Create the disk as V1 group

Similar Questions

• Create the work around plan group, unless there is a clipping path, and then create the work around clipping path plan

  Hello again everyone.

  I was able to work on a lot of this code to other people's questions, but I hit a snag in my if/else clause structure... I need to make a plan to work around each groupItem of high-level layer [0]. This part is cake... unless there is a clipping mask. Visible limits do not work when there is a clipping mask. So, I built some of the loops that browse the pathItems search the clipping mask and return the visibleBounds said mask. However, I can't find how to structure the if clause in a way that will create the plan of work around the clipping mask when one exists.

  I am successful to find the visibleBounds of the mask and the creation of the appropriate graphic board, but it is ALSO to create a work plan around the visible boundaries of the entire group. How framing an if clause to determine if a work plan has been done around the clip path already and therefore not create a second work plan around the visible boundaries of the groupItem together? I guess I would need some sort of function to determine if createdArtboardAroundClip = true and if so, skip this group...

  Thank you all.

  Here is the code:

  var aB = docRef.artboards;
  var docLayers = docRef.layers;
  var layer1 = docLayers[0];
  var groupLevel1 = layer1.groupItems;
  
  for (a = 0; a < groupLevel1.length; a++){
      var groupLevel2 = groupLevel1[a].groupItems;
      var vB = groupLevel1[a].visibleBounds
      
      for (b = 0; b < groupLevel2.length; b++){
          var paths = groupLevel2[b].pathItems;
          
          for (c = 0; c < paths.length; c++){
              if (paths[c].clipping == true){
                  var clipBounds = paths[c].visibleBounds;
                  aB.add(clipBounds);
                  break;
                  }
              }
          }
      aB.add(vB);
      }
  

  Oh sorry, I forgot that one.  I was able to view the image basically to see what is happening.  Okay, so I saw a problem, you have one of your straps closure irrelevant.   Your first nested for loop does not close where you want.

• Create the form with named group presentations

  JDev ADF BC 11.1.2.1.0
  
  Need to create a form that contains named layouts group, also the group layout content should be presented in two columns.
  Suppose for example that three provisions of different group named with some components, next to hand left and right of the browser window.
  Group layouts will be aligned under another provision of the group.
  Hope that the requirement is clear.

  Put a component in the layout panelGroup panelBox. You can provide a title for the group box.

• Problem creating the disk hard recovery Satellite A200 + touch pad

  So I lent my laptop to my daughter until she could get enough to buy a PC.
  Well, I got it back that only she has installed a bunch of stuff to the point where it is blowing on vista even after than my attempts to clean I decided to start the laptop using the creation of recovery disk came with the laptop.

  But now, I used about 8 dvd discs, trying to create a good drive but I restart fr. with the disc in... nothing happens. I'm trying to spend directly in vista... and he says can not read the disc. I've recreated the disc several times and the same result and well, it was the only type of restore disc that came with the laptop]

  Also as I've gotten at the time when I use the touchpad my cursor is jumping around, is that fixable?

  Thanks in advance.

  Hello

  Sorry, but something must be wrong in your post. As far as I know Satellite A200 comes with original Toshiba Recovery DVD. You should not create anything. New laptops like A300 do NOT come with DVD recovery and each laptop user, it should only create, but not with Toshiba Disc Creator. For this Toshiba application offers another tool. The name is Toshiba Recovery Disc Creator. It is not the same tool. So you have probably original Toshiba drive.

  So if you have it please use this recovery DVD as described in this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=37706

• How to create the disk partition in vista

  I had a preloaded Vista laptop with a backup/restore partition.

  I would like to create another partition to install Windows7, can someone help me.

  the type held

  collyns abdulmujeer

  Hello

  read this information

  How to cut and create a Partition with Vista disk management

  http://www.Vistax64.com/tutorials/95398-disk-management-shrink-partition.html

  and read the related links, too

• create the disk to reset password for windows 7

  I want to create a Windows 7 password reset disk. Instructions say to use a Flash DRIVE or a floppy disk, but I don't have a white flash drive, and of course my computer is not a floppy drive. I have blank CDs. Can I use this media for the reset disk? And if not, why not?
  CarlS

  It is not possible to use a CD or DVD to create a password reset disk. This is normal.

  Why Microsoft chose not to allow it, I don't know.

• Create the outline of a group of objects not closed in illustrator

  Is it possible to create a thicker line line to the border of the object without tracing the object manually. The object placed in a group and it closed cavities not bites of paths.

  I would not use copies.

  I would take this drawing in the live paint and fill it with white.

  Then, add a line through the control panel appearance, thickness twice as you wish and go under 'content '.

  Edit: Sorry for the drawing - I useed my mouse. It's paths just open.

  

• Svchost.exe creates the disk activity that freezes my computer for several minutes

  After installing Windows 7 with everything working well, I started now get frequent (every few minutes) drive activity periods that are so intense that I can't do anything until they stop.  I tried to disable services (indexing, superfetch), my pagefile is set to automatic and the memory usage is only 50%.  I even uninstalled Norton Internet Security 2010 to see if it would eliminate the beating.  Even with only a single program running (I tried IE, Opera and Firefox as the browser), I still have this problem.  Nothing seems to stop it.  I'm going to uninstall W7 and go back to XP.  Any suggestions?

  Hello

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files. Once removed all malware these should help restore the WMP.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Remove the material creates the disk activity

  I have an external hard drive, it is encrypted for Bitlocker. I have only checked in the performance monitor, there is absolutely no activity on this drive. Then I try safely remove the player and boom, Security Essentials comes in some internal (system volume or almost) directories. Then there is the system that accesses $Mft and other things and then comes an error that the drive is in use and cannot be deleted. No idea what is wrong and what can I do to solve this problem (unless you finish the session or restart the system). Y at - it no harm in simply pulling the plug when there is no activity?

  Hi kadajawi,.

  Check if the drive is configured forfast moving:

  1. click onstart.

  2 right-clickcomputer law

  3. SelectManage

  4. click onDevice Manager

  5 expanddisk drives

  6. Select the appropriate drive

  7. right click on the drive and selectProperties

  8. go in thepolicies tab

  9. Select quick deletion

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite P300-1CN - failed to create the recovery disk

  Hi, I tried to create the disks of backup for my new P300-1CN recovery, but I get a power calibration error (error code: 0E01B5-26-00037304) when the progress gets 50% on the first disc of "current" bar and 25% along the bar of"progress".

  I have now tried 3 times and exactly the same thing happens every time.

  I have the cable power in and power on a full battery.

  Any ideas?

  G.

  Hello!

  Have you tried the disks from different manufacturers? I prefer to use DVD - R Verbatim and TDK discs.
  Check it!

  Also on the site of Toshiba, I can find a few updates firmware for the CD/DVD drive. Check if you have such a unit and update the firmware.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Cannot create the emanagement recovery disks

  Hello, I have an acer aspire one d255 I want to reset to factory default. I never did an installation of a recovery particion before this thought I'd better create discs of backup just in case.

  I have found the directions to create the disks, but whenever I select 'create disc factory default "I get the following message.

  "

  Configuration of the hard drive is not set by default. Abandoned backup.

  The only hardware change I did via the MMC disk management, I declined the c drive and made a particion of data storage.

  What is causing me to not be able to make the discs?

  more importantly, I'm likely to encounter a problem to make the recovery disk reset, if she can't create discs?

  If you don't have all the data your new partition created yet, simply expand the disk partition hard back to the State of origin and create more complex recovery disks.

  Hope that helps, good luck

• Only 24 of 48 drives available for the disk pool

  I have a MD3220 with a shelf of 1220 and I try to re - configure and create a pool of large disks with all 48 records.  When I go to create the disk pool, it only takes 24 14 to but shows 32 TB available disks.  I amazed the previous installation configuration because we had to take a tablet of 1220 from this table not used for another project, so now I'm back to reconfigure.  I wonder if the high-end features must be re-activated because I deleted the config.  Maybe, that's all.  When I go to md - storage.com to regenerate a key of course it doesn't have no idea what my system.  Is there something that I am missing.   Should be a two-minute task that will now take hours apparently.

  Hello Tradsd,

  Ah, that's your problem. Yes two disks must be of the same size & speed, otherwise the pool will use the specifications of the smaller disks to build the pool. Yes, you can develop the direct pool you just need to get seen by MDSM readers and as long as they are showing that no, so you can assign them to a disk pool or group of disks that you want to. Here is a link to the Administrator's guide, and if you look at page 97 he explains about the readers with the same physical size. FTP://FTP.Dell.com/manuals/common/PowerVault-md3200_Administrator%20Guide_en-us.PDF

  Please let us know if you have any other questions.

• Satellite Pro M30: Is it possible to restore the disk Win XP at least

  I recorded the M30 Pro of the Satellite with Win XP Professional 5 years on the Toshiba-Europe website.
  Is it possible to restore the disk Win XP at least?

  I'll ask Toshiba for assistance (already done) or there is a way to create the disks on mine?

  I'm sure someone went down this way (ar tried at least).

  PS: it is a time for the upgrade of the HARD drive.

  Thank you all.
  Wall

  Sorry, but I don't really know what you are meaning by the Win XP disk restore.

  The Toshiba laptop was delivered with the Toshiba Recovery CD.
  If you want to restore the OS from Windows XP that is installed on the HARD drive, then use this disk and reinstall the WinXP.
  To start the installation, you must boot from the recovery CD.

  If you want to create a clean image and then install Win XP with a CD of MS Windows, download the Toshiba driver and create the image using the tool like Norton Ghost third 3rd for example.

  Welcome them

• Cannot resize the disk of the asm

  Hi, greetings of the day...
  
  I have created a disk of asm using asmtool as:
  asmtool - create 500 D:\Asm_disks\disk3;
  asmtool - create 500 D:\Asm_disks\disk4;
  Now when I try to resize the disk,
  
  
  
  SQL > select name, total_mb v$ asm_disk;
  
  NAME TOTAL_MB
  ------------------------------ ----------
  DATA_0000 2000
  DATA_0001 2000
  FRA_0002 3000
  FRA_0003 3000
  DATA_0002 500
  DATA_0003 500
  
  6 selected lines.
  
  SQL > alter diskgroup DATA resize disk size 'DATA_0002' 1000M;
  change DATA diskgroup resize disk size 'DATA_0002' 1000M
  *
  ERROR on line 1:
  ORA-15032: not all changes made
  ORA-15289: ASM DATA_0002 disk cannot be resized beyond 500 M
  
  
  
  Please help me in this regard
  
  Thank you
  Uday

  udayjampani wrote:
  Thank you

  I understand what you say, I have created a disk of asm with 500 MB of size using asmtool, so I can't resize using asm instance.

  1. What is the use of asmtool-added option, we can add an existing using this command drive space?

  This isn't for adding space, but it adds the label to the disk partition...
  asmtool - add \Device\Harddisk1\Partition1 ORCLDISKASM0
  >

  2 can you please explain this more, * it could be increased if you already held 300 total asm 500 disk space *?

  Think like OS, you have created a 10 GB partition for disk D:\ example. And now, you create files/folders with size of hugh (as some movies ;)) to drive D:\, so eventually your drive D:\ will fill. This is the case even with your asm disk, once you have used all your available space of the asm disk (that you created through asmtoll), you can not increase.
  By asmtool - create D:\Asm_disks\disk3 500, you assign the total size to 300 from the asm disk. Just as you add 10 GB partition for OS...

  You come to the backup from my point of view: it could be increased if you already worked 300 asm disk space total 500

  I have created the disk with the following text:
  asmtool - create 500 D:\Asm_disks\disk3 > size is 500

  I create diskgroup with
  SQL > create diskgroup DB 'D:\Asm_disks\disk3' size disc 300; > Here I wll use only max 300 size of 500 total. So once I get to the threshold of 300, I can increase the asm disk up to 500.
  As
  SQL > alter diskgroup DB resizing disk "D:\Asm_disks\disk3' size 500; > Increasing up to 500

  Default if the clause you SIZE omit while creating a diskgroup, asm then disc occupies all the available space of the device that you have created by asmtool

  >

  3. What is meant occupation here, not here where we can control the right of occupancy?

  We can control as I explained.

  See also article that explains: http://www.oracle-base.com/articles/10g/AutomaticStorageManagement10g.php
  Hope that explains

• VIPerlToolkit: How to create a disk image

  Hello

  I was wondering how to create a new floppyimage in a data store using the viperltoolkit as if it was possible in the dialog box editing a virtual machine (see the screenshot).

  I think there must be two steps (hidden):

  1. create the *.flp file in the specified storage (but how?)

  2 use this file as a support for the floppy device (I'm able to do this )

  Can someone help me with the first? I couldn't find any method that could be the one.

  Thanks, Chris

  When you create the disk, make sure you that choose 'create' in the VirtualDeviceSpec.FileOperation

  http://pubs.VMware.com/VI-SDK/visdk250/ReferenceGuide/Vim.VM.device.VirtualDeviceSpec.FileOperation.html

  http://pubs.VMware.com/VI-SDK/visdk250/ReferenceGuide/Vim.VM.device.VirtualDeviceSpec.html

  Steve JIN, VMware engineering

  Creator of VI Java API: http://vijava.sf.net/