Create schemas for data warehouse for Reporting with Oracle XE

Similar Questions

• Integrate Oracle report with Oracle Application Express [secure]

  Hi Experts,

  I need to call the Oracle of Oracle Application Express report.

  Here is the version of the product

  Report & Oracle FMW 11g R2 (11.1.2) form

  Oracle Application Express 4.2.5.00.08

  Oracle Database 11 g Release 11.2.0.4.0 - 64 bit Production

  My question is, how I could integrate Oracle report with Oracle Application Express to secure the vocation of Oracle report.

  Please, help me.

  936969 wrote:

  Please give me a solution which can call Oracle report in secure mode, any user can not run the same copy of report the url. report by those who have access/role in the application to run.

  Take a look, the Operations of Service Web Oracle reports , it can help you.

  http://docs.Oracle.com/CD/E24269_01/doc.11120/e24479/pbr_webservice003.htm#CIABJEAB

  Especially see runJob

  http://docs.Oracle.com/CD/E24269_01/doc.11120/e24479/pbr_webservice003.htm#BABEJCFH

• Cannot create schema for the ATG publication

  I am so close to finishing my first install! Help, please.
  
  I'm stuck on creating the schema for the publication. All the rest when it is fine. But now:
  
  
  
  -----
  -SELECT A DATA SOURCE TO CONFIGURE-
  Enter [h] ELP, ain menu [m], [q] ITU to exit
  
  
  
  [R] reporting data warehouse - done
  [L] reports Loader - done
  * [P] Publishing
  [C] production Core - done
  [D]
  
  >
  
  -CONFIGURE DATASOURCE PUBLISHING-
  Enter [h] ELP, ain menu [m], [q] ITU to exit
  
  
  
  [C] the connection Details - facts
  [T] test connection - made
  * [S] create a schema
  Import initial data
  [D] drop Schema
  [O] set up another source of data
  
  >
  
  -------CREATE SCHEMA------------------------------------------------------------
  Enter [h] ELP, ain menu [m], [q] ITU to exit
  
  
  Editing
  
  
  * [C] create a schema
  [S] Skip
  
  >
  
  Beginning of creation of schema. View the log to /home/oracle/ATG/ATG10.0.3/home/ file
  .. /CIM/log/CIM.log
  |. . . . . . . . |
  |
  -CREATING SCHEMA FAILURE-
  Enter [h] ELP, ain menu [m], [q] ITU to exit
  
  
  ORA-00904: "CHECKIN_DATE": invalid identifier
  
  
  
  * [E] modify connection details
  [D] drop Schema
  [C] cancel
  
  >

  Can you check the ATG/home/./... /CIM/log/CIM.log and post the error here?

  Or maybe just drop the schema and try again to create.

  -Kiss

• Formatted VMFS3 ISCSI data warehouses are compatible with ESX5.5?

  Hi all

  I'm currently building an ESX 5.5 environment to run in parallel with my environment 4.1 existing and need the new 5.5 ESX servers to connect via iSCSI to a couple of VMFS3 formatted lun.

  I can't see them via the iSCSI storage adapter, but when I try to mount it asks me to format first. I wanted to confirm if anyone else had this problem or has confirmed that VMFS3 is fully compatible with ESX 5.5 connected via iSCSI.

  Thanks in advance.

  Looks like that the MTU on my NICs is set too high. Once I lowered around 1500, they began to present correct data warehouses.

  Thanks for the help, I think I have a handle on it.

  Thank you, MP.

• Planning for use with Oracle Incentive Compensation (OIC)

  I've read conflicting reports about agglomerates planning would be available for use to migrate compensation plans (and all other configurations of the OIC) multiple instances of Oracle e-Business applications.
  
  Does anyone know if R12 (12.04) is capable of managing the migration of the OIC? Is there a documentation as to how you should configure planning for use with the OIC?
  
  Thanks in advance.

  Hello

  It's Laurence of development planning. The OIC is not covered as part of sets of standard selection delivered by Oracle. You can consider you a SR (product code - 841) for coverage.

  If you already have java program/scripts which migrate from the OIC, then you can plugin with planning. You can also write your own API BC4J for the migration of the configurations of the OIC and register with planning.

  To learn more about writing BC4J planning Fwk APIs, please log an SR.

• Transparent data encryption are supported with Oracle Advanced Replication?

  Which version of DB, TDE supported with Oracle Advanced Replication?

  user939188 wrote:
  Which version of DB, TDE supported with Oracle Advanced Replication?

  "Materialized views do not support columns that have been encrypted by using transparent data encryption."

  Source - http://oracle.su/docs/11g/server.112/e10706/repmview.htm

• Create microsoft for iPad with wireless modem network

  I connect to the internet via a USB wireless modem. I am trying to create a network on my laptop I can connect my iPad so that I can access the internet with a modem viathis. I managed to create a network, but when I try to connect my iPad it ask the password, and then said: he can't connect after that I entered it. He does not say why it cannot connect. Any help much appreciated

  I connect to the internet via a USB wireless modem. I am trying to create a network on my laptop I can connect my iPad so that I can access the internet with a modem viathis. I managed to create a network, but when I try to connect my iPad it ask the password, and then said: he can't connect after that I entered it. He does not say why it cannot connect. Any help much appreciated

  Do you hear a modem high speed wireless 3G / 4G Verizon or AT & T or similar provider?

  If so, depending on your broadband wireless service provider, you may be able to buy a wireless router that supports your device to USB wireless broadband. The advantage of this is that you need not your laptop on just to be able to access the internet from your iPad. Your laptop and iPad could access the internet independently of each other.

  http://3gstore.com/index.php?Main_Page=page&ID=87

  If it is a modem type wide broadband dsl/cable USB, then you can contact your ISP and get them to exchange for a modem with an Ethernet port. If they are for you, I would recommend a router cable/dsl wireless broadband connected to the modem via ethernet and wireless in your laptop and iPad. For example, here's my network home.

  http://theillustratednetwork.MVPs.org/LAN/CurrentHomeLAN.PNG

  Otherwise you could build a network hosted with your Windows 7 laptop (connected to the internet via USB modem) and iPad. Here are a couple of free GUI frontends to the netsh commands that implement this. These turn a computer into a virtual router Windows 7 wireless. The downside is that the Windows 7 machine must be turned on all the time you want to access the internet from the iPad.

  http://virtualrouter.codeplex.com/

  http://www.Connectify.me/index.html

  help networking Apple iPad...

  http://www.Apple.com/support/iPad/WiFi/

  http://discussions.Apple.com/category.jspa?categoryID=267

  MS - MVP Windows Expert - consumer
  "When all else fails try what the captain suggested before you started...". »

• RCU throws an error when creating schema for IOM

  Hi Experts,

  I use DB 11.2.0.3.0 and operating system Red Hat Enterprise Linux Server release 5.4 (Tikanga) 64-bit. I installed the patches 12395110_111150_LINUX Group's regional coordination unit. When I installed it shows the error and I made a symbolic link like ln s /usr/java/jdk1.6.0_38 jdk, then the installation begins and I created OAM, UCM, SOA patterns and she completed successfully, but an error of IOM and the error is

  RCU - 6130:Action has failed-RCU - 6136:Error then that he was trying to run the SQLPlus action. Can someone suggest a solution.

  Maybe the next note can help:

  Note 1469169.1 - Oracle Fusion Middleware repository utility 11 g creation fails with UCR-6130 RCU-6136 on Oracle Enterprise Linux 6

  Thank you

  Eugen

• Link to database for MySQL with Oracle Express

  Hello Oracle Community,
  
  I made a post on this topic already in the section general, but here is the best place for my question. My goal is to access a mysql to oracle server. Some info about my system and what I've done so far:
  
  Windows Vista 64-bit
  Oracle Express 10.2
  
  -installed 32-bit DNS ODBC driver for the database mysql, tested and it succeeded, the name is CHANCE
  -created a new file in the folder admin/hs initLuck.ora, prameters are: HS_FDS_CONNECT_INFO = CHANCE HS_FDS_TRACE_LEVEL = OFF
  -new section in the listener.ora: (SID_DESC = (SID_NAME = CHANCE) (ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server) (PROGRAM = hsodbc))
  -new section in my tnsnames.ora: CHANCE = (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = GOGAPC01001)(PORT = 1521)) (CONNECT_DATA = (SID = CHANCE)) (HS = OK))
  -inexplicable the listener
  -Do a bit of luck, success of tnsping
  -created a link of database: CREATE DATABASE LINK LUCK24 CONNECT TO 'user' IDENTIFIED BY 'password' USING 'LUCK24 ';
  -tried to do a simple select statement: SELECT COUNT (*) FROM customers@LUCK;
  
  and there I get an error message:
  
  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:
  [Generic connectivity using ODBC] [Microsoft] [ODBC driver manager] Der Datenquellenname wurde nicht found, und're wurde kein Standardtreiber angegeben (SQL State: IM002;) SQL Code: 0)
  ORA-02063: preceding 2 lines of LUCK24
  
  can anyone help?
  
  Ikrischer

  Ikrischer,
  On which platform do you have installed the drivers 32 bit and HSODBC? He was on a Windows 32-bit platform? It is not supported to run the 32-bit software on a Windows 64-bit platform.
  There were some problems with versions 10.2.0.3 and earlier that are similar to those you typo - problems with bigint and select count. These are laid down in the 10.2.0.4 group of patches, so you should apply to your ORACLE_HOME 10.2 directories and see if the problem still occurs.
  However, as already said HSODBC 10.2 is now desupported you need to find to install 11.1.0.6 DG4ODBC and then apply the 11.1.0.7 patch group which also solves the problem.
  If you have access to My Oracle Support then see this note.

  Select columns MySQL Bigint use HSODBC returns an incorrect value when you use ODBC MySQL Connector (Doc ID 401086.1)

  Kind regards
  Mike

• search for substring with Oracle context index

  Hello
  
  I would like to know if it is possible to make a substring search with one of the obtion with context indexes offer.
  (ctxcat, ctxrule, context)
  
  
  example:
  
  I want to search for the word "berub" in a column in table_example.
  
  the value in the column are:
  
  The betther
  Bérubé
  A.Berube
  berub
  Berub
  BERUB
  Bell R
  S tartif
  Y Thibeault
  
  
  the return line must be:
  
  Bérubé
  A.Berube
  berub
  Berub
  BERUB
  Bell R
  
  Could be a simple sql
  
  Select * from table_example, where upper (a) as superior ('% berub %');)
  
  How can I do the same action with the index of context and select a statement (catsearch, contains, matches), if it is possible?
  
  An example would be welcome
  
  
  Thank you

  I would like to know if it is possible to make a substring search with one of the obtion with context indexes offer.

  Create your own list of words, and add an attribute substring_index to it. And then create the index with the preference just created.

• Operating systems certified for use with Oracle Designer repository

  Hi all
  
  We have Oracle Designer repository version 10g (9.0.4.3.14) installed on Microsoft Windows 2000. As our team OS and network will migrate the Windows 2000 operating system to Windows 2003, I want to know if Windows 2003 is certified for our designer version or not.
  
  Thanks in advance.
  
  Iman

  Hello

  I took a glance on Support Oracle certification the other day and I think it says your client, or close to, was certified on Windows 2003, but not supported. Best for you to double check

• Compression and query performance in data warehouses

  Hello
  
  Using Oracle 11.2.0.3 have a table made large index bitmap with dimensions would reveal.
  
  Understanding bitmap indexes are compressed by default, so assume it cannot compress more.
  
  Is this correct?
  
  You want to try to compress the large fact table to see if this will reduce the IO on the readings and so give performance benefits.
  
  Speed ETL fine want just to increase the performance of the report.
  
  Thoughts - someone has seen significant gains in data warehouse performance report with compression.
  
  In addition, current PCTFREE on table 10%.
  
  Insert as only tabel considering making this 1% to redesign performance report.
  
  Thoughts?
  
  Thank you

  Yes, you can't compress bitmap indexes, they are already compressed.

  Yes, Compression (obviously depends on the type of data) reduced definetely e physics / s so improves performance. We saw this in our environment.

  There ONLY inserts and updates, you can go with pctfree 0, you need to book ANYTHING for updates.

• PowerCLI script for DatastoreCluster, data warehouses and the size info, DataCenter, Clusters

  Hello - I am looking to remove the DatastoreClusters and then list data warehouses as well with their size (total size, used space, free space, put in service, uncommitted space) and the total number of virtual machines on this data store. I would also like to understand what data center and they are on clusters. Is this possible? I might want to limit what is displayed in data warehouses that are 13 percent of free space or less.

  Thank you

  LORRI

  Of course, try this way

  Get-Datastore.

  Select @{N = 'Center'; E={$_. Datacenter.Name}},

  @{N = "DSC"; E = {Get-DatastoreCluster - Datastore $_______ |} {{Select - ExpandProperty name}}.

  Name,CapacityGB,@{N='FreespaceGB'; E = {[math]: tour ($_.)} (FreespaceGB, 2)}},

  @{N = "ProvisionedSpaceGB"; E = {}

  [math]: Round (($_.)) ExtensionData.Summary.Capacity - $_. Extensiondata.Summary.FreeSpace + $_. ExtensionData.Summary.Uncommitted)/1GB,2)}}.

  @{N = "UnCommittedGB"; E = {[math]: tour ($_.)} ExtensionData.Summary.Uncommitted/1GB,2)}}.

  @{N = "VM"; E={$_. ExtensionData.VM.Count}} |

  Export Csv report.csv - NoTypeInformation - UseCulture

• effectiveness of the sql data warehouse and star/snowflake schema

  Hello

  We use 11.2.0.3 and need to improve the performance of queries for reports.  schema of data warehouse star/snowflake

  In addition to indexing, partitioning with star_transformation enabled etc I'm condisriing impact of the following on the performance of the queries.

  makes central (more than 1 billion lines) is associated with a client of dimesnion (a few hundred thousand lines) which in turn joined with the latest version of the dimesnion (includes approximately 30 000 lines).

  The table with a few hundred thousand lines (client dimesnion) alwsys must be questioned as stored data against the version of the customer at the time-, we wonder just latest_customer what users want to see

  the most recent version of the attributes of customer to stop data being fragemented through several lines in the report.

  If consideration would be more efficient to create a dimension that is equivalent to the customer but also stores the most recent version of the client attributes on the line-this means customer dimensuion many more columns but queries could would avoid additional research of this array of rank k 30.

  Thoughts are - it would be a material advantage?

  At the monent users request latest_customer to say would get all customers belonging to a certain multiple string.

  If change as above, then they would be interviewing the customer with a few hundred thousand lines dimension.

  Thoughts?

  Thank you

  Because a lot depends on the model of data access and data dissemination, we cannot really much more than only sb.  However, keep in mind Oracle accesses data by blocks (copies blocks and sometimes several blocks), in order to become more broad lines could have a paradoxical effect of not getting enough blocks in memory until you need it.

  It can help to visualize how data should be obtained (google something like visual sql and Karen Morton or Jonathan Lewis), as well as see the estimate and rowcounts actual imagined different plans.

• Performance of BI with warehouse data or data warehouse.

  Hi gurus,
  
  Anyone here have a document or presentation to compare a BI performance which is implemented with the warehouse database or data warehouse?
  
  Appreciate your help :)

  You need to come to a conclusion of performance tests.

  The query can also have different points of view;

  1 compare the performance on obtaining data directly from the source systems against obtaining data accumulated in a single database.
  2. by comparing the performance on obtaining data from a standard model against data from a dimensional model.

  In most cases; getting data from data warehouses should give better performance since then.
  Data warehouses allocate more resources toward BI systems.
  Source systems serve much purpose other than BI systems; If resources are shared.
  In a data warehouse for data sets are already in the same place, reducing the latency of the network.
  Data warehouse stores summary information.
  Data warehouses are implemented with three-dimensional models which serves best for the BI queries.