly appreciated.

  I thought about it! My router can use a "network key" to connect other computers to the router. I guess when I reset my pc all this info has been removed and the router could not communicate.

  I have just created a network key on a flashdrive USB of my laptop, plugged the USB in my office and hop, I reconnected properly. Thanks for the suggestions, I really appreciate the help.

• Pavilion dv4-2160us with Atheros AR9285 and D-Link WBR-2310 wireless router connection problem

  NB sometimes has problem connecting to the router. This occurs when the NP is booted from power, or when the connection of power mode after about a day of economy since his last connected. Although the network sharing Center sees the network to connect to, but shows only "restricted access". But if the power to the router is recycled, then the connection is established. The driver for the Atheros AR9285 is up-to-date. The firmware of the router is the latest v1.05.

  A test ping Google permanently on the NB and a computer that is connected to the router to isolate the problem. Whenever Google is ping successfully, it displays a message and the response time in milliseconds. If the ping fails, the message will be "Ping: transmit failed." General failure. "  It turns out that, while the test on the wired computer worked without a hitch, the NB has shown that at the same time, the internet connection was lost during the time of connection. He then recovered after a few 'pings '. At another time, the internet connection has been lost permanently without recovery, also during the time of connection.

  Anyone has the same problem?

  After changing the security mode WPA2 to WEP router wireless, the problem seems to have disappeared. It's been 3 days and the computer can still make the connection to the router. HP support says that HP wireless network adapter works best with the WEP security setting.

• Router WRT320N to a wired BEFSX41 router connection problem

  Hello, I never thought it would be so difficult. I have problems to connect to a router (WRT320N) so it will be on the same network as my other cable firewall router (BEFSX41). The wireless router works fine because it connects to the internet via the BEFSX41 router. However, the two routers do not see each other and I can't connect two computers, a wired computer, the other laptop wireless to the same network.

  Wired BEFSX41 router uses 192.168.1.1 IP address and the router WRT320N wireless uses 192.168.0.1 IP address.

  Don't know what other information you need. I hope you can solve this problem for me.

  Thank you

  Mike

  For file sharing, it is always better to maintain the network in the same subnet... Connect the BEFSX41 on the Ethernet Port of the router WRT. (LAN-to-LAN connection)... Visit this link for that. If the IP address of the main router is 192.168.1.1 then, change the 2nd router's ip address is 192.168.1.2.

  Make sure that file and printer sharing is enabled... Also, make sure the computer are in the same workgroup...
  Default workgroup in Windows Vista has been renamed to WORKING group. In Windows XP, the default workgroup name is MSHOME...

• New Bluetooth connectivity problems?

  My Droid to always connect to my headset Bluetooth, before downloading 2.1.  Now, it will almost never connect via my bluetooth headset?  I also have a strange icon between the 3 G icon and the Bluetooth icon in the status bar top?  It is an icon of my phone with lines around her that resemble tremors of rating?

  I think that this icon is the icon of 'Vibe' showing is your phone is in the mode of vibe.

• OfficeJet 6600 e-all-in-one: Wireless connectivity with the new router problem

  We had the printer since 12 months, workin with no problems.

  Just got a new modem/router (NETGEAR V7610) installed as part of the NBN implementation and I can't get the printer to connect to the new router. 5 and 2.4 G active networks. The two defined newtorks on security WPA2-PSK [AES].

  The printer detects the wireless (2. 4 g) network, but can't coplete the connection. Tried the two direct input the network key and using WMA.

  -The display panel shows "wireless invalid password (WPA) is entered.

  -The results of network printer test page indicates a FAILURE on safety.

  I was able to connect to multiple other devices (laptop, iphone, Kindle...) without any problem. Used the two direct entry of the key network and WMA.

  Anything else I can try?

  Find a new update of the firmware for the printer (May 9, 2016).

  After you apply the update, the printer is able to connect to the new modem.

• 305 a HP desktop printer: J611 Wireless Desktop HP 305 a series will not connect to new router to talktalk (using Chromebook)

  A new router through Talktalk and since then my printer Wireless does not connect.  It shows on my chromebook as this has already been added as a printer of cloud, but blue light wireless flashes.  Not had any problems before this that he was that we got the new router.  Tired to connect by using the method of the button/PIN button still no joy.

  Please note using Toshiba chromebook on windows/mac.

  Please help as I am ready to scream! Laughing out loud

  Longess

  Hello @longess,

  Welcome to the HP support forums.

  I understand that you have acquired a new router and get your Deskjet 3050 has connected to your new network.

  I would like to help.

  The blue light is flashing on the printer indicates that the wireless radio is on, but the printer is not connected to a network. This is the situation. You have a new router. The printer must be on the network.

  So the next step is to get the printer on the network.

  The deskjet printers family is usually USB wireless setup.

  This causes an obstacle when you use only a Chromebook.

  Chromebook does not support the software needed to turn the printer on the network.

  If you have access to a Windows or Macbook notebook, the following link will help you place the printer on the network.

  Configure the printer to a wireless network for the HP Deskjet 3050 a and 3070 e-all-in-one printer series

  I have something you can try.

  Check out this post from Sunshyn2005.

  Re: Deskjet 3050 does not connect to my wifi network

  If this message does not help to get on the new network printer, you will need to borrow a Mac or Windows computer.

  Good luck

• New router, now unable to connect to Wifi TX

  I had to change my home wireless router; now my Palm TX cannot connect.  The new router key is of type WPA2 instead of WEP... that is the problem?

  All advice appreciated.

  Thank you.

  appeljazz wrote:
  

  Thank you... I went to the link you provided and clicking 'Download' and 'file not found '.  So apparently it is no longer available?

  How does a "change the Protocol from the router to WPA Wireless?  That sounds like it would be worth trying...

  HA

  There are many different routers wireless worldwide, each using different menus and methods to change the encryption.  You must search for the 'Wireless' setting in the router, can find the control area "encryption".  This is where you choose WEP/WPA/WPA2 and the different "flavors" of each.

  Given that the TX is a device only / b, you must be sure that your router is configured to be retro-compatible speeds/b.  If nec ' / g-only ' or ' / g and/n ' it will not communicate to the TX.

  I'll send a link to the ESU you via the private Message system that we have here on the Forum.  It's a shame that HP didn't post the return to download file...

  WyreNut

• laptop older does not connect to new router

  Hello

  I have a laptop Compaq Presario A940NR which is several years old.  Until last week, it was connected through a router.  The router has stopped working on all devices (printer, 2 other laptops).  Replaced with a Netgear N150 router. -connected to a desktop computer, wireless to the printer and 2 new laptops.  Most old laptop listed above does not connect to the network.  I tried (wired) connection directly to the ISP modem via ethernet.  He does not even recognize this connection.  I may need a driver updated, but unable to connect to the internet on the laptop.

  Help! and thank you,

  Hi, Darlene:

  Here are more recent (MARCH 2011) a version of the driver for your Atheros wireless card. I suggest you use it since you have a new router. There was a lot of connection problems with your Atheros card and new Linksys E series routers, for example.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=472276&swItem=ob-91782-1&mode=4&IDX=1

  Paul

• My HP shows it is connected to the new router, but does not connect to the internet. How should I do?

  I have a HP G60 Notebook PC with Windows Vista Home Premium, it is about 4 years old. I recently got a new Cisco Linksys E1500 wireless router, which is connected to my home computer. My laptop shows that it is connected to the home network, but it does not connect to the internet. Other laptops in the House are able to connect to the network and to the internet. Mine seems to be the only one not working do not. Why it is not working? What should I do about it?

  I ran the network diagnostics. It is said "a problem with you network router or modem broadband could prevent an internet connection." I have disconnected these two and tried again. It did not work! I have also connected my laptop directly on the modem and it does not always connect to the internet. I tried to reset the network card. My IP settings are set to automatic.

  My internet connection was not a problem before last week (when I got a new router). What is the problem with my computer? Help, please!

  Hello:

  If you have an Atheros wireless adapter in your PC and you have not updated the driver, I recommend that you install it.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-99392-1&mode=3

  Wireless adapters Atheros with former pilots, dislikes the new Linksys routers.

  If you have an Atheros wireless card, and your wireless driver is more than 2 years, I am very confident that this will solve your connection problem.

  Paul