Updates to MS Office and other problems.

Similar Questions

• Windows Update does not start and other problems...

  When I connect to windows update, the page becomes white and everything continues to load.  I can't start in safe mode to run all the patches.  I also have an annoying problem of svchost that takes more than 90% of my memory.  I ran every virus known to man program... MalwareBytes, Kaspersky, ESET, to name a few and they all say that my computer is clean.  I am running windows xp pro service pack 3.

  Hi Bopatop,

  1. did you of recent changes on the computer?

  2. you receive an error message?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click on Start , then run.

  (b) type msconfig , and then click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services , and then click OK.

  (d) when you are prompted, click restart to restart the computer.

  Also, check out the articles below and check if that helps.

  You receive an error message after a Windows XP-based computer runs an automatic update, and you may be unable to run any programs after the closure of the "svchost.exe - Application error" error message dialog box

  http://support.Microsoft.com/kb/927385

  A description of Svchost.exe in Windows XP Professional

  http://support.Microsoft.com/kb/314056

• Can I restore my copies of Office and other software from a Windows XP Backup?

  I did a full backup of my system Windows XP, including MS Office and other software. I upgraded the system to Windows Vista. Can I restore the backup XP MS Office and other software on Vista?  I installed backup-restore of Windows NT on Vista and open the backup file, selected the folders I wanted to restore and begun to restore. The documents have been restored correctly but SW such as the Office was not. SW files have been restored, but they are not "installed" i.e. do not work, I think it's obvious, but I don't know how to install.

  Thank you.

  original title: restore backup XP on Vista

  In this case, you must reinstall the programs, as has already advised it.

  "If you did a clean install, it's different.

  Programs need to be reinstalled from the original media (CD, DVD, etc.). »

  You can not copy programs installed from another hard drive or a backup.

  The only way that works is if it was a picture of complete backup of XP from the operating system installed and you need to reinstall the full XP Image for the program to work again in this OS XP...

  See you soon.

• Update Windows errors and other problems.

  I just installed windows 7 on my computer. The problem is I can't seem to get the updates, I tried all sources (some worked, but did not resolve the full question). Patches some of the sources I'm like, Diagnostics Windows, Microsoft fixit and other software troubleshooting. Here are the two questions I have; 1. I try to check the windows update runs for several hours and then returns to "check updates for your computer. 2 updates show is ready to install on the stop button on the start menu, but not shown in WU. If someone can solve this problem, and I know that research on a certain need of people of this response, thank you.

  Your best solution is going to be a huge part of patience.  WU was extremely slow during the last 6 months.  I got a new facility just a day that lasted 7 hours ago to run.

  If your closing button indicates the exclamation point.  Do a restart and let him finish settle.  Return to Windows Update, then start it.  If you use a laptop, turn off the sleep function.  Go to bed and check in the morning.

• Help on upgrading 10.7.5 El captain in MS Office and other possible issues

  Hello!

  I have a Mac Book Pro December 2011, OS X 10.7.5. I struggled with the implementation of php and many other issues and have been repeatedly invited to improve my OS. As a newbie in CS, I frankly scared - it's the only computer I have, and I can't lose/break/brick/etc, because I won't be able to fix any serious problem at the moment, not until I know what's best. But I'm really tired of losing time because of low productivity, constant freezing and other issues; and also feel ashamed bothers people on forums like this one, only because I have an obsolete system and lack of appropriate knowledge (the latest is not shameful because I learn, but the first can be really annoying for people who help me).

  Please, help me with this question:

  (1) is it safe to upgrade directly to el Captain 10.7.5?

  (2) If Yes on first, what are the possible problems that may arise and what should I do to avoid problems?

  (3) should I reinstall MS Office to upgrade the OS? This is crucial for me because I found out that I have to buy new MS Office, as Microsoft staff informed me. This isn't really the best money for me at the moment.

  Thank you very much for your help and your understanding!

  -First clone your boot existing to another disk drive.

  http://nyacomputing.com/how-to-create-a-bootable-clone-of-your-Mac-hard-drive/

  -Consult the developer of your applications if they will work with El Capitan.  Some may require updates and some may simply not work, and you must buy an upgrade. A MS Office for Mac license will be valid when upgrading to El Capitan, if the version you have is compatible with El Capitan.

  -In EL Capitan Apple strengthened for some hardware will require drivers drivers updated signature. For some hardware updated drivers are not available.

• Satellite L750D - update BIOS 2.1 and its problem

  Hello

  I have little problem. I was downloaded from your website 2.1 BIOS for Toshiba Satellite L750D (PSK32E).

  I have been updating BIOS 2.1 and start the problem with the sound. When I start the game, music or else minutes 2 first sound plays correctly but then it stops without reason. No noise at all. I've been reinstalled op system but the problem is still there.

  Sound works for 2 minutes only then is completely off. Each application to start with sound plays 2 minutes and stop all silent is. I did a probe on my laptop the mother she s a computer portable twin. I have updated bios same problem 2 minutes and then no sound. My OS is win 8 64 pro my laptop mother is with win 7 x 64 premium.

  Two BIOS updated ver 2.1 on L750D and the problem is the same. Please fix the BIOS.

  The BIOS seems to be very old. I was released nearly 1.5 years ago, so to be honest, I doubt that his and BIOS problem.

  I had the similar problem with my other laptop equipped with a Realtek sound card.
  The sound appeared after connection and remove the headphone jack
  But I could solve this latest installation updated audio driver the Realtek driver page.

  But it seems that your Satellite does not support Realtek audio chip but the Conexant audio chip.
  Therefore, the solution could not be useful for you.

  However, I think that you need to update the audio driver. I recommend you google for driver Conexant SmartAudio HD and test the latest version of the driver available.
  On the internet, I find the Conexant SmartAudio HD driver version 8.65.9.51 for Win 7 / 8 Win / Win 8.1
  Not quite sure if this is the latest version, but you can test it.

  To manually update your driver:

  1. go into the Device Manager (right click on my computer, choose manage and then find Device Manager in the left panel)
  2. right click on the device you want to update and choose Update driver software
  3. choose Select the location of the new driver manually and navigate to the folder where you downloaded the driver

• try to download the 6 updates of microsoft office and I get the error code 646

  Here are the 6 updates, I've tried to install:

  Update of security for Microsoft Office Excel 2007 (KB982308)

  Update of security for Microsoft Office Excel 2007 (KB982308)

  Update of security for Microsoft Office PowerPoint 2007 (KB982158)

  Update of security for Microsoft Office Word 2007 (KB982135)

  Update of security for Microsoft Office System 2007 (KB982312)

  Update of security for Microsoft Office System 2007 (KB982331)

  I am getting error 646 with each update of Microsoft office since August of last year...

  First of all, try to disconnect from the internet and see if you can install the updates.

  If this isn't the case-

  try to manually download the same and install.
  You can search the individual updates here:
  http://www.Microsoft.com/downloads/en/default.aspx

  He just put in the KB number and then perform a search.

  If this still creates one problem another thing you can try is disable the User Account Control first download before the update manually. See: (Guided Help: settings to adjust user account control in Windows 7):
  http://support.microsoft.com/kb/975787/en-us.

  How to use User Account Control (UAC) in Windows Vista
  http://support.Microsoft.com/kb/922708

  TaurArian [MVP] 2005-2010 - Update Services

• I need to know how to update my microsoft office and internet explore safely.

  I'm not sure on what are the steps to take when you try to update my windows desktop and are there costs associated with this process. My next question is how can I check if I have the updates for my internet explore.

  http://Windows.Microsoft.com/en-us/Windows7/update-Microsoft-Office

  Microsoft Office Update

  To find updates for the Microsoft Office System, including Word, Outlook, Excel, PowerPoint, and more, go to the Microsoft Update Web site.

  Note

  If you are already using Microsoft Update to get updates for your computer, Windows Update in Control Panel will automatically open and display your update status. For more information see updates: frequently asked questions.

  How many updates cost?

  Updates and software from Microsoft for Microsoft products are free as part of maintenance and support services. For other products, check with each program editor and the manufacturer of the device to see if the updates are free. Depending on your Internet connection, the local telephone charges and long distance standard and/or service charges Internet could apply while you download and install updates from any Publisher or manufacturer.

  TaurArian [MVP] 2005-2010 - Update Services

• Update for microsoft office 2007 installation problems

  I recently bought and downloaded Microsoft Office Ultimate 2007.  I installed the first string of updates without problem, but there are now 8 updates security for programs that I get a Code 646.  It makes me crazy!  They are as follows:

  Update of security for Microsoft Office Excel 2007 (KB969682)
  Update of security for Microsoft Office Publisher 2007 (KB969693)
  Update of security for Microsoft Office Word 2007 (KB969604)
  Update of security for Microsoft PowerPoint 2007 (KB957789)
  Update of security for Microsoft Office 2007 System (KB969559)
  Update of security for Microsoft Office System 2007 (KB969613)
  Update of security for Microsoft Office System 2007 (KB969679)
  Update for Microsoft Office Outlook 2007 (KB969907)

  Someone help me please.

  Hello

  I wanted to include these if necessary - check here for the Experts of the Office

  Office newsgroups
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.Setup&cat=en_us_642d5640-c1ba-43C3-A224-b3ec1473346c&lang=en&CR=us

  And Office Discussion groups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Good luck.
  Rob - bicycle - Mark Twain said it is good.

• Windows writes to the office and other places

  HP ENVY dv75-7200 CTO Quad Edition Notebook PC

  Product #B6B75AV
  8.1 Windows 64-bit

  My original Windows was 8.0.  I have since upgradedto 8.1.  This problem has occurred on both systems.

  Windows will suddenly start writing in my office - and sometimes other places - things like "Desktop.ini" file.

  Files 'System Volume '.  He wrote also sometimes "Homegroup" icon on my desktop - without my permission.

  Maybe you can tell me why this happens and how to address them.

  Don't know much about computers. But I can tell u desktop.ini is a normal file.

  To stop seeing this file:

  1. open your windows folder

  2. click on the view tab

  3. click on the options on the far right

  4. click on the view tab in the folder options window

  5 scroll down until you see "Hide protected operating system files".

  6. ensure that there is a check mark in the box of

  7. you should not be able to see the desktop.ini file.

  For the residential group, I have no idea. It may be related to "recent places". I noticed that when you clear the list of recent locations, recent locations will appear on your desktop and you can not delete.

  Hope this information helps you.

• Drop to the low of lists and other problems after upgrade

  Noticed the problem on http://www.autotrader.com/cars-for-sale/?expandAllOptions=true & Log = 0

  Drop-down lists don't they respond as they did last week - before 36.0.1 update.

  Choose a brand, and then you are supposed to be able to select from a list of models. Is not the case.

  I have several add-ons privacy (see below), but they have not changed with the upgrade (unless they also have been upgraded automatically.)

  FF is becoming less and less pleasant to use as the years go by.

  Hey dblatnik

  Oh my dear, lets get back you on the road again.

  Looks like it's maybe something to do with the interaction of Web sites features. Try updateing your adobe flash and see where that gets you.

  Good luck and let us know how you go
  Brad

• By clicking several times for switching Applications and other problems of Click

  I would like to know when it started, because then maybe I could narrow it down. I have actually some problems, but I strongly suspect that they are related. I do not think that this started immediately when I upgraded to El Capitan, but I can't say when it started.

  1. If I Mail to Safari and I click on Safari to bring it forward, nothing happens. If I click a second time, then Safari comes forward. The problem is not limited to these two requests. Maps, Finder, TextEdit and others do, but it doesn't happen in all cases. For example, if I click on a TextEdit window it before now, but if TextEdit is in front, the other application is not until the second click.

  2. If I double-click a file or application in the Finder, it tries to open the point three times. This usually results in two dialog boxes telling me that the application cannot be opened because the third opens.

  3. I have my user folder and disk in my dock to quickly navigate to a specific folder using the grid. However, when I click on an item in the grid, the icon blinks but nothing happens and the view disappears, won't let me choose something or drilling to the location I wanted.

  What I tried

  A different user account - another user account, all right. It tells me that the problem is at my user account level and not at the level of the system. It's good, almost.

  Connection with the elements of wide opening (SHIFT key is pressed) - This resulted in no change in the above problems.

  Watch the Console - I ran the Console to see if all the messages when problems occurred. Zip fastening. Zilch. Nada.

  What I think

  I am sure that this is a problem with an article by third party due to the fact that it happens to other users on the same computer, but since this is not an element of connection, so I'm stumped on how to refine the problem down to find the cause.

  Does anyone have any suggestions?

  Okay i ' l jump to... Maybe you're more think it is a little. Have you tried another mouse or trackpad, then a reboot before going too far into other possible problems?

• Features of the power manager and other problems associated with the T510

  For the better part of 5 years, I was a happy user of an IBM Z60m and decided it was time to move my z60 to my son and buy a new T510.  Well, I have after several weeks of property I can honestly say I'm irritated and frustrated by several current issues and I'm ready to send back all.

  Starting from the moment I pulled it out of the box I was having problems of power management.  I was on Microsoft help forums, called the lenovo support and spent countless hours on blogs and forums looking for help.   No matter what I do in the put lenovo on arrangements to take away my computer goes to stanby after one minute of inactivity and then wonder my windows password.  After a full day to insert my password my frustration level is off the chart.  I removed the password in the settings of the user who has not helped.  I changed the global settings to disable password in stanby mode which did not help.  I changed the function to optimize power and others, but none of it helped.

  Beyond these problems... I inserted two different discs to insert new programs and my system kept telling me that he did not read either.  I first thought they were zero but my old laptop ibm read without problem.

  So there you have it.

  Are you sure that the system is set the mode after 1 minute?  Or is the screen is locked?

  Try this:

  1. right click on the desktop and choose "Customize".

  2. click on "screen saver" in the lower right corner

  3. uncheck the box that says "On Resume, the logon screen"

  Which solves your problem?

• Signing of documents with certified identification some users get valid message and other problems? Any idea?

  Hello

  Will sign us documents with a certified identification and some users get a valid status then that of other issues. Same type of certifcate KPN Corporate market CSP assuré CA

  any idea?  Thank you

  Natasja

  It seems that some users have the certificate root in their 'approved identities' and others not. You have not specified which version of Acrobat you use but in Acrobat XI right - click signature, select "Show Signature Properties" and click on "Of the see the signatory certificate" button (in versions prior to Acrobat, it's the same thing, just the button is called a bit different, but with the same meaning). Next to view dialog box of the certificate on the left pane which shows the certification path. Select the top certificate of the page, then click on 'Confidence' tab on the right side. That do both in the facilities where you get the status valid and not. I bet where you get valid status the advanced certificate in the chain is approved and where he is unknown, it is not approved. You can directly add the confidence of this dialog box by clicking on the button "Add to approved identities".

• Crash and other problems after update 2015.3

  Hello

  I m do not know if my problem belongs to this topic... I have BIG PROBLEMS with Illustrator CC 2015.3. It crashes all the time! When I want to move the work looks like it belongs somewhere else, some of my work does not show and brushes I created are not there? And even if I saved my work, it is not always saved? The program just hangs by moving and zooming art - advice? :/  I hope I can find help here!... wish that I have never updated...

  [Branched from thread unrelated in After Effects forum - Mod]

  art deco says:

  Thank you! IM really wrong with that... How can I see what I wrote and I always just keep writing to someone else´s thread? :/

  If you use e-mail to reply, you will not see any. If you go to the forum thread (there must be a link in the email to take you directly here), you will be able to see the full conversation.

  A moderator has moved this discussion to the appropriate forum.

  For a good answer, you talk useful people here your hardware (GPU, CPU, RAM, etc.) and which version of the operating system you are using.