Gadget screen appears on the home page but will not move anything to the homepage

Similar Questions

• Take the tool does not. Take the tool selected - can see the hand but will not take anything

  Hello

  I'm new to photoshop and I am currently working through the tutorials on Lynda.com to learn as much as I can, but I'm stuck at the minute. Tutorials wants me to use the Snipping Tool to move an image and no matter what I do nothings moving. I selected the tool and see that it is selected and that the needle moves on the image but it is not striking, no selection.

  I also did with the letter to select the capture tool. Once again, this works, but will not take anything.

  Any entry in this problem would be highly appreciated. Thank you

  Hi Clara-beautiful,

  Hand tool is running when your image is enlarged and that you want to move to a specific part of the image.

  You must move your image with the mouse after a zoom once you have selected the hand tool.

  Are you a person following the same steps in workflow or other?

• If I'm totally off power to my PC, (storm in the region) to reset, the cursor appears, but will not move until I restart again.

  If I just powerdown (overnight), leaving a/c, connected, the cursor appears and moves, as my mouse moves.  HOWEVER, if I powerdown and completely disconnect the PC, 110V, to keep safe from one close shot of lightning, THEN the problem appears.  After the storm passed, I plug the PC into the 110 outlet, turn on the computer and restart it.  The cursor appears in the center of the screen, but it will not move when I move my mouse.  THE ONLY THING I can do is hit briefly, the power button to turn off the back and then click New to reboot (twice now)... then the cursor appears in the center of the screen and moves when I move my mouse.

  Yes, I still think it's the battery.  If the computer is turned off but still plugged into the wall, food always provides a small amount of power to the motherboard to keep a ready"" State.  In fact, if you stop it, but keep it is plugged, you can send a packet to 'Wake-on-LAN' through the Ethernet that would then turn on your computer so you don't have to press any button at all.  This requires that some things are always under tension even when the rest of your computer is turned off.  Remove the plug from the wall removes this standby power and now the BIOS of your motherboard must hold his memory by falling back on the battery.

  HTH,
  JW

• HP Officejet 6000 printest test page, but do not print anything else. How to print wireless?

  I reinstalled the printer.  It printed the page test perfectly, now I will not print anything else.  How to print again?

  Hello

  Welcome to the Windows 7 community!

  From your problem description, I understand that you can not print from HP Officejet 6000. I take this opportunity to help you.

  Let us perform the following troubleshooting methods and check that it helps to resolve the issue.

  Method 1: Run the printer Troubleshooter
  first of all, make sure that your printer is turned on and connected to your Windows computer according to the manufacturer's instructions. Then, try the printer troubleshooter, which will attempt to diagnose and solve your problem automatically.
  For more information, see the article below:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2: Restart the Print Spooler Service
  You must be logged on as administrator to perform these steps.
  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. right-click on the print spooler service and then click Properties.
  d. on the general tab, next to startup type, make sure that automatic is selected.
  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Method 3: Configure the driver to correct the printer port
  on the tab "Ports" of the "Printer properties" window, select the port for the printer driver.
  a. from the Windows desktop, open the printer properties window.
  b. click the Ports tab.
  c. under "printing on the following ports; Select the port to which your printer is connected.
  Example: In this example, the printer is connected to the "USB001 virtual printer Port.
  d. click on 'Apply' to validate the changes.

  Click on general tab and then click on 'Print Page of Test' to confirm that the changes fixed the problem.

  You can also check out the links for more information.

  Printer problems in Windows: http://windows.microsoft.com/en-US/windows/help/printer-problems-in-windows

  For any further assistance, I suggest you to contact HP printer Support.

  Here is the link: http://www8.hp.com/us/en/support-drivers.html

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• can open the home page but can not load other Web pages.

  I recently installed a network of a company of friends. They have a 8 computers on their network. To start connected the modem cable to router linksys n wireless and then I plugged an EZXS16W linksys 16 port switch. Everything works very well for about a month, until last week. Everything starts fine in the morning when they turn on all computers and continues for a few hours. After that, they can open their home pages (each computer has a differnet one) but when you try to view another web page, it can take up to 10 minutes, or never at all load. If I reboot the router and switch everything goes back to normal several hours then happen again. Any help would be greatly appreciated! Thank you!

  Hi going to T,

  Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to business networks and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want. http://social.technet.Microsoft.com/forums/en-us/categories/

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I tried to replace the start page in Firefox with my own choice of several times home page and will not be defined - I get the circle with the slash through it, when I try to drag the icon of the Web page at 'home '.

  I use Windows 7 Professional and have tried all the tips troubleshooting recommended for this problem. I don't have the new version of Firefox installed, because he had all kinds of problems, so I went back to the version that I had--I believe it's 3.6.24. Since then, I have not been able to define a home page. Any help out there? Thank you!

  Try to drag the tab or the favicon of the site on the Home button if currently drag you selected text.

  If this does not work with dragging the icon and then copy the URL to the Clipboard and paste it via Options window in the area of the home page.

  • Tools > Options > general > startup: Homepage

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• How to reset my home page which WILL NOT be RESET!

  I have used Firefox for several years, it's a wonderful product and I love it. Now, all of a sudden after I installed a few things I get now a homepage by default to an engine search for server proxy, (/proxy.allsearchapp.com/app/start/) I tried to re do the normal option / and adjust the home page option so many times. I also chose NO PROXY server option. I went to the about.config, and exchange the keyword.url nothing helps. I've even entered my cookies and delete the proxy allsearch and still nothing. I worked on this problem for days. I even uninstalled my firefox, restarted my computer many times and restarted and re installed from a new copy and wala... it is still terrorizing me. I don't get this with my internet explorer but I don't want to use it! I much prefer my Firefox. I googled this problem and does almost everything, he said, but now I don't know what else to try. Someone answer please?

  The Solution worked for me last week - thanks! -but now the maddening proxy.allsearchapp.com/app/start/ is back! I do not understand how this thing can keep going into Firefox and make my homepage so easily without my permission. I have the feeling that it'll be back, and when it is I'm afraid I'll have to give up Firefox, despite many years as a satisfied user. (And why Allsearch would think that someone would want to use a product that is on your computer?)

• Firefox loads but will not do anything, impossible to get anything either, it started 3 days ago

  21/04/2013, I was on cox.net , which is my home page. had several things reduced to a minimum and using dvd r/w
  Player when icompleted did my work, closed. yesterday tried to start fire-fox when it loaded, screen was always full not able to get looking for funmoods or the home page, could not get the buttons. The problem still exists today. When he is able to use ao some games crashed message get flash player could send report and restart, now if get msg, do it again. I have Vista Hom premium and use fire-fox
  on cox.net

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls

• PIXMA MX922 test the right page, but will not print in black ink

  MX922 worked perfectly, and I love this printer. A few days ago, she didn't have to print a tax return online. Assumed there is some problems with the website then I just saved in pdf format. Then it again... fine color prints, but nothing in black. Test page for verification/nozzle is perfect, but did a cleanup anyway. Always the same. Comes with most WORD documents but I created 05/04/16 print - a desire for 4/6, I don't not created. So far, all of the Acrobat & html documents are affected. Have removed and added the printer, but that did not help. I've never been able to use as wireless so it is plugged into USB.

  MAC OS el Capitan. Recently installed Family Tree Maker and perhaps an update from MS Office.

  You will appreciate all suggestions.

  Thank you for your response. You are right... I didn't know there were supposed to be two black grids on the test page. I called technical support and we are working on that.

• just wireless printer to print a test page but does not print anything

  just installed my advent AWP10 printer all in one wireless, print a test page, and then I went to print an e-mail and nothing, when I checked "whats impression" it says 0. Did a diagnosis on her, said she was not shared with home networks, corrected this, but still nothing print or the print stack, is it OK to plug a usb cable to the rear, although its placement in the wireless? Maybe I could set up the usb cable, but also wireless, I don't know?

  Hello

  Thanks for posting the request in the Microsoft Community.

  It would be great if you can answer the following questions:

  1 have had any changes made on the computer before the show?

  2. What is the full and exact error message?

  Method 1:

  I suggest for the link and try to run the troubleshooter and check if it helps.

  Printer in Windows problems

  Method 2:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 3:

  I would also refer to the links to set up a printer:

  Install a printer

  http://Windows.Microsoft.com/en-in/Windows7/install-a-printer

  Install a printer on a home network

  http://Windows.Microsoft.com/en-in/Windows7/install-a-printer-on-a-home-network

  Setting up a wireless network

  http://Windows.Microsoft.com/en-in/Windows7/setting-up-a-wireless-network

  If the problem is not resolved, please provide more information to help you best.

  Thank you.

• home page together will not remain as home page "work at home Australia" has supported

  I tried to put my homepage "bigpond.com", but in addition to be OK for this session, the setting reverts back "work at home Australia" my setting is only good for this particular session.

  Please try to follow https://support.mozilla.org/en-US/kb/Preferences%20are%20not%20saved

• Dialog new material continues to appear, but will not install anything. Newdev.dll

  LS,

  Hi evertytime I start vista (ultimate) the new hardware found dialog appears.
  By clicking on ask not again this question doestnt seem to work because it is.
  Looking for the drivers can't find anything.
  Details reveal newdev.dll which is standard if new material im thingy right.

  Looking in my devices, there seems to be something USB (unknown).
  Disabling here is either to make a difference or uninstall.

  Its very annoying. No idea when this statrted. There are a few days perhaps.

  Any idea?

  Kind regards

  Machiel

  Hi Mac Shrike,

  Thanks for posting your responses to answers.microsoft.com

  Just to start immediately on what, in my view, would be the best steps is to update the chipset of the motherboard to the latest revision.

  'Install pipe1' points to a USB port, lead writing and information "root\scsiadapter\0000" brings to the controller integrated on the motherboard.  I'm not saying that these are defective, I want to just make sure that the Chipset and bios, and all integrated drivers for the motherboard are installed and the latest revisions of manufacturers.

  Once this is accomplished, and if the error persists, is there any software to virtual drive installed on this system.  If yes what can cause this error.  Try disabling them and see if the errors still occur.

  Let us know by referring to this, if we can help you further.

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• DVD player will not play anything but is listed in the Device Manager

  DVD problems

  My DVD drive is listed in Device Manager but will not play anything and does not appear on my computer. I tried to install the driver, but an error message says the driver installation failed.  I use Windows 7.  Any ideas?

  Tried this?

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  The problem occurred after you update or install something?

• Chapters change in the preview, but will not change after burning disc.

  When making a DVD with separate playlists chapter by chapter,-"project and an overview of the work" works perfectly.

  However, when the disc is in the drive at the time the arrow will hit the second button, playback begins immediately and when

  finished, he returned to the menu chapter as planned, but will not move past the second button to play anything.

  Is this something I'm doing wrong or the submenu would be defective?

  Select the menu (not a button), departed 'auto routing', then drag it as you wish.

  If the buttons are in good condition, you can use the automatic routing. If it's the only button behave strangely, I would just do the manual setting.

• Icons wiggle and move in the home screen but will not go to the next page

  Icons wiggle and move in the home screen but will not go to the next page

  You need to move to the edge and hold the button for a few seconds so he can move to another screen.