created 10.2.0.1 RAC-ASM-DBCA could not create database
Hello gurus,I use 10.2.0.1 on OEL5. I installed the CRS, Oracle home, ASM on both nodes and everything's fine.
When invoked dbca to create a database, it is said:
*'DBCA could not start the ASM instance is configured on this node. To proceed with the creation of the database using ASM, you need the ASM instance to be operational. You want to re-create the ASM instance on that node? " *
Is this a bug? because some blogs say it is a bug. And patch 8288940 will solve this problem. They also say that this patch is to resolve the incompatibility between the incompatibility of ASM 11 g to 10g. But here I am using all of 10.2.0.1.
Is it still possible to patch or is not relevant?
Please somebody guide me please...
-Vimal.
(1) make sure that your headset have a service for this instance of the ASM (DBCA tries to connect to the ASM instance as any other process)
(2) make sure you have a TNS entry in tnsnames.ora for this instance of the DSO.
These steps are not required but as shown in some of the documentation of metalink Oracle to get rid of the bug.
and refer to these
DBCA couldn't start the ASM Instance configured on this Node (550509.1)
DBCA couldn't start the ASM instance is configured on this node (365428.1)
Tags: Database
Similar Questions
-
ORA-04031 Oracle RAC ASM 11.2.0.3
Hello:
I need your help.
When the automatic increase in memory of comics, more than 8 GB, my BD RAC indicates failure.
Environment:
Oracle RAC 11.2.0.3 with 2 nodes.
O.S.: SunOS 5.11 rac1 11.1 sun4v sparc sun4v
RAM: 32 GB.
Oracle Grid Infrastructure 11.2.0.3
Oracle ASM 11.2.0.3
Oracle Database 11.2.0.3 Enterprise Edition with RAC option.
Symptom:
I created my DB CARS with MEMORY_TARGET = 1 G.
I have been to increase the parameter up to 8 GB without problem, but the 9 GB, this error occurs:
* .memory_max_target = 9g
* .memory_target = 4g
SQL > startup nomount;
ORACLE instance started.
ORA-00604: an error has occurred at the SQL level recursive 2
ORA-04031: unable to allocate 32 bytes of shared memory ('shared
pool"," X$ KSMSD "," KGLS ^ c51f85ea ',' kglHeapInitialize:temp') "
Background:
What are the parameters of the kernel for the oracle account:
Oracle@RAC1:~$ prctl - n Project.Max - shm-memory - i project user.oracle
project: 100: user.oracle
NAME PRIVILEGE VALUE FLAG ACTION BENEFICIARY
Project.Max - shm-memory
the 20,00 GB privilege - deny-
system 16.0EB max deny-
Oracle@RAC1:~$ prctl - n Project.Max - sem - IDS - i project user.oracle
project: 100: user.oracle
NAME PRIVILEGE VALUE FLAG ACTION BENEFICIARY
Project.Max - sem - IDS
privileged 16.0 M - deny -.
system of 16.8 M max deny-
How can I fix?
Thank you
David
Your paging file must be at least as big as your physical ram, or in your case specific at least 9 GB or larger. The value of your swap 32 GB if you plan to use the AMM but I wouldn't use it AMM because Oracle does not support on Solaris. Supported only for the ASM instance and not the databases.
-
How can I add data file to an existing table on Oracle RAC ASM with no OMF? Thank you!
How can I add data file to an existing table on Oracle RAC ASM with no OMF? Thank you!
Hello
So I guess you have some files in ASM, see your first existing file structure
Select file_name
from dba_data_files;
and to add to an existing table, the example below (even if you're better sticking with OMFs!)-is that what you are looking for?
SQL > create tablespace TEST1
2 datafile '+ DATA' size 1 M;
Created tablespace.
SQL > select file_name in dba_data_files;
FILE_NAME
--------------------------------------------------------------------------------
+Data/orcl2/datafile/users.259.859820983
+Data/orcl2/datafile/undotbs1.258.859820983
+Data/orcl2/datafile/SYSAUX.257.859820983
+Data/orcl2/datafile/system.256.859820981
+Data/orcl2/datafile/example.269.859821049
+Data/orcl2/datafile/Test1.271.859843053
6 selected lines.
SQL > alter tablespace TEST1
2 Add datafile ' + DATA / mynewfile01.dbf ' size 2 m;
Tablespace altered.
SQL > select file_name in dba_data_files;
FILE_NAME
--------------------------------------------------------------------------------
+Data/orcl2/datafile/users.259.859820983
+Data/orcl2/datafile/undotbs1.258.859820983
+Data/orcl2/datafile/SYSAUX.257.859820983
+Data/orcl2/datafile/system.256.859820981
+Data/orcl2/datafile/example.269.859821049
+Data/orcl2/datafile/Test1.271.859843053
+ DATA / mynewfile01.dbf
Thank you
-
12.1.3 database of single node 11.2.0.3 to node 2 RAC ASM EBS
Hello
We intend to convert database of system 11.2.0.3 of ordinary/local file of the single node to node 2 RAC ASM.
Please help me in the creation of the roadmap for the same thing.
for example
1. create a raw file-sharing system
2. create for ASM diskgroup
3 convert the local file system to the first ASM
etc, etc.
It's the first big task so need to expert advice.
Please refer to:
The use of Oracle 11 g Release 2 Real Application Clusters with Oracle E-Business Suite Release 12 (Doc ID 823587.1)
Oracle E - Business Suite Release 12 high availability Documentation Roadmap (Doc ID 1072636.1)
Thank you
Hussein
-
I installed Oracle RAC (asm) on Red Hat Linux 4 and 5 without problems by using NFS and creating shared files and presented them to the DSO as devices without any problem.
Now I meet with Oracle 11 g 2 ASM installation on Red Hat Linux 6.1 and the installation documentation is inaccuracies on how I can use shared NFS this empty asm files so that I can properly install the DSO. I understand that Oracle does not provide ASMLib for raw devices for Red Hat linux 6 going forward.
I understand that asmlib must not be supported on Red Hat Linux 6 forward however I would appreciate information in support of the DSO on Red Hat Linux 6 using NFS share and create empty files with jj. This worked on Linux 5 and I'll try to find a solution.
/ sbin/scsi_id is used so that I understand. EXM/sbin/scsi_id-g u d < device empty file or dd >
Trust setting of SCSI devices by adding the entry of /etc/scsi_id.config
Rules UDEV advice would be appreciated.
Since I use empty files to the server for ASM, using partprobe < path of the empty file? >?
Thank youHello
If it comes to cluvfy in the program installation you indicating that your devices are not shared, contempt which (if you personally know that they are shared).
This seems to be an annoying error with cluvfy, the shared disk check only works in specific circumstances...To be honest, I never saw him work properly, so I'm testing the devices 'sharedness' always myself (dd in on a node, dd on the other to see the results expected).
If the error happens however at a date later (root.sh), then the devices are really not shared, or you have a permissions problem.
Concerning
Sebastian
-
Need advice from configuration to the flash cache multi-node RAC/ASM
We have a database of CARS to work two nodes. We install a new fusion 640 GB flash card in each node. The is a double card, so that it shows up as two devices: / dev/fioa and/dev/fiob on each node.
We have created two groups of private drives, one on each node. The Group of disks on node 1 is '+ FLASHCACHE' and the disk on node 2 group is "+ FLASHCACHE2".
We have not found specific examples of how to configure the parameters of the init for flashcache on RAC/ASM. We guess that we must do the following. If anyone would be critical and confirm or suggest something different, we would appreciate it very much!
"prod1.db_flash_cache_file ='+ FLASHCACHE/flash1"
prod2.dg_flash_cache_file = '+ FLASHCACHE2/flash2'
* .db_flash_cache_size = 600G
Thanks for any advice.
Jim
Published by: jimbev90 on January 5, 2012 08:18Hi Jim,.
prod1.db_flash_cache_file='+FLASHCACHE/flash1' prod2.dg_flash_cache_file='+FLASHCACHE2/flash2' *.db_flash_cache_size=600G
Your configuration is correct.
Smart Flash Cache database is not shared across RAC nodes. It is private to each RAC instance. For this reason, each RAC instance must define its own local cache of flash file path. When the flash cache is managed by ASM, a separate diskgroup is necessary for each instance flash cache.
You can use ALTER SYSTEM for db_flash_cache_size set to zero to disable the flash cache. Alternatively, you can use ALTER SYSTEM to deliver the flash cache to its original size to reactivate it.
Read this white paper Oracle database Smart Cache Flash
http://www.Oracle.com/technetwork/articles/systems-hardware-architecture/Oracle-DB-smart-Flash-cache-175588.PDFKind regards
Levi Pereira -
Oracle 10g RAC + ASM + Data Guard: Question on the new disk group.
Hello
One of our clients is to have Oracle 10 g RAC + ASM + Data Guard. Database is the disk DATA_DG1 group and FRA is on FLASH_DG1. Data Guard is a single instance on ASM.
To add more space, we can create another disc of the Group DATA_DG2 on Prod ASM and Data Guard ASM env, replication continues without any problem. Will be archiving logs shipped to the second disk DATA_DG2 group and applied without any configuration changes?
Rgds,Yes, it sounds great.
You should be fine with the implementation of these measures and the dataguard should continue on as usual.
Just make sure that you are dealing with a physical standby that has not the conerts file name defined.
-
Installation step by step 12.2 RAC ASM on Oracle Enterprise Linux5 64-bit EBS
Hi all
Hope you are all very well...
Could you please help me because I am looking for a document (installation step by step 12.2 RAC ASM on Oracle Enterprise Linux5 64-bit EBS)... as I already searched and found a lot of documents, but all are more detailed, and others are for the installation of single node...
What I need is to set up 12.2 RAC ASM environment on two 2 knots... So, could you please help me.
Your support will be much appreciated...
Kind regards
Mohammed
Hi Mohammed,.
1. Yes, you could. You can also see "Section 3: install the software from the Oracle 11 g 2 Cluster" (Doc ID 1453213.1)
2 oracle eBusiness Suite Installation and upgrade to version 12 (12.2) Notes for Linux x 86-64 (Doc ID 1330701.1)
For the installation of CRS, please visit http://www.oracle.com/pls/db112/portal.portal_db?selected=16&frame=#oracle_clusterware
Thank you
Hussein
-
Hello
I wonder is it possible run EBS 11i database of ASM with environment Non-rac.
Thank you.
Published by: ecer on July 28, 2012 09:30Salvation;
I wonder is it possible run EBS 11i database of ASM with environment Non-rac.
Why not :) What is the version of db? You can also use ASM on stand-alone server. For details pelase see what Hussein posted snoussi.
PS: Please don't forget to change the status thread answer whether it is possible when believe you your thread replied, he pretend to wasting time in other forums users while they are looking outstanding which is not answered, thank you for understanding
Respect of
HELIOS -
Closing in 11.2 RAC ASM instance
DB version: 11.2.0.2
Platform: Solaris 10 / AIX 6.1
2-node RAC
As OCR and voting disks are stored in ASM starts (11.2), is it OK for instance ASM stop in one or both of the nodes? That is to say.
SIR of a node will drop if you shutdown ASM instance in this node?Greeny wrote:
DB version: 11.2.0.2
Platform: Solaris 10 / AIX 6.12-node RAC
As OCR and voting disks are stored in ASM starts (11.2), is it OK for instance ASM stop in one or both of the nodes? That is to say.
SIR of a node will drop if you shutdown ASM instance in this node?Yes. You will need to first stop the battery Oracle Clusterware on the node on which you must stop the Oracle ASM instance.
Use "crsctl stop cluster node_name - n" or "crsctl stop crs" for this purpose.Since you are using OCR and VOTING DISK on ASM, it is not possible only stop ASM and keep cluster running.
Kind regards
Levi Pereira -
11.2.0.3 Pri RAC ASM with failover standby Post normal FileSys Active
The architecture consists of two node rac asm primary and a normal file system active standby on Oracle 11 g 2 11.2.0.3. With the Basic Configuration of broker.
Made a move to the managed broker and not the file system Normal has the main role and the eve consists of two node rac asm. I want to switchback, i.e., former principal-> former role primary and Standby-> role of Eve.
However, my broker contains the following:
DGMGRL > show configuration detailed;
Configuration - DG_PRI_CFG
Protection mode: MaxPerformance
Databases:
EVE - primary database
WARNING: ORA-16829: accelerated failover configuration is trolling
KEMETRAC - (*) Physical standby database
Error: ORA-16810: multiple errors or warnings found for the database
(*) Fast failover target
Properties:
FastStartFailoverThreshold = "95"
OperationTimeout = "30"
FastStartFailoverLagLimit = "95"
CommunicationTimeout = "180"
FastStartFailoverAutoReinstate = 'TRUE '.
FastStartFailoverPmyShutdown = 'TRUE '.
BystandersFollowRoleChange = "ALL".
Fast-Start Failover: ENABLED
Threshold: 95 seconds
Target: KEMETRAC
Observer: emcc.respecti.com
Offset limit: 95 seconds
Primary closure: TRUE
Auto-Rétablir: TRUE
The configuration status:
ERROR
I found a recommendation to increase the value of FastStartFailoverThreshold = '90';
Although I still meet the above configuration error.
Recommendations are appreciated!
Published by: 783527 on March 12, 2012 19:41Hello
According to the guidelines of your output, you can see log files waiting for new primary forward, but you haven't posted from sleep mode if you have set up the standby redo log files or not?
This problem occurs only if there is an incorrect configuration , reconfigure then again by abandonment & recreating.Sleep mode: -.
SQL > select group #, sequence #, bytes/1024/1024, used condition, stored in v$ standby_log;
SQL > select group #, thread #, sequence #, bytes/1024/1024, archived, the journal of v status $;Check out these links
http://docs.Oracle.com/CD/E11882_01/server.112/e17022/log_transport.htm#BABCBEGJ
http://www.Pythian.com/news/581/Oracle-standby-redo-logs/ -
Hello guys,.
IM new RAC environment and never worked on it. Please guide me how to do a Checkup on node 2 RAC/ASM and RAC/ASM 5 knots. Also, please help me to define what exactly does a health check. The version of the database on the cars are 10g and 11g.Please post this question on the right forum, General database Discussions.
-
Oracle RAC ASM issues SQLLoader
One of our clients wants to use Oracle RAC ASM for our application, I just want to know if there will be transactions of validation in two phases and SQL * Loader broadcasts in ASM.
Oracle 10 g database isASM works only at the level of the storage layer and has nothing to do with:
-the distributed transactions
-executable client that connects to the database instance: SQL * Loader, SQL * Plus, etc.RAC has also nothing to do with distributed transactions: a RAC database is a single database with multiple instances, but always a single database; There is no need to use distributed transactions because you have a RAC database.
Edited by: P. Forstmann on 24 Feb. 2011 13:27
Edited by: P. Forstmann on 24 Feb. 2011 13:31
-
DBCA shows not all asmlib disks
Dear all,
I am facing problem creating disc ASM using ASMLib. This isn't discover ASM disk via dbca. According to oracle, he was to discover using the ASM disc ' ORCL: *' diskstrings. But in my case it is not discovered disc. But I am able to create using the ASM disk ' / dev/oracleasm/disc / *' diskstrings. We use emcpower path for storage. I also mentioned Metalink ID 738480.1 but no luck so far.
Here are the details.
O / S: OEL 5.2
#uname - r
2.6.18 - 92.EL5
ASMLib rpm:
# rpm - qa | grep oracleasm
oracleasmlib - 2.0.4 - 1.el5
oracleasm - 2.6.18 - 92.el5xen - 2.0.4 - 1.el5
oracleasm - 2.6.18 - 92.el5 - 2.0.4 - 1.el5
oracleasm-support - 2.1.7 - 1.el5
oracleasm - 2.6.18 - 92.el5debug - 2.0.4 - 1.el5
# /etc/init.d/oracleasm listdisks
DG_CRM_ARCH1
DG_CRM_ARCH2
DG_CRM_ARCH3
DG_CRM_ARCH4
DG_CRM_DATA1
DG_CRM_DATA2
DG_CRM_DATA3
DG_CRM_DATA4
DG_CRM_DATA5
DG_CRM_REDO1
DG_CRM_REDO2
DG_CRM_REDO3
DG_CRM_REDO4
# oracleasm - discover
ASMLib /opt/oracle/extapi/64/asm/orcl/1/libasm.so using
[Library ASM - Generic Linux, version 2.0.4 (KABI_V2)]
Disk discovery: ORCL:DG_CRM_ARCH1 [134206947 blocks (68713956864 bytes), maxio 512]
Disk discovery: ORCL:DG_CRM_ARCH2 [134206947 blocks (68713956864 bytes), maxio 512]
Disk discovery: ORCL:DG_CRM_ARCH3 [134206947 blocks (68713956864 bytes), maxio 512]
Disk discovery: ORCL:DG_CRM_ARCH4 [134206947 blocks (68713956864 bytes), maxio 512]
Disk discovery: ORCL:DG_CRM_DATA1 [419424957 blocks (214745577984 bytes), maxio 512]
Disk discovery: ORCL:DG_CRM_DATA2 [419424957 blocks (214745577984 bytes), maxio 512]
Disk discovery: ORCL:DG_CRM_DATA3 [419424957 blocks (214745577984 bytes), maxio 512]
Disk discovery: ORCL:DG_CRM_DATA4 [419424957 blocks (214745577984 bytes), maxio 512]
Disk discovery: ORCL:DG_CRM_DATA5 [419424957 blocks (214745577984 bytes), maxio 512]
Disk discovery: ORCL:DG_CRM_REDO1 [50331616 blocks (25769787392 bytes), maxio 512]
Disk discovery: ORCL:DG_CRM_REDO2 [50331616 blocks (25769787392 bytes), maxio 512]
Disk discovery: ORCL:DG_CRM_REDO3 [50331616 blocks (25769787392 bytes), maxio 512]
Disk discovery: ORCL:DG_CRM_REDO4 [50331616 blocks (25769787392 bytes), maxio 512]
#cat/etc/sysconfig/oracleasm
#
# This is a configuration file for the automatic loading of the Oracle
# Automatic storage management library kernel driver. It is generated
# By running configure /etc/init.d/oracleasm. Please use this method
# to modify this file
#
# ORACLEASM_ENABELED: means 'true' to load the driver at startup.
ORACLEASM_ENABLED = true
# ORACLEASM_UID: default user have the point of mounting/dev/oracleasm.
ORACLEASM_UID = oracle
# ORACLEASM_GID: default group have the point of mounting/dev/oracleasm.
ORACLEASM_GID = oinstall
# ORACLEASM_SCANBOOT: 'true' means search the ASM disks at startup.
ORACLEASM_SCANBOOT = true
# ORACLEASM_SCANORDER: correspondence of command disk scanning patterns
ORACLEASM_SCANORDER = "emcpower.
# ORACLEASM_SCANEXCLUDE: matching patterns to exclude scan disks
ORACLEASM_SCANEXCLUDE = "sd".
-----------------------------------------------------------------------------------------------------
Kind regards
Jaz
Published by: Jaz_Comp on December 26, 2011 15:30Salvation;
"" For your question, I suggest farm your thread here that change the status of the thread to answered and move it to Forum home ' Grid Computing ' RAC, ASM & Clusterware Installation you can get a faster response
Respect of
HELIOS -
GLWB-10521: could not resolve the ASM label
Hello
I try to install Oracle Grid Infrastructure 12 c Release 1 on Windows Server R2 2012 in a hyper-v Lab (to my intention is to install a complete rac - later). I created my ASM storage with the role of ISCSI target (4 discs 20 GB each, all the dynamic extension), and they are all visible from both nodes. I can ping all the IP addresses of all servers involved. I required prior tasks, and there is one thing that I am invited to check. Error message is:
«Device checks for ASM - there is a control to check the devices specified in the requirements for the ASM.» Error:
-
GLWB-10521: could not resolve disc ASM 'ORCLDISKDATA0' label to the path of unity on the node 'ORAN01DV' - Cause: could not resolve the ASM label to any device on the specified node. -Action: Make sure the specified label of ASM is properly engraved on a device shared on the specified node and marked devices are accessible to the current user. To check the address record label use tools "Asmtoolg" on Windows operating system platforms and "oracleasm" on the Linux operating system platform.
-
GLWB-10521: could not resolve disc ASM 'ORCLDISKDATA1' label to the path of unity on the node 'ORAN01DV' - Cause: could not resolve the ASM label to any device on the specified node. -Action: Make sure the specified label of ASM is properly engraved on a device shared on the specified node and marked devices are accessible to the current user. To check the address record label use tools "Asmtoolg" on Windows operating system platforms and "oracleasm" on the Linux operating system platform.
-
GLWB-10521: could not resolve disc ASM 'ORCLDISKDATA2' label to the path of unity on the node 'ORAN01DV' - Cause: could not resolve the ASM label to any device on the specified node. -Action: Make sure the specified label of ASM is properly engraved on a device shared on the specified node and marked devices are accessible to the current user. To check the address record label use tools "Asmtoolg" on Windows operating system platforms and "oracleasm" on the Linux operating system platform.
-
GLWB-10521: could not resolve disc ASM 'ORCLDISKDATA3' label to the path of unity on the node 'ORAN01DV' - Cause: could not resolve the ASM label to any device on the specified node. -Action: Make sure the specified label of ASM is properly engraved on a device shared on the specified node and marked devices are accessible to the current user. To check the address record label use tools "Asmtoolg" on Windows operating system platforms and "oracleasm" on the Linux operating system platform. »
I opened Asmtoolg, and everything seems to be ok in there (all discs are stamped and are visible etc.). I recognize that this is a complex area, so I understand that it will be difficult to difficult to diagnose. I was really surprised to not find anywhere, any success on the internet for the GLWB-10521 error code well. Does anyone have ideas of things I could try?
Thanks in advance
There is a bug (Bug 20428707 : GLWB - 10521 RAC INSTALLATION)
Maybe you are looking for
-
Everything was fine until that firefox automatically installed the latest version and it was not compatible with my version of mac. Normally it simply restores the version I was using but this time the old version download disappeared from my office
-
Primitive polynomial (generate some Bits VI)
In the attached VI, I'm actually generate bits using the PN sequence and primitive polynomial. I'm having a problem in the primitive polynomial. If I have a primitive polynomial (x ^ 4 + x + 1) can any body guide me how to make it work? I tried diffe
-
How to measure the frequency of a clock using meter in LabVIEW?
Hi guys,. Someone knows how to measure the frequency of a signal introduced in LabVIEW (in the FPGA PXI-7813R), using a counter in LabVIEW? Essentially, I want to use this counter as a kind of Logic Analyzer. Thank you, Anoop
-
I have two children that I manage accounts on 4 different computers: 2 desktops and 2 laptops. We live in one time zone but periodically they take their portable several time zones away to visit their grandparents. While they are gone, I want to ma
-
Original title: deleted Ethernet adapter Hello All trying to fix my computer run Registry cleaners, I managed to delete my Ethernet adapter, I have taken steps to try to fix this problem and have been advice to visit Microsoft support for help. I hav