32-bit Windows VISTA update problems

Similar Questions

• Windows vista update problems.

  Downloaded PC update of windows vista. PC rebooted and got stuck at step 3 of 3 0%. PC is currently caught in a loop with the message "stage 3 of 3 0% ' appearing before restarting again. I tried repeatedly pressing F8 but it has no effect. When the option to start in safe mode keyboard does not therefore computer starts in normal mode and continues the loop. have tried to use the vista installation disc however when the keyboard message "Press any key to boot from cd/dvd" does not and PC continues to start windows normally and continue the loop. currently have LIKE rock installed on the computer and can access the configuration options and startup of vista to F2 and F11 as a result. keyboard works fine when using these options. I have read the previous posts and tried the suggestions not dying of success for the keyboard however does not when confronted with options for safe mode and restart using cd/dvd. I can't access anything before the login screen, so the Task Manager and the start menu options are not put at my disposal. currently using another computer on the same network as the PC with vista problems. is that what I can do to break the loop or shut down the computer restarts itself?

  Try to get a dchange the boot order in the BIOS and repaired a boot with the drive below:

  Download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista update problem

  I'm running on Windows vista SP1. (I know there is a SP2, but can't get it)

  If I try to update via windows update I get an error: Code 80240016. If I try manually when I get to the posting form, I can not get this page to load, I get another error. Also I can't get updates from Toshiba. I have a great internet connection, update is the only thing that does not work. I recently lost the ability to play music from itunes, but the player still works, so I know this isn't a sound problem. I've had the computer for a little over a year now and it started about a month ago and so far windows customer service isn't being helpful. I tried a number of patches online, but none work, can anyone help me? What could be to keep me update Windows and Toshiba? Also, I tried disabling all firewall that I know I have, and that doesn't always.

  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.
  http://support.Microsoft.com/kb/957307

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Full service pack 2 for Windows Vista update problem

  I'm bad havivg update to service pack two for Windows Vista Edition full. After I download and install the package it says then return back to the previous windows instalation. This whole process takes seven or eight hours. Then, I get so sort of little box on a black screen with some kind of error message and code. The last time I did this update I have re-installed a clean windows all over vista. So I lose some files. Then, Windows stores some of the files on the instalation of windows prior to an old file of windows. So what should I do to solve this problem? Is there a quick fix to this problem? Anybodys help is appreciated.

  Bye, narrating

  Hello Michael,

  Thanks for your help, but I downloaded the utility Windows install cleanup a few days ago and installed it. Today, after I first started my computer, I got a notification down in the lower right of my screen saying new updates are available. I clicked ok on update for service pack 2 and installed successfully.

  Bye, narrating

• Windows Vista update problems - error 0 x 80041001

  I spent hours/days to try to overcome the problems of updating Vista on my Dell Inspiron 1525 running Vista 32 with SP1 is installed.  I have installed the installation of update tool, disabled my firewall and Norton AV, even tried a Windows Vista SP2 Standalone update.  Nothing works.  I get an error code 0 x 80041001 (generic failure).  My third party software consists of Norton, Sage Instant accounts, Xerox and HP print drivers.  All my other software is a MS OFFICE 2007 with Visio and Project Manager.

  I even downloaded and run the Fixit software on the MS. support site  Still no go.

  Can help somebody out there!

  Thank you very much
  Len

  Hi LenB10p,
  Try this,
  To manually install the hotfix on the SMS site server, follow these steps:

  1. Create a folder in a location that your SMS site servers can use.
  2. Run the following command:
     Sms2003-RTM-KB837387 - X 86 - ENU.exe / x

     Check out the fixed files in the folder that you created.

  3. From each of the servers in site main SMS in your environment, use an account that has administrative credentials to log on your site server.
  4. Quit the SMS Administrator console.
  5. Stop all SMS services.
  6. Stop the WMI service.
  7. In the SmsRootFolder\bin\Platform folder, run the following command:
     regsvr32 /u Smsprov.dll
  8. Copy the Smsprov.dll file that is updated from the network share or disc in the SmsRootFolder\bin\Platform folder.
  9. In the SmsRootFolder\bin\Platform folder, run the following command:
     regsvr32 Smsprov.dll
  10. Restart the WMI service.
  11. Restart the SMS services.

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• WINDOWS VISTA UPDATE PROBLEM AFTER REINSTALLING

  I reinstalled Vista, resolved all the problems & updates has been working well until the moment when SP2 was installed successfully. I then received a message that the updates would not check until I installed agent 7.6.7600.256.I did this & it installed successfully. My problem now is that update work simply & races, apparently never find or stop any future error message, just past constantly.

  Install manually in advance KB3078601, KB3109094, KB3145739, KB3164033 and KB3168965. Download links:

  http://Wu.krelay.de/en/

  A new update must be installed manually may be added on tomorrow's patch day.

  The value of the automatic updates to 'never check updates' and restart Windows before installing.

  https://www.YouTube.com/watch?v=0HBBuBbf4Ws

• Problems with Windows VISTA update (error code: 9 c 47 of the 800070002, D 80024200)

  original title: problems with Windows VISTA update

  I'm using Windows Vista (SP2). Windows update is not able to update the following updates on my system. Whenever I get these error messages.

  1. 9 47 code
  2. Code 800070002
  3. Code D 80024200.

  Is there a resolution to do the same thing?

  Hello

  Did you change your computer?

  I suggest you to follow the methods and check.

  Method 1:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 3:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Windows vista update 80246008 error code

  Windows vista update 80246008 error code

  You must be logged in as an administrator to perform these steps.

  If you receive Windows Update 80246008 error when downloading updates, you might need to change the (BITS) Background Intelligent Transfer Service or the Windows event log service settings and restart each service.

  To change or restart the Service (BITS) Background Intelligent Transfer

  1 open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  2. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3 right-click the Background Intelligent Transfer Service (BITS) service and then click Properties.

  4. under the tab general , next to Startup type, make sure that Automatic (delayed start) is selected.

  5. next to Service status, check whether the service is started. If not, click Start.

  To change or restart the Windows event log service

  1 open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  2. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. right click on the Windows event log service and then click Properties.

  4. under the tab general , next to Startup type, make sure that Automatic is selected.

  5. next to Service status, check whether the service is started. If not, click Start.

  If the problem persists after you follow the steps above, go to the Windows Update Support Center website to request support by e mail. https://support.Microsoft.com/OAS/default.aspx?Gprid=6527&St=1&wfxredirect=1&SD=GN>

  OR

  Try here and see if Russell Pope is available, if not, try another available technology.

  http://supportservices.Microsoft.com/support/services/windows_update>

  UTC/GMT is 10:53 on Sunday, December 25, 2011

• Vista update problems

  A WEEK ago, I HAD OF PROBLEMS UPDATES.IT DOWNLOAD & INSTALLATION RESTERAIT at 0%, I FOLLOW SOME IDEAS, HELP & IT SEEMED WORKING HOWEVER THE LAST UPDATE FINALLY INSTALLAIT ON THE 17th that'S GOOD what HE SAID LAST updates INSTALLED ON 17, BUT WHEN YOU click TO VIEW HISTORY of UPDATE I HAVE MORE RECENT UPDATES OF SECURITY ESS. DAILY & SOMETHING ELSE. THEN WHY does STILL SAY AFTER VERIFICATION OF UPDATES, INSTALLATION updates SHE WILL see THE GOOD TIME & DATE TO the LAST TIME HE CHECKED a DAY & SAID ALWAYS UPDATED ON 17 updates?

  Don't know.

  http://Windows.Microsoft.com/en-us/Windows-Vista/updating-your-computer

  • How will I know if my computer is up to date?

  • Get updates for Windows security

  • Update automatic UnderstandingWindows

  • Keeping computers on a network up to date

  • Repair or update a driver

  • Defender of the KeepWindows to update definitions

  • UpdateMicrosoft Office

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Windows Vista updates (12 April 2010) broke all the desktop shortcuts

  On 13 April, I fist notice this problem. I managed to it is resolved according to restore my computer to a previous point prior to the windows vista update have been installed. I didn't create a new restore point and also forgot to uncheck "automatic installation of windows. A few days later, the same problem after updates have been installed again on April 15. Unfortunately, this time I don't have a restore point previous April 15. So, I restored it on next day 16, but not resolved the issue. So I uninstall all vista windows update installed on April 15 but did not help either.

  Fortunately it affects only an admin user (user account that run windows update) all users are very well.

  Any suggestions to solve this problem, much appreciated.

  Kind regards

  lmaestro

  SOLVED. It is a Virus. A villain. For more information, see URL below:

  http://social.answers.Microsoft.com/forums/en/vistaprograms/thread/039ceca1-c81f-4136-8c04-bf13c0378495

  I followed the comments posted by "lilvtboiraver" about the "Regetry Exchange" and it solved this problem.

  Thank you

• I'm Zenith one 733F error Code when I try to install Windows Vista update to SQL Server 2005 (Service Pack 2 KB970895).

  I'm Zenith one 733F error Code when I try to install the latest Windows Vista Update, which is an update to SQL Server 2005 (Service Pack 2 KB970895).  This update has failed several times now.

  I followed the advice given in a separate post in this forum at Ramer49 to perform a selective startup with msconfig to try to run the update with all Microsoft Services disabled.  This does not solve the problem.

  I spent reviewing the logfile under C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB970895_sqlrun_sql.msp.log.  The problem highlighted is that the Services of Services SQL2005 database program did not start.  Here is an excerpt from the log file...

  Product Installation status
  Product: SQL Server Database Services 2005 (MSSMLBIZ)
  (Previous) product version: 3077
  Version of the product (Final):
  Status: failed
  Log file: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB970895_sqlrun_sql.msp.log
  SQL Express features:
  Error number: 29503
  Error description: error MSP: 29503 The SQL Server service could not start. For more information, see the

  I tried to run the problem file (SQL Server MSSMLBIZ) directly by using the Windows administrative tool, but the file does not seem to start successfully.  Event Viewer log contains an error with event ID = 823.

  I don't know what to do next.

  Can someone help me?

  Thank you.

  Take a look at this link as it covers a way to fix this problem. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• We tried to upgrade our 32-bit windows vista system to Windows 7 32 bit

  Separated from this thread.

  We tried to upgrade our system to 32-bit windows vista to windows 7 32 bit and find no right answer to what we have to do to upgrade to windows vista 32. So far, our experience is our head is ROTATING and can someone help us?

  First of all, make sure that your PC meets the requirements of Windows 7 - system Windows help

  You can buy Windows 7 from one of the major retailers who still like mainline, new egg, or Tiger Direct - Amazon but none is smaller that that if you want to be sure to get the real and not renovated or eBay!  If in doubt ask here before you buy, read the comments of the sales page for the experience of others.

  Once you have the disc, put it in the drive to make an update install with Windows 7 .  If you have a Vista factory install I would firstly follow these same steps to Clean Up Factory Bloatware that will optimize for a better upgrade.

  If this facility is not satisfactory, then do the vastly superior clean reinstall Windows 7

• Printer problems due to software on my windows vista desktop problems

  They told me that I have a software problem on my windows vista desktop, because - my printer print test page, but seems to have a communication problem with some of the jobs I want to print. I can't right click and print. Someone at - he heard of this problem and might be able to give me some advice?

  Hello

  1. What is the exact error message?

  2. What is the brand and model of the printer?

  3 have there been recent changes made on the computer before the show?

  Please follow the steps below and get back to us with the results.

  Method 1: Run the Microsoft fixit and check if it helps.

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/en-us

  Method 2: R the print service spooler and verify.

  You must be logged on as administrator to perform these steps.

  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.

  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. right-click on the print spooler service and then click Properties.

  d. on the general tab, next to startup type, make sure that automatic is selected.

  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Method 3: Update the printer drivers and check.

  Find and install printer drivers in Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

  Update drivers: recommended links.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  For more information, see the link:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Let us know if it helps!

• Error Windows vista update 9 c 48 during the installation of Internet Explorer 9

  Original title: windows vista update 9 c 48 error

  I tried several times to run the update that was trying to install internet explorer 9, but kept getting error 9 48

  May I ask why?

  Hello

  1. are you able to install the updates without any problems?

  Method 1: Please follow the steps described in the article mentioned below.
  Solve the problems when you can't install Internet Explorer 9:
  http://support.Microsoft.com/kb/2409098

  Method 2: If the above method does not work, follow the steps listed in the article below.
  How to install or uninstall Internet Explorer 9?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9

• Windows vista update 3 of 3 will not set up, computer continuously, stop and restart; Unable to access computer

  Windows vista update 3 of 3 will not set up, computer continuously, stop and restart; Unable to access computer

  The link below has options to solve your problem of loop.

  http://support.Microsoft.com/kb/949358>

  04:17:0407/17/11