Create properties

Similar Questions

• Create properties of as3

  Hi all

  I have

  < XY = "0" mx:Canvas = "0" width = "100%" height = "100%" id = "prepBlobs" / >

  There are no properties in this component.

  I want to add a new component now:

  var itemPicX:Bitmap = new bitmap;

  var wrapperX:UIComponent = new UIComponent();
  wrapperX.addChild (itemPicX);
  wrapperX.name = "first image";
  wrapperX.id = "itemPicX";
  
  Application.application.prepBlobs.addChild (wrapperX);
  Application.application.prepBlobs.itemPicX.visible = true;

  This operation fails with the error: #1069 Error: itemPicX property not found on mx.containers.Canvas and there is no default value.

  What I am doing wrong?

  I did all this because I want to loop all of the elements within the canvas. I want to create at the beginning of the loop and remove all the using the prepBlobs.removeAllChildren to the end of the loop.

  Christopherek

  I have a better idea for you,

  Why don't create you your own pure Descendant in AS3 canvas class and put any logic inside?

  something like this:

  SerializableAttribute public class YourCanvas extends Canvas {}

  public void addStuffToCanvas(stuff:*):void {}

  }

  public function cleanCanvas (): void {}

  this.removeAllChildren ();

  }

  public function takeASnapshot (): BitmapData {}

  Returns the snapshot data;

  }

  }

  If you think this message responds to your question or assistance, please mark respectively

• Create Non-volatile step properties in TestStand

  Hi Ppl,

  I created a type of stage custom, which has a void edit step. The step of void edit allows the user to create custom stage properties. For example, the user will be able to create properties such as step.custom_property. These properties are volatile, which means once you close the file in sequence, they are lost. Are there

  anyway to retain the properties of the step even after saving them?

  Thank you

  Sirot

  Sirot,

  Another way to add properties with an instance of the step is to add a container of unstructure property the definition of step type.  You will add then all your custom properties under the ownership of unstructure container.  For example, in the definition of step type, you can add a property's container and call the CustomProperties.   Right-click on the CustomProperties property and select Properties.  In the Properties dialog box, click the Advanced button and select flags. In the flags dialog box, check the indicator PropFlags_UnstructuredProperty and check the option "Reset Flags in all loaded Instances of the Type" and click OK in all the dialog boxes.  Modify the module for the lower level edit add custom under Step.CustomProperties properties.  Don't forget increment the counter to change the movie file.  Save and reopen the file of the sequence should persist custom properties.

  Jose

• Choose/Create folder path

  So far, I am able to choose a path, but not the back. I use LV2010. Is there some vi that I did not find which allows you to access a folder instead of choosing a file?

  I want the user to choose the folder to save the files to the beginning of the program, and then the program will create a file with a time stamp and the data read. So the first part is missing

  Hi Livermor,

  Thanks for the quick response.

  On the "userid_path_subvi.vi" go to the block diagram.

  If you click on the 'Record' control that you have created--> properties--> select "files" under "selection Mode".

  Hope that helps!

• How to keep my entire office when I create a new user account

  I just created a new user account to solve a problem with my account live mail, but I want to keep my old office display.  How to achieve this?

  Hello

  Thanks for your posting in Microsoft Community

  What type of account you created?
  Is it a limited account or administrator?
  If sa is an account limited, you will need to log in as administrator account and you must give permission to access Office

  If it's an administrator account you can access the desktop computer from the old account to which you want to access by going to
  my computer > c drive > user > desktop and copy those file on your desktop or other disc

  Account limited, you must log on as an administrator and give permission to access desktop of type lusrmgr.msc in the box RUN and press on into the House.

  Double-click the users folder > right click on the new account is created (have you creat) > properties > click on Member of > add > administrator...

  And trying to hold the Office to your account

• If the RequestLocale.properties file included in the pipeline... ?

  Hi all
  
  
  I created a RequestLocale.properties file... which would be included in the Pipeline services... And is it mandatory to create the RequestLocale.properties Java class file (IE I just created .properties file without creating a Java class)... ?
  
  
  Thanks in advance,
  Laurie Bovlla

  for the 2nd part of your question,.

  No - it is not required to create a java file - unless you want to replace/add a method.

• Star Trek: Starfleet Academy has graphic distortion when the game takes place. It looks like its operation in 16 colors.

  I installed it under 7, I've done all the Troubleshooting compatibility mode, but it appears always looking like he works in 16 colors.

  There may be a little late, but for other people with the same problem, this is how I got it work on my Windows 7 (x 64) system:
  1. install (there will be graphic distortions during installation)
  2. go to the directory where the game has been installed
  3. right click on "sfad3d.exe"-> send it on the desk (link)
  4. do a right-click on the icon Office created-> properties-> compatibility-> choose "Windows XP (Service Pack 3)"-> OK
  5 start from desktop icon

  Optional: If she still distortions can install DirectX9.

  I hope I could help,
  Thomas

• The balance of time

  Hello

  I tried to create properties at the time of the balance in an existing cube of ASO (I made a copy of the cube running) in 11.1.2.1. I've looked at this the following:

  -Defined as accounts and time Dims

  -All dim associations exist

  -Define an a/c as TBLast and Skip Missing member

  When you post, I get this error. Any ideas I might be missing here

  Error in adding the ABC member attribute

  No time dimension defined

  UK

  I solved it, the trick was to put the temporal dimension 1 in the order of sorting and then accounts dim 2 in the sort order. Maybe it's how to be ASO, but with BSO sort order has no impact on SDR (correct me if I'm wrong).

  After reading lots of documentation, I consider not anywhere, maybe it is written somewhere, but I couldn't lay my hands on it.

• How to avoid attachment with code e-mail

  Hello
  
  I wrote a code for sending email notification. Code works very well as e-mail is triggered as expected, but when the mail is received an attachment called attzurlm.dataccompanies. give pointers how to remove this attachment.
  
  PFB code
  public String sendEmail (list < String > recipientList, subject to the String, String message, String to, String cc, String logoPath, Logger LOGGER) {}
  
  try {}
  functionName = "sendEmail ()"; "
  Set the smtp address host
  Properties props = new Properties ();
  Useful util = new Utils();
  Extraction of search values
  tcLookupOperationsIntf lookupIntf = (tcLookupOperationsIntf.class) Platform.getService;
  String smtpHost = util.getLookUpValueByKey ("LookUp.EmailInfo", "CG_EMAIL_SERVER", lookupIntf, LOGGER);
  LOGGER.debug (functionName + "SMTP host name:" + smtpHost);
  props.put ("mail.smtp.host", smtpHost);
  props.put ("mail.smtp.auth", "false");
  
  create properties and get the default value of Session
  A session = Session.getDefaultInstance (propellers, null);
  session.setDebug (debug);
  
  create a message
  Message msg = new MimeMessage (session);
  
  Check if the cc is required
  If (cc.length ()! = 0) {}
  InternetAddress ccAddress = new InternetAddress (cc);
  msg.setRecipient (RecipientType.CC, ccAddress);
  }
  
  set the from and to address
  InternetAddress addressFrom = new InternetAddress (from);
  
  msg.setFrom (addressFrom);
  
  InternetAddress [] addressTo = new InternetAddress [recipientList.size ()];
  
  for (int iCountMail = 0; iCountMail < recipientList.size (); iCountMail ++)
  {
  addressTo [iCountMail] = new InternetAddress (recipientList.get (iCountMail));
  }
  msg.setRecipients (Message.RecipientType.TO, addressTo);
  
  Definition of the object and the Content Type
  msg.setSubject (subject);
  msg.setText (message);
  MimeMultipart multipart = new MimeMultipart ("related");
  first part (html)
  BodyPart messageBodyPart = new MimeBodyPart();
  String htmlText = "< br >" + message + "< BR > < BR > < P align =------"left\"> ' + ' < br > < img src =------"cid:image\"> < br > < br > ' + '< /P >";
  messageBodyPart.setContent (htmlText, "text/html");
  multipart.addBodyPart (messageBodyPart);
  messageBodyPart = new MimeBodyPart();
  MSDS of DataSource = null;
  try {}
  SDS = new FileDataSource (logoPath);
  } catch (Exception exe) {}
  LOGGER.debug ("function: + sendEmial: logofile path is missing" + logoPath);
  }
  messageBodyPart.setDataHandler (new DataHandler (SDS));
  messageBodyPart.setHeader ("Content-ID", "< image >");
  multipart.addBodyPart (messageBodyPart);
  
  put it all together
  msg.setContent (multipart);
  
  Transport.Send (MSG);
  LOGGER.info ("Email sent to the recipient:" + recipientList);
  } catch {(MessagingException msgExc)
  LOGGER.error (functionName + "error occurred when sending email:" + msgExc);
  msgExc.printStackTrace ();
  return to 'ERROR ';
  
  } catch (Exception exception) {}
  LOGGER.error (functionName + "error occurred when sending email:" + exception);
  exception.printStackTrace ();
  return to 'ERROR ';
  }
  Return "SUCCESS";
  }

  Check if the sons of logoPath to attzurlm.dat, if so, attach the file.

• Open the top of page to width magnification

  There are links to three forms on www.banburytennisleagues.com/forms/

  I try to make them open at the top of the page to width magnification

  First of all, I tried to create properties-> initial view--> magnification-> adjust the width - which opens in fixed width, but in IE opens at the bottom of the page for the next, I edited the hyperlink add #page = 1 to the end

  This changes the initial view to full page

  Anyone know the answer? If so, I would be very grateful to hear about them

  Thank you

  Nick

  You did not mention the version of Acrobat you are using. Acrobat X is having a bug with the initial view settings. Not sure whether the bug is fixed in the 10.0.1 release. It was reported just before the release of the 10.0.1. Only the 'real size' and 'Default' works perfectly. All other options like width fixed, fixed height and the zoom percentage will be open the second page of the document. In your case the formula is to have a single page, it takes at the bottom of the first page. I think you use Acrobat X.

• Flash 9 and 10 serious limits

  Hello!
  
  I've been applications flash development with AS2 for years. While Flash 9 and 10 are great, for the first time in the history of Flash, it was impossible for me to do something important that I was once able to do with previous versions.
  
  In Flash 8, I've developed a complex system but wonderful to run in order to dynamically load my classes. As you know, the classes have been stored in the "global" object in previous versions. In order to store my classes in a single swf file in complex projects, I used the key word 'global' in all my actionscript code so that I could always decide WHERE I wanted to include a particular class.
  
  Of course, I had to create a special class to load all other classes. For example, the following code
  allowed me to load a package of classes:
  
  myClassLoader.load ("com.mynamespace.Map");
  
  The ClassLoader was a handful. Basically, she carried out the following tasks:
  
  (1) convert the string 'com.mynamespace.Map' to 'com/mynamespace/map.swf '.
  (2) load the file "com/mynamespace/map.swf".
  
  Of course, the file "com/mynamespace/map.swf" contained the class "com.mynamespace.map" that is why my class loader has been check if _global.com.nymespace.map has been set.
  
  (3) once the _global.com.nymespace.map is set, my class loader look for the following static properties:
  
  public static var PARENT_S: String = "net.tanoa.Component";
  public static var TANOA_REQUIREMENT_A: Array = ["net.tanoa.Geodesy", "net.tanoa.Component"]
  
  At this point, you are probably understand where I'm going.
  My class loader is looking for all mandatory classes and if they are not already defined, these classes will be charged as well. Here, you must understand I have single SWF can contain many classes actually, but these classes are 'rough' (thas is not there's legacy at this point)
  
  (4) for all THE required classes are loaded, my class loader must perform another important task: to connect classes prototypes in order to dynamically generate the legacy. As you have already understood, I use the static property "PARENT_S" of all classes of the to do.
  
  (5) when the inheritance structure is built, the class loader check if there is no initialization to run on each class (there was a standard name for my initilaization method in all categories) this was necessary in order to create properties by default of certain classes (when these default properties are instances of other classes for example) I don't want to make it more complicated than necessary, but there is also an optional "initalization_priority" propertie to determine what classes need to be initialized first.
  
  Well at this point, I hope you understand the main ideas. I have a lot of classes in several swf files. There is NEVER any duplication of all classes. Projects can reuse the same classes and, therefore, the same files stored in the cache. It is possible for me to create a virtual Windows application and load an XML file in which I determine what "components" are needed, and they will be loaded only when necessary.
  
  As far as I know, I'm the only guy in Fiji (and the world) that has developed such a system.
  In order to avoid the inclusion of my classes in more than one swf file, I had to use the keyword "_global" in my code (it's a pain in the *) and I could not take advanatge of the compilator check-up or special keywords like 'extends' etc... It was the big price to pay.
  
  I'm really sad that Flash 9 and Flash 10 do not allow us to deal with the legacy dynamically. Technically, the Flash 9 and 10 are very limited, it's as if it was impossible for a program that runs in Windows to load a "dll" file
  
  In my opinion, the next generation of flash applications should allow us to find a solution to this problem.
  
  As long as I fear, if I can't continue to do what I did before, that means that I have a big problem.
  
  Fijiflasher

  Mathieu,

  > Sorry Sir, I think that you don't understand, it's maybe because I
  > am a French speaker.

  No worries! :) We will understand it.

  > I want to use Flash 9 and 10 new capabilities
  > (compression, decompression, arrays of bits, etc.), I need to migrate
  > Flash 9 and 10 and I don't want to continue with Flash 8 as
  > actionscript 2.

  It helps me to have a more clear idea; Thank you!

  > With AVM2, I can't do what I could do before. To put it simply,.
  > I can't migrate my Flash 8 for Flash 9 architecture.

  Okay, because ActionScript 3.0 does not support the object _global.

  > When I'm talking about Flash 9 and 10, everyone understands that
  > I make reference to ASM2 I hope.

  This is why naming conventions are so important! :) Strictly speaking,.
  Flash 9 and 10 should be called Flash CS3 and Flash CS4, respectively - if
  you are referring to the programming tool. If you're referring to execution
  Instead, then they should be called Flash Player 9 and 10. In any case, all the
  discussion applications support all versions of ActionScript
  that exists, so it is important to point out in no uncertain terms that
  you mean that the virtual machine.

  > I do not understand why it is so difficult for everyone to understand
  > ASM2 is a serious limitation for "serious" programmers (I mean
  (> those of us who are really complex development applications)

  Honestly, I think the answer to your question is Flex, simply because
  Flex AS3 applications (and by consequence AVM2). Flex is specifically * focused * to
  serious programmers and complex applications, the level of the company.

  > we don, t want to reload the packages all the time, its quite
  > inefficient and takes forever to compile.

  I don't know, but it looks like that your intention is to avoid the compilation
  duplicate unnecessarily API in more of a SWF. So I * think * something
  like that might be what you are looking for:

  http://exanimo.com/ActionScript/Flash-CS3-and-exclude-XML/

  > I don't, t want to publish AS2 in the newest player. I need to spend
  > to AS3.

  Understood, and you will notice a performance gain.

  David Stiller
  Adobe Community Expert
  Dev blog, http://www.quip.net/blog/
  "Luck is the residue of good design."

• Types of nodes DRM

  Following my previous post, I want to create a large hierarchy of the type where I could have 3 basic levels, but they are arranged like this for example:
  
  Personal finance
  -Assets
  -Physical assets
  -Home
  -Holiday home
  -Car
  -Bank accounts
  -Audit
  -Savings
  -Brokerage accounts
  -Citi
  -401k
  -Debts
  -Credit cards
  -Citi
  -Student loans
  -Loan 1
  -Loan 2
  -Mortgage loans
  -Mortgage 1
  -Mortgage loan 2
  
  As you can see, the nodes would certainly associated with different properties with them, what I would do is to create a hierarchy that is like this one, where can I get different NodeTypes associated with each leaf node. I don't know if I'm doing something that really makes no sense, but I would like to understand how I could work with Hyperion DRM for it.
  
  Any help or a response is greatly appreciated

  I do not understand your question completely, but I guess you want to separate your property sheet for the properties of the Member node node.

  I don't think that NodeTypes is the best solution for this. Someone can correct me if I'm wrong, but from a point of view design I prefer keep NodeTypes specific hierarchy. For example, the accounts and the NodeType entity for my accounts and the entity hierarchy.

  In your case, I list the properties you need for your leaf-level members create properties accordingly that concern only the leaf level members. You can use a method or property RWDerived and use formulas on it. A simple example, if you want to insert a value to a member if it is one sheet on Essbase - you can create a formula that starts something like: if (indicator of sheet is true--> can assign ABC to this property value and leave empty if not)... I would use a little logic like that). I would also like it keep a property RWDerived just in case you need to crush them.

  For a more organized design, I would then create a category of property which has specific to your members to leaf-level values so that join them all out and make the appropriate changes.

  There are of course a number of other ways to apply the same thing, but from what I hear from you, this comes to my mind. I hope this helps.

  -Adi

• How do I dynamicaly create TestStand properties when loading the limits of an Excel file using the property loader?

  Hello

  I need help using the shipper of the property. I have an excel file that contains a bunch of properties, and the properties change quite often. I want to be able to load a picture of the excel file properties by using the shipper of the property and create these properties in Teststand programmatically. It is a sample of the file I want to import: when I tried the charger of the property, I got an error, because the properties did not exist. So, how can I create them as they load?

  LIMITS OF DEPARTURE
  	Value of the variable
  	Value of the variable
  LowLimits	10 20 30
  PinNumbers	0 1 2
  	Value of the variable
  LIMITS OF THE END

  Thank you

  Ayman

  Thanks Ric, Ray. Both of your comments, I was able to do that the tool works exactly as I want. The final version of my custom tool is attached.

• Create cursors programmatically with custom properties

  Hello!

  I have problems creating cursors by programming in Labview 2009. Basically, I have an image that is rendered as a table. When you press a button, I want about 7 sliders to appear on the graph of the intensity of my image. I then want to read values from the sliders (z-values) and do some calculations base with them.

  The Labview help says to use the CursorList property to create sliders so I understand. I am trying this now, as follows:

  Create the property node and the link to the image. Choose the property of CursorList. Right click and create constant. Then I'm trying out the different sliders with the index of table vi, change their names to 1-7. Then I thought to put their back with the cluster vi version, but it does not work.

  In the future, I would like to set several properties of each slider (and not just the name). What is the right approach for my problem? I did a search on the topic, but nothing useful came. Please point me to a thread that I might have missed.

  Is attached a screenshot of my problem... How to create several cursors at a time by programming with some properties tuned to my taste?

  Thanks for your help!

  Chris

  Kokomoking wrote:

  Hello!

  I have problems creating cursors by programming in Labview 2009. Basically, I have an image that is rendered as a table. When you press a button, I want about 7 sliders to appear on the graph of the intensity of my image. I then want to read values from the sliders (z-values) and do some calculations base with them.

  The Labview help says to use the CursorList property to create sliders so I understand. I am trying this now, as follows:

  Create the property node and the link to the image. Choose the property of CursorList. Right click and create constant. Then I'm trying out the different sliders with the index of table vi, change their names to 1-7. Then I thought to put their back with the cluster vi version, but it does not work.

  In the future, I would like to set several properties of each slider (and not just the name). What is the right approach for my problem? I did a search on the topic, but nothing useful came. Please point me to a thread that I might have missed.

  Is attached a screenshot of my problem... How to create several cursors at a time by programming with some properties tuned to my taste?

  Thanks for your help!

  Chris

  Do not build Bay cluster. Just use build array (programming-> table-> table of generation). Who should take care of your cut wire. When you use the cluster table version, it builds your cluster in ANOTHER group that is not what you want.

  

  The table of index VI is also extensible (click on the lower part of it and drag). In this way, that you don't need 8 of them on your drawing.

• I have Acrobat Pro 10, when I installed the CD player, it has affected the way I was able to move text boxes when I create a form of gall, he has also affected my ability to release and change the properties of the fields /, I'm I suspect m

  I have Acrobat Pro 10, when I installed the CD player, it has affected the way I was able to move text boxes when I create a form of gall, he has also affected my ability to release and change the properties of the fields /, I'm I suspect my off lucky cat Adobe support will not help , nor a cure to.  Is there a place to find updates to Acrobat 10, if I uninstall my current program?  I still have my original CD and paperwork.  Adobe acknowledge that they have created this problem.   I worked very intensively with Acrobat Pro 10 on the form for a non-profit, I do part, and it happened immediately after that I was testing a form I created in Acrobat 10 to test with CD player. Windows 7 operating system

  This is usually due to the function 'Snap to Grid' is enabled. It can be accidentally activated via the keyboard, so this may have been what happened.