Create an image gallery full screen with MSO - breaks the other buttons?

Similar Questions

• Freeze YouTube videos in full screen with Firefox, but not other browsers.

  I had a hard time watching YouTube videos in Firefox in recent weeks. Basically, the video does not start and if I keep using small video player it works fine. But if I click on full screen, the video stops for a few seconds, then catch up and repeat this operation until the end of the video. However the sound plays always continuously throughout the video, even though the image is frozen. I don't have this problem in Internet Explorer or Google Chrome, and it only happens on one of the three computers that I use Firefox on. I ran Malwarebytes Anti Malware, Kaspersky Internet Security, and Windows Defender full scans, so I'm fairly certain that it is not malware or a virus that is causing the problem.
  I also tried the following without result: reset Firefox, Firefox run in SafeMode with no addons, reinstalling Firefox (more an another clean reinstall), reinstall Flash player

  I can't understand what is wrong, and Firefox is my favorite browser, so any help would be appreciated.

  Before restarting my OS in safe mode, I checked to see if I still had the problem and now he is gone magically. I did no change at all since yesterday when it was not working properly and now it's fine. Kind of strange. anyway thanks for your help, that's why I love Mozilla so.

• How to return to the view card when an application is in full screen mode without using the Launcher button

  Is it possible to return to the map view when you are using the full screen and more it Launcher button? This will bring this button quick exit!

  Hello and thank you for using the HP webOS Help Forums!

  The Center button is not required to enter the map view. In any position (landscape or portrait) you can slide your finger from the bottom to the top of the page, but just make sure that you start in the black area around the screen. It is a subtle and quick movement and may require some getting used to.

  I hope this helps

• Slide show full-screen with 2 photos

  Hello
  I would like to know how to create a slide show full-screen with two clikable photo inside, as this Web site: http://www.eturaweddings.com
  Thanks for your help

  David

  Hi David

  It would be a bit complicated if you must use a fullscreen, accordion and tooltip, or any other publication inside Accordion widget or you can use different pages to render a similar effect.

  Thus, for example

  -Insert the widget in full screen

  -Insert the Accordion with the width of the page (use the same image that is used for full screen)

  -Insert a ToolTip when the trigger would be half the size of target container and the installation program on the click of the mouse action (you set the trigger and target in the layers panel)

  Sorry, but that would be a workaround, I know a little long.

  Or you can create separate pages where you can use the widget in full screen for different pages using the same images.

  In addition, you can try to use slide shows in the library exchange Muse:

  http://Muse.Adobe.com/exchange

  Thank you

  Sanjit

• Optimize the image to full screen 2D control

  Hi, I'm update programmatically control of 2D image to full screen size.  Is there a way to do this?

  I know that you can maximize the façade to the fulll screen but I have been unable to develop a method which allows me to do that for a 2D image control.

  Thanks for your help!

  You can adapt the 2D image control to the front of your VI by selecting (using right-click) 'Fit Control Panel' and then 'ladder with component object. If you will maximize the VI, control of the 2D image display screen.

• How to add clickcount ominiture in a gallery full screen

  I must add a clickcount in a gallery full screen

  You can try these:

  http://rtfm.MODx.com/extras/Revo/hitspage

  http://StackOverflow.com/questions/27750355/image-gallery-item-counting

  Thank you

  Sanjit

• Why some thumbnails appear dark, although the photo itself is correctly exposed. When enlarged to full screen with the SPACEBAR or open in Photoshop, exposure returns to the correct appearance.

  Why some thumbnails appear dark, although the photo itself is correctly exposed. When enlarged to full screen with the SPACEBAR or open in Photoshop, exposure returns to the correct appearance.

  «Click on the image and click on "clear cache for selection".»

  Try this out and let us know if this helps

• display the image in full screen

  Hi all, I am a newbie for labview. I want to ask you the image display in labview. Now I can display an image in my front panel. I opened the path to the file and display it. First thing I want to do is in other words it is possible to display full-screen monitor not on the façade and the second thing is that how to display images in the folder and show about 2 seconds delay between the two? Pls kindly help me.

  Thank you for the million.

  Hello

  -I don't know if the full display of the image may be possible or not, any reason why you ask this requirement?

  -L' another question on playback of the files in a folder and display for 2 sec can be made as shown in picture.

  -J' joined vi in lv 12 if necessary.

  -Next time, please post your vision research related machine vision Board.

  -

• Problem of Mode full screen with Base of BACK in Windows Vista program

  I have a program from base of BACK, but I can't go full-screen with my BACK Basic program. In order to solve my problem quickly.

  Here is a link to a similar problem with a number of proposed solutions: http://www.askageek.com/2007/12/20/how-to-run-an-old-dos-program-in-full-screen-using-windows-vista/.

  Here is another article to resolve the problem (and note the links to other sites that may also help) from Microsoft:http://support.microsoft.com/default.aspx?scid=kb; EN-US; 926657. I'm not sure I like the idea of using the XP drivers on the Vista system (it seems unfair), but the article comes from Microsoft if...

  Here's another option to run the BACK of the screen maximized in Vista with some possible solutions:http://www.walkernews.net/2007/06/03/how-to-maximize-vista-command-prompt-window/.

  I hope this helps.  Keep me in the loop.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I create a video Viewer full screen?

  You want to create a video Viewer full screen like the one used here: Airbnb (video humanity).

  I want to be able to press a button and for my video to play in full screen

  Thank you

  Ali

  You can use the composition for this, insert video code or widget in jQuery containing: trigger action.

  Video Lightbox (Composition Widget) by Christine Ricks

  Thank you

  Sanjit

• Problem with the new version of the flash player only showes a green background full screen with sound not picture

  New version of the flash player only showes a green background full screen with sound not picture

  'green' stuff usually indicates an outdated graphics driver: http://forums.adobe.com/thread/945765, even though I think that Windows 8.1 should have enough new pilots.  Check anyway.

• Lack of Menu in full screen with Compiz + VMTools

  When Compiz is enabled and VMTools is installed when I full-screen, the Menu at the top is visible until that resizes the window workstation. When this happens, the Menu at the top is grayed out and I can't see the icons and Menu items. When I remove VMTools I have is no longer a problem of menu but I can't use multiple monitors with Compiz active. When I disabled is more to these questions, which seems to be with VMTools.

  I like to keep active Compiz as it has quite a few practical uses rather than some glitter.

  I am running Workstation 6.5.1 build-126130 on OS host 2.6.27 - 11-server. Guest operating system is WIndows XP.

  Ubuntu 8.10 with a 8600GTS Nvidia using TwinView.

  Using the host for display settings, automatic adjustment is activated.

  For the purposes of the screenshot I had to move my Panel down, but even still, the question remains.

  Any help is appreciated.  Please let me know if I can provide further information.

  Hello. Yes, there is actually some problems that can trigger this result, unfortunately. I was just in this and other similar problems last week.

  First of all, I think that if there is only one this monitor on the system, you will not see it. It's probably not a good answer for you, but, I guess.

  Unfortunately, Compiz does not at all favorable to the old things we try to do to get the fullscreen window managers and then stretch that window full-screen with multiple monitors. Metacity and KWin are, however, an option you have is to use Metacity or KWin until this issue is resolved.

  The good news is that now we have an official indication in the EWMH (_NET_WM_FULLSCREEN_MONITORS) (http://snurl.com/dxbi6) specification, things will be much better in the future. The bad news is that right now, there is really nothing you can do to make things better, if you absolutely have to run your current version of Compiz. New versions of the xfwm4 (2.6.0), (not yet published) Metacity, Compiz and KWin (4.2.1) (0.8) now support the WM_FULLSCREEN_MONITORS NETindicator and react much better with VMware Workstation and player, which might also be interesting to try. KWin (from KDE 4.2.1), in particular, carries most of the pleasure of the eyes that you're used to with Compiz and behaves very well with the position of work/drive. Compiz 0.8 is also much better-well-behaved now, although there is a small regression if you use full-screen mode and you want to change the windows, work/drive continues his manoeuvre itself to your new window position (that is, you will need to exit full screen mode if you want to use another application). But at least you'll be able to see your menus. =;)

  I hope this helps?

• Flash, mode full screen with flv

  Hello

  I have a problem that I need to play a site in flash mode full-screen. Which works fine but I have a link where we have a FLV video component. Whenever I look for the link view the FLV video, the video goes full screen and fills the entire screen. I want the FLV file so that it remains at the original video size while I am in full screen. Any suggestions please. Also I have another problem, if I leave the video playback in full screen, and then when I press ESC to get out of the video it to exit full screen, how can I get out the video but not exit full-screen mode.

  BTW, I searched the internet and could not find any example of flash where we flv videos in the website of mode full-screen.

  OK, your starting point is to change the line in the HTML code that says this:

  "scale", "showall"

  to do this:

  "scale", "noscale"

  Then when the movie goes full-screen content retains its original size. In your function full-screen, you would say to full screen, but also have a listener for the event (read about the event here: http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/flash/display/Stage.html#event:f ullScreen ). Once the screen mode full screen, you then get the stage.stageWidth, stage.stageHeight and new provision your items in the positions and sizes you want.

• Bring item full screen after use of the 3D camera and changing point position/orientation

  Hello.  I am a new user of After Effects.

  After you apply the 3D camera and make adjustments and also make adjustments to a position of individual items and the orientation in 3D space.

  is there a way to get one full screen (and directly to the camera) once again, other than doing 'eye '?  Is there a feature or mathematics that will get the item mode full screen

  as if you do not apply 3D or or changes of position?

  Said another way, if I have several parts of the video on screen, turned them all 3D, changed that position and orientation, then applied a 3D camera and adjusted that

  so no items are full-screen one, then you want one of them to return to full screen mode, can add you values of parameters of the element and the camera may be a value

  which translates into a single element to a full screen/straight on angle (as if the 2D and not affected)?

  Thanks in advance for any direction.

  Hey brvid

  The easiest way is to:

  -Start with your image full screen

  -Click on the box for this layer 3D

  -Add a camera (which uses the current view for its zoom/position)

  -Add a null value, click on the 3D box so that the null value

  -parent the camera as NULL. That the null value has the same ISP values as image

  Now, you can duplicate this image and place around the scene in any position and rotation.

  - Then you can copy values ESP of other images as the key your null and the camera images will move to this image and it will be full screen

  Hope this helps,

  Steve

• Full screen video mode, preserving the size of objects

  Hello
  
  My task is to show a video player using the full screen. I have no problem doing that, but I need to perform in such a way that only video scales to full screen while other objects (the player controls) remain unadjusted. If I just go full screen - mode everything onstage is furred naturally.
  
  Playing with the functions of full screen I could come up with the only solution that is to calculate a scale factor (based on, say, stage.width and stageWidth) and adjust the dimensions of the player controls and position accordingly.
  
  Is the best way to preserve the sizes of objects or there is a better technique?
  
  I was hoping that each display object has it's own scene and I could show only video fullscreen by doing something like:
  
  _video.stage.fullScreenSourceRect = screenRectangle;
  _video.stage.displayState = StageDisplayState.FULL_SCREEN;
  
  but he's still developing all objects.
  
  Thanks much for sharing you experience (or sources).

  Hello

  I must apologize for my stupidity in the post in 2008-06-19 12:08:40 (as well as other incidents of my brain dysfunction). I made statements that are not true. For example, I said: "their assumption was that video is the King, and by default to go fullscreen is to resize the video only." It's BS. They don't make this assumption and, in fact, programmers have complete control over the display.

  kglad, you inspired me to look deeper into the hardware acceleration and now I understand better things (or so I hope).

  I do deviate acceleration hardware and all resizing occurs by program.

  My understanding is that when using the Rectangle across the video - he dimensionnera everything that is within the limits of the rectangle. I couldn't find a way to scale just a video using the rectangle. I was hoping that working a line as follows:

  _video.stage.fullScreenSourceRect = screenRectangle;
  _video.stage.displayState = StageDisplayState.FULL_SCREEN;

  He did but in the same way that (note there no _video in scope)

  stage.fullScreenSourceRect = screenRectangle;
  stage.displayState = StageDisplayState.FULL_SCREEN; -which means that everything is scaled up.

  I don't think I fully understand the concept of stage again because in my mind that each object display had it's own step and this step translates the scene of a higher display object (parent). Actually, when I speak of stage - it takes the reference to the highest stage.

  kglad, if you find the time to clarify this point - it would be a huge contribution to humanity :-)

  Back to the description of how I coded full screen WITHOUT using hardware acceleration (in case someone still hope my intellect :-):)

  Step 1. A mechanism that responds to the wish of the user to see the screen full of thing.

  It could be a button with a listener added. The listener will change stage.displayState

  Step 2. Create a mechanism which reacts to changes in displayState.

  a. get System.Capabilities.screenResolutionX and screenResolutionY - these two parameters will tell you how wide and high video possible.

  b. calculate desired video dimensions based on the height and width of resolution and video metadata. This means that one of the ratios will give you scale factor. For example:

  var scaleFactor:Number = Capabilities.screenResolutionY/metaData.info.height will define how it increased (by definition _video.scaleY and scaleX = scaleFactor) using this scale factor newly calculated (assuming you want all the video screen filling).

  c. balance video. Center it if you wish.

  d. hide the objects you want to be shown in the view full screen

  e. visible positions of objects in a desired way. For example, move the player to the bottom of the screen controls calculate x and y, once again, by using parameters screenResolution.

  When the user leaves the mode full screen - reverse what has been done: resize the video at its original size, the positions of origin x and y, see other items, move the Player control to which they belong.

  Fact.

  A brief look at the approach is to enter full screen mode without resize the SWF to the origin. If no further action taken - your player look as it seems at the origin: all the preserved dimensions and swf is the position where there is default (left, Center, or right). And then resize/reposition specifications.

  It will be useful.

  Thanks kglad!