ERROR IDE #1 - help! (1415 S173 Toshiba)

Similar Questions

• Satellite 1415-S173 linux (ubuntu) - need Modem drivers

  I can't find the drivers for this model for any form of linux/unix on the toshiba driver page. I looked all over google, someone else has the same problem?

  Hello

  If you check the other postings in this forum in the field of Linux so you will find many statements on Linux on Toshiba laptops.
  The fact is that Toshiba doesn't? t design and support all the drivers for the Linux operating system.
  If you want to use Linux, then you must use the Toshiba drivers because the drivers of Toshiba are designed only for the Windows operating system.

  As far as I know the Satellite 1415 - S173 was designed for the U.S. market and it is not a European unit. The 1410 European Satellite uses a chip modem Askey (Lucent)
  I don't know if it will help you but you can try to use the Linux driver for the modem that supports this type of chip. Try a few glasses.

• ERROR IDE resolved #1

  Hello!

  Any person having the error IDE #1 is bios associated readers. Toshiba towers use high say Cable Select instead of low, as it is in the standard IDE/ATAPI, to detect the CD-ROM drive at startup. If you change the drive that is not an original Toshiba bios but there bios from another producer or whatever it is set for the weak signal of CSL. What you have to do?

  Download orginal bios Toshiba for your net support player or toshiba. 1 x 20-resembles the BIOS of Toshiba version number, account number, no letter in which x is the most high most recent bios, but I'm not sure about that. Create a disk with program flash (maybe v156teg) and bios in file hex takes place.

  Now you need to pull your drive of the laptop (don't ask me how do), unscrew the top cover (lost guaranteed ups) and connect the PIN JAE IDE connector on the earth pin 45 47 or 43.I used a sheet of money of chewing gum. You should pack a little to make a square 1 to 2 mm. Press down against some SMD resistance or capacitor (but make sure that there is no connection between the pins and SMD component). Check if there is a link between pin 47 and 45 with ohmometer. Put the reader inside your laptop. It starts from disk done ealier.

  If you did everything what correcly your PC bios Toshiba laptop does not display the IDE error #1 and the v156teg detects the drive and flash it with the new bios. Once the flash is made to take the piece of aluminum foil. Screw the disc and put your back toghether from the laptop. There, you have no IDE ERROR #1. You do so at your own risk.

  I take no responsibility for damage that is done to your laptop or drive.
  Temporary to solve this problem is to put the laptop to sleep and then wake him up to the top and now the disc is in the system.

  [Edited by: admin March 10 05 06:55]

  Hello

  Thanks for your extended help, your description was very helpful, but in my opinion, it is not recommended to do this kind of thing on your own with no technical training and expertise.

  Doing stuff like this on your own is risky and you can damage other hardware components.

  In such a case, the best thing to do is to contact authorized Service partner.

  Good bye

• Satellite A50-104: after DVD drive upgrade - error IDE #1

  Hello

  I have a Toshiba satellite A50-104 and to replace the SD - C2612 DVD standard player for a NEC ND - 6750 A DVD Writer but after reinstalling the drive and turn it on I get a message of ERROR IDE 1 before windows XP starts up and the drive is not recognized. I tried to detect the drive by using the Add Hardware Wizard, but it does not detect.
  Can you please help.

  Regards Gary

  Hello

  I'm not sure but I think that the Toshiba DVD r /-RW / RAM (number P000399450) drive must be compatible with the Satellite A50.
  It is also called DVD Super Multi drive, UJ-820BTJ6-A (G8CC0001S210)

  I found it on this page:
  http://www.impactcomputers.com/p000399450.html

  But generally the best way to control the compatible parts and devices is to contact Toshiba service partner in your country.
  Here, you will get all Hamade on the right parts.

• Satellite Pro A10 comes with: error IDE #0, PXE-E61media test failed

  I recently bought a used Toshiba Satellite pro A10.
  When I received it, it was working and being a noob I tried to install a network card and create a wireless network with my desktop using XP when it did not work I plugged my ethernet (from my desktop) cable on the laptop and flashed upwards with a small number can not? dll etc etc.

  Now I unplugged the ethernet cable and when I try to boot my laptop it comes up with:

  "ERROR IDE #0".
  Intel (r) bootagent, FE v4.1.09
  Copyright 1997-2002 Intel Corp.
  PXE - E61: Media test failed, check that the cables
  PXE - M0F: Exit Intel Boot Agent
  Insert system disk in drive
  Press any key ".

  HI Tom,

  The error message that you receive indicate that your laptop is trying to start the connection to the LAN rather than from his own hard drive or a CD-ROM. I suggest that you verify that the boot sequence is specified correctly in your BIOS, or alternatively, you can press F12 during your market and you should get the boot device menu sequence appears so that you can specify that you want to boot from your hard drive.

  Kind regards

• Need driver for Satellite 1415 - s173

  I don't know a lot about the laptop on the general, but I know that I need the driver for satellite 1415-s173 I don't know which driver do I need, except for the nvidia card that I can get to their site. Oh yes and I sound so I guess I don't need those.

  You are really funny guy. You are looking for something, but you n t know what you :D

  Nice story anyway
  The laptop seems to be a USA oldi

  Therefore, I recommend research on the form of the page for the driver Toshiba U.S. some drivers note; It is old so research in old laptop box
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

• Cannot install the update of security KB979402 for win2k ("Access denied" error)... help?

  for awhile now, I have not been able to install "Security Update for Windows Media Player 9 for Windows 2000 (KB979402)", through windows update. I always failed, and here are the steps I took:

  (1) tried to use windows update. the program launches, recognizes a necessary update, downloads the file and fails to install, leaving this error message:

  "the following updates were not installed:

  "Security Update for Windows Media Player 9 for Windows 2000 (KB979402).

  (2) reinstalled windows update agent according to the instructions here:

  http://social.msdn.Microsoft.com/forums/en-us/windowsdesktopsearchhelp/thread/c1d64ba5-AAA1-4EAE-AD04-d7e85418199e/

  I can't tell if windows update agent has been reinstalled successfully, but the problem persists.

  (3) tried to use http://www.update.microsoft.com/ where the file downloads but won't install.

  (4) manually downloaded "Security Update for Windows Media Player 9 for Windows 2000 (KB979402).

  tried to install, a message "error installation KB979402, Access is denied."

  5) tried to "force installation" by entering this in run:
  C:\WUAGENT\Windows2000-windowsmedia-KB979402-x86-enu.exe /wuforce

  who did get a weird window listed some "availible orders"... end, passing through update.microsoft.com again proves the update has not yet been installed. I'm now ideas. Help?

  Are you running Win2K SP4?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~~~~~~~~~~~~~~~~~~~~

  How to reset the Windows Update components?
  [Run the difficulty in default and aggressive mode]
  http://support.Microsoft.com/kb/971058

  NB: Access KB971058 via Internet Explorer (32-bit) only not any other browser.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot download videos on Facebook.  Receive the error message.  Help, please!

  Hello

  I have tried multiple times, but I can't upload a video to Facebook.  It goes through the whole process, and when it's done 'sending', he comes back with an error - unknown error.

  Help, please!

  Thank you!

  TheatricalMe

  Thanks for the reply. Please excuse in post numbered 3. I was typing the hard drive in one place and it has shown as "map". But, fortunately, I think you got the idea that I mention to the place in the post. I cannot fix this system.

  SG and all of us will be looking forward to your results.

  RTA

• I have a blank Memorex music CD - R stuck in my superdrive drive and it will not eject.  It does not seem to recognize that there is a disc inserted.  Any ideas?  Help - I'm a rookie.  :)

  I have a blank Memorex music CD - R stuck in my superdrive drive and it will not eject.  It does not seem to recognize that there is a disc inserted.  Any ideas?  Help - I'm a rookie.

  It worked - search for "Terminal" and then type "drutil eject external" thanks for the help.

  DiabloDog

• Satellite Pro 4290: How to solve the problem of error IDE #1

  I recently purchased a DVD - ROM drive to put my optical drive Sat Pro 4290 a CD in DVD - ROM. As suspects, I am the problem if the drive is not recognized and get error IDE #1.

  I can get windows XP to recognize the disk by deleting the secondary IDE channel in the material and then look up the new material again. Then installs the IDE channel and then detects and installs the DVD-ROM and works very well. I restart the computer laptop and back to square one!

  I understand that it is something to do with the settings of the motherboard and someone has solved this welding pins in different locations on the IDE connectors.

  I don't want to risk it and I was wondering if anyone finds an easier way to do it?

  Thank you very much

  Hello

  > I understand it's something to do with the settings of the motherboard and someone has solved this welding pins in different locations on the IDE connectors.

  Set to true if not 100%. This isn't a matter of adjustment on the motherboard, but the setting of the CD/DVD drive.
  The Player supports different master\slave\c-salt settings and if they are not compatible BIOS does not correctly recognize drive.

  On external hard drives (for desktop) it s possible to change these settings by changing the jumper, but it is not possible for readers portable slim.
  Portable settings are stored in the firmware!

  I found various non-legal tools that can change the master/slave/c-salt settings but I wouldn't recommend using it.
  The risks are too high so that the reader will have some damage.

  So, try to replace the drive with a compatible

• Satellite 1410-304: how to solve the error IDE #1?

  I read on the pins of connection 45 & 47 to solve 'error ide #1' and my question...
  How to change of mode c / salt/slave differently (without connecting pins)?
  I bought liteon dvd - RW drive (sosw - 833 s 51 c) and satellite 1410 304 facility and my laptop will not work with this drive (at startup 'ide #1 error', os do not drive)

  Hello

  I'm not 100% sure but c-salt/slave can not be changed. It is factory defined essentially as slave.

• Satellite Pro 6100: disk not recognized HARD - error IDE #0

  I just replaced a failed HARD drive from MK4019GAX in my 6100 Pro of the Satellite with a MK4026GAX and have tried to install XP Home. I can't recognize the hard drive of the computer.

  When I boot, I get a message ERROR IDE #0 before installing Windows, then a message saying that all third party SCSI drivers should be installed first. (I'm starting with the Windows disk in the drive) then when it is at the end of the installation process a message saying that "put in place did not any hard drives installed in your computer.

  If I boot without the Windows I'm getting PXE - E61 Media test failure.

  When I go into the BIOS ACPI BIOS version 1.90, under devices "Mode HDD = used (s) ' I can't get in to change and there is nowhere else that seems related to the hard drive (apart from the boot priority section).

  I read on a forum somewhere that there could be problems getting the BIOS to recognize a new HARD drive.

  It is a common problem for this model, or is the new hard drive may be defective?
  Is there a workaround or a solution?

  If all requested assistance right.

  DM

  Hello

  This error message indicates that the HARD disk drive was not properly acknowledged. The fact is that this unit uses a regular IDE (ATA-5) interface and the new HARD drive is supported by this interface.
  In this case, I assume that the HARD drive has not been installed correctly. Try to remove the HARD drive and check the connections.
  The other possibility is that the HARD disk controller is dead.
  In this case, the service partner must check the laptop.

• Sat Pro 4270: Error IDE on the first commissioning.

  I'm putting a DVD/CD-RW but get error IDE at first startup (before message screen)
  Loaded with new BIOS 2.70 TRAD but not go
  New drive is a Compal TSB24H1 Combo (Brand new)
  Do I need a different connector

  Hello

  I agree with littco. If the two devices, the HARD drive and the CD/DVD drive are set to master or slave, in this case you get an error of the IDE controller.
  As far as I know it of not possible to change the settings manually. :(
  To resolve this problem, you need a compatible player.

  Good bye

• I have a problem whit security for Microsoft Works 8 (KB977304), appear always 646 error Code? Help, please!

  I have a problem whit security for Microsoft Works 8 (KB977304), appear always 646 error Code? Help, please!

  Hello
  
  1. what operating system do you use?
  2 are you able to install all other updates on your computer?
  Try to download and install the update from the link below and check for the issue.
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=807426a1-8b78-4681-A606-dc39f4d7b64a
  For more information visit http://support.microsoft.com/kb/977304
  I hope this helps.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Computer Mangement.lnk unspecified error. Please help me by saying its cause and what could be the solution for it.

  Computer Mangement.lnk unspecified error. Please help me by saying its cause and what could be the solution for it.

  Clear the error on windows server 2008. All of the above files are locked.  We maintain active directory on and it is also not working.

  Help, please.

  Hello

  I suggest you to ask your question at the following link.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/

  I would also ask you to contact your IT Department for further explanations.

  I hope this helps.