Create the role in each ESXi host

Similar Questions

• Do I need an IP NIC of each Esxi host address?  VMs needs access to the storage network?

  Hi all

  The issue go, I have a host machine with 3 nic cards - > 1 for production network, 1 for the management network and 1 for the network backup.

  The guest PC VM inside will be connected to the 3 network,

  But for the host himself, will be used for management and backup only.

  T1) is the bears from production on the need for level ESXI host having an IP address as well?

  =================================================================

  Right of Q2) now my host use internal storage. If I'm to migrate to a SAN storage, I have 1 more network for storage.

  I understand that the configuration of virtual machines and their data are assigned and stored in the data store that is made visible at the level of the host.

  They must for the virtual machines access the data store, join the storage network as well? or they are access to the storage through the host

  ================================================================

  Kind regards

  Noob

  T1) is the bears from production on the need for level ESXI host having an IP address as well?

  A NIC itself does not require an IP address. Which IP addresses are required for VMkernel port groups (for example, networking, vMotion, storage access,...) as well as virtual machines.

  Right of Q2) now my host use internal storage. If I'm to migrate to a SAN storage...

  No, a virtual machine (i.e. the guest operating system) does not require access to the system of storage, only the ESXi host.

  André

• I want to create the link (to each row) in my detail page < < < < < in order, the articulation between (detail page 1 < < < detail 2).

  I want to create the link (to each row) in my detail page < < < < < in order, the articulation between (detail page 1 < < < detail 2).

  Hello

  f9afc1ea-f5a4-4400-A33A-187e03664d82 wrote:

  I want to create the link (to each row) in my detail page< in="" order="" to="" linking="" between="" (detail="" page="" 1="">< detail="">

  Change your column on which you want to create the link

  go to declare attributes-> column change-> under the column link

  1. Select a text link (you have option available under the link text select one of these option)

  2 target - > application Page

  3 page-> page not on which you want to redirect

  If you want to pass a value then

  Item1-> select an item in the page detail2

  values-> that you want to move the page pos.1

  see this screen shot for reference

  

  Hope this helps you,

  Kind regards

  Jitendra

• I would like to know the role of each thread on the coherence

  Help me.
  I would like to know the role of each thread on coherence.
  There are too many kinds of discussions.
  
  Example ~.
  --------------------------------------------------------------------------------------------------------------------------------------------------
  GC GC RUNNABLE slave slave
  RMI TCP TCP RMI-1972 accept accept 1972 RUNNABLE
  Track subscriber Health Center track subscriber RUNNABLE Health Center
  LT = 0:P = 342534:O = 0:port = LT 55170 = 0:P = 342534:O = 0:port = RUNNABLE 55170
  Attach the loop to wait API API wait loop tie RUNNABLE
  PacketListener1 PacketListener1 EXECUTABLE
  PacketListener1P PacketListener1P EXECUTABLE
  PacketListenerN PacketListenerN EXECUTABLE
  Cluster | Member(ID=1, timestamp=2013-04-05 10:45:44.655, Address=192.168.240.157:8088, MachineId=50044, location=site:,machine:TMTEST-PC,process:5316, Role=CoherenceServer) Cluster. Member(ID=1, timestamp=2013-04-05 10:45:44.655, Address=192.168.240.157:8088, MachineId=50044, location=site:,machine:TMTEST-PC,process:5316, Role=CoherenceServer) EXECUTABLE
  RT = 0:P = 342534:O = 0:TCPTransportConnection [addr = 192.168.240.157, = 55178, local port = 55170] RT = 0:P = 342534:O = 0:TCPTransportConnection [addr = 192.168.240.157, = 55178, local port = 55170] RUNNABLE
  Thread finalizer finalizer thread RUNNABLE
  WT = 10 WT = 10 RUNNABLE
  Main TIMED_WAITING main
  IpMonitor IpMonitor TIMED_WAITING
  Invocation: management: EventDispatcher Invocation: management: EventDispatcher TIMED_WAITING
  Invocation: Invocation: management of the TIMED_WAITING
  DistributedCache DistributedCache TIMED_WAITING
  JMX server connection timeout JMX server connection timeout 52 TIMED_WAITING 52
  RMI Scheduler (0) RMI Scheduler (0) pending
  WAITING for Thread-6 wire-6
  stop the server to JMX on stop stop JMX server during the stop pending
  Logger@9228429 3.7.1.7 Logger@9228429 3.7.1.7 pending
  PacketReceiver PacketReceiver pending
  PacketPublisher PacketPublisher pending
  PacketSpeaker PacketSpeaker pending
  WT = 7 WT = WAITING 7
  WT = 9 = WAIT 9 WT
  -----------------------------------------------------------------------------------------------------------------------------------------------

  Briefly

  PacketListener1 PacketListener1P PacketListenerN - listen to threads of e/s for TCMP transport protocol
  Cluster. Member (Id = 1, Timestamp is 10:45:44.655 2013-04-05, address = 192.168.240.157:8088, MachineId = 50044, location = site:, machine: TMTEST-PC, process: 5316, role = CoherenceServer) -main thread for the cluster service (discovery, node joing / exit, etc)
  IpMonitor - monitor IP, is involved in the detection of death system
  Invocation: management: EventDispatcher -thread expedition event for JMX service distributed in coherence
  Invocation: management -main thread for JMX services distributed in coherence
  DistributedCache - main thread for the cache service DistributedCache
  Logger@9228429 3.7.1.7 - wire consistency async logging
  PacketReceiver - wire incoming network packets
  PacketPublisher - wire, sending packages via TCMP
  PacketSpeaker - wire, sending packages via TCMP (discharges of some PacketPublisher work for the better use of Basic)

• copy the vm-support journal ESXi host bundle

  Can anyone suggest a way for me to make the beam of vm-support of an ESXi 4.0 Update 3 host? We don't allow SSH on our hosts for SCP and Veeam FastSCP came out. I tried several PowerCLI remote CLI commands and vMA and nothing seem to work. Any suggestions?

  We create the bundle in unsupported mode and it seems to store the .tgz under/var/usr file but I do not see the file when I navigate to the folder on the vMA. I guess it is because another user (root) creates the beam and I am connected at VMAs with vi-admin.

  When I run the command vifs.pl: alive < connection_options > g ' VM/VM.txt [StorageName]. "
  Z 'ha-datacenter""tmp/backup/VM.txt. "

  RCLI file cannot be located

  When I run:

  Get-Host HostNameOrIP | Get-Log -Bundle -DestinationPath c:\Storage\Location\

   

  with Powercli I get the following error:

   

  Get-Host: A positional parameter cannot be found by accepting the argument ' *. **
  .**.**'.
  Online: 1 character: 9
  + Get-Host < < < < *. **. **. ** | Get-Log-Bundle - Destination c:\
  + CategoryInfo: InvalidArgument: (:)) [Get-Host], ParameterBindin)
  gException
  + FullyQualifiedErrorId: PositionalParameterNotFound, Microsoft.PowerShell
  . Commands.GetHostCommand

  (I replaced the IP with * for reasons of confidentiality)

  Allows SSH really my ONLY option?

  Your partition you want to pull the bundle of newspaper are there enough space? Sometimes, the size of the file for this could be huge. To check the free space on the Service Console, use "vdf h", the v includes VMFS, while "df-h" excludes VMFS.

  So you might want to change the location where empty you these files.

  You can also manually run vm-support - w/vmfs/volume/guid. Where guid is the guid a volume with a lot of space.

  /etc/opt/VMware/vpxa/vpxa.cfg will actually show you where your logs are generated by default, and the number of files you have. Try to move / backup the files in/usr/lib/vmware/hostd/docroot/downloads. This contains all the files in package old newspapers. This should free up space to run the command vm-support.

  And Yes, you can try to activate SSH to see if that helps too.

  I hope this helps.

  Clement

• 8.3 OMSA @ ESXi 6.0 U2 @ R515-&gt; cannot log into the website OMSA to ESXi HOST.--

  Hello guys.

  I've updated my ESXi of U3 5.0 to 6.0 U2 and I lost my OMSA. I can not connect from the web page.

  For the update of the host, I used this ISO file:
  . VMware-VMvisor-Installer-6.0.0.update02-3620759.x86_64-Dell_Customized-A00.iso

  After that, I installed OM-SrvAdmin-Dell-Web-WINX64-8.3.0-1908_A00. EXE to a VM W2012S to this host. I can open the web site to connect, but when I try to connect to my ESXi HOST, I received this message: failed to connect... connection error.

  When I saw that I began to check a few things, I ran: 'list of vib software esxcli' and I saw:
  Name Version Date seller installation acceptance level
  ----------------------------- ----------------------------------- ------ ---------------- ------------
  ...
  OpenManage 8.3.0.ESXi600-0000 Dell PartnerSupported 2016-07-29
  Reference Dell-configuration-vib 6.0 - 2A 00 Dell PartnerSupported 2016-07-29
  iSM 2.3.0.ESXi600 - 0000 Dell PartnerSupported 2016-07-29
  ...

  Another very strange for me, is that I can't see any reading of the sensors to Interface web server: HOST /... / or Vsphere Client.
  But I can read a large number of web page Idrac and ESXi SSH data using ' esxcli ipmi sdr list material.
  Node-sensor Description-reading raw reading of raw Timestamp/comment base calculated entity Instance
  ----------- --------------------------------- --------------- ---------------- ----------- ----------- ------------------- ---
  0.1 1 Temp 3.1 processor 38 degrees C 166 2016-08 - 01 T 14: 18:32
  0.2 2 Temp 3.2 processor 34 degrees C 162 2016-08 - 01 T 14: 18:32
  0.5 power 1 10.1 Temp 40 degrees C 168 2016-08 - 01 T 14: 18:32
  0.6 power 2 Temp 10.2 37 degrees C 165 2016-08 - 01 T 14: 18:32
  0.7 power Supply 2 Temp ambient 10.2 26 degrees C 154 2016-08 - 01 T 14: 18:32
  0.8 power Supply 2 Temp ambient 10.2 28 degrees C 156 2016-08 - 01 T 14: 18:32
  0.12 system Board 1 BIO Temp 7.1 44 degrees C 172 2016 - 08-01 T 14: 18:32
  0.14 front Panel Board 1 Temp ambient 12.1 16 degrees C 144 2016-08 - 01 T 14: 18:32
  0.13 system Board 1 Temp Planar 7.1 28 degrees C 156 2016-08 - 01 T 14: 18:32
  0.10 memory Module 1 Temp 8.1 24 degrees C 152 2016-08 - 01 T 14: 18:32
  0.11 memory Module 2 Temp 8.2 36 degrees C 164 2016-08 - 01 T 14: 18:32
  System of 0.48 to edge 1 FAN MOD 1A RPM 7.1 2760 RPM 23 2016-08 - 01 T 14: 18:32
  System to 0.49 to edge 1 FAN 1 b MOD RPM 7.1 0 RPM 0-2016 - 08-01 T 14: 18:32
  System of 0.50 to edge 1 FAN 2 a MOD RPM 7.1 2760 RPM 23 2016-08 - 01 T 14: 18:32
  System of 0.51 to edge 1 FAN 2 b MOD RPM 7.1 0 RPM 0-2016 - 08-01 T 14: 18:32
  System of 0.52 to edge 1 FAN MOD 3A RPM 7.1 2760 RPM 23 2016-08 - 01 T 14: 18:32
  System of 0.53 to edge 1 FAN 3 b MOD RPM 7.1 0 RPM 0-2016 - 08-01 T 14: 18:32
  System of 0.54 to edge 1 FAN MOD 4A RPM 7.1 2760 RPM 23 2016-08 - 01 T 14: 18:32
  System of 0.55 to edge 1 FAN MOD 4 b RPM 7.1 0 RPM 0-2016 - 08-01 T 14: 18:32
  System of 0.56 to edge 1 FAN MOD 5A RPM 7.1 2760 RPM 23 2016-08 - 01 T 14: 18:32
  System of 0.57 to edge 1 FAN MOD 5 b RPM 7.1 0 RPM 0-2016 - 08-01 T 14: 18:32
  Power supply 0.148 1 1 current 10.1 0.6 amps 15 2016-08 - 01 T 14: 18:32
  Power 0,149 2 current 10.2 2 0.48 amps 12 2016-08 - 01 T 14: 18:32
  0.150 1 power supply 1 10.1 206 Volts 103 2016-08 - 01 T 14: 18:32
  0.151 power 2 2 10.2 206 Volts 103 2016-08 - 01 T 14: 18:32
  System of 0,152 onboard System 7.1 220 Watts 22 2016-08 - 01 T 14-1 level: 18:32

  The details of the server are:
  BIOS 2.3.0
  IDRAC 2.85 (Build 04)
  Lifecycle controller 1.7.5.4

  Any kind of help to connect to the host ESXi OMSA is welcome!

  This is the correct service.

• Should the RAM for an ESXi host replaced the same ones remaining?

  Hello

  We are running a cluster of servers ESXi 5.1 - 2 of them are Xeon E7440 2.4 GHz (64 GB of RAM) and 1 of them is Xeon X 5460 3.16 GHz (32 GB of RAM).

  Currently, the use of the memory of all three ESXi hosts are about 60%.

  We will replace the Xeon X 5460 server with a new physical server.  We would like to ask for your opinion how much RAM you must order (my manager of door on the cost of the new server).

  Thank you

  Hi again Tony,

  1. No, it is not high at all. You should begin to worry about this, after reaching approximately 85-90%.
  2. My short experience with clusters of memory-unbalanced, adding that more memory would be a lot like the DRS manages memory locations & 'kindness host' in the right direction, but I'm not really sure how that would turn out in the long term. If you decide to present more memory to your server, it would be possible to upgrade the other two guests sooner than later
  3. Yes, ask the seller would be the right thing to do. Please note that you will need to put in place an enhanced vMotion to conform to your next "older" CPU then, because you'll have something other than X 5460. I guess you'll have to "intensify" a generation or two, depending on what you have found.

• Migrate the replication for patching ESXi host device

  Hi guys,.
  

  
  

  I'm trying to Storage vMotion/migrate vSphere replication device to different host for ESXi patches. I get the following message
  
  "This entity is managed by VR management solution. It is not recommended to edit it directly. Instead use the GPMC for the solution if you want to make changes. You want to proceed. "
  
  I use vSpere replication without the SRM device. What is the best approach to upgrade ESXi host where there is replication Appliacce. Should I just stop then move the unit, or is it possible to move it while it is running?

  
  

  Kind regards

  
  

  MQ
  
  

  Hello

  Moving the unit via the technology Vmware is perfectly fine.

  The message/warning you receive is just to warn you that this VM is a critic and you must be careful. The same message if you invoke the power out of this machine.

  Kind regards

  -Martin

• Install the HBA drivers for ESXi hosts

  We currently have a plan to install a new system with our spare essentials vCenter license, Emulex HBA cards in the DELL gear that we will make our ESXi hosts.

  
  How to configure adapters HBAS in ESXi, can we recommend has someone already installed drivers Emulex HBA in an ESXi host?

  
  Defining the ESXi host should not be a problem, but it is just to install the drivers in ESXi I'm stumped.

  What version of ESXi, you install? Check the VMware HCL for IO devices and if you HBA is compatible, try to do a default install and maybe the ESXi will recognize and load the drivers without having to do any additional setup.

  VMware Compatibility Guide: search for i/o device

• How to get the material status of ESXi host of external surveillance system?

  Hello!

  I've got hardware ESXi host information (for example, CPU, disk, etc.)

  that I want back outside a vCenter/ESXi for an external monitoring system.

  I really really slighty possible via Powershell saw...

  Thanks for your help!

  Hello

  the link that I commented, explian how to monitor the status of the ESXi hardware by using the cmdlets for powershell CIM 3.0.

  Not the virtual machines

  This, will you?

  Check this code from the link, you should notice that connects to an esxi host, not virtual machines:

  import-moduleCimCmdlets

  2	$ipaddress="10.20.177.15"

  3	$HostUsername="root"

  4	$CIOpt= New-CimSessionOption-SkipCACheck -SkipCNCheck -SkipRevocationCheck -EncodingUtf8-UseSsl

  5	$Session= New-CimSession-Authentication Basic -Credential $HostUsername -ComputerName $Ipaddress -port 443-SessionOption$CIOpt

  6	Get-CimInstance-CimSession$Session-ClassNameCIM_Fan

  Best regards

  Pablo

• Quick newb question: possible to 'navigate' the file on an ESXi host computer system remotely?

  As the subject says: is it possible to 'Browse' the file system to an ESXi host through a GUI tool on the server vCenter Server, instead of having to navigate this one via e.g. puTTY?

  JH

  OK... think about it. WinSCP and enabling SSH on the host computer ESxi is the key.

• Create the role attribute to a recipient user after user approval - IOM 11.1.2

  Hi all
  
  I ve created a composite custom for creation of the user. Once a user of the applicant (for example user-R, other than the xelsysadm) creates a user (say User1), he would go to approaval to the Manager of the applicant (say user-RM). Once the applicant manager approves the request, the user is created in the IOM.
  
  Now, once the user is created, I need to assign a role personalized the User1 by using APIs. For some reason, we will not use the role membership rule.
  
  
  My Situation
  ----------------
  -J' created a handler for post (for MODE = CRΘER) which generate custom "user login" and also assign a role personal to the user. Role was being entrusted "Beneficial user" if created by "xelsysadm", for, there was no approval triggered.
  
  But when I create one recipient user with other than 'xelsysadm', the workflow is triggered and role assignment is a failure in the event handler.
  
  Please suggest me a way to assign the role (using API) on the 'recipient user', once the application is approved by the assignee.

  See the Article: 1532267.1

  -Marie

• Looking for lists of the virtual machine running on the power of cli ESXi host

  Hello

  I want to export the virtual machine lists running on the respective host in a cluster, but it generates the error after running the command.

  Get-Host esx011 | Get - VM

  PowerCLI C:\ > esx011 get-home | Get - VM

  Get-Host: A positional parameter cannot be found that accepts arguments

  'usjacpvesx011 '.

  On line: 1 char: 1

  + esx011 get-home | Get - VM

  + ~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: InvalidArgument: (:)) [Get-Host], ParameterBindin)

  gException

  + FullyQualifiedErrorId: PositionalParameterNotFound, Microsoft.PowerShell

  . Commands.GetHostCommand

  No idea where I need to correct. I want to export to csv

  Thank you

  vm2014

  What should we not Get-VMHost?

• Access the SMB storage using esxi host and manage with MS server 2008

  Hi there, I know the subject line can be confusing, but I didn't know how to explain what I need in the line object in such a short sentence.

  in any case, I have a storage device SMB, a Promise VTrak M610P, which is attached to a blade server 1U HP through interface channels double Ultra 320 SCSI host. I can't configure the VTrak as a NFS, the only way to access logical drives is connected to a server via the scsi channels and using the operating system to share the drive and the shared disks.

  I would use a server blade with dual ultra 320 SCSI host interface channels and connect the VTrak to this server blade. Then I would install ESXI hypervisor OS 5.5 to this server blade. I want to know is if the ESXI operating system will recognize the logical drives and if I create a virtual machine with MS server 2008 and see if the virtual machine detects logical drives, so that I can share the drives? I hope that I'm supposed to and if I'm not, please let me know what makes no sense, I will do the best to explain it better.

  Thank you

  Andy

  So it turns out that there seems to be something wrong with vClient when you add a hard disk (virtual disk) to a virtual machine of size greater than 4 TB. Article VMware KB: value of range error message when you add more than 4 TB capacity discs in vSphere Client describes this if you encounter this problem, add the hard drive via vSphere CLI, CLI power or vmkfstools. So this seems to be a known issue on vClient. What I ended up doing was using vClient, creation of hard disk, adding to the virtual machine (size of the hard drive is to 5.45) and when I would get the error message on the DiskCapControl out of reach, I would just click OK and then finalize the creation of the hard drive on the virtual machine. Once the process is complete, I selected the virtual machine and noticed that he indeed added a new HDD size 5.45 TB even if he's complained about it. I pulled to the top of the virtual machine with windows server 2008 R2 installed and was able to create a new disk under windows and set it up as a shared drive on the network. Looks like vClient must be updated by VMware and correct this bug, if it's a bug that I think. Thank you for the help vervoort!

• vSphere client using the name Netbios on ESXi host does not connect using the credentials of a Windows session

  I have 3 ESXi 5.5 hosts, all connected to a single server vCenter, where we try to authenticate directly to the host by using the windows logon credentials. I have installation of the Administrators group of ESX and filled with the admin accounts that I want to be able to authenticate to the host. The Netbios name of the domain is tstdomain (for example) where the domain name is tstdomain.com. If I connect directly to a host and check the checkbox 'Use Windows Session Credentials', the vSphere client will default by using the Netbios name of tstdomain\adminusername and the connection will fail indicating that the username and/or password is incorrect. If I enter the domain name of tstdomain.com\adminusername, I am able to connect to the host without error.

  Does anyone know how get past that this matter have the vSphere client uses the domain name or to use the Netbios name and connect with the credentials to active directory? I looked by editing the file/etc/hosts and checked that the SPN of the host is correct in active directory with the command hostname setspn - l, with no luck on one. I also tried to change the field of research for the Netbios name of tstdomain rather than the tstdomain.com domain name, also did not work.

  Thanks in advance for your suggestions on how to correct the problem.

  Seems that this issue was due to a slow network and the connection timeout when you try to talk to the domain controller. I am able to connect with windows creds now, but the connection is very slow. I increased the default period of 30 to 60 seconds to help work around the problem.