Create new pages but do not publish yet.

Similar Questions

• on windows xp, my system restore to a previous restore point. have you tried many restore points & creating new ones but the system does not restore. all the solutions out there?

  on windows xp that my system restore to a previous restore point, I tried many restore points & created new ones but the system displays "could not be restored", any help out there.

  Let see... What do we know about your system environment:

  It's windows xp.

  If we knew more, you would probably now.

  What is the problem that you are experiencing this thing you System Restore will be remedied?  System Restore is not a time machine.

  The system restore already worked successfully in the past?

  Thank you MS Answers, allowing the resolution of simple problems like frustrating and a lot of time as possible by asking only not for any information system when a new question is asked.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.
  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.
  The scans by operating clean, reboot, test and we can fix any other issues.

• The new Page tab is not seen

  Hello
  
  I work with the database server and I added the new page tab is not seen.
  I have already compiled and validated the project. Also, I already have the server.
  
  New project: Xxaa new project
  My new tab Page has like screen: new screen Xxaa
  : My view new Xxaa new
  
  I added the new page tab in the "Siebel universal Agent" Application and I have compiled the project "Xxaa new project" and "universal Agent of Siebel. After I connected to "Call Center", but I do not see the new Page tab
  
  I sailed in the application 'Card Navigate-> Site-> User Preferences-> tab' layout but my new tab page "Xxaa new screen" is not checked "Hide" flag
  
  Also I added the new responsibility: "Xxaa new responsibility" and I added the new discovers 'Xxaa New View' and the SADMIN user has grants.
  
  What should I do?
  
  Published by: Wings2009 on July 15, 2009 19:03

  Did you create new columns? If Yes, have you applied and activted these columns
  Try a complete compilation of all projects

  Goud

• Cannot create new pages in update Muse

  I've updated to the latest version of Muse this morning, and now I can't create new pages to my site, either by duplicating a page or by clicking on on signs of hand and on the other an existing page +. It's big enough (~ 150 MB), but I have not had this problem before. I rebooted my computer and saved new versions of the site after it has been converted, and nothing has worked.

  Can anyone help? Thank you!

  In this case, I think someone Muse team should repair your site.

  If it is not too large, you can manually rebuild the pages and copy & paste the content from the old to the new site.

  That good luck!

• Adding a new license for a new Member, but may not use programs. Saying licensing issues... any advice?

  Adding a new license for a new Member, but may not use programs. Saying licensing issues... any advice?

  You use the Enterprise Dashboard?

  If so

  1. ensure that they use the correct ID type. So if they have been added to the dashboard with Enterprise or federated ID to ensure they do not use the Adobe ID or vice versa.

  2. bring to sign out and sign back in to check their eligibility.

  3. If the problem persists, then try this:

  The opm.db file contains the login user cached information and delete this file is a useful troubleshooting step. Once deleted a fresh file will be automatically created when you start creative cloud and reconnect.

  1. Close the creative cloud application.
  2. Navigate to the OOBE folder.
     Windows: [system drive]: \Users\ [user name] \AppData\Local\Adobe\OOBE
     Mac OS: /Users/ [user name] / folder/Library/Application Support / Adobe / OOBE
  3. Delete the file opm.db.
  4. Launch the creative cloud.

• How can I do if my client can modify the links in catalyst for business when they create new pages?

  OK so, essentially, I built a site in Muse downloaded to the catalyst for business and I install a site template so that the client can create new pages as each new course arrives, but how can I get the link from the home page to post a link to the new page? Basically, I need the link is editable.

  What would be ideal, it's a sort of portfolio, where there is a sticker and a new page but for my client to be able to add a new project and it would create a thumbnail on the home page and a new page he can edit. Someone knows something like that possible in Business catalyst?

  An update was released today which includes the new feature with hyperlink change/add to the IBE.

  Please update to the latest version.

  Thank you

  Sanjit

• I have a MBP of 2009 end. I updated the material to 8 GB of ram with an SSD of 240gig. I want to run the new OSX, but is not on the list approved for the update. Anyone know why?

  I have a MBP of 2009 end. I updated the material to 8 GB of ram with an SSD of 240gig. I want to run the new OSX, but is not on the list approved for the update. Anyone know why?

  It is a decision that was made by Apple.  El Capitan is the newest OSX that will support a 2009 MBP.

  This is not uncommon.  My 2006 MBP came with Tiger, but is limited to OSX Snow Leopard.

  Old hardware ends up by becoming obsolete with newer technology.

  Ciao.

• Gadget screen appears on the home page but will not move anything to the homepage

  Original title: you had to send a solution to my problem of gadget #1194371707

  gadget screen happens on my home page but will not move anything on the homepage, you said you would email me a solution, but you responded never please, my case is 1194371707

  Delwyn salvation,

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, you are having problems with gadgets.

  1. which browser is installed on the computer?

  2. have you visited a support Chat or call?

  3. What do you mean by 'will not move not anything to the homepage'?

  Since it's Forums Community Microsoft, unfortunately we have not information on case # 1194371707

  Answer to us if you are having problems with gadgets or any other problem of Windows, and we would be happy to help you.

  Good day!

• Reinstallation on my new computer, but can not activate my Adobe Acrobat 7.0 Pro - 24:24 error code

  Reinstallation on my new computer, but can not activate my Adobe Acrobat 7.0 Pro - 24:24 error code

  You need a special version of Acrobat 7.   See the following...

  CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html

• Publishers can create new Pages?

  Hello, I'm wonding if publishers can create new pages based on a template by using inContext Editing.  I want the editor to create a new page for each new topic of the sermon.  Is it possible that they can do this?

  Thank you

  Zachary

  This question is ANSWERED? Are you still having problems with this?

  Let me know.

  -Tom

• New Page tab is not seen

  Hello
  
  I work with the database server and I added the new page tab is not seen.
  I have already compiled and validated the project. Also, I already have the server.
  
  What should I do?

  Hello

  In application access the site - user preferences tab layout, map

  Check your tab is there and hidden is unchecked.

  concerning
  Goud

• problems after upgrading firefox. reset this is ugly. created the new profile, but can not recover data from old profile.

  I use firefox on a MacBook pro. Mac OS X version 10.7.5. There was an update of firefox on a day or 2 ago. Since this was done, I was getting 'syntax error' 5 times, each time that a page has been loaded. Some research has suggested that an application or a plug-in called "social fixer" might be the problem but I could not understand how to get rid of it so decided to try to reset Firefox. Minutes passed and a message was on the screen saying the old files of firefox have been been "cleaned" or something, but it seems to be 'stuck' because the progress bar was little jerky. Doesn't it usually doesn't. So I clicked on "Cancel". After that, I couldn't even firefox to start. Looks like my profile is unavailable or inaccessible. Following the instructions found on the support site, I created a new profile and I thought I copied the files from the previous firefox on the new profile, but when I run firefox, it's a blank slate. None of my bookmarks or passwords are there. It must be here somewhere, but I can't seem to understand.

  Looks like there was a problem with updating the profiles.ini file.

  • http://KB.mozillazine.org/profiles.ini_file

  You can try to remove the current profiles.ini file to force Firefox to create a new default profile where Firefox has not done that.
  You can check if there is a profile folder with a number of attached time stamp and in this case, you can set the location of a profile created in this folder.

  • http://KB.mozillazine.org/Recovering_a_missing_profile
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  If you need to recover data from an older profile, always in the default location, or as a folder of old data of Firefox on the desktop then see:

  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• I copied the old file of passwords in the new profile, but do not see.

  Got a new laptop. Copied the content from the old profile to new profile. Most of the old information are there (bookmarks), but I do not see the passwords. I repeated copying the two files key3db and logins.json specifically, but even the passwords saved on my old profile are not there...

  Could you try again in a new profile and copy only the files logins.json and key3db?

  Create a new profile as a test to see if your profile is the source of the problem.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile already used in the new profile, but be careful not to copy files corrupted to avoid transporting more problems.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• CS6 ID: Addition of new pages, but they don't have an editable text block?

  I feel very stupid. I don't use ID every day if I often forget what I remember. Now here's something I don't understand.

  In my document, I need to insert a new article. I added a few gaps in the Pages panel (select the master pages and drag them to the right location). Then I made one of them had the master 'start of the section' right applied. And I ensured that the section begins here.

  Now, I want to start typing, but I can't type in the text block. I think it's maybe because I need to replace the master on that, but I want only the text block that will replace, not all elements. So, I'm looking for a way to ensure that the text block is substituted and I can't.

  

  I see the signs of hash in a block of text on the page, but there is no way to start typing.

  What I forget?

  Thank you.

  On the PC - CTRL Shift click

  On Mac - Command SHIFT click

  To replace an element on the page.

• When I click on a link, it opens a new page, but nothing will load.

  When I use Firefox and you try to open a link, a new page shows, but nothing loads.

  This has happened

  Each time Firefox opened

  Is a month ago

  Hello Freda.

  You may have a problem with an extension or plugin that obstructs normal behavior of your Firefox. Have you tried to disable all add-ons (just to see) to see if Firefox goes back to normal?