Create ConstraintEnumeration for a rhino script attribute

Similar Questions

• Create InheritanceRelation or Hierarchi rhino script

  Hello

  I need to create an InheritanceRelation or Hierarchi with a rhino script, but I can't do it. I try with entity.setHierarchicalParentID () and model.createInheritanceRelation () and no work. How can I do?

  Thank you.

  Hello

  I have in my model entities p1, ch1, ch2 and ch3 and here is the code (no check for null in the code you can add):

  p1 = model.getEntitySet().getByName("p1");
  ch1 = model.getEntitySet().getByName("ch1");
  ch2 = model.getEntitySet().getByName("ch2");
  ch3 = model.getEntitySet().getByName("ch3");
  ch1.setHierarchicalParent(p1);
  ch2.setHierarchicalParent(ch1);
  ch3.setHierarchicalParent(ch2);
  

  Philippe

• How to create queues for JMS using Scripts

  Hi all
  
  I want to create the JMS queue in weblogic server 8.1 running scripts.
  Can someone give me scripts and how to run the scripts...
  
  I have the WLshell scripts to create the JNDI and JMS queues, but I don't know how to run the scripts.
  Please help me on the same.
  
  Thank you
  Amandine

  http://eDOCS.BEA.com/WLS/docs91/config_scripting/using_WLST.html#1078952

• create bookmarks for the front and the back of the cover

  Go easy on me please I tried for two hours to do this simple thing! (At least, I assume it's simple).

  I try to add bookmarks to the front and the back of the cover of documents. The coverage is obviously the first page (always!) but the rear hull could be any page number, according to the document. Curiously, I did a before work for the calculation of the last page and this isn't my problem.

  In any case, of hackering autour with stuff in the javascript reference and some tutorial, I so far have this:

  var plan = this.bookmarkRoot;

  myRoot.createChild ({cName: "Front Cover", nIndex: 0});

  myRoot.createChild ({cName: "Back Cover", nIndex: 99});

  Thus, this creates two bookmarks where I need them, 'Coverage' at the beginning and the 'cover' at the end of the bookmarks already in the doc. Obviously this works only because the number of 'already' bookmarks will never exceed 99, but it seems to work ok!

  In any case, my problem is that I can't work a way to set the destination - for the life of me I'm sorry I read the docs, but my experience is limited I think it's almost impenetrable. I think that this should be simple, because the cover should always point to page 0 (in a zero index) and I'm not only bothered about 'back' because I can reuse the code because I have to work on the number of the last page. So if someone could help me by telling me how to set the 'cover' down on the first page (0) when you click on - I can go to bed at a decent hour!

  When you create a bookmark using a script you can define its action to a script, you can use something like that to the front page:

  myRoot.createChild ({cName: "Front Cover", nIndex: 0, cExpr: "this.pageNum = 0 ;"});})

  Moreover, instead of using '99', use this code to always create the bookmark back cover as the last of the list:

  myRoot.createChild ({cName: "Back Cover", nIndex: myRoot.children.length});

• Alternative TOAD to create ddl for open-ended statements. of objects

  Hi friends,
  What I usually face, it is the obligation to create instructions for some clues, some tables, some synonyms in a schema.
  Manually get the script from the TOAD for each object is an enormous task and involves a lot of time.
  
  
  =========
  For example in a schema TESTSCHEM I tables below:
  TAB1
  TAB2
  TAB 3
  TAB4
  TAB5
  
  and the index below:
  
  IND1_X
  IND2_X
  IND3_Y
  IND4_D
  IND5_M
  
  and below synonyms:
  
  SYN1
  SYN2
  SYN3
  SYN4
  SYN5
  =========
  
  
  and I want to get the DDL of:
  TAB1
  TAB4
  TAB5
  
  IND2_X
  IND3_Y
  IND4_D
  
  SYN4
  SYN5
  
  
  Note: I need the exactly the same kind of scripts that TOAD makes for me. For example a table declaration will all create table, index, synonym, subsidies drawn here.
  
  Can anyone suggest some dynamic queries/views that will help me to get the "true TOAD-LIKE" scripts.
  
  
  No guidance for the scripts of TYPE TOAD will be a great help.
  
  Thank you
  Kunwar.

  Discover the DBMS_METADATA package for your version to the http://tahiti.oracle.com

• How to create folders for my received emails iCloud on an iPad?

  How to create folders for received emails on an iPad Air iCloud?

  In the mailbox display, press the "Edit" button, then "New mailbox", type a name, choose a location and then "Save".

• iOS 9.2 causing lag in Logitech Create keyboard for iPad Pro

  iOS 9.2 has considerably weakened the Logitech Create keyboard for iPad Pro performance. He had been immediately sensitive - one of the best features that the combo made feel like a laptop. With 9.2 key strokes are interrupted at left and right, and there is a noticeable shift in the key that appears on the screen. Very, very frustrating. I seen it referred to in this thread:

  Re: Pro iPad smart keyboard shortcuts stop working

  And I saw a mention on Twitter too. What is going on? Did someone talked with Logitech?

  I'm having the same problem. After that 9.2 updated Logitech Keyboard create on my iPad Pro is essentially unusable because I'll have to go back and difficulty both dropped by strikes, rearranged, letters, etc. There is also a noticeable delay when I type when the characters appear on the screen where before it was instant. Must be something software related because it was just after the 9.2 update he started to arrive.

• create masks for marked particles

  Hello world

  I'm trying to creat masks for each marked by IMAQ label.vi particles. I did use IMAQ labeltoroi, get the return on investment for each particle, and do IMAQ roitomask 2. However, the images of these masks are related images. Do you know how creat masks in the coordination of the original image?

  Best,

  Doogie

  I think that the lable particle simply sets the value of each BLOB in a class to an integer it is IE 1,2,3,4 for 4 groups, (I have LV here right now so it's memory).  You can just itterate through the lable values and use the image to compare or beach threshold function to make masks where you keep the pixels that are equal to this value.  What will a new image with only the PIX = 1 where the value is equal to the value labled, it will have the same size and shape as the original image of lable.

• A way to create folders for custom message for e-mail on the Touchpad POP account?

  Is there a way to create folders for POP e-mail on the touchpad accounts? I can't work with each message limited to my Inbox or in the trash!

  Yes, aggravating circumstances.  But it is not possible AFAIK.  There may be a solution of homebrew, but I didn't go down the road of homebrew.

• DAQmx (Version 9.1) Create Channel for accelerometer will NOT convert m/s ^ 2

  I use DAQmx create channels for accelerometer to get results in the unit (m/s ^ 2)

  It worked until DAQmx Version 8.9.

  Now, I tested it with DAQmxVersion 9.1 and the results are in g (not converted to m/s ^ 2!)

  I use wth .vi DAQmx Create Channel (I-acceleration-accelerometer) entries

  units = m/s ^ 2

  sensitivity units = V/g (there is no sensitivity unit V /(m/s^2) available)

  sensitivity sensitivity value in V/g =

  I have read the data with

  . VI DAQmx reading (analog 2D DBL NChan NSamp)

  In DAQmx<= 8.9="" the="" double="" numbers="" are ="" correct="" converted="" to="">

  but in DAQmx 9.1 not (values are in g and low by 9.81)

  My solution is the following change

  units = g

  sensitivity units = V/g

  sensitivity = sensitivity value in V /(m/s^2)

  Then the double numbers are not converted, but m/s ^ 2.

  And this work in all versions of DAQmx.

  The problem is:

  An older program that uses the settings of the first and tested with DAQmx<=8.9 will="" get="" wrong="" measurement="" result="" with="" daqmx="" 9.1="" and="" no="" error="">

  Peter

  Hi Peter,.

  I'm not in my office at the moment and I can't try it by myself, I have forwarded your request to one of my colleagues, I hope he will contact you soon.

  Sorry for the delay,

  Tobias

  The language of MAX settings depend on the regional settings of your Windows operating system. See the following page:

  http://digital.NI.com/public.nsf/allkb/9893C1767C93D20E86256F49001CDA92

  Kind regards

  Tobias

• failed to create value for the message Analyzer "at line 54.

  I get the following error, can someone please?

  failed to create value for the message Analyzer "at line 54.

  Hi ejpeppjep,

  Check if this article helps you fix the problem: http://support.microsoft.com/kb/823768

  If the problem persists, we recommend that you try the following steps and check the result.
  Step 1: a. Click Start, click Run, type cmd and click ok.
  b. at the command prompt, type sfc/scannow and press ENTER.
  c. once the analysis is complete, restart the computer and check if the problem persists.

  Note: You will be asked to insert the Windows XP disk, if a file is missing.

  For more information, see Description of Windows XP System File Checker (Sfc.exe)

  Step 2: If the problem persists, restore the computer to an earlier time
  see How to restore Windows XP to a previous state .

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why creates shortcuts for Moving files when drag and drop the folder or file in another folder?

  I am using Windows XP SP3, just before I drag and drop the file into another folder in my windows explore. Suddenly, he is creating shortcuts for moving file. I'm not able to move the file by drag / move the mouse, it is possible that by cutting and Paste(Ctrl+X) using the keyboard. Why?

  Maybe your 'Alt' key is stuck.
  See exchanging the keyboard with another makes all the difference.

  HTH,
  JW

• Is there a songsmith creative commons license link so that I can use created songs for YouTube videos monetized Songsmith?

  Is there a songsmith creative commons license link so that I can use created songs for YouTube videos monetized Songsmith?

  original title: songsmith creative commons license

  Hello

  The question you have posted is related to Songsmith and would be better suited to the Songsmith community. Please visit the below mentioned link to find a community that will offer in support of your request:

  http://social.Microsoft.com/forums/en-us/songsmith

• I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script. Cannot install the Manager of mobile broadband services.

  could not access vb run time for custom action script

  I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script.  Cannot install the Manager of mobile broadband services.  Any ideas?

  Hello

  I suggest you run the fixit and see if it helps:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also check out this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/error-2738-could-not-access-VBScript-run-time-for/1a4499ae-8bc1-4534-9c6f-4d399ac70d9a

  It will be useful.

• Best practices to create diagrams for mounting of the EMP

  Hi all

  What is advised to create patterns for EMP installation and configuration if you use Oracle for EMP data.

  1. create the dedicated tablespace and table Temp space dedicated for each schema

  or

  2. create a dedicate tablespace and dedicates space temporary table for all schemas and another separate for HFM schema.

  or

  3. just use default tablespace and a tablespace temp.

  Kind regards

  Dattatray Mate

  It's like I said products like FM, FDMEE, DRM and perhaps RAF depending on what happens to be stored should be considered for there own tablespace, other products, not so and can be combined in say a tablespace.

  These are all just guidelines and there is no good answer.

  See you soon

  John