Create an installer for an extension without the help of the plugin Manager

Similar Questions

• Creating a key for ssl connection without the clear text password

  I followed the link below to activate the SSL protocol.

  http://www.gemstone.com/docs/HTML/GemFire/6.0.0/SystemAdministratorsGuide/security.6.33.html

  As metnioned on this link, it is risky to specifying the truststorepassword and keystorepassword in plain text. It is advisable to use PKCS, but when I generate a PKCS key, he asks me again for keystorepassword.  For authentication, where I authenticator, it can still work as I can generate key and password that I can later set in:

  Security-cipherpass-filepath

  Security-cipherkey-filepath

  But how to configure SSL communication to use the files encrypted?

  It's your choice how store and protect your security credentials. In the case of ssh, for example, which stores the credentials in a file .ssh in the home folder of the user, the credentials are protected using the appropriate file permissions: private keys must have read and write permissions set for the owner (600) only, and the public key are allowed to be readable by everyone. You can also use the file permissions to protect your credentials instead of encrypt.

  In addition, in GemFire 7.0 all security-* properties can be stored in a separate file, called gfsecurity.properties, which can then be protected using file permissions.

• Error "have sufficient privileges to complete this installation for all users of the machine. "log on as an administrator and try again the installation" when you try to install iTunes

  Original title:

  I just installed windows7, I had to uninstall itunes in order to complete the instalation of windows7. everything went well until I tried to reinstall itunes.

  During this process, I get the message "you don't have sufficient privileges to complete this installation for all users of the machine. log on as an administrator and try this installation again. ». but I am logged on as administrator.

  Hello

  To resolve this problem, use the following methods. After completing the steps in each method, check to see if the issue is resolved before you go to the next method. If the problem is resolved by any method, you do not have to use other methods.

  Method 1:

  Right click on the installer for iTunes and click Run as administrator.

  Method 2:

  Disable user account control settings and check.

  Enable or disable the User Account Control

  Note: User Account Control (UAC) can help prevent your computer from unauthorized changes. UAC notifies you when changes will be made to your computer that require administrator-level permissions. Disabling it can make your compromised computer. Please make sure that enable you UAC, once you have completed troubleshooting.

  Method 3:

  Allow the default Administrator and try to install it in this user account.

  a.Click on Start, click principally made programs, Accessories, right-click on command prompt and select run as administrator.

  b.Type in the following command and press ENTER.

  NET user administrator / active: yes

  c.Log disable the current user account and log in to the user called Administrator account.

  d.Install iTunes in this default Administrator account.

  e.Once of that installation is complete, the default administrator is disconnected.

  f. log in to your user account.

  g.Disable the default Administrator account. Follow these steps.

  i.Click on Start, click principally made programs, Accessories, right-click on command prompt and select run as administrator.

  II. type the following command and press ENTER.

  NET user administrator / active: No.

• try to download the installer for PSE 12 put the program on the new computer.  I click on install for PSE 12 because I have my serial No. & nothing happens!

  I am trying to download the installer for PSE 12 putting the program on my new computer (Windows 7).  I click on install for PSE 12 because I have my serial No. & nothing happens!  Help, please!

  This is the file in the Central column showing to the right of the English, French, German and Japanese in the left column. There is one file to download for all 4 of these language options.

  If you do not see what Travelerjan has demonstrated in his capture of screen above, you may need to try a different browser.

  Guinot

• Extensions of the experience Manager 2.1.2 (Page builder Extension 0.6)

  Have someone worked on Extensions of the experience Manager 2.1.2 (Page builder Extension 0.6) and above all, I'm looking for solutions for these 3 cartridges (more important-> RefinementSelectorEditor)
  
  I changed the pbconfig.xml according to the PBX-lite idea shared by Peter Kim and teammate (a few months in Eden).
  
  
  < = Publisher "publishers: CalendarEditor" >
  < EditorConfig / >
  < / Publisher >
  
  
  < = Publisher "publishers: DataManipulationEditor" >
  < EditorConfig / >
  < / Publisher >
  
  
  < = Publisher "publishers: RefinementSelectorEditor" >
  < EditorConfig / >
  < / Publisher >
  
  
  Problem is when I start Report Builder page (as an experienced Manager call you now), I get these errors for the OpenEditorsText cartridge.
  
  The specified package contained no editors: CalendarEditor
  The specified package contained no editors: DataManipulationEditor
  The specified package contained no editors: RefinementSelectorEditor
  
  
  Thank you
  John

  John P and I were able to get these 3 editors working with the wine sample project that comes with Extensions 2.1.2 Manager experience. These should work out of the box.

  We hit the catch, is that there are several versions of PBX on the host previously for the Sling JCR became corrupted with different config over time/version files. If you want to be sure you have a fresh Sling JCR, you can stop the short tool Service and delete the contents of the Sling directory on disk (on windows, this is in C:\Windows\System32\sling for example. Under linux I believe it is located under the directory of the ENDECA_TOOLS_CONF/State Workbench (I don't have linux version available so can be a directory or both)). When you reinstall the extensions, the appropriate content of the canvas must be created.

  To ensure you have erased the tracks away from the previous config PBX, beyond to remove the Sling directory manually, you can delete the cached Tomcat under ENDECA_TOOLS_CONF/work and also don't forget to clear your browser cache. This should get rid of all old caching configurations and allow you to implement Extensions to the experienced Manager 2.1.2 freshly. It worked for us in these 3 editors getting usable in the experience Manager.

  Published by: Doracle on March 22, 2012 11:37

• BlackBerry Smartphones Desk top manager 4.7 with or without the Media Manager?

  I had wonderful support from some people really nice, but I need to know what version of the DM 4.7 down load? the one with or without the media manager? I should have put that in the other post, sorry.

  Thanks for your help.

  ladyflatfoot49

  Hello

  Please stay in your original thread agreement?

  To fix this one and I'll try to help in the original.

  I know that you're new, it's cool!

  Thank you

  Bifocals

• Need for a solution when the Boot Manager is missing.

  * Original title: startup

  need for a solution when the Boot Manager is missing

  Startup Repair,

  http://www.SevenForums.com/tutorials/681-startup-repair.html

• Changes to the Plugin Manager sections

  Is there a way to change what appears in a section of the Plugin Manager without leaving the Manager Plugin and going back in?

  For example, if I have a field that asks you the username and they enter and click on the button I can reflect this info to aline who say "user name: John Smith. But it seems that I have to close the Plugin Manager and go back before the data put up in the section. So my question is, is it possible to dynamically while the Plugin Manager is still open?

  Thank you!

  Take a look in the section titled SDK "binding the values of the user interface to the data values" beginning on page 78.

• Problem creating bootable installation for El Capitan

  Hello

  When I try to create an installation program for El Capitan bootable on a new MacBook Pro (A1278) in November 2015 using the string SUDO included in

  HT201372: Create a bootable OS x Installer, I get an immediate failure with the answer "sudo: failed to initialize the PAM: no such file or directory." Diskmaker X loops on it and runs into the same answer of the problem.  Is there a solution or the solution to this problem?

  If you do not already have a current backup, please backup all data, and then reinstall the OS. * you don't need to erase the boot volume, and you won't need the backup unless something is wrong. If the system has been upgraded an earlier version of Mac OS X, you may need to the Apple ID and password to use.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  If you installed the runtime Java distributed by Apple, and still need, you will need to reinstall it. It goes the same for Xcode. All other data will be preserved.

  Related support article refers to OS X 10.11 ("El Capitan"), but the procedure is the same for OS X 10.7 ("Lion") and later versions.

• How can I get the installer for my application check the operating system type and then install the correct driver type?

  I have a request that I wrote and have been use and distribute for awhile. The installer I created for this application is an additional installer to install a driver for the USB connection. The USB connection is actually a virtual COM Port. The problem is that the people who drafted modified driver setup the installation program itself. They used to have an installer that would check for 32-bit or 64-bit OS and then install the appropriate driver.

  Now, they have two distinct installation programs: one for the other for 32-bit and 64-bit. They let the user know their OS and install the appropriate driver. I'd rather not have to rely on my users to do. From what I've seen the creater Installer provides that an executable to be run after the application installs.

  Is it possible to have the installer of the application, check the type of OS and then run the correct executable file after installing my application? I think that I could write an Installer 'wrapper' that checks the type of operating system then executes the correct Installer. But I expect a better solution.

  Thank you
  Joe

  So, I make it work!

  The trick is to find a way to determine what type of OS you are using. The method I used was, indeed, read the environment variable. A buddy of mine sent me this link:

  http://StackOverflow.com/questions/2401756/how-to-find-if-the-machine-is-32bit-or-64bit One of the phrases he bibliography the Processor_Architecture environment variable.

  It seemed like a reasonable idea. So I started to research how read LV it environment variables turns out, you do it by reading a registry key. There is an example of LV on how to read a registry key. But I did not know where they are in the registry. So, I searched the Processor_Architecture registry. I found it in HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Session Manager\Environment.

  According to the article in the link, this value will already be x 86 for a 32 bit OS, or something with 64 inside. I just check the response for x 86 string. If it is, I just run the x 86 version of the driver Installer. Otherwise, I run the x 64 version.

  It turned out to be as simple as that.

  I hope this helps someone.

  Joe

• How to search for extension in the Directory Manager

  Hi, I want to create a directory to handler extension research instead of name search, how can I do this? The basic unit book says you can do this, but does not say how.

  If it is not possible, how can I configure the unit to collect the numbers the caller to input and search for the extension and send to the right destination, if it is an invalid extension, it should return to the main message.

  Thank you.

  The Manager directory for searches in name only - if you know the extension you can just dial it in any home.

  You can dial the extension of a user or a Manager in a call handler or the default greeting Subscriber. so the best way to proceed is to simply dial the extension of the opening home - if it is not valid, you will hear the guest of error and then the opening greeting is replayed.

  If you want to use a different Manager for this and want to make sure after dialing invalid extensions that go you to the greeting for this call handler, update the greeting 'mistake' to go to this Manager instead of opening greeting Manager of appeal. By default the greeting of the error is not visible in the SA - you can make visible by using the advanced configuration tool - or you can do it in BulkEdit if you want, there is a special in there option on the greetings to "loop back to itself" page, which will update all managers or subscribers to have their greetings error restart their own welcome message instead of kicking back to the opening greeting.

• How do I repair/recharge the Boot Manager for Win XP without the OEM disks?

  I have an IBM Thinkpad G41 with a configuration dual-boot for awhile. I am donating to the laptop at my church and must remove Linux (don't ask) and make XP installed OS only.
  The problem is that I need rebuild/repair Manager start Windows from the installation of Linux successor whit its own boot manager (Grub).
  I have not the disc XP OS then where can I find the Boot Manager or the files that I need to reload/reconstruction.
  XP fills the primary partition on the HARD drive.
  While I can let it load Linux installed it would be useless to anyone and just takes place.

  Thank you.

  Art

  I have an IBM Thinkpad G41 with a configuration dual-boot for awhile. I am donating to the laptop at my church and must remove Linux (don't ask) and make XP installed OS only.
  The problem is that I need rebuild/repair Manager start Windows from the installation of Linux successor whit its own boot manager (Grub).
  I have not the disc XP OS then where can I find the Boot Manager or the files that I need to reload/reconstruction.
  XP fills the primary partition on the HARD drive.
  While I can let it load Linux installed it would be useless to anyone and just takes place.

  Thank you.

  Art

  Download asw. MBR HERE , save it to your desktop. Open the program. Click 'Fix MBR. " Follow the prompts.

• How to activate permanently on "Show processes for all users" in the Task Manager

  I have a facility with windows 7 installed twice.  will receive run the Task Manager in the initial installation of windows the "show processes from all users" is checked by default and visible.

  However, in the second installation on a spare drive will receive run that task manager this option is converted (boxed) and must be clicked but the machine doesn't remember this setting.

  How can I get windows 7 to continuously show me processes for all users?

  Thank you footoomsh

  Hello

  Are you logged on as ADMINISTRATOR?

  The Task Manager - create a shortcut high
  http://www.SevenForums.com/tutorials/10499-Task-Manager-create-elevated-shortcut.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• installation of the plugin Manager

  I already install the feeder extension in my system and why his watch is not in Photoshop or other programs in the menu windows extension I have to do for this.

  Salvation Jones,

  See a related discussion on the same topic: Re: Extensions CC2015 gone

  I heard the team there are some problems with the Add-ons and the command line tool, and the team is trying to solve. I'll let you know as soon as I have an update.

  See Adobe Exchange for official communication on the extensions Manager.

  Thank you

  Devendra

• is it possible to create a new project exactly similar to the plugin Stamper project found in the acrobat sdk samples

  I want to create a similar to the stamper plugin plugin in Acrobat sdk sample. Or create a menu 'more' point below "annotations Stamper" and when clicked it should paste the text I've defined.

  That's it should work exactly similar to the stamper plugin. I created the menu in the plugin, but not items not to do stamping.  Kindly help. How to on this subject.

  If you want to reproduce the plugin functionality of Stamper, copy the

  Plugin directory, then rename the project. I usually also rename all

  project files (making sure that they are always referenced by the project).

  Rename the name of the plugin and all global resources (for example all the menu items) by

  using your own prefix of developer. To find the items that need to be renamed,

  Search for ADBE in the project.

  This should create a new plug-in with the same functionality.