Creating a single setup program, including the DSC Run-Time module

Similar Questions

• Can I create a task that includes the 2 c series modules?

  I am trying to create a single task that includes 2 modules of the series C OR - 9425, but when I wire the constant "Mod3/port0, Mod4/port0" physical channel in the DAQmx create Virtual Channel.vi I get error-200086 which indicates the syntax range physical channel in the input string is not valid because several devices have been included in the chain.  It is my understanding of LabView help this multidevice tasks are allowed.  Also according to article KB http://digital.ni.com/public.nsf/allkb/CF85114C6025C84C862571C000722DDA devices multiple tasks are supported for devices of the series S, series C and DSA devices, and according to this article KB http://digital.ni.com/public.nsf/websearch/78E44565FD87E7D686257108007F94F8?OpenDocument I formatted my constant of physical channel correctly.

  Please can someone explain why I get this error when all indications are that this should be a simple thing to do?

  My C Series modules are in slots 3 and 4 in a chassis cDAQ-9188, I'm currently under LabView 8.5.1, with Windows XP

  Thank you

  Eric

  Hi Eric,.

  I am afraid that you cannot configure the hardware timing with the module 9425 in CompactDAQ. The NI 9425 data sheet explains: «the NI 9425 is a static digital module, so you can use it to perform only call by the software or static operations when installed in a chassis NI CompactDAQ.»

  For I, AO and countertops, daisy chaining multiple calls to DAQmx create channel equivalent to specifying a list of physical channels, but it's different for DIO. Only one virtual channel DIO can contain several physical channels (lines). It would be quite reasonable to assume that by specifying a list of lines 'with a single channel for all lines"would cause DAQmx put all the lines in a single virtual channel, but see how it is implemented under DAQmx, is not possible when the lines are on multiple devices. Also, it would be reasonable to assume that if DAQmx could not put all the lines in a single virtual channel, it would create a virtual ring road, but that is not how it is implemented-, it returns the error you received.

  Instead, here are two approaches to all 64 lines in a single task. Either we have to work.

  Approach: create a single task, containing two virtual channels (MyChan0 and MyChan1). MyChan0 contains cDAQ1Mod3/port0 / line0:31 and MyChan1 contains cDAQ1Mod4/port0 / line0:31. Digital 2D Bool NChan 1Samp read VI returns a 2 x 32 table of Boolean. To flatten it into an array of 64 elements D 1, you must use the table to reshape or some other method.

  

  The task of DAQmx > ownership of channels is here to show that there are two virtual channels named MyChan0 and MyChan1. Also, I used a loop for to show that you don't have to encode multiple calls to DAQmx Create Channel. The constant "a channel for all lines" is redundant because it is the default value.

  B approach: create a single task, containing 64 virtual channels (MyChan0 through MyChan63). This example uses the constant 'a channel for each line', which is not the default. MyChan0 contains port0/cDAQ1Mod3/$line0, MyChan1 contains cDAQ1Mod3/port0/line1, etc.. Digital 1 d 1Samp Bool NChan read VI returns an array of 64 D 1 of Boolean elements. If you have used the Digital 2D Bool NChan 1Samp VI instead, you would get a 64 x 1 matrix, there are 64 virtual channels with 1 line of each.

  

  Brad

• How to export my history of travel (including the date and time) to a text file?

  I need to collect data on the amount of time I spend on specific sites, research on my thesis topic. In my browsing history data. I need a way to export the data from the history file including the date and time information in a format that is easy to parse (.txt file delimited by commas, etc.)

  You are welcome

• Can I run two separate versions of the LabVIEW Run - Time Engine on a PC?

  Hello, I am curious to know if anyone knew if it is possible to install and use the two separate versions of the LabVIEW Run-Time Engine on a PC?  I have currently 2009 runtime engine installed on a machine, and I wanted to install the runtime for 2011 as well. I know that you can run two separate versions of the LabVIEW program on the same machine, but what about the Run-Time Engine?

  Thank you!

  No problem at all. I currently have the engines of execution for 8.2, 8.6, 2009, 2010 and 2011 on my computer. Multiples are no problem at all. Go ahead and load.

  Rob

• How to create a full page border, including the header and footer?

  Hello

  So, I'm new to Muse but I'm loving far! I am trying to create a border of 1 px around the entirety of my page, including the header and the footer, which surrounds the whole of each page (regardless of the specific height of the page). I tried to create the border on the master page, but on other pages, the border is that the size of the image of the master page, no matter how large, I put the master page.

  Is it possible to have an object extends through (and around) the header and footer and scale to the size of the page, depending on the amount of content there is on the page? Thank you!

  
  John

  Go to your master page, deselect all items, and then use the run command in the command band on top of the application window.

  Your second question: element use identical 2, which lie precisely on the other. Pin the element of punch to the top of the page and the second to the bottom of the page. If the page grows, it will look like a, item "long".

• The aging programmatically on a single item in a Menu of Run-Time

  Hello

  Is is possible programmatically grey out (via a property node or otherwise) a single item in a menu of the run time?

  For example, see the image as an attachment.  When my program is in a certain State, I want the ' tools > Options genius "element to be gray.  The rest of the time, I want it to be activated.

  Is there a way to do this?

  Thank you very much

  Dan

  Hello

  This could be the function you are looking for?

  

  Hope this helps

• How create a visible counter that reflects the number of times a form is submitted?

  I have a form that I want to count the number of submitions and I want so that it can be displayed in my Web page. Any ideas?

  You don't need a database if you want to only count the number of times that a request has been sent.

  What you need is a text file called counter.dat or similar and place the code in the form Manager to open the file and place a new value in the file.

  If you have PHP code will look like

  $cf = "counter.dat";
  $fp = fopen($cf,"r");
  $ct = trim(fread($fp,filesize($cf)));
  if ($ct != "") $ct++;
  else $ct = 1;
  @fclose($fp);
  $fp = fopen($cf,"w");
  @fputs($fp,$ct);
  @fclose($fp);
  

  GRAMPS

• Standalone Mac App LabVIEW - include Visa & LabvIEW Run-time

  Hi all

  I used LabVIEW for more than a decade, but only for Windows, just enter in LabVIEW for mac, please pardon the ignorant questions.

  I am developing a project very simple stand-alone deployment that must Run-time LV and NI Visa. My project uses a simple USB-Serial device that I talk with Visa. I used this link to condition the LabVIEW execution with my application. I think I need NEITHER Visa driver package as well. I don't know how to do this. Someone has experience racing drivers with stand-alone apps for LabVIEW under mac? Thanks for your help.

  Hi SK8.

  Unfortunately there is no way to add the option to install on the MAC, you said, that you can create the package to install the LabVIEW runtime engine and the application, but in order to install drivers OR Visa, he will have to be installed separately.

  Kind regards

• How can I get rid of the message "Run Time Error" in Windows XR home when I open my computer?

  When I opened my computer I get the error message "run time error. Your computer wants to close in an unusual way. I clicked and after it appears once again twice more, and I click it every time, he goes and I can use the OK computer.

  With the utility 'disk cleanup', & defrag, within a normal time, try

  R.clicking my computer, properties, advanced, performance, file, change

  button with selected C:, the value to "let the system manage", click on set 2 X, close, restart

  PC.

• Run the Application's Setup program and the editor is unknown

  Hello

  I made an installer for my application and filled all the information of the company. But when I run the Setup it comes a pop-up windows and says unknown Publisher.

  

  How can I change this?

  Thank you!

  Norbert_B, which is not true - you can sign your executable files and installers with a digital signature and which apply the Build specification. It * is * use of NIs to allow you to sign executable installer with your own certificate.

  You'll need to generate a certificate and install it in Windows, you can then use it to sign the request. So that it appears as a provider of "verified" (green), you need to use a trusted certificate (for example verisign etc.) to generate the signed certificate - it usually comes with a charge. You can create a non-checked yourself - certificate google it.

  Executable file:

  

  Installer:

  

  This is the basis of knowledge NOR on the subject: http://digital.ni.com/public.nsf/allkb/E06C1800F5AFCCBF86257236006C9F2A

• Why the process of installing XP mode continually fails when I try to run the Setup program for the first time?

  I have a new desktop computer with windows 7 Professional.  I downloaded Microsoft's XP mode.  Whenever we start the installation, it will fail at the last step of the installation process.  Several times we ran the installation program.  We tried to re-download the software.  Always the same result.  Setup has failed.  Any suggestions?

  -Temporarily disable your anti-virus utility.

  -Also, make sure you install Windows Virtual PC before installing Windows XP mode.

  http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/

• SpeedBit has ruined all my programs. Cannot open/run programs including the use of my FAVORITE BROWSER - MOZILLA FIREFOX. Help! PLEASE, I DO NOT KNOW WHAT TO DO

  I don't know that started it all. I have been using Mozilla Firefox as my #1, favorite and, of course, my favorite on Internet Explorer, Google Chrome, Opera browser... That's all just great. In addition, I had used 10 DAP Premium, SpeedBit downloader and converter downloader. Everything to go well for more than a year. Then all of a sudden, sometimes about 2 months ago, I opened my browser, tried to run so that I can go online. And here, I got a message saying: C:\Program Files\Common Files\SpeedBit\SBUpdate\sbfi32.dll is missing. Try reinstalling the program to fix the problem. Well I did - probably at least 20 times, but no help, it did not work. Now, I can't open my programs/software even more because the same message keeps popping up. Personally, I think that something must be done to those who wrote the program - if they wanted something malicious [in] the software - I REALLY NEED HELP!

  Try to uninstall speedbit from the control panel.

  • http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  And update firefox to getfirefox.com

• Error: "the patch cannot be installed by the Setup program because the program is missing" during installation and Service Pack 2 for Corel Draw X 3.

  original title: corel draw X 3 need a file to upgrade to work and will not install Windows install. I am running XP

  Windows Installer won't install Corel Draw X 3 patch for Corel SP1 and SP2.  Corel X 3 was released at the end of the 1980s, well before updates from Microsofts SP.

  These files are patches for the X 3 program and have nothing to do with Microsoft SP 1, 2 and 3.

  The error that gives the installer of windows, is that the patch cannot be installed by the installer, because the program is missing (which is not the case) or the upgrade patch may update a different version of the program, (which he did... this fix is designed especially for the X 3 only and is in fact the upgrade for him.)

  It says to check that I have the program on my computer and I have the appropriate fix. (What I'm doing.)
  NOTE:
  Last week I had to remove Corel X 3 from my computer and re-install. After that, I couldn't get the patch installed, and it needs those 2 patches to work properly.

  I am running XP Pro with MS Service pack 3 on my computer.  I have Intel pentium 4, 2944 usable Mg 300Ghz installed memory 266,80 GB of free space on 2 hard drives.

  Another site said a faulty windows installer can cause "out of memory" errors and has spent in Corel Draw so I deleted and reinstalled as I've mentioned above. Any ideas on how to get this installed?  Hope you can help, I don't know where to turn to the next if not. Corel does not support this program because of his age. I can't afford to update at the moment so I have a problem here. Any help would be much appreciated. Thank you

  Been away in a few days. Just in case anyone else has this problem, I found the answer. It's one of those moments DUHHH.

  If you use the version of Corel Draw X 3 13.0.0.739, there already = sp1 and sp2 patches and pre-installed horfix.

  Should check that the first step, but I thank you

  David Vinod to try to help this sometimes fictitious.

  Best regards, Frank

• Unable to find the Setup program after the download and installation...

  I downloaded the 1 'blue button' this: http://www.microsoft.com/windows/virtual-pc/download.aspx?runGenuineCheck=true&system=9&lang=8&buttonClicked=winVirtualPC
  And the 2nd, but these 2 are the same, according to my computer...
  My computer downloaded these links and install too, but I can't find the "setup" for Windows XP.
  I followed all the steps, help me!

  Go to the site, once again, run the update, it will say that the validation is successful and brings you to the next page where windows xp mode was going to start downloading.   If this post answers your question, click mark as answer .

• Management agent online Microsoft Installer error 1714. The previous version of the Setup program of the microsoft online management agent cannot be deleted

  Hello

  I have a 64-bit windows 7 with the following errors:

  On the Intune Console, I get the following:

  

  On the computer logs, I get the following errors:

  Product: Microsoft Online Management Agent Installer - error 1714. Cannot remove the older version of the installer of Microsoft Online Management Agent.  Contact your technical support group.  1612 system error Product: Microsoft Online Management Agent Installer - error 1714. Cannot remove the older version of the installer of Microsoft Online Management Agent. Contact your technical support group. System Error 1612. (NULL) (NULL) (NULL) (NULL) (NULL) 7B38333138363533462D344235372D324138372D354243392D4646443834463436314246327D

  Cryptographic services failed during the processing of the OnIdentity() call in the System Writer object. Details: AddWin32ServiceFiles: Cannot save the image of the network Microsoft QueryServiceConfig API with no inspection service System error: Access is denied. . Details: AddWin32ServiceFiles: unable to save the image of the service Microsoft Network Inspection QueryServiceConfig API with no system error: access denied.

  Put an end to a transaction of the Windows Installer: C:\Program Files\Microsoft\OnlineManagement\Updates\Download\Install\3a37a2a073d980d8441a09835c55ed5d\OmAgtInstaller.msi. Client process ID: 7296. C:\Program Files\Microsoft\OnlineManagement\Updates\Download\Install\3a37a2a073d980d8441a09835c55ed5d\OmAgtInstaller.msi 7296 (NULL) (NULL) (NULL) (NULL)

  I completely uninstalled Intune to the machine, through registry and deleted all entries that will find there for Intune and Endpoint Protection.

  The issue is that Intune installs successfully, but will fail to install all updates or endpoint protection. Initially, I removed the software because it has problems. In other cases, I've never had problems with uninstalling and reinstalling.

  How I uninstalled:

  From the console, I recused myself from the computer, whereas delete the software. I noticed that the deleted computer Intune EndPoint protection, so I had to manually remove the program from endpoint protection.

  It is a forum for specific consumers. If your system or IT service can help you (or you are SysAdmin / computer SCIENCE Department), you can find appropriate support in Win7 IT Pro-specifiques forums-online https://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro

  Good luck!