Creating a sequence in oracle 11 g 2 issue

Similar Questions

• How to create a sequence in oracle forms6i

  Oracle forms 6i
  
  
  Hai All
  
  I work in a leave request entry, so I need to create a sequence to give a unique number for each entry
  
  Pls tell me the steps how to create and how to call the sequence of database
  
  
  Thanks in advance
  
  Srikkanth.m

  Hello
  Sequence, you can create in the database and you can use this sequence generation sequence number forms
  Creation, see link below...
  http://www.techonthenet.com/Oracle/sequences.php
  http://psoug.org/reference/sequences.html

  To generate numbers forms use like that...

  For each entry at the time of save you can use on PRE-INSERT of block level
  SELECT SEQUENCE_NAME.NEXTVAL
  INTO :FORM_FIELD_NAME
  FROM DUAL;
  

  -Clément

• How to create a generic method to programmatically access the DB sequence in oracle adf

  Hello

  I am trying to create a generic method to access a programmaticall DB Sequence in oracle adf. My version of JDeveloper is 11.1.2.4.

  I created a method getSequenceNumber (String seq) and saved in my application module. Also added to the links of my page.

  I followed the instructions below link for this.

  ADF Code corner: Oracle OTN JDeveloper harvest xx / 2010

  Note: The problem with this approach is that I have to create separate methods to access the different sequence numbers.

  In my managed bean, I wrote the code below to get the method name.

  OperationBinding getNextSequence = ADFUtils.findOperation ("getSequenceNumber");

  How can I pass my sequence DB name to this method?

  Thank you

  Hello

  getNextSequence.getParameterMap.put ("seq", "yuorseqname");

  getNextSequence.execute ();

• I am trying to create a sequence to be used as a primary key in an Oracle table

  Hi guys
  
  I ODI version 10.3.5 and I'm trying to create a sequence that fills with row_id for a table. The schema is a database.
  And I want that this element will be the primary key of the table that is responsible to run the interface but I get questions.
  
  So please advise me.

  Hello

  Can you please provide the following details:
  1. What is the area of the execution of your sequence? Is it source, scene or target.
  2. what IKM you use (hopefully, you run the sequence in the staging or the target)?

  My understanding is when you check in not Null, all your lines going to the error table. So it gives no error.

  When you uncheck the not Null, it is in error because the database does not Null values in the primary key column.

  You can do the following to check if your sequence is working properly.
  Try to write an Insert Select query to DB and run it and see if it works properly.

  i.e.

  Insert (EMPL)
  EMPNO,
  ENAME,
  EMPLOYMENT,
  BISHOP.
  HIREDATE,
  SAL,
  COMM,
  DEPTNO
       
  )
  Select S_EMPNO. NEXTVAL,
  ENAME,
  EMPLOYMENT,
  BISHOP.
  HIREDATE,
  SAL,
  COMM,
  DEPTNO
       
  from EMP

  or if you can provide your query in this format, it will help find the question quickly. Please also indicate the KM.

• Premiere Pro 2015.4 crashes each time I have create a sequence

  Whenever I create a sequence I get the popup message:

  "Premiere Pro has encountered an error.

  [/ GoodBuddy/releases/2016.03/PremierePro/HSL/Src/SequencePlayer.cpp-522] »

  Then a popup saying first encountered a serious error and must be closed. Whatever the sequence settings, I changed resolution, codec, etc. and same message every time. My current solution is to import an old project and delete everything else that a sequence and then delete everything out of sequence and change the settings for what I need them to be. It's a pain. I'll file a bug report

  Adobe first Pro CC 2015.4 version 10.4.0 (30) Build

  Mac Pro garbage (end 2013)

  10.10.5 OSX

  3.5 GHz 6-Core Intel Xeon E5

  32 GB 1866 MHz DDR3 ECC

  Dual AMD over-pants D500 3072

  500 GB Apple SSD

  I had a similar problem, also run MacOS (10.11.6) I think I've isolated my problem being related to OpenCL.

  Try this: create a new project, on the "rendered" options and change of OpenCL 'Metal' or 'Software Only' and see if you can create a sequence then.

  (Or you should be able to change this to an existing project by going to file > Project Settings > general...)

  Regarding how to fix the issue OpenCL itself... well beyond my pay grade sorry!

• How to create packages DBMS_XPLAN in oracle 9i?

  Dear

  How to create packages DBMS_XPLAN in oracle 9i? I Googled it already but I could not the solution.

  DBMS_XPLAN is part of the database. The only way to get it in 9i, AFAIK, is upgraded to a later version

• I want to create new sequence from a clip using script.

  I want to create new sequence from a clip using script.

  You can pop the dialog box new sequence (which requires interaction from the user to confirm the name of sequence), or create a new sequence from a .sqpreset file (and specify the name); There is no API around the feature 'make a sequence corresponding to this project item', available in the project Panel.

• Ability to create several sequences of selected clips?

  So, I have been on a warpath for a while now, but haven't found the appropriate answers. So I'll ask.

  I would like to create multiple sequences of any number of selected items. I know that I can drag and drop each clip on the new icon of the sequence, but if I have 100 +, this is getting ridiculous. Is there a script that can do this, or someone can point me in the right direction to embark on such a thing?

  There is no concept of 'selection', in PPro APIs.

  You can create a preset (file .sqpreset) sequences, and there are ways to add a projectItem given to an existing sequence...

  If you can provide more details on the workflow you want to support [write me directly; b b b from adobe dot com], we can better frame.

• Video Audio of Lag/bad on any medium, other than that with which I created my sequence with.

  Title says it all ^ ^

  To develop, if for example, I create a sequence of a video clip, the clip will be fine, however when I try to add a separate audio track for the sequence, the audio is of very poor quality.

  However, if I start by doing a sequence of audio, the audio is fine, but when I add the video track of the sequence, it is extremely laggy/choppy.

  I'm on Windows 10 so don't know if this has something to do with it?

  My computer specs are more good enough for the program as well.

  All comments would be appreciated.

  Hi Ben,

  Try the following steps:

  Put the graphic cards on the basis of Windows display drivers, then check.

  Go to Device Manager.

  Right click to update the driver manually.

  Once done modify the screen resolution and try to launch and control the playback

  Make sure you only select drivers for base maps.

  How to: install and update the drivers in Windows 10 - Microsoft Community

  Vinay

• Assign a value of "dynamically created the sequence" to a variable

  in my procedure I am creating a sequence on the fly, I prepare the name with some parameters passes as below
  
  .
  .
  v_seq_name: = "seq_". loadid | v_table_name;
  run immediately 'CREATE SEQUENCE'. v_seq_name | "MINVALUE 1 MAXVALUE 999999999999999999999999999 START WITH 1 increment of 1 hiding 20';
  .
  .
  
  and now after doing some operations I need to assign the current value of the sequence to a variable number, I tried but does not subsequently
  
  (1) v_curr_value: = v_seq_name.currval;
  (2) select v_seq_name |'. nextval' in double v_curr_value;
  
  can you please suggest me how can I get the value in plsql block.

  And what is - this?

  v_curr_value: = v_seq_name.currval;

  Of course, it will fail. If you want to get currval in a sequence whose name is stored in a variable, you must use dynamic SQL:

  SQL> declare
    2      v_seq_name varchar2(30);
    3      loadid number := 1;
    4      v_table_name varchar2(10) := 'tbl';
    5      v_curr_value number;
    6  begin
    7      v_seq_name := 'seq_' || loadid || v_table_name;
    8      execute immediate 'CREATE SEQUENCE ' || v_seq_name ||
    9                        ' MINVALUE 1 MAXVALUE 999999999999999999999999999 START WITH 1 increment
  by 1 cache 20';
   10      for i in 1..5 loop
   11        execute immediate 'select ' || v_seq_name || '.nextval from dual'into v_curr_value;
   12        dbms_output.put_line(v_curr_value);
   13      end loop;
   14  end;
   15  /
  1
  2
  3
  4
  5
  
  PL/SQL procedure successfully completed.
  
  SQL> 
  

  SY.

• Dynamic, create the sequence then select nextval within a transaction

  The following procedure does not compile if the sequence SEQ_ADR does not exist before compilation. I had to manually create the sequence before you can compile this procedure. How can I avoid this manual generation?

  PROCEDURE A_270(proc_id number) IS
  seq_cnt number;
  curr_max number;
  BEGIN
  select count(*) into seq_cnt from user_sequences where sequence_name='SEQ_ADR';
  if seq_cnt > 0 then
  execute immediate 'drop sequence SEQ_ADR';
  end if;
  select max(id)+1 into curr_max from adress;
  execute immediate 'create sequence SEQ_ADR start with '||curr_max||'';
  insert into adress(ID,
  IMPORTED_DT
  )
  select
  SEQ_ADR.nextval ID,
  sysdate IMPORTED_DT
  from new_adress;
  END;

  Published by: totalnewby on August 23, 2012 06:41

  The SELECTION against the sequence should be dynamic as well. Otherwise, the procedure has a dependency on a non-existent sequence.

• How to create a sequence that generates in the form of intellectual property?

  Hello
  
  I want to create a sequence that can generate an IP numbers. as
  
  224.0.0.1
  224.0.0.2
  .
  .
  .
  224.255.255.255
  
  Is this possible?
  
  
  Thank you very much

  KinsaKaUy? wrote:

  Then, just the format of address IP (exercise left to you)

  Hint please :)

  Enter the socket interface ntoa - simple enough to reproduce in the SQL and PL/SQL.

  PS. Look in the section "+ dotted IP number +"-it should run to the top of implementation details.

• Create new sequences of the Razor tool

  Hello:

  I have a video of 2 hours of questions / answers in a forum.  I want this divided into 8 sessions of 15 minutes, each representing a different question.  I can cut the clip using the razor tool, but I don't see how to take each piece of 15 minutes and place it on a new sequence, thus creating 8 sequences.  I then export each 8 sequence regardless as a flash video, creating 8 videos flash can I insert into Dreamweaver.

  I tried to copy / paste, drag, but the sections cut do not seem to want to leave the original sequence that I imported.

  Ideas?

  Kind regards

  Rich Locus

  Create a copy of your full length sequence.

  Rename the duplicate sequence "Session 1" (or something similar)

  Edit this new sequence to include only the first session.

  Create another copy of your full length sequence.

  Rename the duplicate sequence "Session 2" (or something similar)

  Edit this new sequence to include only the second session.

  Repeat steps.

  Notes:

  Don't forget to work on duplicates, and then save your cutting the length.

  Create a duplicate sequence by selecting

  in the project Panel and then Ctrl + click - move.

• no option to create a sequence with uncompressed video playback

  
  Hi all!

  I can't find the option in the new CC Pro first "create a sequence with uncompressed video playback.

  The reference (p. 176) of the Adobe website manual reads:

  "...

  1. Choose file > new > sequence.

  2. in the dialog box new sequence, click the general tab.

  3. in the Edit Mode menu, choose the desktop.

  4. in the time menu, choose the desired rate, such as the 24, 25 or 29.97 frames/second.

  5. in the video section, choose the settings you want for the size of the image, the pixel format, fields and display Format. For example, 1920 x 1080,

  Square pixels (1.0), no fields (progressive scan) and offset 30 fps timecode.

  ..."

  I can't find any tab general and according to the editing mode in the dialog box new sequence at all!

  There are only three tabs:

  Sequence of Presets, parameters, tracks

  What I am doing wrong?

  Hello

  You will find what you are looking for on the settings tab.

  1. file > new > sequence

  2. in the dialog box new sequence, click on the settings tab (do not use CS6 or 5.5 in front of me but I think it's an old copy).

  3. in the Edit Mode menu, choose custom

  4. in the preview File Format, click Quicktime

  5. in the Codec menu, choose your /As option

  Screenshot see annex for reference.

  Peter Garaway

  Adobe

  Premiere Pro

• How do I create a sequence

  I have a query which give this result
  PIDM person_id term_code_eff unit_set

           116433     6632     200390             PH 

  1

           116433     6632     200390             RE 

  2

           116433     6632     200490             PH 

  1

            116433     6632     200490              RE 

  2

          116433     6632     200590              PH

  1

           116433     6632     200590             RE

  2
  

  Here is the code(it is ok if are not agree) I don't need critics of the code righ now, I just need to create a sequence, so I can have this thing done. 
  What I need is the following:   
  for each term like 200390 I need if the records have two majors(unit_set) to show 1,2,  
  The reasomn is because I need to put this in the cursor and the 1 are going to one column and the 2 to aa different one 
  
  here is the code 

  SELECT
  SEPARATE
  PIDM,
  person_id,
  term_code_eff,
  unit_set
  Of
  (SELECT a.sgbstdn_pidm AS pidm,
  person_id,
  substr (unit_set_cd, 1, 2) AS unit_set,
  a.sgbstdn_term_code_eff AS term_code_eff,
  Selection_dt as selection_dt,
  stvterm_start_date as stvterm_start_date,
  stvterm_end_date as stvterm_end_date,
  MAX (stvmajr_code) AS max_major, ROW_NUMBER)
  COURSES (PARTITION BY a.sgbstdn_pidm
  ORDER BY MAX (stvmajr_code) DESC)
  : THE NURSE
  OF igs_as_su_setatmpt_v@clink.
  sgbstdn_load has,
  Saturn.stvmajr,
  hz_parties@clink hz,
  Saturn.stvterm
  WHERE hz. Party_number = a.sgbstdn_oss_id
  and hz. Party_id person_id =
  and a.sgbstdn_pidm = 116433
  and STUDENT_CONFIRMED_IND = 'Y '.
  AND SUBSTR (unit_set_cd, 1, 2) = stvmajr_code
  AND STVTERM_CODE = SGBSTDN_TERM_CODE_EFF
  AND a.sgbstdn_term_code_eff! = (SELECT MIN (b.sgbstdn_term_code_eff)
  OF sgbstdn_load B
  WHERE a.sgbstdn_pidm = b.sgbstdn_pidm)
  and (TO_CHAR(SELECTION_DT,'MM/DD/YYYY') between TO_CHAR(STVTERM_START_DATE,'MM/DD/YYYY') and TO_CHAR(STVTERM_end_DATE,'MM/DD/YYYY'))
  GROUP BY
  a.sgbstdn_pidm,
  person_id,
  unit_set_cd,
  a.sgbstdn_term_code_eff,
  Selection_dt,
  stvterm_start_date,
  stvterm_end_date,
  stvmajr_code)
  GROUP BY
  PIDM,
  person_id,
  term_code_eff,
  unit_set,
  Selection_dt,
  stvterm_start_date,
  stvterm_end_date
  ORDER BY pidm.

  ROW_NUMBER() over (PARTITION BY pidm, person_id, term_code_eff)
  order of unit_set
  )

  Yes, I missed the order of. But, you are almost there. Lose the extra) after the term_code_eff. That should do it.

  Edit:

  Past slot the order of pidm at 'unit_set' as the pidm is located in the partition by clause.