Create file .ipa distribution

Similar Questions

• The easiest way to create a .ipa file

  What is the best way for me to create a .ipa file?

  I have not need publish on Apple or create an application, just need to be able to share a file rather than .folio .ipa

  Thank you

  Emma

  You would need a license of the enterprise with Adobe and Apple to do this way.

  Bob

• Single edition - could not create the .ipa file

  I have a monthly subscription for the creative cloud, which, from what I understand, allows me to submit an application (create a .ipa of InDesign for the App Store) withouth having to purchase a serial number unique edition for DPS. I have reached the final stage in the DPS application builder where I should be able to activate my .ipa file to test, but it requires a serial number unique edition. I see nothing downloadable creative cloud in this regard, and my InDesign was signed to my Adobe account when I exported my folio.

  I know it's the same problem as described in a previous thread: http://forums.Adobe.com/message/4786587#4786587 and I tried these steps to remedy, but nothing works. As soon as I receive the APP Builder he asks me a serial number unique edition.

  I have so far had nothing but trouble since the subscription to the cloud, with passwords in conflict (with the old account with dps), problems of alimony unanswered and other things. Please can someone just help me get past this problem with the compilation of this app.

  For the record I use InDesign 5.0 (previously owned prior to the purchase of cloud), that there may be an impact on what anyone?

  It seems that the application has been created somehow incorrectly so asking serial number if you are a MAC user. We need to remove the application that requires the serial number and re-create the application. I'll get the application removed for you (send you a PM).

  1. Once deleted, connect on folio built rpanel with the same ID used for the subscription of CCM.
  2. Select the folio to use to create the application.
  3. Go to the sign fly menu and choose «create app» He should not ask the serial number any longer.

• Problems to test files (ipa and apk)

  Thank you for your help in advance.

  I have an old mac (it's right there for the transfer, the files have been developed on a PC), so it does not recognize the iPad except to download files. I can't transfer all files ON the iPad. So, I tried dropbox, but I can't get the iPad to open the .ipa file. Any other ideas on how to get the file .ipa on the ipad? Email does not work either.

  Another source of concern, my folio files were more than 100 MB and the .ipa and .apk files were up to 8 or 9 Mb. I wonder if the problem is the files themselves? The thing only glitchy I'm running into is b/c I am in a University can't generate my certificates only for myself, I have to work in my office of technology to get them.

  Any other ideas?

  Thanks for your help,

  Michele

  For the test of content, use Adobe Content Viewer on iPad. Once you build the app, a multi app problem is usually only 4-5 MB .ipa and about 10 to 20 MB for .apk since the content is hosted by the Distribution of Adobe server.

  To transfer the .ipa on iPad, you need a Mac or a PC that can detect your iPad and iTunes. Try using https://sendnow.acrobat.com/ to transfer the ipa to a PC or Mac and then use iTunes to install the developer.ipa on your iPad.

• Create a .ipa via DPS

  I have a monthly subscription for the creative cloud, which, from what I understand, allows me to submit an application (create a .ipa of InDesign for the App Store) withouth having to purchase a serial number unique edition for DPS. I have reached the final stage in the DPS application builder where I should be able to activate my .ipa file to test, but it requires a serial number unique edition. I see nothing downloadable creative cloud in this regard, and my InDesign was signed to my Adobe account when I exported my folio. Anyone know how I can fix this problem? Thanks in advance!

  Check this thread, it's the same problem described above http://forums.adobe.com/message/4786587#4786587

• Move the files ipa

  Need help to understand the 'Mobile Applications' folder and files *.ipa.

  I'm about to upgrade my this SSD to a larger. According to Samsung SSD primary must be 20% vacuum, which is a big problem, to be able to clone the drive. Is there a way to temporarily move the Mobile Applications folder and/or all its files incl. app-files?  And then move everything back again once the new drive after swapping.

  When I see the little cloud symbol in Appstore I really feel that the applications are really located on a remote server. Is it not the case?

  PS I have a laptop Windows 7/64 pro.

  See make a library of portable split.

  TT2

• Executable file cannot create files

  I created a VI that creates files in its operation. It downloads files via FTP and also creates a config file, if it does not already exist.

  When I ran the VI without building in an application everything has worked well. Now that I have built in an application, he cannot create any files at all for some reason any.

  The strange thing is that it doesn't throw any errors. Part of my application FTP receives a list of files in a directory through then a loop using the 'get' vi file it draws in the FTP in the Toolbox of the internet. The for loop to zip right through the list of files without having to download them, but acts like he did download them. Its supposed to wait until it downloads or expires. As I said though, nothing in the VI can create all files. I'm trying to create a configuration file, but it is not created.

  I am even dealing with the case where when I use the 'VI path.vi current"from a stand-alone application, it will send a path like c:/directory/myprogram.exe/currentvi.vi. I analyze it to the directory of the real executable without a hitch.

  I am running XP, not vista, so it's not like I need to run it as an administrator or something. I'm puzzled. I hope that I have adequately described the behavior of this problem for you guys.

  Hi Rex,

  before installing all the drivers (unnecessary):

  Have you checked all the wires of the error? Especially in the creation of your program file section? All messages of that?

  Can you show your code (a light at least version)? You can replicate the problem with an example vi?

• How to create files STEP in Multisim

  Greetings,

  Is it possible to create files of the diagrams STEP in Multisim?  I need to create a file of type that people can access it from the server and be able to read without Multisim on their PC.  It would be for the documentation and a technical reference only.  All of the suggestions.

  Hello

  Multisim can create files of the STEP. If it is for documentation purposes, you can convert the Multisim in PDF schema. Simply install a PDF printer driver and "print / create"the Multisim PDF. "

  Kind regards

• Why my recovery disk creation program cancels after 50% of creating files

  I'm doing a recovery disc for my Compaq laptop. It has Vista OS.  I use the recovery disc creation program.  The program starts and shows that it is creating files.  When the indicator progress says 50%, the program seems to stop, and after a few minutes, I get a message say that the process is canceled.  What can I do to create a recovery disk?

  Hello

  This recovery process belongs to HP Compaq, not Microsoft.

  They are the ones to ask about problems when you attempt to make the recovery of the disks.

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  Or you could ask in their Forums:

  http://h30434.www3.HP.com/

  Here is the HP Compaq information on how to make recovery disks:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703#WhenCreate

  Create a set of recovery disks operating system

  HP Recovery Manager to create a personal set of recovery disks. When you select the recovery disc creation process, the HP Recovery Manager examines the PC and determines how many virgins DVD discs will be necessary. According to the model, you will need up to ten or more CD - R or CD-R, or up to three discs DVD-R or DVD + R. The creation process can take up to an hour or more. Do not interrupt the process of creation.

  

  CAUTION: disks must be CD - R, DVD - R or DVD + r using No CD-R/W or DVD - R/W drives read/write because the creation process will fail.

  Create a set of recovery disks operating system by following the steps below.

  1. Click Start and enter the recovery in the field of research. Select Recovery Manager in the list to open the HP Recovery Manager window. Allow the action to proceed, if you are prompted.
     Alternatively, click Start , all programs , Recovery Manager , and then Recovery Manager . Allow the action to proceed, if you are prompted.
  2. Click Advanced options , the creation of recovery disks , and then click Next .
     The program appears to pause for about ten minutes while it examines the computer and calculates how many DVD-R or DVD + R discs are required.
  3. When you are prompted, put a blank disc in the optical disc drive and follow the on-screen instructions to create the recovery disks.
     

     NOTE: If a disc is inserted before the disc insert prompt is displayed, and the Recovery Manager does not recognize the new disk, press OK to clear the error message, then eject and reinsert the blank disc. In case this happens, without loss of data occurs, or damage the computer. It just "stops" the process of recovery that the Recovery Manager to identify the blank disc.

  After all, the recovery disks are created, label the disks and store them in a safe place. If the recovery disks fail when creating or damaged, you can order replacement of HP recovery disks.

  See you soon.

• Insufficient access rights to create files in the specified folder

  Insufficient to create files in specified folder access rights you can't install files in this folder. It will not be installed in a folder that I created is. try to install ti collection of games from Agentix magic

  Try right click on the setup.exe > run as admin.

  See you soon. Mick Murphy - Microsoft partner

• creating files on playbook Simulator

  Hello

  Is there a way to create files and the folder structure on the playbook Simulator and access via software, our application stores files on the Simulator and access them, so we can do?

  You have access to directories in the application sandbox as the main "shared" area that will contain the files for videos, music... etc.

• Administrator cannot create files or run defrag.

  I am running Windows 7 and I am logged on as administrator.  I'm trying to run some DOS commands at the command prompt,

  but I am running into a problem.  For example when I run the defragmentation of the C: prompt.  I get this message.

  "The disk defrgamenter cannot start because you have insufficient privileges to perform this operation."

  Also, if I try to create a file in the C: or C:\Users directory, I get the message "access denied."

  I'm able to schedule defragmentation using the Disk Defragmenter tool in Windows 7.  Any help would be greatly appreciated.

  To run some commands, you must open the elevated command prompt:

  1 log in under an administrator account.

  2. click on the start planet.

  3. type the three letters cmd in the search box.

  4. press on Ctrl + Shift + Enter

  5. click on "run as Administrator".
  UAC will not allow you to create files in the root directory of the system drive, unless you do under the elevated privileges (not recommended).
  BACK when there is more than 10 years with Windows ME (good riddance!) fashion. The black screen is now called the Console or command prompt. Orders including defrag.exe are commands to the console.

• Excel, Word, PDF icons and newly created files changed with the page folded with icons instead of appropriate icons.

  Original title: Excel, Word, and PDF icons do not appear I folded the page with icons instead of using appropriate icons - even with newly created files - Microsoft Windows 7!

  I have Windows 7.  I folded the page with icons instead of appropriate icons of Microsoft - even with the newly created files.

  When I change the "open with" to the different program and then select the right product to Microsoft again, it always produces generic folded paper with icons on it instead of the icon to the right for Excel, Word, PowerPoint, etc.  Help!

  Restore your default file types associations...

  http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.html

  Scroll down to exe - executable application files.
  Click on the exe

  Follow the instructions from #1 to #6 in the upper part.

  Scroll to lnk - shortcut link (LNK) files.
  Click on lnk

  Follow the instructions from #1 to #6 in the upper part.

• Cannot create file bar

  Hi people,

  I created the file bar in obiee 12 c (installed in windows 7)

  I'm following the oracle (http://docs.oracle.com/middleware/1221/biee/BIESG/migrate.htm#BIESG1798) documentation and I am unable to create the folder bar and get the error (SERIOUS: failed to get the Singleton data using API oracle.bi.base.lcm directory.)

  API. Management.getSingletonDataDirectory.java.nio.file.InvalidPathException)

  .

  The following command to create file bar.

  Oracle:

  exportServiceInstance ('/ u01/Oracle/Middleware/Oracle_Home/user_projects/domains/bi ', 'ssi', ' / u01/workDir ', ' / u01/exportDir ' applicationName = None, applicationDesc is None, applicationVersion = None, includeCatalogRuntimeInfo = false, includeCredentials = None)

  Changed my coordinates

  In my local created 2 directories ('D:\workdir', 'D:\exportdir')

  exportServiceInstance (would be: \obiee12c\Middleware\Oracle_Home\user_projects\domains\bi', 'ssi', 'D:\workdir', 'D:\exportdir', applicationName is None, applicationDesc = None, applicationVersion is None, includeCatalogRuntimeInfo = false, includeCredentials = None)

  

  Could you please help on the above question.

  Thanks in advance,

  Vandenberghe

  Hi Mathieu,

  The settings you had (according to the guidelines of the screenshot) appears to be incorrect.

  Try below:

  exportServiceInstance ('/ D:/obiee12c/Middleware/Oracle_Home/user_projects/domains/bi ', 'ssi',' / D:/workDir ',' / D:/exportDir ' applicationName = None, applicationDesc is None, applicationVersion = None, includeCatalogRuntimeInfo = false, includeCredentials = None)

  Thank you

  Wahid

• ORA-27038: created file already exists

  Dear all,

  Attempt to create physical database from the previous day. But the following error prevented the creation with Eve success:

  ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of Db in dual at 03/09/2014 18:33:48

  RMAN-03015: an error has occurred in the script stored memory Script

  RMAN-03009: failure of the backup command on the channel of pri2 at 03/09/2014 18:33:48

  ORA-17628: error Oracle 19505 returned by remote Oracle Server

  Complete recovery manager.

  ################################################

  The < stbclone_ora_7678.trc > error message is:

  ORA-19505: impossible to identify the file ' / ndrmanbu/dblogarchs2/logarch10000000482_848830079.arc '.

  ORA-27038: created file already exists

  Linux-x86_64 error: 17: file exists

  Additional information: 2

  We have made sure all directories are empty before you begin the process of creating.

  ###############################################

  The < alert_stbclone > file error message is:

  Errors in the /u01/oraclone/db/tech_st/11.1.0/admin/stbclone_nutrisec/diag/rdbms/stbclone/stbclone/trace/stbclone_ora_7678.trc file:

  ORA-19505: impossible to identify the file ' / ndrmanbu/dblogarchs2/logarch10000000482_848830079.arc '.

  ORA-27038: created file already exists

  Linux-x86_64 error: 17: file exists

  Additional information: 2

  ##########################################################

  Log files and the Métis are attached.

  Kind regards

  Shareef

  It seems that we should check for the primary database log files cross.

  RMAN > overlap archivelog all;

  This then check out a new attempt of physical creation process... I will update the discussion with the results... (Hope that would solve the problem).

  Kind regards

  Shareef