Create Asm Db using response files

Similar Questions

• Create the HTML using UTL_FILE

  I'll send emails using UTL_MAIL, sending the HTML, I generate dynamically to a cursor and the text with UTL_MAIL sending. SEND_ATTACH_VARCHAR2.
  
  When I get these emails, some periods are missing some very important numbers.
  
  I decided to record this HTML code in my server and then send it using UTL_MAIL. SEND_ATTACH_RAW.
  
  How can I create this HTML using UTL_FILE file and save it to a folder on my server. After you send the message, I would like to delete this file.
  
  I already have my HTML code and just want to save it as a HTML file.

  First create a virtual directory of the Oracle who can access the path specified in your server. Make sure that your procedure have write access to this directory.

  then in your code, you create something like this
  IE - myFileName 'ABCD.html' +.
  myDIR - IE 'YourOracleVirtualDir ' +.

  CREATE OR REPLACE PROCEDURE CREATE_HTML
  (myFileName IN VARCHAR2, myDir IN VARCHAR2) AS

  v_cFile UTL_FILE. TYPE_DE_FICHIER;
  v_cDir VARCHAR2 (30): = myDir.
  v_cExcept EXCEPTION;

  BEGIN

  v_cFile: = UTL_FILE. FOPEN (v_cDir, myFileName, 'W');
  UTL_FILE. PUT(v_cFile,e)'|| Chr (13) | Chr (10));
  UTL_FILE. PUT (v_cFile, "It's your HTML Code" |) Chr (13) | Chr (10));
  UTL_FILE. PUT(v_cFile,e)'|| Chr (13) | Chr (10));
  UTL_FILE. FCLOSE (v_cFile);

  EXCEPTION

  WHILE OTHERS THEN
  UTL_FILE. FCLOSE (v_cFile);
  RAISE_APPLICATION_ERROR (-20010, SQLERRM);

  END;

  to remove the file, you can use

  UTL_FILE. FREMOVE (myDir, myFileName);

  Published by: lie Ching Te on January 20, 2010 07:53

• By using only the keyboard, how can I create an email using Outlook Express, have the files of "painting" in the body of the email

  original title: only the keyboard

  By using only the keyboard, how can I create an email using Outlook Express, have the files of 'paint' in the body of the email, also registered another Web page?

  Hi r. Gull,.

  You can view using Outlook Express keyboard shortcuts, documented in:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/mail_hotkeys.mspx?mfr=true

  I hope this helps.

• Acrobat is not able to create a usable of the returned form because response file form...

  .. .restricts need of operations. Cannot create a response file location: xxx. Form of distribution is abandoned.

  AAAUUUUGGGGHHHH!

  I tried everything I know to make it work.  All I want to do is create a form that a user can open, enter the information, sign it, and then distribute it to others to review and sign.  I looked at the other discussions about this, but I can't read a clear answer as to whether or not this can be done in reality.  It seems that it may be, I can't work.  Any ideas?  Everyone?

  What happens if you apply a signature digital and all the rest do the same?

• response file is not created for silent installation

  Trying to create a response to a silent installation file. From page 15 of the Installation and the Administration of PDF:
  
  Example: ' < location of the Setup file > \setup.exe "/ r /f1" < location of the answer "
  "file > \setup.iss.
  
  Fact that, but no setup.iss after running through the installation. Did a search on the C drive too, but found nothing.
  
  It is for the Developer Version 3.5.1 esp2 PUK.
  
  Our environment is Windows XP Service Pack 2.
  
  Anyone know why the answer file is not created as the directions indicate? Thank you.

  Hi Jason,

  I might have an idea on why it does not work.

  When you run setup.exe you see a menu option which indicates that following:

  Read me (see the Upgrade Guide)
  Read me (see the Setup Guide and Administration
  Installation (installation of the Oracle User Productivity Kit 3.5.1...)

  If so, you need to get out of this configuration. Then in the source (CD-ROM or the location of the installation), browse to the UPKTool folder, there you will see a file named setup.exe, it is the executable that is launched when you click on the button install.

  In any case, to create a response file, you will need to run this setup.exe, so when you run at a command prompt, you should have something like this:

  / F1/r 'D:\UPKTool\Setup.exe' "C:\\setup.iss"

  I mentioned the C drive instead of drive D because I assume that D is a CD-ROM drive otherwise you can place it on any place.

  I hope this helps.

  Kind regards
  Ray

• Responsive HTML5 with mergedprojects, creates a hyperlink to a file in the project html parent to a child html file and it does not work! The child has with the parent TOC, but need to tie. Help, please!

  Hi group!

  I have a brilliant parent project that serves as a springboard for other projects. Users click a component of software they want and are redirected to a page with a list of all the documentation available for this component. Click on the name of a document and access - a lot of PDF files. BUT I also wish they were able to tie the online help for the component. After having read up on the link through / between projects, I knew that I needed to create a parent project (for the page intro and links brilliant) and projects for children (for software components).

  THEN

  I created a parent sensitive HTML5 project and the projects of two children. I compiled the parent to create mergedprojects files, and then open the projects children and collected to the appropriate mergedprojects folder. I then created a hyperlink to the file list html documentation in the project parent towards the child file software component html (output folder and start page [which is the same as the default theme]) and the link does not work! The child and its table of contents appears in the parent TOC so topics are here, but I can't link to them. If necessary, I can send screenshots.

  Where I am dorking this place?

  Thanks in advance for your time and help!

  Scottie 'needs help' gear

  What is your relationship like? And how did you create the link?

  A typical reactive merged help is structured as follows:

  index.htm (Master home page)

  mergedProjects

  childName

  index.htm (starting page for child)

  A child from the index.htm page link would look like this:... /... index.htm

  Kind regards

  Willam

• Get the 500 error trying to create a table using the REST API

  Hello

  I tried to create a table using the REST API for Business Intelligence Cloud, but I got 500 Internal Server Error for a while now.

  Here are the details that I use to create a table.

  

  and the json to create the schema that I use is

  [{'Nullable': [false], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [18], 'columnName': ["ROWID"]}]

  , {'Nullable': [true], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [18], 'columnName': ['RELATIONID']},

  {'Nullable': [true], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [18], 'columnName': ['ID']}

  , {'Nullable': [true], 'defaultValue': 'dataType' [null],: ['TIMESTAMP'], 'precision': [0], 'length': [0], 'columnName': ['RESPONDEDDATE']},

  {'Nullable': [true], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [255], 'columnName': ['RESPONSE']},

  {'Nullable': [false], 'defaultValue': 'dataType' [null],: ['TIMESTAMP'], 'precision': [0], 'length': [0], 'columnName': ['SYS_CREATEDDATE']},

  {'Nullable': [false], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [18], 'columnName': ['SYS_CREATEDBYID']},

  {'Nullable': [false], 'defaultValue': 'dataType' [null],: ['TIMESTAMP'], 'precision': [0], 'length': [0], 'columnName': ['SYS_LASTMODIFIEDDATE']},

  {'Nullable': [false], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [18], 'columnName': ['SYS_LASTMODIFIEDBYID']},

  {'Nullable': [false], 'defaultValue': 'dataType' [null],: ['TIMESTAMP'], 'precision': [0], 'length': [0], 'columnName': ['SYS_SYSTEMMODSTAMP']},

  {'Nullable': [false], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [10], 'columnName': ['SYS_ISDELETED']},

  [{'Nullable': [true], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [50], 'columnName': ['TYPE']}]

  I tried this using postman and code, but I always get the following response error:

  Error 500 - Internal server error

  Of RFC 2068 Hypertext Transfer Protocol - HTTP/1.1: 10.5.1 500 internal Server Error The server encountered an unexpected condition which prevented him from meeting the demand.

  I am able to 'get' existing table schemas, delete the tables, but I'm not able to make put them and post operations. Can someone help me to identify the problem, if there is no fault in my approach.

  Thank you

  Romaric

  I managed to create a table successfully using the API - the only thing I see in your JSON which is different from mine is that you have square brackets around your values JSON where I have not. Here is my CURL request and extract my JSON file (named createtable.txt in the same directory as my CURL executable):

  curl u [email protected]: password UPDATED h x ' X-ID-TENANT-NAME: tenantname ' h ' Content-Type: application/json '-binary data @createtable.txt https://businessintell-tenantname.analytics.us2.oraclecloud.com/dataload/v1/tables/TABLE_TO_CREATE k

  [

  {

  'columnName': 'ID',

  'dataType': 'DECIMAL ',.

  'Length': 20,.

  "accuracy": 0.

  'Nullable': false

  },

  {

  'columnName': 'NAME',

  'dataType': 'VARCHAR ',.

  'Length': 20,.

  "accuracy": 0.

  'Nullable': true

  },

  {

  "columnName': 'STATUS."

  'dataType': 'VARCHAR ',.

  'Length': 20,.

  "accuracy": 0.

  'Nullable': true

  },

  {

  "columnName': 'CREATED_DATE."

  'dataType': 'TIMESTAMP '.

  'Length': 20,.

  "accuracy": 0.

  'Nullable': true

  },

  {

  'columnName': 'UPDATED_DATE ',.

  'dataType': 'TIMESTAMP '.

  'Length': 20,.

  "accuracy": 0.

  'Nullable': true

  }

  ]

• Adding a device to ASM disk using asmtool

  Hello

  I create ASM disks.

  Background: Oracle enterprise linux 6. I'd partition the shared disks (SCSi) during the installation of Linux (don't know what to do, I just did).

  Now if I run oracleasm createdisk, it is said that the devices are busy. No, I removed the mounts of the devices in/etc/fstab. Now createdisk said that "the device is not a partition. Now I use asmtool command instead:

  / usr/sbin/asmtool - c-l/dev/oracleasm n OCRVOTE s/dev/sdc - a force = yes

  That works fine, but I need to add more then one device to drive OCRVOTE. If I do

  / usr/sbin/asmtool - c-l/dev/oracleasm n OCRVOTE s/dev/sdd - force = yes

  It is said: asmtool: unable to create 'OCRVOTE' ASM disk: file exists

  Hello

  You're basically labelling records at the level of the BONE.

  This name must be unique.

  You must give the label name different labelling while.

  / usr/sbin/asmtool - c-l/dev/oracleasm - n OCRVOTE1 s/dev/SDS - a force = yes

  Then use ASM diskgroup in the future.

  Kind regards

  Loriette

• How Config Network Service by script? for example the response file

  I created a batch for DB creation using DBCA silent.

  I want to add a script to create also the Networking Service after.

  I was told that it can be done with the answer file.

  Is a response file script also which can be run after the DBCA scripts?

  Where can I find a manual with the available commands so I can produce what I need?

  On the internet, I don't find as silent examples of the DB instalation.

  EDIT

  Operating system is Windows 7 Oracle 11.2.0.1

  I want to create the Network Service that will add these lines to the tsnames.ora.

  DBNAME =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = wsName) (PORT = 1521))

  (CONNECT_DATA =

  (SERVICE_NAME = dbname)

  )

  )

  on the client and the server.
  How can I automatically via a batch script, to add it to the DBCA scripts after creation?

  I was told once to atopic that this could be done via a response file.

  I provided the Correct found answer on this subject since then.

  The 1st solution to set up a NetService via a custom command script, adding the data you need as if it was a BAD IDEA.

  1. you can not guranaty the correct paths if you plan the planting in an API with a lot of end users.

  2. the 1st time, you set up a network service, it must be set to cause netca (network Assistant) 1st the tnsnames.ora is not exiswt at all.

  THE OFFICIAL is to run from a shell in silent mode netca and feed it with values from a response file, either online as parameters

  I copy paste the solution I wrote on a separate thread

  https://forums.Oracle.com/thread/2559659

  The scenario is to set up a typical network Service without using the interface graphics, but instantly with a command from the shell.

  Scenario took place on Oracle 11.2 g on Windows 7

  Level of Description: Noob

  1. you can open of Network Setup Wizard, of the hull directly by entering its name "netca.

  Info: netca is an actaully of batch file calling several "elements". Located in the \bin folder of the directory of Instalation Oracle (Client and server time)

  the patrh of the \bin folder, where is the netca is included in the widnows PATH environment variable. So when you enter netca there and run it.
             https://en.Wikipedia.org/wiki/path _ (variable)

  ATTENTION: If you have the path of the directory before the path of the Client Server, the server netca will run instead

  2. on a typical NetService we re Protocol, host, Port, DatabaseName and the name of the service itself to identify it.

  -Silent option along a response file gives the possibility of is not interact at all with the GUI as all values will be filled with the answer file that will point us

  3. you can find an example of response file to the ORACLE_HOME\inventory\response\ called netca.rsp. It contains all the possible parameters, you can pass, so that you can choose that you need.

  For our scenario, the final answer file will look like this.

  [oracle.net.ca]

  INSTALL_TYPE = ""custom"

  NAMING_METHODS = {"TNSNAMES"}

  NSN_NUMBER = 1

  NSN_NAMES = {'DBNAME'}

  NSN_SERVICE = {'testII"}

  NSN_PROTOCOLS = {'TCP; PCNAME; 1521 "}

  So now you simply enter netca responsefile option along the pat of the answer file with the silent command to power entry

  NETCA/Silent /responsefile /C:\oracle\product\11.2.0\dbhome_1\inventory\response\mynetca.rsp

  So simple

• How to automate the process of loading data using load file &amp; Task Scheduler

  Hello
  
  I do the automated processes to load the data into Hyperion Planning application using the file data_Load.bat & Scheduler of tasks.
  
  I created Data_Load.bat file, but the rest of the process, I cannot complete.
  
  Could help you me, how to automate the process of loading data using the file Data_load.bat & task Scheduler or what are the rest of the file is require it to achieve.
  
  Thank you

  In response to your question using the maxl for loading scripts?

  If Yes, I've seen and deliver in the batch (ex: load_data.bat) that is you do not have the path of the maxl script complete with a batch when passing through the event the task scheduler will work, but the log file and / or error will not be created. Which means lots claims it linked task scheduler, although he did not do what you need to.

  If you use maxl use this as the batch

  "essmsh C:\data\DataLoad.mxl" or you can also use the full path for the maxl or work elsewhere. The only reason why I think that the maxl can then not work is if you do not have the updated batch updated to call on all LANE changes maxl or if you need to update your environment variables to correct the command essmsh to work in a command prompt.

• RAC ASM database and system files in the standby mode

  I have a database of ASM the knot two of the CARS and want to create a physical file system standby active database. This is supported by oracle? and you can share tips? Thank you

  I hope that's what you're looking for... See the below links

  http://pythianpang.WordPress.com/2009/07/07/Data-Guard-ASM-primary-to-filesystem-physical-standby-using-RMAN-duplicate/
  http://indiandba.blogspot.com/2011/03/create-physical-standby-on-normal-file.html

  Kind regards
  http://www.oracleracexpert.com
  RMAN Oracle 11 g new features
  http://www.oracleracexpert.com/2011/12/Oracle-recovery-managerrman-new.html
  Understand the Oracle RMAN Reporting
  http://www.oracleracexpert.com/2011/06/understand-Oracle-RMAN-reporting.html

• I do my job to the computer on a MAC computer. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open t

  I do my job to the computer on a MAC book PRO. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open the document. My problem is the document does not show the icon, but rather the document is already open. I spoke with 2 Apple. 'Experts' care and can help me. Can someone tell me what to do?

  It's a question of how the recipients e-mail programs deal with attachments. Many e-mail programs will open all the files they can handle, including files jpg and PDF, by default, and if the recipient has not changed that there is nothing you can do about it. The only solution is to the compress first, then it will be delivered as an attachment, allowing the recipient to decompress and open it.

• Boot Camp supports only Windows 7 or later installation on that platform. Please use a file ISO of Windows 7 or later installation.

  Hello

  I tried to fix this for hours, I hope someone can help me.

  I downloaded the ISO "Win10_1607_English_x64.iso" (4.29 GB) file and with him came a "info.plist" (2 KB), so they are both on my 64 GB USB Drive (format: MS-DOS (FAT32)) called 'WINSTALL '.

  I have the ISO on the USB key, and it is selected as the ISO image in Boot Camp. I also have the USB the disk of destination selected, and yet I get this error:

  Your bootable USB key could not be created

  Boot Camp supports only Windows 7 or later installation on that platform. Please use a file ISO of Windows 7 or later installation.

  I'm currently under OS X El Capitan Version 10.11.6 on my iMac (21.5 inch, end 2012) that is compatible with Windows 10.

  If anyone can help me I honestly love so much, I tried contacting Apple Support staff by phone, they said that they can't do anything, I tried to contact their Live Chat, but none of this has helped to solve the problem, and I tried to look online, but can't find too much.

  Thanks in advance for any answer!

  What OSX Version do you have? This site gives the requirements of Bootcamp: minimum system requirements to install Windows on your Mac with Boot Camp - Apple Support. And you did an upgrade? Could it be that the upgrade will not correctly for the OS?

  Looking at the 10 Windows version you downloaded, is the update of birthday, which was released less than a month ago. It could be that Apple is not reconisgin the Windows version when reading the disk, because it is too recent. I don't know if you have access to the download of the previous generation and do a Windows update?

• allow to create or write a PDM file with labview 2014

  Hello

  I need help. I'm new with LabView. I tried to create a PDM file, but it does not work. My code in the link below is really simple, but I don't know what the problem is. My code doesn't throw any errors so I don't know what to look for in the internet. Once my code is excuting, no file is created. I use LabView 2014 and my laptoop has windows 7 on it.  My question is, in all I need to do whenever I create a new VI of specific configurations that will be play/create/write a .tdms so that my code may work correctly because the writing in a .txt file works perfectly.

  Thank you and sorry for my English

  Hi bmtanguay,

  you want to run your VI on your cRIO9074?

  Where do you think your cRIO creates this file? A cRIO is a clean computer - and it has its own 'hard drive '. This is where your file is created: C partion on your cRIO!

  You cannot create a file on your Windows pc from a VI running on your cRIO!

• When you try to run an .exe file, windows will appear with a warning saying I don't have permission to use the file... and yet I used it earlier that day and no changes have been made on the computer

  I'm a gamer, I play world of Warcraft. A week ago, the shortcut of this game that was created through disk began to have a popup alert indicating * Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.* thing is, it was working fine a few weeks ago and no changes to the computer or the security settings. So I created a shortcut using the .exe directly instead of that the game gives us. Now yesterday I've played, got off, went to practice, returned, and it was blocked. There are no other files (that I know) have this problem, it's the unique. I am running vista Home Premium service pack 2 of the of the window on a relatively new dell 32-bit processor. I have absolutely no idea as to what caused this... anyone have an idea? Thank you.

  Justanotheridiot,
  If you uninstall Norton, you can reinstall and your subscription will remain current.  Just make sure that you are using the Norton removal tool to uninstall.  You can find on their Web site.  You also mentioned McAfee on your system.  If you have not used the removal tool they provide that I suggest to go to get it and run it before removing Norton.  I heard about problems caused by one of these programs being not entirely removed by using only the normal uninstall option.

  Also if you have not already done, right click on the file that you run and choose "Run as Administrator" and see if that makes a difference. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.