Create new user appears to work, but do not create a profile or a directory, logon fails

Similar Questions

• My computer crashed so could not remove CS5. Uploaded my CS5 disk to the new computer. Download worked but no update won't work and my raw files from my Canon 5 d Mark 111 is more open (they did previously).

  My computer crashed while I couldn't remove my CS5 Master Collection. I used my disk to load the program on my new computer. It worked but updates don't work nor bridge will recognize the raw files from my Canon 5 d Mark111. He acknowledged previously. Now, he says to convert to DNG, so I tried this but bridge is not to convert photos (even if it does not convert the raw files from my previous cameras).

  Try direct updates
  https://www.Adobe.com/downloads/updates/

• own original iPod, USB-Firewire used cable, works but will not go up in iTunes.

  I own the original iPod. used USB to firewire cable. A big mistake. now, it works but will not mount on iTunes. tried reset-no good version 1.5 OS

  I don't think there is such a thing as a USB-to-FireWire, not a single cable that actually works.  USB and FireWire are very different, including the power voltage which is used to load.

  So you're saying that he is no longer connects to iTunes, even when you use a FireWire cable and connect to a FireWire port?  Still, he does pay when you connect it to your FireWire adapter?

• Want to re - install elements 8 on the new computer, the serial number, but can not find the download button on the adobe Web site to do so.

  Want to re - install elements 8 on the new computer, the serial number, but can not find the download button on the adobe Web site to do so.

  Hello laetitiah

  Please visit: http://prodesigntools.com/direct-download-links-for-lightroom-3-and-photoshop-elements-8.h tml

  Follow the instructions on the page to begin your download... Use your serial key to activate it

  ~ Mandy

• Log: error message: "the service user profile service has no logon failed to load the user profile.

  Error message: "the service user profile service has no logon failed to load the user profile.

  Unable to connect.

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947215#letmefixit

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• Bing Dynamic theme work, but do not download new images of food

  I use Bing dynamic desktop theme on my Windows 7 PC.  I love the theme and images.  However, I had planned new photos to add to the slide show over time as new photos have been posted to the RSS feed.  My RSS in Outlook reader shows me that several new pictures have been published, but I don't see the pictures in my desktop theme.  What should I do to get these new pictures to download and see in my desktop theme?

  I use Bing dynamic desktop theme on my Windows 7 PC.  I love the theme and images.  However, I had planned new photos to add to the slide show over time as new photos have been posted to the RSS feed.  My RSS in Outlook reader shows me that several new pictures have been published, but I don't see the pictures in my desktop theme.  What should I do to get these new pictures to download and see in my desktop theme?

  Hi isomz

  Our colleague Ramesh Srinivasan MVP has released a fix for this problem today. Here is the link.

  Difficulty Bing dynamic Theme stops functioning after deletion of the temporary Internet files in IE

  Let us know how it works for you.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• BEFSR41 appears in ipconfig, but are not accessible

  Hello.

  Problem is described in the title. Just bought this new linksys router after reset my netgear router whenever I used a p2p program cause I've heard of linksys is "better". Now what? The configuration is very strange alrdy and it won't work at all.

  Have a SmartBox of T - Com, this router and a DSL Modem from Arcor. Before that everything works perfectly with Auto IP.

  Now my PC (2) is connected to the router and all two get their own IP address and the router appears as gateway 192.168.1.1, but it is not accessible, with this configuration on the CD for beginners, nor with the mask of browser.

  However, if I use the CD and it seems to scan my system, a bad LAN connection symbol will blink in the taskbar.

  It seems that the router is not completely broken, LEDs do not show anything out of use as well, but something is wrong.

  Any ideas?

  PS: I know there are tons of similar problems in this forum, but I have not found any case solved...

  O.K. Your modem assigns IP addresses inside 192.168.1. *. In addition, you have a PPPoE connection. I assumed that the modem is a modem/router device hybrid is smart enough to do a crossfeed PPPoE if you do a PPPoE connection.

  Otherwise, it could also be that your modem also has a USB port through which you establish a direct PPPoE connection. If your modem has a USB port not in use. If you want to use the ethernet port on the modem to make sure that nothing is connected to the USB port on the modem.

  I suggest that you test the following:

  1. disconnect the BEF of other devices. The son of a single computer to the BEF.

  2. open http://192.168.1.1/ and change address local IP of 192.168.1.1 to 192.168.2.1.

  3. on the same page change auto/DHCP internet connection for PPPoE settings. Enter your user name and password needed.

  4. now save the settings. You will lose the connection. The router reboots with the new IP 192.168.2.1. Open a command prompt window and type "ipconfig/release *" followed by "ipconfig / renew *" or restart the computer. The computer now get an IP 192.168.2.100.

  5. open the web interface of the router on the new address http://192.168.2.1/

  6. now wire the ethernet port of the modem to the internet port of waiting for a while. Click the router status page and check whether it connects or not. If it does not connect and see if it changes anything, or if you get an error message, press the button connect.

  If it connects, and you see an IP as the 89.*. *. * you saw in the ipconfig/all command in your last message, then you must have an internet connection now.

  7 if it does not and you do not get an IP address on the internet connection, try changing the type of internet connection to DHCP/auto on the main configuration tab. Save the settings. Return to the status page and check if you get a 192.168.1. * IP address as the internet IP address. If you get this IP address, check if your internet connection is working now or not.

• Backup and System Image say they work but are not

  Win 7 HP 64-bit running on desktop.

  Quick story: my mother just died. I had been using Windows automatic backup and backup system image, recorded on an external hard drive. When the computer was in the store, I tried to restore some files to the backup, but the majority of my files were simply not there.  I thought I had done something wrong or maybe all the drama with multiple accidents and my attempts to correct (before I realized that it was the motherboard) had somehow messed up.

  Current: New motherboard, has got a new hard drive so I was, reinstalled the same Windows 7 HP and all other programs.  Erase all of the external hard drive and backup of Windows files is represented.  He gave me no errors.  So I ran system image backup.  He also didn't give no error, but I noticed that the amount of free space on my external hard drive had not changed.  Properties of folder displays the WindowsImageBackup folder is 0 bytes.

  I tried to restore the backup of the files to be sure, it worked this time, but found the same problem as before.  When I browse for the files (or files), it shows the C: drive, and while a single folder (users) appears.  (The last time I think I had two other records.)  Within the users, I have some subfolders but not others.  Even for subfolders that arise, they lack the subfolders and files.  I don't see any specific model to which is registered or not, but I'm missing perhaps 80-90% of my data.

  To be clear, that the backup process has been totally standard - nothing personal, no more than one partition, nothing complicated - and I have not received any error.  Windows Backup and Restore thinks that everything is fine.  And yet, I have in fact a backup of files complete or apparently any system image.

  Any ideas on what is wrong?  Thank you!!

  Well, the new backup, in which I pointed out all the folders/files to save rather than let Windows choose, seems to have worked.  When I try to restore files, it shows me all the various files I have on the C drive and the files users (including Dropbox).  So my current theory is that something is not quite right about the Windows files chooses, since it must really understand all the same.  But at least it seems I found a way around it.  Thank you!

• Envy Touchsmart M6 Sleekbook screen works but is not lit

  Hey guys. I went to open my laptop yesterday and the power came the keyboard lights but the screen do not have. I was trying to understand if it is a physical problem or a software problem. It turns out that, when I plugged it into another monitor with a HDMI cable, the computer is always on and I can use it. Because it is a touch screen, I tried to use the screen to browse the Internet and it still worked. So, basically, the laptop still works and the screen works (because I can browse the Internet by using a different screen and the touch screen still works), but the screen itself is not lit. This sounds like a software problem or a physical problem? What ideas you guys have to fix? Thank you

  Hello dblack678,

  Welcome to the HP Forums! I hope you enjoy your stay!

  I understand that your computer screen is not lit. I'll do what I can to help you! To help you properly, I need the following information:

  1 the model number of the computer. If you need help to find this information, please see this site: find the model number of the computer

  2. the operating system. If you need help to find this information, please visit this site in order to determine the Windows operating system.

  3. have you installed new hardware on this computer, before the problem appeared?

  4. have you installed new software or drivers on this computer, before the problem appeared?

  However, since it is a new unit, I would just contact HP support. They will resolve the issue quickly, or service or replace this computer. You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide

  Please let me know if you have any questions or concerns. Thank you for choosing the HP Forums. Have a great day!

  Mario

• My old flash drive works but will not latest.

  I got several flash drives of various workshops I've attended that I can't access. I tried these on other computers flash drives and they work fine.

  It seems that my computer can not open these new flash drives.  I also have an external hard drive that I bought that my computer does not open but will be other computers.  It's funny because my computer will open an old flash drive I've used for years, but not of these 'new' flash drives.

  I have tried to install the latest updates, downloading the required driver (but failed), uninstall the usb ports and all of the recommended Microsoft fixes, but I still can't get my computer to open these flash drives.

  Please, please, please, if anyone can help I'd be very happy.

  Hello

  1. What is the brand and model of the computer?
  2. Do you have an error message when you connect the flash drive to the computer?
  3. Did you recent hardware or changes to the software to the computer before the show?

  You could deal with this issue because of a damaged or out-of-date USB port driver. I would suggest trying the following steps and check if it helps.

  You can refer to the suggestion of Azeez N in the following link and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/flash-drive-not-detecting-in-Toshiba-laptop/f1031a5e-3fc0-4FFB-A08B-2bd015177287

  If the problem persists, you can run the following fix - it tool and check if it helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  You can also see the following for more information Microsoft article.

  My drive does not appear in Windows Explorer

  http://support.Microsoft.com/kb/330140

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.

• My computer laptop monitor works, but does not have the windows desktop.

  original title: my laptop monitor works, but the windows on desktop are not displayed. The desktop appear correctly in safe mode but not in normal mode. Any suggestions?

  Running windows XP media center edition on an HP laptop. AMD Turion 64-bit dual core.

  Hi Prohoss,

  Follow the steps in this document to perform a System Restore. You will need to start safe mode to perform the steps.

• DVD works but will not play a CD - Vista

  I tried to remove the filters from the registry.  I have download all the drivers from Dell.  It used to work, but I haven't used in a while.  I put a DVD in the drive and it loads immediately.  For a while when I clicked on the drive, he asked for a CD.  However in the last couple, the icon changes as he sees a Cd in the drive but cannot read.  It shows 0 files it contains.  When I put a CD I had burned some time ago, it shows how much free space on it, but does not display the files it contains.  I tried music, games, and files.  Any ideas short of wiping the entire computer and start over?

  Hello

  DVD player & recorder and CD player & burner are really 4 separate devices in one case is not
  unusual for a work and not the other.

  Please do all the below in the order listed as it is often the complete process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows open will not close and the computer does not except in safe mode. The mouse works, but can not open a file or a program.

  I ran the twice successfully system restore, but that did not help. When a window is blocked, hit CTRL-Alt-Del shows an error message "failure of Security Options. I use Vista. Open windows on the desktop were often not well closed for months, but now the computer freezes as soon as I opened the first window. Busy circle is present. Mouse still works but can't do anything for files, etc.

  Hello

  1. don't you make changes to your computer, after which the issue started?

  Follow these steps and check if the problem persists.

  Step 1:

  If it works in safe mode, I suggest that you can start your computer in a clean boot State and check if the problem persists.

  Note: Follow step 7 to your computer as usual.

  Step 2:

  You can perform disk cleanup to clean unwanted files on the computer.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

• I download a pdf file of my e-mail and it goes to microsoft works. but does not open the files

  I had some pdf files sent me don't download it except in microsoft works. but then the files will be open not because they say it not supported. These are important files, I need it now

  Work will not read a PDF file, you need a PDF reader.

  Adobe Reader
  http://get.Adobe.com/reader/

  Foxit Reader
  http://www.foxitsoftware.com/PDF/reader/

  Adobe is more "well known", but Foxit is much lighter and my personal preference.

• PDF viewer code works but is not admissible as in Dreamweaver

  Hi, I use this code in Muse and it works but it is not admissible.

  
  

  " < object data = ' http://www.2agroup.gr/assets/onirolithi.PDF "type =" application/pdf"width ="100% "height ="800px"> "

  < p > it seems that you do not have a PDF plugin for this browser.

  No biggie... you can < a href = "resume.pdf" > click here for

  Download the PDF file. < /a > < /p >

  < / object >

  Use it in > page properties > head works but not adapted.

  Use it as paste html in a page works but not adapted.

  Use it in Dreamweaver works fine.

  What I am doing wrong?
  

  Could you help her?

  Tony
  

  I suggest to export as html in DW site then add this code and publish as a site online to verify the behavior.

  Thank you

  Sanjit