Similar Questions

• For loop creates 1 d data table

  Hello, I am building the circuit below, and I'm running into a lot of problems with the loop, creating a table 1 d of data from certain types of data such as the ERROR OUT and the VISA NAME of RESOURCE. I understand why it does this, but I only need the last value in the table (the value of the last iteration of the loop for). This is true for me for the error, resource name of visa, and I was thinking of using the Boolean value that indicates when the for loop.

  Is there a simple way to extract the last value in the table 1-D so that it is correct to pass along trails, VISA and ERROR type?

  You actually create a block diagram, not a circuit.  A circuit is an electrical system including devices and wires.

  If you right-click on the tunnel and choose disable indexing, then you get the value of the last iteration rather than a 1 d table.

  I recommend you watch the LabVIEW tutorials online
  LabVIEW Introduction course - 3 hours
  LabVIEW Introduction course - 6 hours

• Why I can't create indexes on the table of RDF data

  When I tried to create indexes on the table of RDF data, it always say the table or view does not exist. I created the RDF model using java codes:

  Oracle Oracle = new Oracle ("jdbc:oracle:thin:@localhost:1521:orcl", "system", "123");

  Chart GraphOracleSem = new GraphOracleSem (oracle, "test2");

  
  

  And used the following commands in sqlplus to create indexes:

  SQL >

  SELECT THE SEPARATE OWNER, OBJECT_NAME

  FROM DBA_OBJECTS

  WHERE TYPE_OBJET = 'TABLE '.

  4. AND OBJECT_NAME like ' % TEST2;

  OWNER

  --------------------------------------------------------------------------------

  OBJECT_NAME

  --------------------------------------------------------------------------------

  SYSTEM

  TEST2_NS

  SYSTEM

  RDFB_TEST2

  SYSTEM

  TEST2_TPL

  OWNER

  --------------------------------------------------------------------------------

  OBJECT_NAME

  --------------------------------------------------------------------------------

  SYSTEM

  RDFC_TEST2

  
  

  SQL > connect as sysdba

  Enter the password:

  Connected.

  SQL >

  SQL >

  SQL > select * from TEST2_TPL;

  Select * from TEST2_TPL

  *

  ERROR on line 1:

  ORA-00942: table or view does not exist

  SQL > CREATE INDEX test2_sub_idx ON TEST2_TPL (triple. GET_SUBJECT());

  CREATE INDEX test2_sub_idx ON TEST2_TPL (triple. GET_SUBJECT())

  *

  ERROR on line 1:

  ORA-00942: table or view does not exist

  Hi Shifu,

  It is not recommended to use the SYS or SYSTEM to store/manage schema graph RDF data.

  Can you please try the following in a SQL * more terminal?

  SQL > conn system/eu1

  Connected.

  SQL >

  SQL >

  SQL > create user graphuser identified by graphuser;

  Created by the user.

  SQL > grant connect, resources, unlimited tablespace to graphuser;

  Grant succeeded.

  SQL > conn graphuser/graphuser

  Connected.

  SQL > create table graph_tpl (triple sdo_rdf_triple_s) compress;

  Table created.

  SQL > sem_apis.create_sem_model exec ('graphic', 'graph_tpl', 'three');

  PL/SQL procedure successfully completed.

  SQL > insert into graph_tpl values (sdo_rdf_triple_s ('graph', '', '', ''));

  1 line of creation.

  SQL > select count (1) in the mdsys.rdfm_graph;

  1

  You see the same result?

  Thank you

  Zhe Wu

• Firefox asked a "refresh", computer locked up before finished, created a "old data FireFox file on the desktop.

  Firefox asked a 'refresh', I pressed the button refresh and process running, computer then locked up to complete before. He has created a "old data file FireFox" on the desktop. I need to understand how trasfer the data in the old file of data in my FureFox 'new' to allow me to access my bookmarks and other. Thank you!

  Hi Ken, Firefox will not start now, complaining that it cannot find its profile, or it starts up, but data are incomplete?

  Here is a procedure to return to your prior to refresh the data. It takes 5 minutes, but it's probably faster than the recovery of individual data files and those in a new profile from loading.

  Check inside the folder 'Old data Firefox' update adds on your desktop in a folder with a name random semi. If there is only one, that probably has your old settings and Add-ons. If there is more than one, you'll want to work with one who has been updated recently.

  Once you have identified the profile folder, that you want to restore, here is my "old profile resurrection suggested procedure:

  Overview

  Here are the steps described in more detail below:

  1. Create a new Firefox profile
  2. Delete all of this profile folder
  3. Copy in all of the old profile folder

  Create a new profile for Firefox (Windows)

  Out of Firefox and start in the Profile Manager by pasting the following text in the search box of the start menu, or the start > Run dialog box and pressing ENTER:

  firefox.exe -P
  

  Note: any time want to switch profiles, exit Firefox and return to this dialog box.

  Click on the button create a profile, give it a name like OldSettings and skip the option to change the location of the folder. Select the new profile from the dialog box, and then start Firefox.

  Open the new profile folder in Windows Explorer

  Firefox in the new profile should look like a new installation of the plant. Open the troubleshooting information page by using either:

  • button "3-bar" menu > "?" button > troubleshooting information
  • Menu help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table, click on the view file"" button. Firefox will launch your new profile folder in Windows Explorer.

  This folder open, switch back to Firefox and get out by using either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Firefox is closed, the profile folder must be front and Center, or you can activate it by using the taskbar.

  Copy old data instead of new

  In this new profile folder you just popped open - NOT the one on your desktop - select all content (you can use Ctrl + a) and delete (you can press Delete on the keyboard).

  Leave this window open, open or switch to your folder of old data of Firefox. Consult your old profile folder. At this level, you should see a folder named bookmarkbackups among other things.

  Select all (Ctrl + a) and copy (or right-click > copy or Ctrl + c).

  Switch to the empty profile folder in another window and paste (or right-click > paste or Ctrl + v). This may take a few minutes because some files are large.

  Launch Firefox

  Firefox should start in this 'new' profile with the old resurrected profile data. Success?

• Tables 1 d registering on .lvm to create the 2D file table

  Hi all

  I know it is probably trivial and shouldn't take too long to sort. For some reason I can't get out.

  I have a loop of producer who creates a 1 d table every second and sends it to a consumer who must then save this line in a file LVM. I can do what I want by creating the 2D table prior to registration and then crush each time, however, I would like it scaling in trials that will have millions of data points so I'd rather not have the 2D being added to table.

  How do I get it so the LVM record 1 line, can actually enter the presses and saves the next line etc. I used exactly the same format on the express VI I've seen work on other projects though, it doesn't seem to work here.

  I enclose the code, it saves the data vertically currently but I wish it were horizontal by iteration.

  Using LV2013 to do.

  Thank you very much.
  Pete

  Just format the data yourself and save it in the folder.  Open/create the file before your consumer loop, write inside and close after the loop.

• ORA-31693: Data Table object 'AWSTEMPUSER '. "' TEMPMANUALMAPRPT_273 ' failed to load/unload and being ignored because of the error:

  Dear all,

  OS - Windows server 2012 R2

  version - 11.2.0.1.0

  Server: production server

  ORA-31693: Data Table object 'AWSTEMPUSER '. "' TEMPMANUALMAPRPT_273 ' failed to load/unload and being ignored because of the error:

  ORA-02354: Error exporting/importing data

  ORA-00942: table or view does not exist

  When taken expdp and faced error mentioned above. but expdp completed successfully with waring as below.

  Work "AWSCOMMONMASTER". "" FULLEXPJOB26SEP15_053001 "finished with 6 errors at 09:30:54

  (1) what is the error

  (2) is there any problem in the dump because file as above of the error. If Yes, then I'll resume expdp.

  Please suggest me. Thanks in advance

  Hello

  I suspect that what has happened, is that demand has dropped a temporary table to during the time that you run the export - consider this series of events

  (1) temp table created by application

  (2) start expdp work - including this table

  (3) the extracted table metadata

  (4) the application deletes the table

  (5) expdp is trying to retrieve data from the table - and gets the above error.

  Just to confirm with the enforcement team that the table is just a temporary thing - it certainly seems it name.

  See you soon,.

  Rich

• ORA-19504: cannot create the file '+ DATA '.

  Hello everyone.

  This is the scenario:

  We have a test server that is used to restore daily backups of the Production database. Restore us the database with the same SID as the production one.

  For specific reasons, we need create a second database (with a different SID) on this server with an older backup from the production one. To realize that I'm trying to use a part of the "DUPLICATE without connection to the target" tutorials on the web.

  I tried the simple guide that I found which is:

  (1) copy the backup files cold /somedirectory

  (2) start OLD database with nomount

  (3) connect RMAN with OLDER as an auxiliary

  (4) run the following: DUPLICATE DATABASE FOR OLD BACKUP LOCATION ' / somedirectory' NOFILENAMECHECK.

  Here's the result (I deleted some lines because of the size of it):

  ----------------------

  RMAN > ProdDB to OlderDB DUPLICATE DATABASE

  2 > LOCATION of BACKUP "/ home/oracle/OlderBackupFiles.

  3 > NOFILENAMECHECK.

  4 >

  From October 1, 14 Db double

  content of Script memory:

  {

  clone of SQL 'alter system set control_files =

  "+DATA/OlderDB/controlfile/current.829.859839217" comment =

  ' Set by RMAN "scope = spfile;

  clone of SQL 'alter system set = db_name

  "ProdDB" comment =

  ' Modified by RMAN duplicate "scope = spfile;

  clone of SQL 'alter system set db_unique_name =

  "OlderDB" comment =

  ' Modified by RMAN duplicate "scope = spfile;

  clone to stop immediately;

  Start clone force nomount

  Restore controlfile primary clone of ' / home/oracle/OlderDB/controlfile_ProdDB_20141001_4159.bkp';

  change the clone database mount;

  }

  execution of Script memory

  SQL statement: alter system set control_files = comment "+DATA/OlderDB/controlfile/current.829.859839217" = "defined by RMAN" scope = spfile

  SQL statement: change the system db_name set = comment "ProdDB" = "modified by RMAN duplicate" scope = spfile

  SQL statement: alter system set db_unique_name = comment "OlderDB" = "modified by RMAN duplicate" scope = spfile

  (...)

  From restoration to 1 October 14

  allocated channel: ORA_AUX_DISK_1

  channel ORA_AUX_DISK_1: SID = 191 type device = DISK

  channel ORA_AUX_DISK_1: restore the control file

  channel ORA_AUX_DISK_1: restoration complete, duration: 00:00:03

  output file name=+DATA/OlderDB/controlfile/current.829.859839217

  Restoration finished in October 1, 14

  mounted database

  output channel: ORA_AUX_DISK_1

  allocated channel: ORA_AUX_DISK_1

  channel ORA_AUX_DISK_1: SID = 191 type device = DISK

  content of Script memory:

  {

  until the SNA 274262921.

  the value of newname for datafile clone 1 again;

  the value of newname for datafile clone 2 again.

  the value of newname for datafile clone 3 again.

  the value of newname for datafile clone 4 new ones;

  the value of newname for datafile clone 5 again.

  the value of newname for datafile clone 6 again.

  the value of newname for datafile clone 7 again.

  restoration

  database clone;

  }

  (...)

  From restoration to 1 October 14

  using the ORA_AUX_DISK_1 channel

  channel ORA_AUX_DISK_1: from the restore backup set data file

  channel ORA_AUX_DISK_1: specifying datafile (s) to restore from backup set

  channel ORA_AUX_DISK_1: restore datafile 00001 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00002 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00003 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00004 in + DATA

  channel ORA_AUX_DISK_1: restore datafile 00005 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00006 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00007 to + DATA

  channel ORA_AUX_DISK_1: reading from the backup /home/oracle/OlderDB/database_ProdDB_20141001_4157.bkp piece

  channel ORA_AUX_DISK_1: ORA-19870: error when restoring the backup /home/oracle/OlderDB/database_ProdDB_20141001_4157.bkp piece

  ORA-19504: cannot create the file '+ DATA '.

  ORA-17502: ksfdcre:4 cannot create the file + DATA

  ORA-15041: diskgroup space 'DATA' exhausted

  switch to the previous backup

  Oracle instance started

  (...)

  content of Script memory:

  {

  clone of SQL 'alter system set = db_name

  "OlderDB" comment =

  ' Restore the original value by RMAN "scope = spfile;

  clone of SQL 'alter system reset db_unique_name scope = spfile;

  clone to stop immediately;

  }

  execution of Script memory

  Errors in the script of the memory

  RMAN-03015: an error has occurred in the script stored memory Script

  RMAN-06136: the auxiliary database ORACLE error: ORA-01507: database not mounted

  ORA-06512: at "SYS." "X$ DBMS_RCVMAN ', line 13466

  ORA-06512: at line 1

  RMAN-05556: not all data files have backups can be recovered on SNA 274262921

  RMAN-03015: an error has occurred in the script stored memory Script

  RMAN-06026: some targets not found - abandonment of restoration

  RMAN-06023: no backup or copy of the file 4 found to restore

  RMAN-06023: no backup or copy of datafile 3 found to restore

  RMAN-06023: no backup or copy of datafile 2 found to restore

  RMAN-06023: no backup or copy of datafile 1 found to restore

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the command duplicate Db at 15:39:11 01/10/2014

  RMAN-05501: abandonment of duplicate target database

  Complete recovery manager.

  ------------------------------------------------------------------

  The first mistake of the stack was ORA-19504 while trying to restore the backup of the database.

  First thing I took a glance was ASM occupation but it enough available space.

  The second was a permission problem, but it doesn't seem to be the case because RMAN can correctly write the controlfile to ASM.

  One have some advice on what I should look for?

  Thanks in advance sorry for my English.

  Select this option.

  Hello.

  Thanks, but is not the case. As I have said, that the DATA diskgroup has space enough he uses only a single disk in a RAID.

  But I solved my problem... To the auxiliary database, I added the following to the spfile:

  DB_FILE_NAME_CONVERT = '+ DATA/ProdDB', '+ DATA/OlderDB ".

  LOG_FILE_NAME_CONVERT = '+ DATA/ProdDB', '+ DATA/OlderDB ".

  I don't know why, but with these two clauses, it worked well. Perhaps RMAN was trying to restore it to the wrong place?

• How can I reapply style to data in a data table Spry HTML CSS?

  Hello.  I have Adobe CS6 installed on my computer and am new to the use of Adobe.  This is my first post.  To learn Dreamweaver, I read the book Adobe Dreamweaver CS6 Classroom in a Book.  I now do the Lesson 13 and will have trouble to do the part up to step 21 on page 342.  I have a Spry data table in two ranks, but he lost the CSS style applied in Lesson 7.  I can't reapply.  For example, the title was drawn on pages 194 and 195 using the legend of table content section.  To try to apply a new style, I chose the title, but did not see the style in the drop of class in the property inspector.  Otherwise, I control-click on the style in the CSS Styles Panel, apply in the context menu has been grayed out.  The following two sections of the Lesson 13, HTML data update and work with XML data seem to work very well however.  The second data table Spry to two rows, using XML data, has all the CSS styles.  The first table used in HTML, the file calendar.html (XHTML)data.  I couldn't find a table called calendar.html in the folder of resources 07 lesson (step 1 on page 184).  There is another difference between HTML and XML tables.  When the XML table has been transformed into a Spry data set, it lost the ID created in Lesson 9.  By following the instructions in step 11, page 343, it was added to the XML table.  The table using HTML data kept his ID when he became a Spry data set.

  Here is a screenshot showing the HTML above and XML tables downstairs.

  I hope someone can explain why the table HTML lost its style CSS and how it can be reapplied.  I tried to carefully follow all of the steps in the book.  Thank you.

  

  Look at the CSS file and, for example, see the following resources

  . Happy section table {}

  do-size: 90%;

  Width: 740px;

  margin left: 15px;

  border-bottom-width: 3px;

  border-bottom-style: solid;

  border-bottom-color: #060;

  border-collapse: collapse;

  }

  He translated means that you apply a style to an array element inside a section element that is inside an element with a class of content.

  Now, take a look at the markup and see

  Classes and green events

  Here we see a table inside an element with a class of content. Compared to the style rule, the section element is missing.

  Add

  and don't forget the closing (
  ) tag. The markup becomes

  Classes and green events

• Is it possible to create two-way multiselect tables? Help.

  Hey everyone (once again since you're indeed great to help me to).

  I was wondering if it would be possible to create two-way multiselect tables to interact with each other, as qlikview behavior have, because that's my goal.

  Imagine that I have 3 tables in my schema/database:

  Departments (of an HR diagram), with the following attributes: department_id (primary key), department_name, manager_id, location_id;

  Salary_by_job (created for this purpose), with the following attributes: job_id (primary key), department_id, salary, min_salary, max_salary;

  Employees (from HR diagram), with the following attributes: employe_id,..., job_id, salary, manager_id, department_id

  Would it be possible to creat multiselect two-way tables?

  Like the following:

  -I click on a Department, it shows the data relevant to this Department in the table salary_by_job and the employees table.

  And after having clicked on that, I could click on a single employee and the department table would be the same (because it's an employee in the same Department), but the salary_by_job would show only the information about the argument job_id for this employee.

  I'll try to show some text here:

  Department (selected line = 1) = Department of Public Information (which has 3 employees)

  Employees = X (with the job_id = adminargument), are (with the job_id = managerargument) and Z (with the job_id = Internargument)

  Salary_by_job = Admin, with data blah blah blah, Manager, with data blah blah blah and trainee, with data blah blah blah

  And then I have to click on the X of the employee and the result would be:

  Department (selected line = 1) = Department of Public Information (which has 3 employees)

  Employees = X (with job_id = adminargument)

  Salary_by_job = Admin, with data blah blah blah

  Can do something like this? If so, how?

  I think attached with fasteners at each table and have links to move forward and backward.

  If anyone has an idea how to do this, please respond, it may be useful.

  Thanks a lot for all the help. Have a beautiful day!

  Kind regards

  Frederico Barracha.

  BTW, I use jdeveloper 12.1.2.0.0

  Mensagem editada por: FredericoSB

  FredericoSB,

  Have you tried to add a setPropertyListener for tables and change the collectionModel to the 3rd table accordingly?

  Ex: Suppose you have three tables, Parent (VL)-> child (VL)-> grandchild. There is a relationship between the (VL) Parent-> child.

  Now, you can have links to tree for both the GrandChilds (for example GrandChildViaParent and GrandChildViaChild).

  Your jspx could be something like

  If all your tables are read-only, then you can change it to something like

  This is just a sample. You could implement the same for all properties in the table of a grandchild as EL to make editable as well.

  It comes without coding. If you care to code a little, you could use a dynamic array in place and tie the value accordingly in each of the selectionListener in the table (that would be a neat approach)

  Arun-

• Privilege system to create constraints on the Tables belong not to the

  I'm a user of the application who must create and then drop a check constraint on a table that is partitioned in another schema. The code is generic, and the name or the table owner is not known in advance.
  
  The user of the application has the ALTER ANY TABLE system privilege granted via a role, and also has "all THE ' table privileges on the table, THE DML privs, SELECT, REFERENCES etc. - also through roles. The user of the application has a synonym private for the data table.
  
  The command I use is:
  
  ALTER TABLE any_table
  ADD CONSTRAINT generated_name
  CHECK (CASE WHEN BUSINESS_DATE = TO_DATE('20121130','YYYYMMDD') AND = 6 AND PROCESSING_LOCATION = "CAP" RUN_ID THEN 1 OTHER 2 END = 2);
  
  It fails with:
  
  ORA-00942: table or view does not exist
  
  The user of the application can query the table very well and even modify it to partition exchange using a similar code. I tried the table name and the name of constraint qualification with the owner of the schema; calling the makes table name no difference, by qualifying the name of the constraint is not allowed. I changed the body of the constraint to a simple condition - it predictable made no difference.
  
  I would appreciate your help and your suggestions.

  Has nothing to do with privileges. ALTER TABLE requires the name of the table. Synonym will not fly. Use:

  ALTER TABLE table_owner.table_name
  ADD CONSTRAINT generated_name
  CHECK( CASE WHEN BUSINESS_DATE = TO_DATE('20121130','YYYYMMDD') AND RUN_ID = 6 AND PROCESSING_LOCATION = 'PAC' THEN 1 ELSE 2 END = 2);
  

  SY.

• MDM 2.0.1 - What is meant by the "rail" mdm data table?

  What are the 'rail' mdm data table? What they contain? Examples:
  * d1_dvc_k
  * d1_contact_k
  * d1_sp_k
  * d1_install_evt_k

  These tables are tables of 'key '. This concept is part of the infrastructure of the Oracle Utilities applications and is used to hold the values of the unique keys for entities among different environments. In the past it has been used for example by the engine of archive to ensure the key value of the transferred Scriptures to your archive, would still be to your live system. This would prevent the system to create a new entry with the same key as an input value in your archive.

• How can I find out who created a new data center or virtual?

  Is there a specific log file?  I'm trying to find out who created a new data center and some VM.

  The events are not stored in a file, but are stored in the database of vCenter in the VPX_EVENT table. The creation of a data center is a vim.event.DatacenterCreatedEvent in the EVENT_TYPE column. The user who has created are in the USERNAME column. The name of the data center is in the DATACENTER_NAME column. Time of creation is in the CREATE_TIME column.

  I tried to create and delete a data center and after removing it, I could always find events in the database.

• Need to fill the share value in the ADF created from a mapped table free tree

  Hello
  
  I have an Adf BC for a menu that is stored in the table.
  I create an ADF data control menu in my user interface.
  the structure of the table is the following
  
  menu_id number
  menu_display_name varchar2
  menu_action varchar2
  
  I have to display menu_display_name in the user interface and the corresponding action should be the value from the menu_action column.
  The page has a link of the tree for the menu and the MenuDisplayName & NomMenu are two attributes of the VO selected in the section display the definition of link tree.
  The screen is fine, but the action does not work.
  I tried several values for the action attribute, but it fails every time.
  
  javax.faces.el.EvaluationException: method not found: pageTemplateBinding.MenuAction)
  at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:51)
  at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:102)
  at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)
  at org.apache.myfaces.trinidad.component.UIXCollection.broadcast(UIXCollection.java:148)
  at org.apache.myfaces.trinidad.component.UIXTree.broadcast(UIXTree.java:232)
  at oracle.adf.view.rich.component.rich.data.RichTree.broadcast(RichTree.java:248)
  at oracle.adf.v
  
  Here is my code for the page
  < af:tree value = "#{bindings." MenuTableView1.treeModel}.
  var = 'node '.
  selectionListener = "#{bindings." MenuTableView1.treeModel.makeCurrent}.
  rowSelection = 'single' id = 'pt_t1 '.
  partialTriggers = "pt_cl1" >
  < f: facet name = "nodeStamp" >
  < af:commandLink text = ' #{node. " MenuDisplayName}"id ="pt_cl1"action =" #{node. " MenuAction}"/ >
  < / f: facet >
  < / af:tree >
  
  Help, please
  
  Thank you
  Gordon
  
  Published by: Tarique_H on October 20, 2011 03:43

  Hello

  Ok. I ask you to use bean managed to display the menu.

  To the action method, you create the managed bean.

  managed bean code would be like this.

  public class ManagedBean
  {

  public string menuName()
  {
  .. ethical
  }

  }

• Data tables example Oracle?

  Hello
  
  I created the thread SQL and PL/SQL... goes is the link
  
  
  Oracle example data tables?
  
  Any direction is greatly appreciated. Thank you!!

  Examples of Scripts diagram and descriptions of objects
  http://download.Oracle.com/docs/CD/B28359_01/server.111/b28328/scripts.htm

  HTH
  -André

• automatically create source and target tables

  Hello
  I need to convert many flat COBOL tables (each table has a file description and a data file) to the Oracle Tables.
  I just create (using the 'flat file to oracle table' online documentation) my first project and it works.
  
  It is possible to automate the operation without manually create each single source table and the target table?
  Where can I find a manual?
  
  Thanks to advice
  Fabio

  Fabio,

  I do not see how ODI could do this process automatically except by accessing the repository, but it won't work for repositories of executions.

  I suggest do you it manually...

  On the stpe update, if you need not change the revenge for SQL append coming to do inserts.

  Do not forget to put the IKM 'Flow Control' or 'no' which generates fewer steps and really increase performance...

  No sense?

  Cezar Santos
  [www.odiexperts.com]