Creating a DVD containing all Vista updates

Similar Questions

• How to create a recovery disc with all vista updates?

  original title: how to create a recovery disc with all vista updates without starting from scratch, so I can replace my hard drive?

  My hard drive seems to be dying.  I would replace the drive.  I reloaded vista from scratch with all the updates, but it took forever.  I would like to make a record of recovery with all updates.  IAM on vista Home premium.  32 bit

  If you want a good backup program that backups image, I recommend Acronis True Image 2010:http://www.acronis.com/homecomputing/products/trueimage/.  It offers a free trial, so you can test and if you want it's only about $30 for the original version.  A lot of people I know this program and use it instead of Vista even in versions of Vista that offers imagery as this program does a better job.  Of course you also need a place to put the backup (which will take a lot of space), so also consider.  The best choice would be a USB external hard drive at least as large as the readers you want to back up (not only the data on them, but the entire available disk space, so you miss when you add more information about the disks).

  You cannot use IMGBURN do - it can't do anything like that.  It must be the imagery of backup software.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The last update for yosemite contains all previous updates?

  Hello

  I just got a MacBook A1181 and as a new Mac user, I have a few questions.

  (1) he has Yosemite OS - X and if I download and install the latest update has all previous updates? or do I have to download and install each update in turn?

  (2) I have the installation on a USB bootable media. Can I save this by creating a backup of DVD Bootable Disk?, and if so, how do I do it? and can I just copy the content of the Flash drives on another Flash drive as another backup.

  Thank you very much in advance for any response.

  Kind regards

  Mike

  The latest version of Yosemite was 10.10.5. If you download the installer of your purchases tab, it will be a full installer for 10.10.5.

  If you have an earlier version of Yosemite, use the software update feature, or download the installer to update drop-down list in the support area of the Apple web site. Drop means that it includes all interim updates.

  If you try to get El Capitan, this isn't an update it's an upgrade. You download the program installer using the app from the App Store. The current version will install 10.11.3, the latest version.

• Media Player will read is more than Cd or DVD after a Vista update

  I've recently updated the following text on my computer "Windows Vista for systems x 64 (KB968389) and Windows Vista Service Pack 2 for x 64-based systems (KB948465)"; now my Media player will read the CD or DVD.   The media player will play already exsisting file. However, it did not open to place the CD or DVD in the drive.

  Any help on this would be greatly appreciated.

  Thank you John for answer... Unfortunately, there is no change at this time.   Could it be possible that by updating Vista with these comply with the provisions mentioned is, updates, it could have damaged my driver?   I remember as the update has been filling that I was informed that it can cause some drivers to malfunction.   Any thoughts?

  Thank you.

  =================================
  The following article might be worth a visit:

  (314060) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060/en-us

  John Inzer - MS - MVP - digital media experience

• Creating Windows DVD on a Vista Business operating system?

  Is it possible to install Windows DVD Maker on a Vista Business operating system?  If Yes, where can I download Windows DVD Maker?

  Is it possible to install Windows DVD Maker on a Vista Business operating system?  If Yes, where can I download Windows DVD Maker?

  =======================================
  Windows DVD Maker is included in Vista Home Premium
  and ultimate... it is not available for download.

  If you want to create a video DVD, you need 3rd party DVD
  Creation software.

  The following preferential ticket may be worth a try:

  DVD Flick
  http://www.dvdflick.NET

  If you want to create a data DVD, you can try using Windows
  Media Player:

  Windows Vista-
  Burn a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• My DVD containing all my music has become corrupted and inaccessible, I can save?

  It was about half full, I transferred (or attempted) of my hard drive.  When I then tried to use the DVD, again showed as being only half full, but is not available to show what is on it, or to play music.

  Hi Anne,.

  Thanks for posting your query in Microsoft Community Forum!

  According to the description of the problem, it seems that music on DVD damaged and inaccessible.

  To guide you in the right direction, I need a little more information of the computer with the problem. Please help me answer the following questions:

  1. what version of Windows is installed on the computer?

  2. what happens when you try to access the music?

  3. do you get an error message?

  4 have you checked the DVD in another computer?

  5 have have there been recent changes made on the computer before the show?

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Will be created after 2 years contain all updates of operating system recovery disks?

  I have vista premium ServicePack one, it crashed on the weekend, so I installed two years ago, when the laptop was brand new on the recovery disks. Then I did a few days of nearly a hundred download updates; I don't want to do that again. So, is it possible to burn new disks of recovery that will contain all the updates installed more than two years?

  Thank you, Rob

  Western Australia

  It depends on what computer you have. Some manufacturers allow the recovery discs once create or create from the copy of Windows on the recovery partition. Others include software to do a full system backup at any time.

  Windows Home Premium does not include Betacam to make a complete PC Backup. If you want to do this you will need a third-party backup program.

• Are the latest updates including all previous updates?

  Our workstations are not connected to public networks for security reasons, it is necessary to rely on programs update downloaded software, such as the Application Manager cannot connect to the Internet.

  By reviewing downloadable updates, I note that there are several versions for single CS6. It is necessary to download all versions and update one at a time in sequential order, or download the latest version contains all previous updates?

  Hi Mark,

  No need to download in sequential order. Apply the latest patch contains all previous updates.

  Best,

  Peter Garaway

  Adobe

  Premiere Pro

• How can I get the best quality when creating a DVD

  Hey everybody

  I really hope you can help because I'm more frustrated. That is the problem.

  Each month, we create a DVD with all the latest trailers on them playing in video stores.

  
  Here are the steps that we take

  1. download the trailer for quicktime 720 p on the web

  2. We then change the first Pro CC
  3. we add a graphic overlay (its a 1280 X 720, 72 dpi TIFF) I use the CC Photoshop preset for it
  4 export the project to the h.264 (.mp4) format (flow target 7.5, 7.5 maximum Bitrate, quality use Mailhot invalidate) it comes out beautiful in HD 720 p.

  Then we open again CS6

  1. start a new chronology

  2 import our .mp4 file
  3. define our transcoding. Now, here's the problem, I tried each preset. With custtominzing, our most recent has been...

  
  Then go us to the author of it. But when its done, it is so blurry you can't read text on the screen. Now, I know that DVD IS NOT HD, I get it, but it must always be readable? That's the best I can get? Here are a few screenshots (sorry I had to take with my camera to the DVD and you can see how blurry.)

  

  

  Any help would be appreciated as our client is really getting annoyed with the quality. Society before us used Premier Pro and still but it came out in a most pleasant way. Im just lost here.

  Export first as MPEG2-DVD. Or something without loss to export even if you have only a compression.

• InterVideo DVD Creater 2 cannot find DVD/CD in Vista

  When I try to "Create a film" I can't "ungrey' the box 'Select device' - which should be the DVD/CD device using this old DVD creator. I want to create a DVD. Open the computer, I can 'see' the recorder of DVD/CDROM and it seems to work properly, otherwise.

  I played with the tools of the creator, Options, and then on the 'Direct record' tab, I get the following Vista Home Premium error message: "Application error: failed to initialize the ASPI (17236) Manager.

  Any ideas of what I could do to fix this?

  If this problem is in other Forums, sorry about that. I'm new :>)

  Thank you, Len

  Hello

  It's Windows 7 Forum and you should be in the Vista Forums.

  Answers - Vista Forums
  http://social.answers.Microsoft.com/forums/en-us/category/windowsvista

  ==========================================================

  That would be my answer in the Forums of Vista as well.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows Vista updates (12 April 2010) broke all the desktop shortcuts

  On 13 April, I fist notice this problem. I managed to it is resolved according to restore my computer to a previous point prior to the windows vista update have been installed. I didn't create a new restore point and also forgot to uncheck "automatic installation of windows. A few days later, the same problem after updates have been installed again on April 15. Unfortunately, this time I don't have a restore point previous April 15. So, I restored it on next day 16, but not resolved the issue. So I uninstall all vista windows update installed on April 15 but did not help either.

  Fortunately it affects only an admin user (user account that run windows update) all users are very well.

  Any suggestions to solve this problem, much appreciated.

  Kind regards

  lmaestro

  SOLVED. It is a Virus. A villain. For more information, see URL below:

  http://social.answers.Microsoft.com/forums/en/vistaprograms/thread/039ceca1-c81f-4136-8c04-bf13c0378495

  I followed the comments posted by "lilvtboiraver" about the "Regetry Exchange" and it solved this problem.

  Thank you

• Impossible to install my dvd containing the update of wordperfect files

  The dvd contains files converted wordperfect X 5 but does not contain a Setup program or any program exe and microsoft will not accept. All the answers?

  You need a program that can read or modify files WordPerfect.  The files themselves will do you any good without a program that can open or edit them, and there are none that comes with Windows that can open or edit them.

• I can download all windows updates, but my system will not configure and install them. I have Vista, what happens?

  nfkgjaLRjh:KF'e; ktg; B; love my lifeE

  Hello

  Do you get any error messages? More detail of what is happening and noted that allows us to help you.

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:
  
  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Vista: All Windows updates suspended / "Module of Windows Installer has stopped working and Will Close."

  On my installation of Vista, all windows updates no longer work.  If I try and run them from Windows Update in Control Panel one starts to run but then it just hangs.  At the same time, I get a message "Windows install Module has stopped working and closes".  If you look in the services, it is crushed, but restarts.  The update remains always hung.  It doesn't matter what update I try and run, I always get the same result.

  When the computer is shut down, it also tries to automatically install updates.  These also hang on the first, which means that I have to force power off the computer.

  Don't know if this is related, but I don't think that SP2 already installed - it kept if crush (don't remember what was the error message).  When I restart in safe mode it tells me that I'm still on SP1.  I followed all the suggestions on how to get SP2 installed for the error I received, but nothing has worked.

  Do not really understand what I have really installed a lot of "_" on the PC, it is a "clean" installation (about 1 year now).

  Any ideas?  Really, I don't want to have to do a re-install, but I suspect that is where I'm heading unfortunately.

  Hi AndrewInNZ,

  Thanks for visiting the site of the community of Microsoft Windows!
   
  I would like to ask you some questions for a better understanding of the issue:
   
  (a) did you try to temporarily disable the security software and check if updates are smooth?
   
  (b) you are using a firewall in addition in instead of the windows firewall? If so disable (temporarily) of the third party firewall and look for updates.
  It is usually caused by a 3rd party firewall that it blocks the internal ports.
   
  Check out WERCON for more information-
   
  1) Click START | wercon.exe type in the search box start and click on enter.
   
  (2) select "View problem history", under 'Windows identified problems' with the right button on a problem, and then select "view problem details. Click "Copy to Clipboard" export to text document
   
  Also reset the Firewall setting:
   
  1) Click START | type FirewallSettings.exe into the start search box | Click on FirewallSettings.exe above | Select the Advanced Settings tab. Click 'Restore Defaults ' | Click on apply (if Hi-lighted) | Click OK

  Check the status of the service as well:

  Log in as administrator-

  Start button | Control Panel | System and Maintenance | Administration tools

  Double-click on Services

  (Provide the administrator password or a confirmation if prompted to do so.)

  Right click on the 'Windows Modules Installer' service, and then select Properties.

  Select the general tab - make sure that the startup type is manual

  Here is the link to solve problems connecting to Windows Update or Microsoft Update
  : http://support.microsoft.com/kb/818018/en-us

  If you want to check the version of the service pack of the operating system:
   
  Right-click on computer and select Properties.

  Hope this information helped!

  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• How do I determine that my copy of windows contains all the latest updates, service packs, patches, etc?

  How do I determine that my copy of windows contains all the latest updates, service packs, patches, etc?

  In addition to the updates of Windows, there are some tools to run that will give you all kinds of information on your PC:

  Microsoft Baseline Security Analyzer

  Belarc