no option to create a sequence with uncompressed video playback

Similar Questions

• Video Audio of Lag/bad on any medium, other than that with which I created my sequence with.

  Title says it all ^ ^

  To develop, if for example, I create a sequence of a video clip, the clip will be fine, however when I try to add a separate audio track for the sequence, the audio is of very poor quality.

  However, if I start by doing a sequence of audio, the audio is fine, but when I add the video track of the sequence, it is extremely laggy/choppy.

  I'm on Windows 10 so don't know if this has something to do with it?

  My computer specs are more good enough for the program as well.

  All comments would be appreciated.

  Hi Ben,

  Try the following steps:

  Put the graphic cards on the basis of Windows display drivers, then check.

  Go to Device Manager.

  Right click to update the driver manually.

  Once done modify the screen resolution and try to launch and control the playback

  Make sure you only select drivers for base maps.

  How to: install and update the drivers in Windows 10 - Microsoft Community

  Vinay

• Off-topic - How to give presentations in line with smooth video playback?

  Hello, our company web presentations and webinars.

  Currently, we use Go2Webinar and Join.me. They were both perfectly if we deal with static slide shows. But for a presentation, he had a few video files and they played back extremely agitated, which is quite understandable.

  Can anyone suggest a free / inexpensive that would solve this problem?

  I vaguely remember some services where all the files are uploaded to a server, which ensures smooth video playback on the receiving end, but can not dig up the name of the service provider. Any ideas?

  Thank you!

  Hello

  I suggest you use Microsoft Lync:

  http://Office.Microsoft.com/en-us/Lync/

  Also use your favorite search engine and check the desired software that meets the requirements and costs.

   

  Note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

   
  Hope this information helps.

• Make a Menu with options for audio different paired with different video

  Hello

  I was wondering if someone could provide assistance for the creation of a DVD menu with yet. I want to create a DVD menu that gives the user a selection option of the video background (choice of 3 or 4 videos) and then he would go to another menu of Option that would allow them to choose the sound to play while observing that chosen video (to choose among 4 different audio options).

  The idea is that someone can put it in the DVD and Menu guide them through the viewing experience. First, they could choose to look at the type of video as river ocean (a) (b) (c) whatever and then also have an option to choose which sounds to hear everything by watching this video named (one) guitar classical music (b) (c) any other audio

  I would like to then the selected VIDEO and AUDIO selected to be paid in loop/repeat mode to run continuously.

  I would REALLY appreciate help if someone could let me know how to do, or to provide a model if they have one, or a tutorial on how to do it using Adobe Encore.

  Thanks a lot for your time!

  Marc

  Basically, what you want to do, it's four (for example) have a calendar on your main/menu selection screen. This will lead to an Audio selection Menu, allowing the user to choose the Audio main or additional. I forgot the number of additional possibilities of Audio tracks on a timeline, but I think that you can have up to eight (8), but you may wish to check this. This ARTICLE link should provide you with this info. Choose the button will link to the timeline proper w / the selected Audio track. Note: Make sure that your Audio is EXACTLY, or very slightly more short, as your video. End action of timeline will connect on itself.

  Be sure to set the distance of appropriate title to your Menu, so that the user can exit the loop, without having to stop and then start again. Not sure if you do not want to get to the Menu selection screen or Audio selection Menu, but it's your decision. You can even choose to do Menu principal w / instructions and only one button, to go to the scene selection Menu.

  Good luck

  Hunt

• How to create a quiz with a video background.

  I need to create multiple quizzes, who must be present at certain times during the execution of a video.

  For example: a person look at a part of the video at some point must answer a question that appears on the video, then we choose the answer, and the video continues.

  It is possible to do? Insert a quiz on video?

  I use 8 Captivate. Thank you!

  A video background is not possible. You must split the video and put the parts on different slides, so that you can insert slides of issue between them. Maybe it's possible with Camtasia? I'm not sure, is not the latest version.

• Can what export Option I use to make an uncompressed video file Rec.709 color Mgmt

  . MPEG2 has color management, but is still frozen.

  The customer needs of my 1080 p broadcast file secure file.

  In fact, the final rendering must also be Pro Res 422 HQ, but if I can get just a non compressed output, I hope I can find a converter for the HQ of Res.

  .AVI is capable of only 720 x 480, when I hit the drop-down list

  Perhaps of Avid DNxHD codec?

• to create a preloader with a video

  Hi guys, im a little stuck and I hope someone can help.

  I do a preloader for a site and I want to use a video instead of the usual loading bar. the video is long of 428 images and I called him Preloader_MC.

  I've implemented the typical get bytes loaded:

  totalBytes = Math.round (getBytesTotal () / 1024);
  loadedBytes = Math.round (getBytesLoaded () / 1024);
  percentDone = Math.round ((loadedBytes / totalBytes) * 100);
  If (_root._framesloaded > = _root._totalframes) {}
  gotoAndStop ("start");
  }

  I want my video to go to the section that corresponds to the % charged (i.e. my long 428 video if 10% of the file was loaded he would go to the framework 43) have tried variations of the following code:

  preVidFrame = Math.round (Preloader_MC._totalframes/100)

  Preloader_MC.gotoAndStop(preVidFrame * loadedBytes);

  The idea is that the 1 line defines a variable called preVidFrame and sets it to 1% of the total number of frames in the video. Line 2 then preVidFrame of the times (1%) by the % of the loaded bytes and sends Preloader_MC playhead to the resulting image.

  Am I barking the wrong tree here, it is still possible. Any help would be greatly appreciated.

  Thank you

  If I am after the goal, I think the following line would be everything you need, using the already available percentDone variable...

  Preloader_MC.gotoAndStop(math.round(percentDone*Preloader_MC._totalframes/100));

• Problem with the video playback PC on Toshiba 43PH46P projection TV

  Hello

  first sorry for my English, but I hope you understand most ;)

  Currently, I'm trying to connect my Projection TV with my PC.
  Model: Toshiba Projection color TV 43Ph46P

  Because the doesn´t TV have a VGA-Plugin, I made a connection to my Pc with an adapter:

  http://www.Amazon.de/KanaaN-composite-video-Konverter-SCART-adapter/DP/B003U0PHC8/ref=sr_1_1?ie=UTF8&QID=1372072707&SR=8-1&keywords=adapter+SCART-VGA

  The Catalyst Control Center detects the TV after using the function "display to detect.
  After that I added the TV via 'extend' everything seems to be ok (on the PC side)

  But (there is always a but) I can not find the PC on the TV. I tried all channels (Ext 1-4 + other) but still had the blue screen.

  So, I could use help ;)

  Thank you
  Carter

  I don t think you have many options on the TV.
  What you have to do is to choose the right channel to the TV input.
  Everything else needs to be done on your PC.

  You the video signal correctly?
  I have no idea how it works on your computer, but on Toshiba laptops, you must activate the video using the function key (e.g. Fn + F5)

  Probably you don't have on your computer

• Problems with audio/video playback and the Source window

  I have some videos that I try to import into my sequence. Whenever I have open the video in my source window (or drag it to the timeline), the sound goes crazy. He starts to jump and identified himself. When I open the movie file in Quicktime format on my computer, it opens and plays very well. In addition, I don't know if it is not connected, but sometimes, when I open a video in the window of my Source, there is no audio. I can drag to the sequence and double-click on it to put the video of the sequence in the Source window and it plays very well.

  The video that I have problems with is a .mov, filmed from an iPad (not sure what model of iPad). It is filmed in Portrait mode, do not know if it matters. Please let me know what other information would be necessary to solve this problem.

  
  Thank you!

  First, answer the questions in the FAQ of Information http://forums.adobe.com/message/4200840

  Second, it IS possible whether the ipad video like video iphone

  IPhone will not edit easily because it uses a variable rate

  -A fix in the #22 http://forums.adobe.com/thread/934466 message

• I have a problem with an error for the ad blocker that interferes with the video playback

  Whenever I try to watch a video, I get this error message:

  Oops, you have activated an adblocker!

  To watch this episode, please disable it and refresh the page.

  I removed anti-ad, refresh the page and the error came again. I have installed firewall bluhell and handicapped who, refreshed the page and the error message still appears. I've added will eliminate them permanently, click on remove and which did not help. I never had these problems before.

  Maybe a different extension is at stake. Could test you mode without failure of Firefox? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

  Does not work if Firefox: Hold down the SHIFT key when you start Firefox.

  If Firefox is running: You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  and OK reboot.

  Two scenarios: A small dialog box should appear. Click on 'Start mode safe' (not update).

  That you still get this message?

• Problem with creating a sequence

  Hello
  
  I'm having a problem with a sequence that I am creating. Basically, I'm trying to create a sequence with a default value based on the value in another table, i.e.

  CREATE SEQUENCE seq
  START WITH (
              min(customer_id) from customer
              )
  INCREMENT BY 1;

  Is this possible? I get errors.

  You can use dynamic sql or, if you use SQL * more take advantage of substitution variables:

  SQL> DROP SEQUENCE seq
    2  /
  DROP SEQUENCE seq
                *
  ERROR at line 1:
  ORA-02289: sequence does not exist
  
  SQL> DECLARE
    2      stmt VARCHAR2(1000);
    3  BEGIN
    4       SELECT  'CREATE SEQUENCE seq START WITH ' || min(empno)
    5         INTO  stmt
    6         FROM  emp;
    7       EXECUTE IMMEDIATE stmt;
    8  END;
    9  /
  
  PL/SQL procedure successfully completed.
  
  SQL> SELECT seq.NEXTVAL FROM dual
    2  /
  
     NEXTVAL
  ----------
        7369
  
  SQL> DROP SEQUENCE seq
    2  /
  
  Sequence dropped.
  
  SQL> COLUMN s NEW_VALUE s NOPRINT
  SQL> SELECT  min(empno) s
    2    FROM  emp
    3  /
  
  SQL> CREATE SEQUENCE seq START WITH &s;
  old   1: CREATE SEQUENCE seq START WITH &s
  new   1: CREATE SEQUENCE seq START WITH       7369
  
  Sequence created.
  
  SQL> SELECT seq.NEXTVAL FROM dual
    2  /
  
     NEXTVAL
  ----------
        7369
  
  SQL> 
  

  SY.

• I am creating a book with iphoto and to insert a map with the locations, I realized, I could add the card, but not the location when I go in option

  I have created a book with iphoto and that you have inserted a card. I can't add the cities that I visited when I option

  Can someone help me

  Thank you

  What card theme you are using?  And what version of iPhoto?  Your internet connection is working?

  In iPhoto 9.6.1, you can add a location in layout mode.  Zoom in on the map and ctrl - click the location on the map, and then select 'Add Place '.

  In mode 'Options', you should be able to press the button "+" and type a name for the place. The location search pictures by name. You can also ctrl - click on the map and add the location manually.

  What happens when you try to add a place? You get an error message?

• First Pro CC does not create a new sequence with a new project

  I'm sure I must be missing something, but when I create a new project in first Pro CC, it does not automatically create a new sequence.

  In CS6, create a new project would cause a list of sequence presets, and then create a sequence is empty for you.

  In CC, once you have created a project, you end up looking at an empty timeline.  You then go to the file, new, sequence and it do.

  Looks like a strange step to include, no?

  Is there a setting that I have not found so made CC to create new projects with a sequence like CS6?

  Yes, as Jim mentioned, there are other ways to create a sequence.  For example, simply import your video footage and then with a clip selected, choose file > New > sequence of the Clip.  Or in the project Panel, drag an item to a new item icon.  Much easier create the sequence of way, rather than by reading all the parameters in the dialog box new sequence and try to understand which attributes correspond to the media they work with.

• Create the Select sequence with the request number

  Hi all
  
  I would like to create a sequence number in oracle, but instead of coding hard 'start with' I want to choose the max value of the primary key of a table and add 1 and use it instead:
  
  So what I want is:
  

  CREATE SEQUENCE crg_mrec_seq
  MINVALUE 1
  MAXVALUE 999999999999999999999999999
  START WITH select max(primarykey)+1 from table1
  INCREMENT BY 1
  CACHE 20;

  I guess I have to spend this max value as a variable in the create sequence number, but I'm not sure of the syntax to use.
  
  Thank you
  Ed

  Hello

  The START WITH value must be a literal NUMBER. You need dynamic SQL statements to do what you asked.
  EXECUTE IMMEDIATE, as mentioned above, is a way to make the dynamic SQL statements.
  In SQL * Plus, the substitution variables are another.

  COLUMN     first_num_col     NEW_VALUE first_num
  
  SELECT  MAX (primarykey) + 1        AS first_num_col
  FROM      table1;
  
  CREATE SEQUENCE crg_mrec_seq
  MINVALUE 1
  MAXVALUE 999999999999999999999999999
  START WITH  &first_num
  INCREMENT BY 1
  CACHE 20;
  

• C# create file of sequence with markets

  I am using the c# API in order to create a sequence file that can be loaded in TestStand. When I try to create a step, I gives me the error:

  Additional information: step enter 'Action' not found in the type list

  I am using the following:

  class Teststand
  
      {
  
          Engine engine;
  
          File SequenceFile;
  
  public Teststand()
  
          {
  
              engine = new Engine();
  
          }
  Public Sub new_sequence()
  
          {
  
              engine = file. NewSequenceFile();
  Sequence seq = engine. NewSequence();
  
              Name = "Example".
  Step motor =. NewStep ('no adapter', 'Action');
  
              step. Name = "step Test".
  save_sequence_file (@ "C:\Users\me\Desktop\output.seq");
  
          }
  public void save_sequence_file (string file_path)
  
          {
  
              file. Save (\\server\share\file_path);
  
          }
  
      }
  
  }

  I know that I'm not add step to the sequence file immediately, but certainly would not be the cause of the problem? Why can't he find the step type? I tried several types and even tried

  StepTypes.StepType_Action

  Gives me just the same idea.

  I'm very confused about how to specify the type of property, can anyone help?

  Hi adam_.

  It is recommended to add the new step in the TypeUsageList of the sequence file is inserted it into:

  class Teststand
  
      {
  
          Engine engine;
  
          File SequenceFile;
  
  public Teststand()
  
          {
  
              engine = new Engine();
  
              engine. LoadTypePaletteFilesEx (TypeConflictHandlerTypes.ConflictHandler_Prompt, 0);
  
          }
  Public Sub new_sequence()
  
          {
  
              engine = file. NewSequenceFile();
  Sequence seq = engine. NewSequence();
  
              Name = "Example".
  
              file. InsertSequenceEx (file.) NumSequences, seq);
  Step motor =. NewStep ("no adapter", "Action");
  
              step. Name = "step Test".
  
              file. AsPropertyObjectFile(). TypeUsageList.AddUsedTypes (step. AsPropertyObject());
  
              seq. InsertStep (step 0, StepGroups.StepGroup_Main);
  save_sequence_file (Environment.GetFolderPath (Environment.SpecialFolder.Desktop) + @ "\output.seq");
  
          }
  public void save_sequence_file (string file_path)
  
          {
  
              file. Save (\\server\share\file_path);
  
          }
  
      }
  
  }
  
  

  Here are the things I added to your code:

  1. Engine.LoadTypePaletteFilesEx
  
  
  2. SequenceFile.InsertSequenceEx
  
  
  3. TypeUsageList.AddUsedTypes
  
  
  4. Sequence.InsertStep
  
  
  5. Environment.GetFolderPath (Environment.SpecialFolder)

  Kind regards

  The f