Executable file cannot create files

Similar Questions

• LabVIEW FPGA: Not possible to create an executable file that uses the FPGA in Simulation Mode? I get a weird error code

  When I try to create an executable from a host VI that has an "Open FPGA VI" reference who has run, the value "Dev computer w / Sim i/o" value, the application is built without error but when I try to run it, it opens with an arrow broken to run and has the following error:

  "VI has an error of type 2302200.  The full development of LabVIEW version is necessary to correct mistakes. "In fact, he repeats this message two times in the same window for some reason any.

  Moreover, I * have the LabVIEW full development version and I use 2010 SP1

  While the error message is not as clear as it could be, you're right: you cannot run an executable file that tries to run an FPGA VI in the simulation.  It would be nice if there was an error in compiling.  I always forget to switch to run on the target FPGA before building my application and discover the error until I have it copied on the system in the laboratory.

• Cannot start web server on the executable file

  Hello

  We have a problem with a Web server - we cannot get to initialize the help of nodes of property or the ini on a compiled executable file.

  As part of our application, we are starting the Web server to publish a status page to be read remotely. This works very well when we are running in the development environment and also when we run an executable a PC with installed development environment, however it will not boot on a PC with just the runtime installed.

  I have attached some of the code that functionally does exactly the same thing in our main application. I used this as my Tester code and built in an exe while trying a lot of different things to fix.

  When executing:

  • The code will sit in the while loop until I press stop.
  • Web server: Active Server = FALSE
  • Out error = ERROR No.

  

  In the full application the while loop waits a few seconds before throw an error if the server is not started. In this example, I can let the loop running for awhile without leave. Normally, the boot time is<50ms when="">

  It's the ini file to the executable file:

  [WebTest]
  server.app.propertiesEnabled = True
  Server.OLE.Enabled = True
  server.tcp.serviceName = "My Server computer/VI"
  server.vi.propertiesEnabled = True
  WebServer.Enabled = True
  WebServer.TcpAccess = "' + * '"
  WebServer.ViAccess = "' + * '"
  DebugServerEnabled = False
  DebugServerWaitOnLaunch = False

  And it is the Web server configuration file:

  ErrorLog "$LVSERVER_ROOT/logs/error.log".
  LogLevel 3
  The default server name
  DocumentRoot "$LVSERVER_ROOT /... /.. '. "/ www".
  Listen 8000
  ThreadLimit 10
  TypesConfig "$LVSERVER_ROOT/mime.types»
  DirectoryIndex index.html
  LoadModulePath "$LVSERVER_ROOT/modules '" $LVSERVER_ROOT/LVModules "" $LVSERVER_ROOT /... ".
  LoadModule LVAuth lvauthmodule
  LoadModule LVSnapshot lvsnapshotmodule
  LoadModule LVRFP lvrfpmodule
  LoadModule dir libdirModule
  LoadModule copy libcopyModule

  AddHandler LVAuthHandler
  AddHandler LVSnapshotHandler .snap
  AddHandler LVRFPHandler

  AddHandler dirHandler
  AddHandler copyHandler

  "CustomLog"$LVSERVER_ROOT/logs/access.log"'%%u %t \"%r\ hour' % > s %b.
  KeepAlive on
  KeepAliveTimeout 60
  Timeout 60

  As can side note, anyone tell me where the $LVSERVER_ROOT variable is configured?

  I tried the things:

  • Copy a new default configuration file before the entry into force
  • Writing a predefined file (encoded) before initializing config
  • Definition to root before initializing directory (it actually generates an error because the server is not active...)
  • Set WebServer.Active = TRUE several times inside the while loop
  • Toggle the web server in the ini file

  System:

  • LabVIEW 2010
  • PC with Windows 7 running

  Thanks for any help, because it makes me crazy slow!

  Ben

  Hi Marco, thanks for the reply.

  I have this guide was reviewed previously and had done all that he but a small section who gave me a hint of something to try and I have solved my problem, so thank you!

  If anyone is interested, here's the problem:

  The directive DocumentRoot folder in the config must exist or the Web server cannot be started. So basically, make sure that the file points to a folder that exists!

  This leaves two small annoying problems if - you can't see if the file exists (and then create it) before starting the Web server, because you can not query the path to the folder without the Web server running.

  AND

  You can't really define the configuration programmatically file as parameters from the file are responsible for execution, not on the start Web server.

  The result of this is that the config file and the folder root document should be created (and corresponding of course...) when the executable is built / installed on the system. Not a massive headache, but it means do not forget to put things in the build specification and do not rely on software to do the job at startup

• Server 2008, XP roaming profiles and "cannot create a file when that file already exists"...

  Hi all

  I'm working on a Server 2008 domain with XP SP3 clients.  The question is: create a new user, their profile is \\server\profiles\%username% [where %nom user % is their new username!].  Security on the profile folder is set so that the administrators have full access and the user has read & execute, list folder content, read and write access.

  The user is able to login ok there is no problem with roaming profiles [otherwise, they would get a message on with a temporary profile loading] which suggests, but when they disconnect they get a message saying that some files could not be created [it varies], followed by "cannot create a file when that file already exists".

  Any help would be greatly appreciated!

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows server on TechNet forum. Please ask your question in the Forums in TechNet Windows Server.

• Cannot open the com files and executable file in the Original Windows Vista Software activated after updates to the registry and cleaning, error message and all the setup.exe files has been disabled, why?

  I use Vista Ultimate SP2 preloaded o/s and windows is activated with a genuine problems with executable files with product of what ID 89580-OEM-7332132-00031 on PC, the problem happens when I'm uninstalling some registry tools, the error message I got was 'impossible to connect to the microsoft client group policy server' and whenever I try to run the executable file .exe or .com I get error messages "the windows don't. not find the environment option that was entered path c:\windows\system32\msconfig.exe for example. What is your solution if all the drivers I downloaded from microsoft Update site and support Web is unexecutable because of registry files missing that causes all the executable files and com files to display error messages when clicked. What was missing in the original windows registry files after running the tool registry optimizer? What was missing in my windows vista original? Need help 4th level or windows file recovery software onwer.

  I was able to surf the internet, able to do facebooking, capable of voip webcam and chat however installation and admin work on operating system software has been disabled due to lack of the registry files all the executable files was disabled after a registry cleaning registry optimizer and all the setup.exe has been disabled when I run saying them I don't have permission to run setup.exe because I like not connected to the microsoft Group Policy Server, but it is an original windows software, I can download files from the microsoft Web site and save on my drive hard but cannot run the executable installation files, which was lacking in system files that stopped all the executable files to run, except the internet broadband. Need help 4th level or windows file recovery software onwer

  Hello

  Method 1:

  I suggest you to do a scan of the SFC. File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.

  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  b. click on continue or provide administrator credentials if prompted.

  c. in the type in the following command prompt window and press ENTER:

  d. sfc/scannow

  e. you should see the following message on the screen:

  § Begin the analysis of the system. This process will take time.

  § Beginning verification phase of system scan.

  f. % verification complete.

  g. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article mentioned below.

  http://support.Microsoft.com/kb/929833

  Method 2:

  Create a new account user has administrator rights and check if you are able to install applications or not. Follow the steps mentioned in the article below.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Method 3:

  I suggest you do a system restore and check. See the article mentioned below

  System Restore: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• executable files: cannot access the file because it is being used by another process

  Hello
  I created a file named test.bat on my desk
  baptized "test.bat" and sent the notebook, wrote "REM" and recorded.
  so, I closed my notebook and reopened, has added another "REM" and saved the file again.
  then I tried to rename, move the file to another folder and delete
  everything went without any problems.

  But if I create the file and run it, the command prompt will appear for a while and then disappear.
  I can rename or move the file without any problem,
  But if I try to edit the file in Notepad, I get this error:

  The process cannot access the file because it is being used by another process.

  and the file is not saved.

  also, if I try to delete the file, it seems to be deleted until I press F5, the file appears again.
  When you try to rename/move this new file, I get another error:

  File Access Denied

  You need permission to perform this action

  You need the permission of the administrator of the computer to make changes
  in this file

  It seems the file is opened (or if I choose to delete) after a few minutes, then it is not if I try to access
  the file (I kept pressing F5 every few seconds for 15 minutes and the file is missing)

  the problem appears if occuar with any file name, anywhere, not just the office or home by car, not even on the same disk,
  while I had no problem when I started in an old installation of windows xp and repeat the same steps.

  I tried to use the sysinternals utility handle, that's what I have:

  After creating test.bat:
  C:\Users\User>handle test.bat

  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  No found the corresponding handle.

  After you run test.bat:

  C:\Users\User>handle test.bat

  Handle v3.51
  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  System pid: 4 type: file A18: C:\Users\User\Desktop\t
  EST.bat

  has obtained the result above after attempting to remove test.bat also.

  After the creation of othertest.bat:

  C:\Users\User>handle othertest.bat

  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  No found the corresponding handle.

  After execution of othertest.bat:

  C:\Users\User>handle othertest.bat

  Handle v3.51
  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  System pid: 4 type: BD0 file: C:\Users\User\Desktop\o
  thertest.bat

  After you rename the othertest.bat:

  C:\Users\User>handle othertest.bat

  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  No found the corresponding handle.

  C:\Users\User>handle renamedtest.bat

  Handle v3.51
  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  System pid: 4 type: BD0 file: C:\Users\User\Desktop\r
  enamedtest.bat

  the also occuars when I run any .exe file and delete it after its finished running, I deleted
  the handle.exe and the handle64.exe after the test above and at the same time returned when I updated their records.

  can someone help me?
  IAM using Windows 7 ultimate 64-bit.
  Thank you.

  I struggled with this VERY ENNUYANT thing for a long time on a Windows Server 2008 R2.

  Just found the answer:

  http://superuser.com/questions/260375/why-would-system-continue-locking-executable-file-handles-after-the-app-has-exit

  Activation of the service 'Application Experience' does the trick for me.

  If I got paid for every minute spent dealing with the mysteries of Microsoft... No, wait! Paid!

  Thank you Microsoft!

• Creating an executable file

  Hello. I use Windows 7 Professional. I am trying to create an executable file. I searched here and I am also watching youtube videos more my online OR training and following the directions. The problem is that all of the examples I could find are older versions of windows. I have attached my project, but also a screenshot of what happens. I did however, when I double-click on the executable file it doesn't open the Vi, it opens the file used to create the executable file. I don't know if the difference is due to the OS, but I followed behind the videos as much as possible, with a few points mark because I have is exactly what show training videos. I also LV 2014 and it does not with training videos, but it seems that it is not a big difference between the two. If I have not provided sufficient information made me know. The password to the Vi is "2015". Thank you

  Within the executable build specification ("Piezo rig"), go to the tab "Source Files" and you add main VI ("displacement piezoelectric test exe.vi") at the start section screws.

  You shouldn't have problems based on the operating system or version of LabVIEW. Make sure that you install runtime matching as well as the executable file if you are deploying to another computer.

• How can I include all of the necessary files required for the DAQ Assistant create an executable file?

  I create an executable file to run on a computer that does not have LabVIEW.  The problem is that I am using the DAQ Assistant.  The hierarchy of the VI is big enough, and I do not know how to include all the required files to eliminate the error "the version of LabVIEw full development is necessary to correct the errors."  A picture of the hierarchy of the VI is attached.

  I think I'm missing something in the installation.  I'm downloading now the DAQmx.  I knowticed that all 7 of my missing Subvi are DAQmx * .vi

• I get an error message, "unable to print Test page. You want to discover the convenience of printing support? Cannot create a file when that file already exists"while trying to print.

  Hello

  I could connect network printer and also to view its properties, but when I try to print it shows error.

  Example: when I try to print a test page using the network printer, error

  "Test page cannot print. You want to discover the convenience of printing support? Cannot create a file when that file already exists ".

  I already try to remove the printer and installed again, again, has not worked for me. Someone has an idea for this?

  Concerning

  Original title: unable to print using network printer

  Hi chungb,

  Thank you for keeping us posted.

  I would have you post your query in the Forums of Windows Server , as it is addressed to an audience of it professionals.

  Check out the link-

  http://social.technet.Microsoft.com/forums/en-us/winserverprint/threads

  We know if you need help.

• KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?

  KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?

  Hi dakota25,

  ·         Did you do changes on the computer before the show?

  ·         You are able to install other updates successfully?

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

• "Cannot create file, no access to", trying to move the pictures to a media card.

  I want to send pictures on a memory card for a digital photo frame, but when I click on the image I get a warning saying that the computer could not move or copy the file. Cannot create the directory. How to make photos accessible?

  If you receive an error indicating that:

  "Impossible to copy the XXXX: failed to create the directory or file.

  There is a possibility that you copied too many files to
  the root directory of the memory card... This can be overcome
  by placing the image files in folders on the card.

  (FWIW... you may need to remove a photo from the map to)
  make room for the record)

• Advance Mode XP Backup, twice after backup is complete, cannot create an ASR file because I did not insert a floppy disk. I insert a disc in my drive, please help me how do.

  Running a WindowsXP Professional, I tried twice to my systems backup using the Backup Wizard. Twice tried to use advanced mode to save. I have 3 choices, first Assistant backup, Second, Assistant food and finally Assistant recovery. I clicked on the wizard of recovery of automatic systems, the wizard to create a backup of the two parts of my systems, a diskette that has my systems settings and other media that contains a backup of my score of local systems.

  Twice I tried to insert a disc into my drive and started to click on column e ASR. so to start the long process of backing up my files, after almost two hours later my backup files already completed, a screen appears saying: this isn't in my Wizard floppy drive cannot create ASR inside. He needs a disc with an ASR info, more data backup systems to restore my computer if it meets a major systems failure. My problem is, how to set the disk to my systems before starting settings to back up my files and data with the systems Advance Recovery Wizard first. Thank you.

  Hello

  I suggest you to refer to this link and check if it helps:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/ntbackup_adv_backup_options.mspx?mfr=true

  It will be useful.

• Unable to create restore point. Vista64. Could not create the scheduled task for the following reason: cannot create a file when that file already exists

  RAID 5 obtained corrupte had to rebuild after that can't create system restore point. Tried everything sfc, fsutil, Dungeon SystemPropertiesProtection screen displaying this error: "could not create the scheduled task for the following reason: cannot create a file when that file already exists." (0x800700B7)"system of work in all other respects. SFC says it found and fixed errors every time I run it.

  Fix tried Della Li: Please remove the WindowsBackup folder in the HKEY_LOCAL_MACHINE NT\CurrentVersion\Schedule\TaskCache\Tree\Microsoft\Windows.

  Delete the WINDOWS BACKUP folder. Unfortunately this folder does not exist.

  Checked VSS, Taskscheduler and other services are runnig

  Tried to boot from the CD and widowed revover. Says no problems. The error to any manulation of the checkbox in the properties of the system, the system protection screen

  Solved

  It turns out that task scheduler got corrupted it have several tasks Scheduler said were not available, but are still in the working directory. These tasks especially SR from compensation directory solved the problem and I can now create backup points.

• the contents of this file cannot be decompressed the executable file that you are attemptiong to run

  The contents of this file cannot be decompressed the executable file you are trying to run has been corrupted you can get another copy of the file check its integrity and try again.

  You have not told us what you're doing or what program you are trying to use...

• Cannot create the C:\WINDOWS\system32\drivers\drive.sys file

  Cannot create the file 'C:\WINDOWS\system32\drivers\drive.sys '. The process cannot access the file because it is being used by another process.

  I get this error message all the time on my desk. No matter what I do, internet research, watch videos, listen to music, work offline, it does not apply to just be online. I really want to know how to solve this problem, I searched everywhere I could, and I can't find again no anwer. Please reply and if you want more information, then I'll be happy to provide.
  Thanks for your time.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.