create the table on the logical standby database

Similar Questions

• Enterprise Manager on the logical standby database

  Hello

  I just put in place a system of logical standby database.

  Is it possible to install the Manager of the business on the logical database?
  Since it works in "read only mode", I'm not sure about this

  Concerning

  Christian

  Enterprise Manager can be used to monitor and manage backup of database, logical and physical targets.

  See you soon,.
  Brian

• ORA-01403: no data found on the LOGICAL standby database

  Hello
  
  Logical question of Eve:
  Enterprise Edition Oracle 10.2.0.2.
  
  M work waiting LOGIC for 1 year but still i have not had this...
  I m not be countinuously no data foud errror on the logic of the standby database.
  
  I found the table causing the problem (db_logstdby_events) and jumped this table and table instantiated using the package bwlow:
  
  exec dbms_logstdby.instantiate_table (...)
  
  but when I start to apply the logical waiting process it gives again some were found for the new data table:
  
  I even tried to instantiate the table to EXPORT/IMPORT assistance over time, but the same problem same deal with.
  
  As much as I knew abt the error that is:
  Table1:
  ID
  10
  20
  30
  
  
  Now if sql apply processes on standby logic tent performs the operation of (for example) updated as below
  
  Update table1 set id = 100 where id = 50;
  
  above request will not be completed cos he'll never find 50 values which is not in the table. That is why this error coming...
  
  
  Now my concern is... no user didn't dare change/make of such changes on the logic ensures. So if there is no change in the tables, then apply it sqll should get all the values to be needded for an update...
  
  watingggg guyssss...

  Hello;

  How do you know that the database pending is compatible with the primary?

  Are there opportunities has one or several tables have been created on the eve before they were created on the primary? (If Yes check in DBMS_LOGSTDBY. INSTANTIATE_TABLE)

  Or jump and re-instantiate the table.

  Example of

  EXEC DBMS_LOGSTDBY.SKIP('DML','EMPLOYEES','%');
  
  EXECUTE DBMS_LOGSTDBY.INSTANTIATE_TABLE  ('YOUR_USER', 'EMPLOYEES', 'YOUR_DBLINK');
  

  Best regards

  mseberg

• How to remove the configuration of logical standby database cleanly

  Hello

  We are on the BSG with 11.2.0.3 version of DB. For unknown reasons, we would like to recreate the logic of the standby database and for this I want to cleanly remove/uninstall/remove LOGIC of DATABASE of the EVE of the DATA GUARD configuration that we have.

  Setup of the DG has already 1 PHYSICAL STANDBY DATABASE that works very well. PRIM, PHYSICAL and LOGIC are all on different HOSTS. Could you please guide or we suggest exact MOS Doc id in this regard? I found an MOS Doc id which is close enough, but its steps include dg configuration completely deleting what I don't want. Only the logical Standby database must be delete itself so that it can be installed again properly.

  We use the CONTROL GRID and DATA GUARD BROKER.

  Bundle of thanks in advance.

  Best regards

  Hello

  Thank you very much.

  What I have is:

  -DROP DATABASE (from logical database in standby)

  -asmcmd > and removed the rest of the orphaned files related to the logical database.

  -DGMGRL > remove the database logicladb; one

  -Grid control > removed from here

  -deleted the database logical PRIMARY related to logic, for example, log_archive_config.

  Other steps > ID note (Doc ID 733794.1) about the LOGIC of STANDBY DATABASE (I think that MINING regarding)

  She's.

  Best regards

• How to create the logical tables & how to give joints according to obiee 11g?

  Hello

  I have again to obiee 11g. I want to create the logical tables in MDB layer.

  After that I want to give joins according to MDB.

  I don't know, how to create the logical tables and how to give joints according to obiee 11g?

  Please help me.

  Thanks in advance,

  A.Kavya

  Hello

  The new logical table is right click on the MDB itself, for the join you generally in the business model diagram (again right click on objects).

  Maybe it's better if you start from a kind of tutorial to at least have an overview of what is happening where (layer business and physical layer etc.).

  Take a look at what Oracle has available: Oracle BI EE 11 g

  And no doubt, it can be a good start: https://apexapps.oracle.com/pls/apex/f?p=44785:24:0:NO:P24_CONTENT_ID, P24_PREV_PAGE:9787, 2

• Block corruption on the physical Standby database

  Hi all

  Operating system: HP Unix

  DB: 10.2.0.4

  We are facing corruption block on our database of physical intelligence. The same has been detected using commands below and several blocks were found to be corrupt.

  RMAN > backup validate check the logic of database;

  SQL > select * from v$ database_block_corruption

  As it is a basic data watch no backup is present, pulling the command below did not help

  RMAN > list of corruption block restoration;

  I think taking the incremental backup of the PR and the same application on DR, y at - it another way to eliminate corruption said?

  Kind regards

  Sphinx

  You can check below link if corruption block results nologging, there is a thread already with the question.

  Block corruption on the standby database

  10.5.2 steps of recovery for databases physical standby

  Data protection scenarios

• not able to create the logical complex join in the Administration of BI 10.1.3.4.1.

  Hello
  
  I am facing this strange question in the business model. While I am able to create the logic of foreign keys (which, according to the documents, should not be created), for some reason I'm not able to create logical complex joins.
  Actions:
  (1) manage / joined... joined by Manager: Actions / new / logic to join...
  (2) in the window "join logic", I select the tables, BUT I can not choose any column (her are shown in "Column," drank lists these lists seem to be disabled)... .and combo box operator is disabled
  
  Same result when trying to view "Diagram of logical table" and a "new complex joining" from one table to the other drag-and-drop...
  
  Doesn't seem to be something related to this particular business model, because now it happens to all business models I... funny that there are some former complex logic is associated with some of my old business models
  
  Any ideas?
  
  Thank you!
  
  Published by: alex.v on June 2, 2010 17:10
  
  Published by: alex.v on June 2, 2010 17:15

  Exactly!

• Could not create the link of database of the schema of the ORA/APEX

  Hello

  I tried to create the link of database for my schema oracle on my localhost and it brings me an error "database user has sufficient privileges for the proposed operation.". I don't know what the problem is?

  This pattern of localhost was created for APEX.

  Thank you

  I tried to create the link of database for my schema oracle on my localhost and it brings me an error "database user has sufficient privileges for the proposed operation.". I don't know what the problem is?

  This pattern of localhost was created for APEX.

  What is developer Sql has to do with the problem? This forum is ONLY for sql developer questions.

  If this isn't a problem with Sql developer please mark ANSWERED thread and repost it in the general forum of the database

  Database General Discussions

  The exception is you say the problem: the user you are using to create the DB link doesn't have the necessary privileges to create the DB link type you are trying to create. Privileges are required on the source and target databases.

  When repost you, you will need to provide:

  1. your full 4 DB for DBs source and target text segment

  2. a copy OF the sql * plus (or other) session you use to create the DB link

  3. information on the user that you use to create the link DB - including the privileges that have been granted to this ulser

  4 information on the type of link DB you try to create

• Get the FS-10260 10794 FS FS-10495 error to create the integrated safety database

  Hello
  
  When I try to create the example of integrated security of Oracle database manager. But when it tells me error, below
  
  Versions: client = 3.4.1 3.4.2 OS = Server =
  
  Operation: Creation of database 'Failsafe_DB' example on the node 'WIN1.
  Departure time: July 14, 2010 22:55:15
  Elapsed time: 0 minutes, 7 seconds
  
  1 22:55:15 introduction of clusterwide
  2 22:55:16 FS-10905: WIN1: from the creation of a stand-alone resource Failsafe_DB
  3 22:55:16 FS-10371: WIN1: perform initialization processing
  4 22:55:16 FS-10371: WIN2: run the initialization processing
  5 22:55:17 FS-10374: WIN1: collection of cluster information required to perform the specified operation
  6 22:55:17 FS-10374: WIN2: collection of cluster information required to perform the specified operation
  7 22:55:18 FS-10375: WIN1: analysis of the cluster information required to perform the specified operation
  8 22:55:18 FS-10378: WIN1: preparation for the configuration of Failsafe_DB resources
  9 22:55:18 FS-10906: WIN1: creation of the independent resource
  10 22:55:18 > FS-10635: created the file c:\oracle\ofs_1\fs\fssvr\sample\Fs_Var.ora
  11 22:55:18 > FS-10368: appeal to the SCW database to create the database example; This will take a few minutes...
  12 22:55:22 * ERROR: FS-10260: failure of the attempt to create database example autonomous Failsafe_DB
  13 22:55:22 > FS-10367: check the logs at C:\OraHome\cfgtoollogs\dbca\OFS1 for more details
  14 22:55:22 * ERROR: FS-10794: the Oracle database resource provider could not create the stand-alone resource Failsafe_DB
  15 22:55:22 * ERROR: FS-10890: Oracle Services for MSCS failed during the createStandalone operation
  16 22:55:22 * ERROR: FS-10497: from clusterwide canceling the operation
  17 22:55:22 FS-10488: WIN1: from decrease in price of the operation
  18 22:55:22 FS-10489: WIN1: completed the restoration of the functioning
  19 22:55:22 * ERROR: FS-10495: Clusterwide canceling the operation is completed
  20 22:55:22 clusterwide failed!
  
  Here, I describe what I've done,
  
  Configured the 2 node clusters in Windows Server 2008. (using Oracle VM)
  Installed Oracle failsafe 3.4.2 (on private drive)
  Installed Oracle 11.1.0.6.0 (on private drive)
  Service Oracle for MSCS is running.
  
  Now, I do not understand why the creation of the example database fails?
  
  If anyone knows about this problem, then please post a comment...
  
  Kind regards
  Manish

  Hi manish;

  Please check:

  FS-10726 when you add a database to a group of integrated security [124664.1 ID]
  OERR: FS-10495 Clusterwide reduction in the price of the operation was completed [70458.1 ID]
  Bug 5770080: CREATE the EXAMPLE of DATABASE FAILS WITH 10.2.0.3.0

  For your error checking which i belive will not help so mch, but please check
  OERR: FS-10794 resource %s provider could not create the stand-alone resource %s [137861.1 ID]
  OERR: FS-10260 attempt to create database example of standalone %s failed [50840.1 ID]

  Please also visit:
  Oracle® Fail NotesRelease release 3.4.1 for Microsoft Windows
  http://download.Oracle.com/docs/CD/E10736_01/doc/Relnotes.341/e10719/TOC.htm

  Respect of
  HELIOS

• Sdo_georaster support logical Standby database type of dose?

  Hi all
  Sdo_georaster support logical Standby database type of dose?

  Ylin wrote:
  Hi all
  Sdo_georaster support logical Standby database type of dose?

  in 10g no - http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/data_support.htm#CHDDCCIG

• create the back-end database and use forms to enter data

  Good day "" I am new to Oracle. I need to create a database backend from scratch and use the (scoring) forms to enter data.
  I downloaded Oracle forms 10 g and also Oracle 10g Express edition.
  Pls help me get started with the creation of database later can I specify the tables and use them to store the data, which came...
  Thank you...

  In general...

  > Create table for each separate feedback

  Probably wouldn't be ideal, but it would depend on the intent underlying the system under development. Using the RDBMS, with tables of related data, the layout and design of the right table (entity) is crucial.

  After relations are compries, and its checked the layout of schema (the database user (s), table) welcomes the objective underlying the system, index, table creation/loading, functions or procedures, tests, etc the boring tasks begin - and that's on the place where the fun part ceases ;)

• How to change the character of database defined on the physical standby database?

  Hello
  
  We hear a database to WE8ISO8859P1 character and migrated the character set using csscan/csalter scripts to WE8MSWIN1252. This database has a configuration also physical standby database, and after the migration, the database physical standby shows always defined as WE8ISO8859P1 character. How can I change the characters on the physics of the day before? I asked a Service request with Oracle, and they said that you re-create the database pending is the only way to support the development of the tank set to the standby database. Is this true?
  
  
  Thank you
  Anthony

  You have received good advice from the Support of Oracle, so I recommend doing a complete refresh of Eve, but if you want to play with fire...

  On the elementary level, you can: -.

  target connection.
  RUN {}
  ALLOCATE CHANNEL disk1 DEVICE TYPE DISK FORMAT ' / home/oracle/rman_%d_%T_%s_%p';
  BACKUP CURRENT CONTROLFILE TO SLEEP;
  }

  or

  ALTER DATABASE CREATE STANDBY CONTROLFILE AS ' / home/oracle/standby.ctl';

  Then you stop the watch, replace the with the new primary backup controlfile and make sure that file names are correct (select name from v$ datafile). If the file names are correct, start the recovery. Otherwise, rename files, or difficulty with the rman command 'catalogue start with '.

• Create the logical drive using the disk manager

  I want to create a partition for logical disk on an external hard drive using disk management

  Hello

  Disk management will create primary partitions until you create the 4th one, it is not customizable. If you want more options, you must use the diskpart command line, see: http://technet.microsoft.com/en-us/library/cc766465 (WS.10) .aspx Best of Luck, Rick Rogers, aka "Nutcase" - Microsoft MVP Windows help-www.rickrogers.org-http://mvp.support.microsoft.com

• How Auto start the Physical Standby Database (when restarting the server)

  Dear All (s)
  
  I configure oracle (10.2.0) dataguard on the production database, a time server restart because of disconnectivity to power, I want restard dataguard when rebooting the server. I'm using Server 2003 32-bit. Guide me how I can run after orders when the server restarts.
  
  SQL > connect/as sysdba
  SQL > bootable media.
  SQL > ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;
  
  
  Thanks in advance

  I want to run these command each time when the server is restarted.

  Yes, I did not understand that... but what's the problem? You can't schedule a task when the server starts?

• Logical standby database

  Hello
  
  How to check what mode I m in the logic of the standby database? that is to say waiting or none
  
  Concerning

  Dear user13364785,

  What is the result of the following query?

  SQL> select guard_status from v$database;
  

  Kind regards.

  Ogan