create the missing icon against the section of the form of the application instance

Hi all

I use OIM 11 g R2 PS2, and I see that create icon missing against the section of the form of the application instance. I am trying to create an instance of the application, and when I try to load the form, I don't see the icon 'create' at all.

Is this a known problem. ?

Thanks in advance.

This changed in OIM 11 g R2 PS2 version. To create resources for the instance of the application, you must follow the steps below:

1. connect the console to sysadmin

2. create a sandbox

3. go in Configuration--> Form Designer--> select the resource type--> click on the button create

From there, you can create the form. Once the form is created, it will be visible in the Instance, application from which you can modify the same.

HTH

Tags: Fusion Middleware

Similar Questions

  • Error: Failed to create the application process: operation not permitted - deployment of ripple to Dev Alpha

    Hey people,

    I was puzzled on this the last bit of time and can't seem to find a solution. (The closest thing I could find is here: http://supportforums.blackberry.com/t5/Web-and-WebWorks-Development/Webapp-not-starting-on-device-VM... but there does appear to be a response [UPDATE: Adam Stanley mentioned that it was due to a missing Debug token, and this isn't the case for me.])

    When I try to "Package & launch" of the ripple, the project is created correctly and even installs the application on the device (is the application icon on the home screen). However, when he tries to run the application, the console of the ripple spit:

    "Error: cannot create the application process: operation not permitted".

    Any later attempt to open the application from the icon on the screen will result in an immediate fall.

    As an attempt to circumvent, I use "Package & sign" and then run the blackberry-deploy with installApp - launchApp - tool options and... it generates the same error as described above.

    I'm working on OS X, and I successfully installed the Webworks SDK as well as the undulation on Chrome Plugin. I have a project together upward with a running python web server and can view the content properly on the ripple. I have my signature correctly registered keys and I generated the file debugtoken.bar. I downloaded the debugtoken on the alpha dev successfully device and placed a copy of the debugtoken.bar file in the root folder of the SDK Webworks. The unit is in developer mode.

    Someone at-troubleshooting suggestions?

    [Edited for format (original post deleted line breaks) and also to highlight a number of things]

    So after getting back to the question, I loaded build with the SDK 1675 Webworks (1.0.4.5) published today, and I was able to go beyond the permission error that plagued me previously.

    Thanks again for the help Adam.

  • How to create the application menu?

    Hello

    I want to add to the settings page for my application.

    I created the application menu in the Navigation pane.

    See my coding:

    NavigationPane {
    id: navigationPane
      Page {
            id: mainpage
                           Menu.definition: MenuDefinition {
                        actions: [
                    ActionItem {
                         title: "Action"
                              imageSource: "asset:///images/setting.png"

                        onTriggered: {

               navigationPane.push(settings.createObject())
                                                       }
                               attachedObjects: [
                              ComponentDefinition {
                                    id: settings
                                       source: "setting.qml"
                             }
                         ]
                     }
                  ActionItem {
                               title: "help"
                                    imageSource: "asset:///images/help.png"
                                }
                       ]
                     }
                     titleBar: TitleBar {
                               title: "Main Bar"
                                                    }
                                              }
                                          }

    and on settings.qml

    Page {
              id: settings
               titleBar: TitleBar {
                      title: "Settings"
            }
            Container {
                background: Color.Yellow
                Label {
                 text: "Want [Dark or White] theme selet below"
            }
              DropDown {
                title: "Select Theme"

                Option {
                     text: "Dark"
                             onSelectedChanged: {

                          if (Application.themeSupport.theme.colorTheme.style == VisualStyle.Bright) {
                                      Application.themeSupport.setVisualStyle(VisualStyle.Dark);
                                  }
                            else {
                                 Application.themeSupport.setVisualStyle(VisualStyle.Bright);
                                      }

                             }
                       }

                Option {
                        text: "white"
                         selected: true

                                onSelectedChanged: {

                                 if (Application.themeSupport.theme.colorTheme.style == VisualStyle.Bright) {
                                  Application.themeSupport.setVisualStyle(VisualStyle.Dark);
                                           } 

                                       }

                                    }
                               }
                            }
                       }

    and I see not the menu look at this picture

    now, I want the solution please can someone help.

    -shaishad

    the definition of menu on the navigationpane

  • Failed to create the application of FDM

    Hi all

    I am a newbie in FDM Hyperion, I installed and configured HFM and FDM 11.1.2.3 2008R2 in VM window.

    Installation went well and the configuration went all very well for the Application Server, Load Balancing Manager, the Task Manager and web config Manager

    I am able to create a HFM application, but I am not able to create an Application <>FDM.

    I am creating the application using the Workbench. So I give all the details like name of the application, description, App Path & App group under general tab Oledb Provider, the service name, user and password in the database of the tab and click on 'OK '. After a while, I get a pop up message "unable to connect to the database. Please check the information of database and verify that the database is accessible."

    I did a search and found the following two links, but still no luck.

    http://Hyperion-Mady.blogspot.in/2013/11/unable-to-connect-to-database-please.html

    https://community.Oracle.com/thread/3538368

    Please help me!

    Hello

    have you given a static IP to your VM.

    If so, then open the hosts file and put an entry for that IP with FQDN.

    It seems also that you have installed new oracle client according to the PATH variable, you don't have it?

    Kind regards

    -DM

  • How to create the Application on HFM 11.1.2.2 profile

    Hello

    I just installed Hyperion Financial Management 11.1.2.2. Everything was going well until I tried to use HFM. I saw no classic directors like the previous version, and when I tried to create workspace request, it forced me to fill in the value of the application profile (based on what I know about the previous version, the application profile is created from the classic administration).

    However I tried to explore the Oracle Documentation (Hfm_admin.pdf), and I find that it does not help because it says that I can create the application profile of the Office of management financial (I recognize nothing but the trash is located on my desktop).

    Since this is a new version of Hyperion, according to me, there is not a lot of guide that can help, and so I ask the suggestion of experts here. I hope someone can help me solve this problem, since I need to use the application to learn how to use.

    Thank you.

    Hello

    11.1.2.2 has new features and changed much about the interface.

    Like the previous versions, application profile is always created in the client HFM.
    But on this client version do not settle while you install the suite EPM.
    The installation of the client programs must be downloaded separately which is available on the edelivery.oracle.com (EPM System Release 11.1.2.2.0 Client installers for Microsoft Windows V31866 - 01.zip)

    For once you download and install HFM customer would be installed for you to create the application profile, and in this client version could be used only to define the profile and the management of metadata.
    And once the customer installed the starter kits would be also be installed where we could see examples of applications.

    11.1.2.2 menu is administration of Consolidation where you have an option to create, save, open applications...

    Hope this helps,

    Thank you
    Charles Babu J

  • Cannot create the application under "C:\programData\Application Data" directories.

    I am trying to install a program, but it fails to install with error "Unable to create directories of the application under"C:\programData\Application"features.". It sounds like a permissions issue, so I compared the permissions on another installation of Windows 8 who did install correctly and it appears to be identical.
    Only the "ProgramData" folder is visible. The ApplicationData folder is hidden and I can't display to check the contents of the folder or permissions.

    Any ideas?

    Hi Ken,

    Please answer the following questions so that we can get a better idea about the issue.

    1. what application are you trying to install?

    2. What is the exact error message you get?

    AppData is a hidden folder. The Appdata folder in the program data is a super hidden folder. We should not make any changes in this folder as it effects the behavior of other applications as well. You can view the file by following these steps.

    Here are the steps to display the folder.

    a. press Windows key + W , type: Hidden

    b. click on settings under the search box.

    c. click Show hidden files and folders and drives on the left side of your screen s.

    d. then click on Show hidden files, folders and trainings and uncheck Hide protected system files.

    e. click OK

    In Windows 8, the default location of user data has changed. To enable interoperability with existing applications, junction points are used in the deprecated locations and point to the new locations in Windows 8. A junction Point is a physical location on the local hard disk that points to another location on the drive or another storage device. So, here the application is not able to find the point of junction. There could be two reasons for the question. One is the application is unable to find the path and other permissions.

    I suggest you run the installer fix and

    Solve problems with programs that cannot be installed or uninstalled

    http://support.Microsoft.com/mats/program_install_and_uninstall/?WA=wsignin1.0

    Note: when it gives you the possibility to solve the problem by itself, or manually, manually select and then continue. This will help you in the installation of the application.

    Given permission, we know which you try to install the application. It would be better if you contact the manufacturer of the product for this particular application permission issues.

    Let us know the status of the issue. We would be happy to help you.

  • JumpStartKit installation hangs at 87% complete when creating the database / instance configuration

    Hello people, I am wanting to evaluate Oracle WebCenter Portal 11.1.1.8 (huge improvement over 11.1.1.7, which I have already given a quick test in the VDI provided by Oracle).

    So, I've discovered this Jump Start Kit that installs every needed part once you have a properly configured Linux environment. I had fun with the prereqs but now that everything is finished and I am so EXCITED to make it past 'STAGE 4 '.

    So now, I encounter the same problem during installation - STEP 6 of 22 Configuration of the database Instance (creating database filling) it gets 87% complete and then nothing seems to happen, it never beyond this point, even if I wait 10 hours more:

    ***

    NOTE: I think that my problem is not specific to the "Jump Start Kit", but is rather something others have met during the stage of creation/configuration of the Oracle Universal Installer in general database. And I hope that others have solved.

    ***

    "/ opt/oracle/portal" is my INSTALL_DIR; I had started the installer of JSK with this command:

    . / runme INSTANCE_PASSWORD textile ROOT_PASSWORD = rpwd DOWNLOAD_DIR = = / media/sf_Downloads/JSKfiles INSTALL_DIR = / opt/oracle/portal

    -L' installer makes this well before it seems to get "stuck" - even after many hours there is no change, HD does nothing, CPU stays at < 5% use:

    rtkit.main.JSKStarter - launchScript:172 - kills Jun 10 15:41:38 MDT 2014: BEGIN STEP 6 of 22: Configuration of the database Instance. Estimated time is about 5 minutes. Please wait..

    15:41:38.545 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 -.

    15:41:48.222 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - copy of database files

    15:41:48.413 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 1% complete

    All the 15:41:52.894 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 3%

    All the 15:41:52.915 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 11%

    All the 15:42:02.917 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 18%

    All the 15:42:32.920 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 26%

    15:42:42.638 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 37% complete

    15:42:42.640 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - creation and start-up of Oracle instance

    All the 15:42:48.568 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 40%

    All the 15:42:56.827 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 45%

    15:42:57.357 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 46% complete

    All the 15:42:57.526 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 47 percent

    15:42:57.627 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 48% full

    All the 15:42:57.834 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 49%

    15:44:42.915 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 54% complete

    All the 15:44:42.963 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 59%

    All the 15:44:43.036 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 60%

    All the 15:44:43.452 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 61%

    15:44:43.452 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 64% full

    06/10/2014 15:44:43.453-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - creation of database of fill

    15:44:43.493 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 68% complete

    15:44:43.510 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 72% complete

    15:44:43.571 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 76% complete

    15:45:01.516 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 87% complete

    I use VirtualBox on Windows 7, I tried several times, first with the OS as Oracle Linux 6, then Oracle Linux 5 (learning to update the version of Java of fun!).

    It always happens at the same point, and then it just seems do nothing - no progress, but no error no message on the screen (see below the log files). But it seems to use less than 5%... the use of the processor and 10 hours of waiting makes no difference.

    After that I got tons of Google to search, I tried increasing my paging file, adding more memory and disk space (12 GB of RAM and 10 GB sap) and 20 GB of free space on the hard disk, but still nothing has changed.

    In post #2 of this thread, I'll give you separately the registration details that I hope will be useful.

    Thanks in advance!

    Darren.

    PS: Moderator, I tried to create this thread in other spaces, because I did not know this 'Portal JSK' specific one, which is why my son was rejected? NO REASON WAS GIVEN. If that IS the reason why, I must say that it will be almost impossible for anyone who is able to help me actually FIND this thread here because as I said I don't think specific for ONLY JSK portal. (But I'll post it here just in case this is the reason for previous releases)

    Hey Darren -.

    Installation with installation "office" is not the problem - no conflicting package it.

    I did add a short and FULL in/etc/hosts domain name and use the HTTP_SERVER_NAME option.  (But again, that shouldn't cause any problems during dbca.)

    I didn't install VBox extensions, since I'm just using a text installation (and created a corresponding configuration for VBox and vSphere), but I don't know that this is unrelated to all the.

    Regarding packages, if the database installs fine (which did you), your packages may very well.

    Here is my kickstart file - maybe you can try to use it, and then we can rule out configuration problems.  After the kickstart, everything I do is copy the installation files (in fact, I have them on a separate vmdk I just ride), and:

    (in oracle)

    CD/mnt/orainst/install & mkdir WCPortal_JSK_Linux.x 86-64 & WCPortal_JSK_Linux.x 86-64 cd & unzip /WCPortal_JSK_Linux.x86-64.zip...

    CD /mnt/orainst/install/WCPortal_JSK_Linux.x86-64 &. / runme DOWNLOAD_DIR = / mnt/orainst/installation INSTALL_DIR = / u01/app/oracle/product/webcenter HTTP_SERVER_NAME = wcportal.localdomain INSTANCE_PASSWORD = weblogic1 BIENVENUE1 = ROOT_PASSWORD

    If you want to make a desktop installation, delete the text, skipx and office packages (I added a few comments around that part), and it should work fine.  Don't worry about VBox extensions until you have a JSK running successfully.

    Fingers crossed it gets you more... Let me know.

    -Ed

    #platform = x 86, AMD64 or Intel EM64T

    #version = DEVEL

    # The firewall configuration

    Firewall - disabled

    # Install OS instead of upgrading

    install

    # Use installation CDROM support

    CDROM

    # Password Root

    rootpw - plaintext BIENVENUE1

    # Authorization system information

    AUTH - useshadow - passalgo = sha512

    # Use installation in text mode

    text

    # Keyboard system

    keyboard us

    # System language

    lang en

    # SELinux configuration

    SELinux - disabled

    # Do not configure the X Window System

    skipx

    # Disable firstboot

    Firstboot - disable

    # Level installation registration

    logging - level = info

    # System timezone

    time zone - isUtc America/New_York

    # Network information

    network - bootproto = dhcp - device = eth0 - onboot = on--hostname = wcportal

    # Boot loader configuration

    bootloader - location = mbr - driveorder = sda

    # Clear the Master Boot Record

    zerombr

    # Information partition offset

    clearpart - all - initlabel - discs = sda

    # Partition of a disk information

    part/boot - fstype = ext4 - size = 500

    part pv.01 - growth size = 1

    volgroup vg_wcportal - pesize = 4096 pv.01

    logvol / - fstype = ext4 - name = lv_root - vgname = vg_wcportal - size growth = 1

    # choose only one of the three following instructions

    # / tmp/swappart only works if uncomment lines in pre calc memory size

    #% include/tmp/swappart

    #logvol swap - name = lv_swap-= vg_wcportal - size = 12288 vgname

    swap logvol - name = lv_swap-= vg_wcportal - size = 9216 vgname

    % before

    #MEMT =' cat/proc/meminfo | grep ^ MemTotal | AWK ' {print $2 '}'

    #let SMEM = $MEMT/1024

    #echo 'swap logvol - name = lv_swap - vgname = vg_wcportal - size = $SMEM' >/tmp/swappart

    end %

    % post

    #rm f/tmp/swappart

    # Fix for nproc problem on OL6 (MOS score [1487773.1 ID])

    -i EI sed / ^ \ * \s * soft\s * nproc\s * $ 1024 / * \t-\tnproc\t16384 /' /etc/security/limits.d/90-nproc.conf

    # It's ugly, but seems to be necessary for ks on vsphere (not on vbox), so adding the controls

    Oracle ID > / dev/null 2 > & 1

    If [$?-eq 0]; then

    userdel oracle

    RM-f/var/spool/mail/oracle

    rm - rf/home/oracle

    FI

    groupmod oinstall > / dev/null 2 > & 1

    If [$?-eq 0]; then

    groupdel oinstall

    FI

    groupmod s/n > / dev/null 2 > & 1

    If [$?-eq 0]; then

    groupdel dba

    FI

    Groupadd-g 501 oinstall

    Groupadd-g 502 s/n

    g 503 groupadd Oper

    Groupadd g 504 asmadmin

    Groupadd g 506 asmdba

    Groupadd g 505 asmoper

    adduser, 502 - g oinstall s u g/n, asmdba, oper, oracle of wheel

    passwd oracle<>

    EU1

    EU1

    EXPRESSIONS OF FOLKLORE

    # kdump(1) not enabled when you install text without firstboot

    / sbin/chkconfig off kdump(1)

    Hostname = wcportal

    echo DHCP_HOSTNAME =------"$HOSTNAME\" > / etc/sysconfig/network-scripts/ifcfg-eth0

    IPADDR = "/ sbin/ifconfig eth0 |" grep inet\ addr. AWK '{print $2} ' | cut d: f 2'

    echo $HOSTNAME.localdomain $IPADDR $HOSTNAME > / etc/hosts

    # Disable graphical boot

    # but doesn't for some reason any!

    sed-i of / rhgb quiet / / g' /etc/grub.conf

    mkdir Pei/u01/app/oracle/product/webcenter

    chown-r oracle: oinstall/U01

    end %

    % packets

    @additional-devel

    @base

    @compat-libraries

    @console-internet

    @debugging

    @directory-customer

    @mail-server

    @fonts

    @graphical-admin-tools

    @hardware-monitoring

    @java-platform

    @large-systems

    @legacy-unix

    @legacy-x

    @nfs-file-server

    @network-file-system-client

    @network-tools

    @performance

    @perl-runtime

    @scientific

    @server-platform

    @system-admin-tools

    # - UNCOMMENT TO DESKTOP - START

    #@basic-desktop

    #@desktop-platform

    #@x11

    # - UNCOMMENT TO DESKTOP - END

    compat - libcap1.x86_64

    compat-libstdc ++-33.i686

    compat-libstdc ++-33.x86_64

    elfutils-libelf - devel.x86_64

    expect.x86_64

    GCC - c++ .x86_64

    glibc.i686

    glibc - devel.i686

    ksh.x86_64

    libaio.i686

    libaio - devel.i686

    libaio - devel.x86_64

    libgcc.i686

    libstdc ++ .i686

    libstdc ++-devel.x86_64

    NSS-softokn - freebl.i686

    numactl - devel.x86_64

    unixODBC.i686

    unixODBC.x86_64

    unixODBC - devel.i686

    unixODBC - devel.x86_64

    glibc.x86_64

    glibc - common.x86_64

    glibc - devel.x86_64

    glibc - headers.x86_64

    NSS-softokn - freebl.x86_64

    Oracle-RDBMS-server-11 GR 2-preinstall

    end %

  • Create the new instance to a diferent project

    Im trying to create a new instance in a project, I use an interactive global activity to do this, when trying to create the reception that this message in the BPM 'JavaLangNullPointerException', the global comprehensive interactive activity log is in a different project that I want to create the instance.

    This is the code I used in BPM

    args ['argPrueba'] = 1234

    Result2 = ProcessInstance.create (processId: "/ Test", arguments: args, argumentsSetName: "BeginIn")

    in the other project, I configure the beginIn of this way activity:

    idPrueba = argPrueba

    I used BPM 10g

    If you cannot create instances of processes in the same project, you need to double check your logic.

    1. check that 'args' is an array of associative strings (Any [String]).  Believe that the default value to a variable called "argsIn" (you have "args" in your logic).

    This means that Begin activity has two variables of the arguments
    named 'nameArg' and 'amountArg' and you're implementation in
    for variables 'name' and 'amount' respectively
    argsIn ['someArgVarName'] = 'Hello '.
    argsIn ['someBpmObject'] = myBpmObject

    2. check your other settings in logic.

    Instance.Create (processId: "/" + idOfProcess, arguments: argsIn, argumentsSetName: "BeginIn")

    The processId parameter is the thing I most often used to screw up with that. This is the text that you see when you process in the project right-click browser tab-> "Properties". Look at the value in the field 'Id' and not the field 'Name' (the name without a space). Prefix with "/" as presented here and if you have deployed this using a unit of Organization (UO) then prefix this chain also.

    The third parameter is almost always "BeginIn". Start of activities in a process can have several incoming argument mappings, the default value is "BeginIn". See your, double-click the process Begin activity and seek on behalf of mapping in the upper left corner of the dialog box.

    "argsIn" is the set of variables of incoming arguments you want to spent in the process. A common error is to type the names of the variables argument entering without the double quotes, as follows:

    . . .
    This will * NOT * work
    argsIn [someArgVarName] = 'Hello '.
    argsIn [someBpmObject] = myBpmObject
    . . .

    Here is the correct syntax:

    . . .
    This * WILL * work
    argsIn ['someArgVarName'] = 'Hello '.
    argsIn ['someBpmObject'] = myBpmObject
    . . .

    In this example, the process has two argument variables. It doesn't matter if the incoming arguments are arguments of primitive type (e.g. String, Integer, Decimal...) or objects of BPM, it is always in the same way.  In this example, there is an incoming string argument, called "someArgVarName" and an argument entering BPM object called "someBpmObject".

    Dan

  • create the new instance of the database

    Hi all

    Today, I have to create three instances on my (RedHat, Oracle 10 g) oracle server. It comes to sql that I found to create the database:

    CREATE DATABASE mynewdb
    The USER SYS IDENTIFIED BY pz6r58
    The USER IDENTIFIED BY y1tz5p SYSTEM
    LOGFILE GROUP 1 ('/ u01/oracle/oradata/mynewdb/redo01.log') SIZE in the 100M.
    GROUP 2 ('/ u01/oracle/oradata/mynewdb/redo02.log') SIZE in the 100M.
    GROUP 3 ('/ u01/oracle/oradata/mynewdb/redo03.log') SIZE 100 M
    MAXLOGFILES 5
    MAXLOGMEMBERS 5
    MAXLOGHISTORY 1
    MAXDATAFILES 100
    MAXINSTANCES 1
    CHARACTER SET US7ASCII
    NATIONAL CHARACTER SET AL16UTF16
    DATAFILE ' / u01/oracle/oradata/mynewdb/system01.dbf' SIZE 325 M REUSE
    LOCAL MANAGEMENT MEASURE
    SYSAUX DATAFILE ' / u01/oracle/oradata/mynewdb/sysaux01.dbf' SIZE 325 M REUSE
    TABLESPACE tbs_1 default
    TEMPORARY TABLESPACE tempts1 default
    TEMPFILE ' / u01/oracle/oradata/mynewdb/temp01.dbf'
    RE-USE OF SIZE 20 M
    UNDO TABLESPACE undotbs
    DATAFILE ' / u01/oracle/oradata/mynewdb/undotbs01.dbf'
    SIZE 200M REUSE AUTOEXTEND ON MAXSIZE UNLIMITED;


    Each size of the user will be larger than 3 GB. I don't know what exacly means in this word of the line 'REUSE '.

    DATAFILE ' / u01/oracle/oradata/mynewdb/system01.dbf' SIZE 325 M REUSE

    Maybe someone can give me a short advaice how to install size of data, temp files to get the best performance.

    You can read this link before you proceed with the creation of the database,

    http://download.Oracle.com/docs/CD/B19306_01/server.102/b14231/create.htm#sthref260

    HTH
    Aman...

  • Failed to create the application (first) Workbench ("failed to create the application, check if the application name contains an invalid string).

    Connection to the local server to Livecycle (ss4 trial) works, set up normally - 1.0 repository service provider service provider is "RepositoryProviderService".

    Error message is ambiguous and the issue is certainly not with the name of the application. This is a new installation, so this may be a common pitfall with installation or configuration.

    Thanks Aditaya. I didn't know the DesignTimeService. There is no problem, and I had already checked the other parameters.

    Looking at the logs it turns out that the JVM memory failed. Increase the memory solved the problem.

  • create the Application performance report

    All,
    pages/IAM trying to implement the analytical report / / graphic to show the performance of the application several times. What is the best way to do it? Thanks in advance.

    Take a look at the following views of apex

    apex_workspace_activity_log

    apex_workspace_access_log

    Gus

    Published by: Gus C Sep 6, 2012 22:29

  • On the issue of the port already in use and multiply the application instance?

    I use the message connection to receive sms. When I restart the application, I found the already used port exception. I've been through many posts and believe that BB allows a UNIQUE APPLICATION connecting the port of sms at a time. But the port of sms I know certainly is used only by my candidacy, is somehow wrong to create a second instance of application trying to access this port?

    This question confused me a lot of time, to appreciate someone give me a help.

    This problem has been resolved.

    The two possible solutions for this problem:

    1 re - save the connection string for registery push in the start method. but avoid registering a new when enforcement is woken up by sms push, otherwise it won't get the message.

    public void startApp()
{
 String[] list = PushRegistry.listConnections( true );
            boolean isByPush = (list != null && list.length > 0) ? true : false;
            if(!isByPush)
            {
                PushRegistry.unregisterConnection( connString );
                PushRegistry.registerConnection( connString,Test.class.getName(), "*" );
            }

            bbReceiveSmsThread = new BBReceivingSmsThread(connString);
            bbReceiveSmsThread.start();        

}

    private static class BBReceivingSmsThread extends Thread
    {
        private boolean stop = false;
        private MessageConnection mc;
        private String connString;

        public BBReceivingSmsThread(String connString)
        {
            this.connString = connString;
        }

        public synchronized void stop() throws IOException
        {
            stop = true;
            mc.close(); // Close the connection so the thread returns.
        } 

        public void run()
        {
            try
            {
                mc = (MessageConnection)Connector.open(connString);
                for(;;)
                {
                    if ( stop ) return;

                    Message message = mc.receive();

                    String text = null;

                    if( message instanceof TextMessage ) text = ( (TextMessage)message ).getPayloadText();
                    if( message instanceof BinaryMessage ) text = new String( ( (BinaryMessage)message ).getPayloadData(), "UTF-8" );

                    if(text != null)
                    {
                       //do your message here
                    }
               }
          }
          catch (Exception e) {}
        }
    }

  • Failed to create the application of planning through traditional Application 11.1.2

    The URL of planning I try to create a test application in my development environment. To finish I have error "treatment request check the log for details"

    Scoured the server and it is impossible to find the 'diary '. Anyone know what the name of the error log to create a classic application in Hyperion Planning?

    JTS

    John,

    This trick you show us in regedit to 9.3.1 is now automatic in 11.1.2. Someone at - it get vague planning errors log files below:

    drive letter: \Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\logs
    drive letter: \Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\services

    JTS

  • Unable to create the application server connection

    I am creating an application server connection in jdev to my server-91.
    I checked the credentials and I'm getting an error on the test connection IE

    JSR-160 LENGTH tests... failed.
    Cannot establish the connection.
    JSR-160 DomainRuntime... skipped tests.
    JSR - 88... skipped tests.
    JSR-88-LOCAL... skipped tests.
    JNDI... skipped tests.
    JSR-160 tests edit... skipped.
    Tests of HTTP... success.
    Test server MBeans model... skipped.

    1 of 8 successful tests.


    -When I check the connection on my server-91, its working fine with the same information of identification, but on my machine, is not.
    I entered the ip of the host proxy and browser preferences.

    In my host also file there is the entrance.

    Help, please

    can you try to disable the proxy settings in jdev, restart and try again?
    are you sure that your use of the correct server address (no mixup of admin / managed server)

    Published by: Eric Elzinga on October 6, 2010 22:29

  • Failed to create the application after the last update...

    Screen Shot 2013-01-28 at 22.45.34.png

    Since the last update a few days ago, I was able to launch the DPS App generator... Can anyone help?

    Thank you.

    Michael

    Have you tried to uninstall the App Builder download new version update of the Adobe.com site?

    http://www.Adobe.com/support/downloads/product.jsp?product=182&platform=Macintosh

Maybe you are looking for