Create an odbc Connection to query a Filemaker database

Similar Questions

• How to create an ODBC connection to import objects to relational database

  Can you please give me a step by step explanatiuon how create an ODBC connection to import objects to the relational database?

  Hello-

  The path is relative where you store your files for Oracle. It should be similar to something like this:

  .. \oracle\product\11.1.0\db_1\NETWORK\ADMIN

  the 'NETWORK\ADMIN' part should always be the same. If you have difficulties to find, just a Windows Search "tnsnames.

  I hope this helps!

  Kind regards
  Jason

• Using Oracle ODBC connection to a remote Oracle database gateway

  Oracle 11 g 2

  RHEL 6.4

  Someone at - it use the Oracle ODBC gateway to connect to a different Oracle database?  Problems with this configuration?  Where can I get the drivers for Linux ODBC?

  (I know, "why not use a dblink?" -Well that would be against the strategies of enterprise security)

  Thanks for your reply.  What I wanted was 'just' a dblink of 1 db Oracle to another Oracle db w/o the use of the ODBC bridge.

• Create an ODBC/OIC OBIEE server connection.

  Hello

  I look at if there is a way to create an ODBC connection to a remote server in OBIEE or a way to get the data repository by other means (perhaps OIC?). The OBIEE server is on a remote windows computer and I am trying to create an ODBC data source in my windows machine local with the drivers of the instant_client without success.

  Any help is greatly appreciated!

  I found that the problem was the odbc driver that I used. I had to use the one that is installed with the tool Oracle BI Admin of 32 bits (not DB client instant one).

• windows ODBC connection 7.

  I am using windows 7 32 bit. Can anyone help to connect ODBC. When I tried it says the Setup for the microsoft Access dBase ODBC driver routine driver (*.dbf, *.ndx, *.mdx) could not be found please reinstall the driver. In the next message it is said that the specified dsn contains a mismatch of architecture between the driver and the application.

  How to solve this problem?

  Thks.

  kc_k

  Mr. Ramesh K solution in the forum, was good enough to find the solution. I have the same reproduced below.

  In an attempt to create an ODBC connection to Microsoft Access for DxDataBook (using the control panel > system and security > administrative tools > Data Sources (ODBC)), I discovered that the only available driver is SQL Server.

  To install the driver, Microsoft Access (.mdb), you will need to do the following:

  Navigate to C:\Windows\SysWOW64 and double-click odbcad32.exe.

  This will launch the same ODBC data source Administrator window, but it will now all other ODBC drivers available.

  Good bye

  kc_k

• Where download driver SQL Client suitable for the ODBC connection?

  I don't have the 'SQL Client' driver when I create an ODBC connection.   Can someone point me in the right direction to download?

  I tried one that did not work...

  Im running W2K8 64-bit and the connection to SQL 2008.

  Look here. #

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=C6C3E9EF-BA29-4A43-8D69-A2BED18FE73C&displaylang=en

  MCP, VCP

• How to add in the configuration of connection data and ODBC connection

  Hello expert,
  
  on my computor there is an oracle for oracle 10g client. now there are new oracle 11g installed, I want to create an ODBC connection to the new database. but when I create ODBC, I can not find the server for oracle 11g type, there is only a driver for oracle 10g. you please tell me how to create ODBC for this new DB? you please tell me where is the configuration file of source of data on my computor?
  
  Thank you very much

  918440 wrote:
  Hello expert,

  on my computor there is an oracle for oracle 10g client. now there are new oracle 11g installed, I want to create an ODBC connection to the new database. but when I create ODBC, I can not find the server for oracle 11g type, there is only a driver for oracle 10g. you please tell me how to create ODBC for this new DB? you please tell me where is the configuration file of source of data on my computor?

  Thank you very much

  So you have on this machine
  -Oracle 10 g client (only) and in another ORACLE_HOME
  -Oracle 11g RDBMS

  First of all, the 10g client connects fine to the database 11g

  Second, the 11g database includes the base client software, but odbc drivers are not installed by default. You must run YES choose "custom" installation, then select "windows components" in the list of available components.

  I never wanted to install the odbc driver as part of the installation of the database . Only on the remote client installations.

  What are you really will it achieve?

• Installation of the ODBC driver and do an ODBC connection

  Hello
  
  I searched for the 11 GR 2 ODBC driver for windows 32 bit, and I was not able to find it. OTN, I only found up to 10.2 versions. Can someone note me where I can find it?
  
  In any case, I have a database of Oracle 11.2.0.1 on windows server 2003 R2 32 bit ready and two client PCs that need to connect. And I have to make an ODBC connection. Is there a guide on how to create an ODBC connection?
  
  Thanks for the help.

  First of all, you don't have to search for an ODBC driver, you can use the built-in Windows ODBC driver. ....

  In windows, go to control panel > administrative tools > data source (odbc)
  and create the ODBC connection.

  Soon :)
  Renjith Malet

• How DO I create Excel 2007 spreadsheets ODBC connections?

  SAP Crystal reports 2011 and as the sources of data using Excel spreadsheets.

  In Report Designer, you create the connection to the worksheet.

  While this leads to 95% accuracy, there are problems with the tool CR not actually 'SEE' or 'Recognize' values within some excellent cells.

  WHY?  I have no idea.  Apparently, SAP doesn't know either.

  SO an SAP expert has suggested that I use the ODBC connection to Excel 2007 worksheets, i.e. this connection will not have these issues.

  There is a screen in the CR tool where it can be USED? the connection, but I have no knowledge of the procedure to follow.  Apparently, Miss me a step in actually creating

  the ODBC connection so that this CR tool can see it and use it.

  Hello
  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums:
  http://social.msdn.Microsoft.com/forums/en-us/exceldev/threads

• Add Server BI as ODBC connection using free tool

  All,
  
  I am trying to add a native ODBC connection from my PC under Windows XP, the BI server.
  
  I want to use this option to write native SQL against the BI repository and as a source of data of BI Publisher increases it.
  
  We were able to accomplish this using TOAD, but our trial license has expired.
  
  I was hoping that other people might have done this before and help with advice.
  
  We hope to be able to do this with any FREE tool, but more specifically Oracle SQL Developer if possible.
  
  Any ideas appreciated.
  
  Thank you

  Several things here.

  (1) for Server BI of the query editor, you define a jdbc data source in Publisher. You don't need ODBC in the middle. Configure your data source as this:
  Data Source name:< you="" choose,="" "oracle="" bi="" server"="" makes="" sense="">
  Database driver class: oracle.bi.jdbc.AnaJdbcDriver
  Connection string: jdbc:oraclebi://yourbiserver:9703 / (if you have configured your BI server to use different ports can change 9703)
  Click on test connection to make sure you did it right.

  (2) If you still want to set up an ODBC connection (but you must if you configure as above, which is standard), then you create your ODBC DSN as normal (lots of docs on this on the web).

  (3) you can't question a source ODBC using SQL Developer as far as I know. You can use nqcmd or the Client ODBC OBIEE to question it or other tools like Excel. You can also consider Tora, who can question ODBC (enter the DSN "Database") and is free.

• ODBC connection throwing error 'Optional non implemented. "

  Hello world
  
  I tried to get my database adapter Active TIBCO (ADB) to connect properly to my Oracle XE database. I tried different drivers drivers (Oracle 10 g, 11g, and TIBCO/DataDirect 5.3). After some effort, it connects now, but when it works the necessary select query, it throws an error. What he has to do is read a record in the P_TIBCOSRC table and publish. But when he tries to read that it fails. It is the newspaper of the component:
  
  *********************************************************
  * Adapter for ActiveDatabase, 5.4.0.10 Agent TIBCO
  * TIBCO Adapter SDK, 5.5.0.12
  **
  * Copyright TIBCO Software, Inc., 1999-2008.
  * All rights reserved.
  *********************************************************
  Instance ID: ADBTest
  Config name: ADBTest
  Main thread (name: ADBTest)
  
  
  **********************************************************
  Application: ADBTest
  RepoURL: D:\TIBCO\work\AT_adadb_20184.dat
  ConfigURL: / tibco/private/adapt/ADBTest
  Version: 5.4.0.10
  Information: TIBCO adapter for Agent of ActiveDatabase
  ----------------------------------------------------------
  Developed with adapter TIBCO SDK 5.5.0.12
  Copyright TIBCO Software Inc., 1998-2005.
  All rights reserved.
  **********************************************************
  
  + 2008 Nov 14 10:18:41:375 GMT + 1 ADBTest.ADBTest Info [map] AEADB-700059 +.
  + From wire (name: ADBTest.COMM.INTERFACE.1, id: 5296) +.
  +     +
  + 2008 Nov 14 10:18:42:375 GMT + 1 ADBTest.ADBTest Info [map] AEADB-700059 +.
  + From wire (name: ADBTest.DB.INTERFACE.1, id: 5256) +.
  +     +
  + 2008 Nov 14 10:18:42:375 GMT + 1 ADBTest.ADBTest Info [map] AEADB-700059 +.
  + From wire (name: ADBTest.PUB.MANAGER.1, id: 5252) +.
  +     +
  + 2008 Nov 14 10:18:42:375 GMT + 1 ADBTest.ADBTest Info [map] AEADB-700029 +.
  + Publication: (TIBCOSRC / P_TIBCOSRC / TIBCO_TEST_PUB / rv / aeRvMsg / certified / 1 / SURVEY).
  +     +
  + 2008 Nov 14 10:18:42:843 GMT + 1 ADBTest.ADBTest [card] Info AEADB-700012 +.
  + Complete publication cold start. +
  +     +
  + 2008 Nov 14 10:18:43:375 GMT + 1 ADBTest.ADBTest Info [map] AEADB-700029 +.
  + Agent settings: +.
  + ADB + 5.4.0.10
  + 5.5.0.12 + SDK
  + TIBRV 8.1.1 +
  + TIBRVCM + 8.1.1
  + Pilot DB: SQORA32. DLL, 11.01.0006 +
  + DSN: TIBCO +.
  + adb.verbose: it +.
  + adb.debug: 2 +.
  + adb. PollingInterval: 5000 +.
  + adb. PollingBatchSize: 0 +.
  + adb.batchPubStatusUpdates: off +.
  + adb.pubBatchConfirmSize: 0 +.
  + adb.pubBatchConfirmTimeout: 10000 +.
  + adb.publishChildData: it +.
  + adb.useExceptTable: it +.
  + adb.rvMaxQueueSize: 0 +.
  + adb.subBulkInsertSize: 1 +.
  + adb.subBatchCommitSize: 0 +.
  + adb.subBatchCommitTimeout: 10000 +.
  + adb.encoding: ASCII +.
  + adb.perfMon: off +.
  + adb. RetryTotal: 3 +.
  + adb.disconn.code: 3111 3112 3113; 3114 +.
  + adb. SleepBetweenRetries: 10000 +.
  + adb.setEmptyStringNullForRvMsg: off +.
  + adb.useSqlColumns: off +.
  + adb.terminateOnPubFail: off +.
  + adb.rvAdvisoryNoLog: off +.
  + adb.setClientInfo: it +.
  
  +     +
  + 2008 Nov 14 10:18:47:843 GMT + 1 ADBTest.ADBTest Info [map] AEADB-700094 +.
  + Timer polling stations pulled. +
  +     +
  + 2008 Nov 14 10:18:47:984 GMT + 1 ADBTest.ADBTest Info [map] AEADB-700001.
  + Publisher: SQL: SELECT * FROM P_TIBCOSRC WHERE ADB_L_DELIVERY_STATUS = ' no ORDER BY ADB_SEQUENCE +.
  
  +     +
  + 2008 Nov 14 10:18:49:078 GMT + 1 ADBTest.ADBTest error [Database] AEADB-100004 +.
  + DBError: database driver code: HYC00 +.
  + Database server code: 3 +.
  + Driver database message: optional function [Oracle] [ODBC] [Ora] not implemented. +
  +     +
  + 2008 14 Nov ADBTest.ADBTest error [Database] GMT + 1 10:18:49:078 AEADB-930002 +.
  + Publication error. Service publication ADBPublisher with the object of publication TIBCO_TEST_PUB has detected database error: +.
  
  DBError: 5
  Error code: HYC00
  ServerCode: 3
  + Message: [Oracle] [ODBC] [Ora] optional feature not implemented. +
  
  all trying to create publish the event with the P_TIBCOSRC schema. Database is TIBCO. The database is SELECT * FROM P_TIBCOSRC WHERE ADB_L_DELIVERY_STATUS = ' no ORDER BY ADB_SEQUENCE.
  +     +
  Stop ADBTest...
  
  I created an ODBC trace for this and who wrote the following:
  
  AT_adadb_20184 1 dec-21 c 4 ENTER SQLPrepare
  + HSTMT 011C 3268 +.
  + UCHAR * 0X0140FFA0-[3] "SELECT * FROM P_TIBCOSRC WHERE ADB_L_DELIVERY_STATUS = ' NO ORDER BY ADB_SEQUENCE\ 0 +.
  + SDWORD-3 +.
  
  AT_adadb_20184 1 Dec - 21 c 4 OUTPUT SQLPrepare with return code 0 (SQL_SUCCESS)
  + HSTMT 011C 3268 +.
  + UCHAR * 0X0140FFA0-[3] "SELECT * FROM P_TIBCOSRC WHERE ADB_L_DELIVERY_STATUS = ' NO ORDER BY ADB_SEQUENCE\ 0 +.
  + SDWORD-3 +.
  
  AT_adadb_20184 1 dec-21 c 4 ENTER SQLExecute
  + HSTMT 011C 3268 +.
  
  AT_adadb_20184 1 Dec - 21 c 4 SQLExecute EXIT with return code - 1 (SQL_ERROR)
  + HSTMT 011C 3268 +.
  
  + DIAG [HYC00] [Oracle] [ODBC] [Ora] optional feature not implemented. (3) +
  
  AT_adadb_20184 1 dec-21 c 4 ENTER SQLGetDiagRecW
  + SQLSMALLINT 3 +.
  + SQLHANDLE 011C 3268 +.
  + SQLSMALLINT 1 +.
  + SQLWCHAR * 0X09F8AF70 (NYI) +.
  + SQLINTEGER * 0X01B57CA0 +.
  + SQLWCHAR * 0X011C3758 (NYI) +.
  + SQLSMALLINT 1024 +.
  + SQLSMALLINT * 0X09F8AFBA +.
  
  AT_adadb_20184 1 Dec - 21 c 4 SQLGetDiagRecW EXIT with return code 0 (SQL_SUCCESS)
  + SQLSMALLINT 3 +.
  + SQLHANDLE 011C 3268 +.
  + SQLSMALLINT 1 +.
  + SQLWCHAR * 0X09F8AF70 (NYI) +.
  + SQLINTEGER * 0X01B57CA0 (3) +.
  + SQLWCHAR * 0X011C3758 (NYI) +.
  + SQLSMALLINT 1024 +.
  + SQLSMALLINT * 0X09F8AFBA (52) +.
  
  AT_adadb_20184 1 dec-21 c 4 ENTER SQLCancel
  + HSTMT 011C 3268 +.
  
  AT_adadb_20184 1 Dec - 21 c 4 OUTPUT SQLCancel with return code 0 (SQL_SUCCESS)
  + HSTMT 011C 3268 +.
  
  That's all using the 11g ODBC driver (but I have similar connects using the DataDirect driver).
  
  I don't know what I can do. I tried the component with other ODBC connections (to MS Access) and it worked without problem, so I think it has something to do with the Oracle ODBC connection. Does anyone have an idea what could be the problem?
  
  Published by: Deddiekoel on November 14, 2008 11:12

  Looks like you are using an ODBC Oracle driver to connect TIBCO to an Oracle database.
  If this is true, you should post your question on the forum of ODBC:
  ODBC

  This forum deals with connections from an Oracle database in a foreign data store.

• Suspected that the security fix for Windows Server 2008 R2 that affect the ODBC connection.

  I use Windows Server 2008 R2 and have been able to generate the crystal report connection automatically through the (System DSN) ODBC for MS SQL Server 2008 R2.

  When I perform the security updates below, the crystal report would not be able to generate automatically.

  KB2641653

  KB2667402

  KB2665364

  KB2621440

  When I tried to manually generate the crystal report, it prompted me the user DSN instead of the system DSN which I was their use without problems so far.

  Therefore, I created the user and system DSN in the ODBC DSN and so able to invite me for connection (System dsn) but not with the ODBC connection id I created.

  Everyone has experienced problems connecting to ODBC after this hotfix was updated?

  Thank you.

  Hello

  Because you are using a Windows Server, this would be addressed at the address provided below on the Microsoft TechNet Forums

  You can follow the link to your question:
  TechNet - Windows Server Forums

• Report BI publisher with ODBC connection?

  Hi all

  How to secure data when we create a report editor of BI with ODBC connection? How can we limit the display of data for different users or where we can control the data for different users?

  Kind regards
  Sam

  Also - if you have the UserID stored in the database and you can use in sql something like below

  Select * from table

  where user_id_x =: xdo_user_name

  xdo_user_name retrieves the bi publisher user id.

• 11R2 Oracle on Win7 64 bit - 12154 ORA when creating an ODBC

  Hello world

  I have a problem that I can't solve.

  OS: Windows 7-64 bit

  I installed the 64-bit for Oracle11R2 client.

  Because the need for some software that I use the 32-bit version of the client, I also installed the client for 32-bit, under the roof of Oracle, but in another way.

  The path environment variable first contains the path to the 64-bit client, then the path to the 32-bit client.

  Now, I have no problems connecting to all Oracle databases both of sqlplus and SQL Developer.

  But in Control Panel, I can't create an ODBC data source to one of my databases. I get the error message is "ORA 12154 TNS could solve not connect identifier.

  tnsnames.ora and sqlnet.ora are the same for both clients

  SQLNET.ora contains:

  SQLNET. AUTHENTICATION_SERVICES = (NTS)

  NAMES. DIRECTORY_PATH = (TNSNAMES, EZCONNECT, LDAP)

  Any help will be much appreciated.

  Thank you

  Daniela

  
  

  Odbc for 32-bit clients configuration tool is different from the one for 64-bit guests.

  IF THE OPERATING SYSTEM IS 64-BIT

  IF ORACLE 64-BIT CLIENT

  OPEN C:\Windows\System32\odbcad32.exe

  OTHER (customer is 32 - bit)

  OPEN C:\Windows\SysWOW64\odbcad32.exe

  END-IF

  ELSE (os and the client are both 32-bit)

  OPEN C:\Windows\System32\odbcad32.exe

  END-IF

  NOTE: If the configuration of a 64-bit client on a 64 bit OS, or to set up on an operating system 32 bit, the correct odbc administration tool is accessible through the control panel. Only if the configuration of a 32-bit client on a 64 bit OS does manually locate the executable file in C:\Windows\SysWOW64\odbcad32.exe

• Net Vs ODBC connections Manager

  Please can someone help me?
  
  I use version Oracle 11 2 and I installed the instant (using YES) Client on a computer.
  
  I also installed the Manager of Net on the Client and creates a service name to connect to a server. When I press the test button, the connection seems to work okay as a success message is returned.
  
  However, when I create an ODBC DSN using the driver 'instant customer' and press the button test the connection, I get an ORA-12170 TNS: Connect timeout message occurred.
  
  I can do a tnsping and retirns ok.
  
  This may be the cause of odbc not to connect net Manager and AMT ping to do?
  
  My Service name and the name of "Naming Service" are the same (i.e. orcl11).
  
  Is there an odbc setting somewhere that I need to change?
  
  I have the firewall turned off on the client and the server.
  
  Published by: TeeChelt on June 14, 2012 03:42

  You have configured in both houses tnsnames.ora? By default, the houses are unaware of each other, you will need to probably just copy tnsnames.ora to complete customer reception at the home of the Instant Client. Alternatively, make sure at least that they both have the same information in them.

  It will be useful,
  Greg