Similar Questions

• How can I create a mirror from a photo image

  How can I create a mirror from a photo image

  Hi Malcolm,.

  Choose the crop tool in Photoshop Fix. Then choose 'Fip H' or 'Flip V' in the options of the harvest.

  Mike

  

• How to start the Toshiba Ghost image from the HARD drive files

  Hello

  OK it's a difficult question, but I hope that some tech/wizz can help out me.
  I have all necessary recovery CD but my laptop Toshiba CDRom drive died and I looking for replacement at the moment.

  I managed to copy the image files and all the other info of these CDs on the hard drive to laptop via a network of my cdrom office. I tried to use the Office CD-ROM to start the disk 2.5 "laptop, but he knew it wasn't a computer toshiba laptop so wouldn't let me not repeated.

  However, now, I managed to copy all files from ghost image on the hard disk of laptop I'm stuck on how to run the installation via back.
  The portable hard drive is formatted and all I have are the following files

  span.bmp
  setenv.bat batch file---> contains the following lines
  OFF @ECHO
  SET GHOSTPAR =
  SWN = 01237000 SET
  SET EXT = GHO
  SET VOLLABEL = % SWN
  SET FILENAME=%SWN%.%EXT%

  01237001.GHS---> PART 2 IMAGE
  01237000.GHO---> GHOST IMAGE MAIN
  01237000.CRC

  A folder called G_INST
  which contains 3 additional files BMP, BACK, TOOLS and span.bmp

  I can't understand how I can run ghost extraction and recovery my can drive HARD someone help me :)

  Thanks in advance
  Simon

  I'm really skeptical if you can launch the second partition Toshiba ghost image files without using the Symantec Norton Ghost software.

  I created a ghost of the C partition image and placed on the D partition.
  Recover the C partition to start the utility of Ghost and having to use the file D partition .gho image

  I googled a little and found useful instruction how to recover the Portege M3500 without using a CD/DVD drive. Maybe it will work also on the A30 Sat.
  http://mobilepcwiki.com/MPC/index.php?title=Toshiba/Portege_M3500/FAQ

  By the way: the STRANGE internal, compatible can be ordered from the ASP in your country!

• Copy a ghost image from a USB on a DVD? -Windows 8, is it possible?

  Sorry, maybe it's here somewhere but I can't find the user friendly site!  I especially need to know if this is possible and simple instructions would be great...

  That's the computer of my mother (his first!) - which is a few hundred miles of me.

  It is a Toshiba laptop and was running Windows 8 (now updated I think to 8.1), no disk etc. not provided. We put teamviewer in place so I can get access to distance, but not sure how useful, it would be something like that.

  I was visiting and set it for her. We didn't have a DVD at hand to be a ghost of the game image original so I used my large capacity USB flash drive (usually has photos of my children etc. baby - I leave there as a return upwards etc. home fire)

  It's one of those jobs, I still intend to do but it doesn't seem simple and I don't have round to... he bought just for more than a year.

  Is it possible to transfer the ghost image from the memory stick to a DVD?  (preferably using Windows 7, but could wait until I have visit again and use Windows 8)

  I could do another copy (I guess this would be the current set up, but that should be ok I think) on a DVD?

  Or would I better just buying another flash (they are much cheaper now!) but I have a lot of DVD here it seems a bit of a waste...

  I guess the first thing is that possible?

  Hi Lusi,

  Thank you for the update.

  Creating installation media will help you reinstall Windows. However, you must have the correct product key license to validate the OS. In Windows 8, the product key is previously injected into the BIOS. So, as the system has already had 8 Windows installed, it is unnecessary to type a new product key. Therefore, install Windows 8 from the created installation media would serve the purpose.

  Keep us updated to any other help, we will be happy to help you.

• Satellite Pro A120: my Ghost image created new does not work

  fokes, all the ideas that we are stuck and as normal phone support fate with a cracker of a response... "it seams Ghost is too recent." and unsupported. "

  have a master machine installed and the installer under windows xp pro and about 60 bits of software school, smartboard and network settings. preparation time was about 2 days, so don't want to do the other 11 manually...

  I took the image via the network and then sent to a new machine, and bingo, he sits on the bios screen, now enter the detailed checks so I can see what the bios checks the hard drive is fine and its just hanging somewhere on the wick between bios and where the hard drive takes over.

  OK test 2, take the hard drive of the machine master and make a ghost of disk to disk to a new machine, image ends fine, replace the hard drive in the machine, try to start new machine, bingo same problem lies just to the bios.

  After each test, the machine master fine boots.
  have you tried the main hard drive in two new machines, its fine
  have reinstalled xp pro cd on two hard drives, it must be installed fine
  running spinrite all 3 disks that are very well
  Ghost does not all problems with the master drive
  have tried a fixboot and fixmbr chkdsk on the new machines after they have been imaged, still no start

  This is the first time we had a problem with the ghosts of the machines of tosh in 7 years, (copied about 50 machines so far this year, as some of this model) just woundering if they changed something in the batch or the version of the bios?

  answers please as soon as possible, thank you very much
  Andy

  Hello

  I can't give you a precise answer why your new created Ghost image does not work, but I found this Toshiba useful knowledge base article

  Norton Ghost 8.0 BACK tool is not put on the road correctly if you try to make an image of your drive or partition.
  http://support.toshiba-tro.de/KB0/TSB5400Z20008R01.htm

  and

  Norton Ghost 8.0 or 8.2 BACK tool is not put up properly on machines with S - ATA if you try to make an image of your drive or partition
  http://support.toshiba-tro.de/KB0/TSB6801JL0006R01.htm

  Maybe your allowed some ghost image parameters that are not supported by satellite Pro A100 or missing some drivers SATA or IDE!

  It seems in any case, there is nothing wrong with the Toshiba laptop. All functions using the Toshiba Recovery CD. Created your new image is not 100% good!

• What to learn how to create a 'ghost image' when hovering over a picture

  Can I make photographs of product for e-commerce with the PS?

  In your original post you mentioned:,.

  create "ghost image" when hovering over a picture

  Can you explain exactly what you want?

  Do you want a strong image on a Web page that displays a "ghost image" when you go over it with your cursor?

  If so, this is controlled by the design of site Web NOT in Photoshop.

  You should contact the company that provides the development of Web sites about this issue.

• Imports to create my destination but put the images in a subfolder under my destination (always under the same name but different from my folder created)

  Imports to create my destination but put the images in a subfolder under my destination (always the same name but different from my folder created under) Lightroom CC 2015.3

  I solved the problem. I think that this should be addressed.

  When importing from is no possibility for "put it in a subfolder when.

  display all the options. But there is down to bottom left a little box that

  When hovered says 'show fewer options'. When this window opens and copy

  is selected, it offers the possibility to in a subfolder. Who has been

  selected and the origin of the problem.

  It is an option that should show the full screen, but also the show

  under the screen.

  Monroe

  Monroe Halpern

  [email protected]

• Why several ghostly images when I play the video in the timeline?

  I'm new to Speedgrade and I understand how it is powerful - but I think it's completely intuitive compared to After Effects or first or even PhotoShop.

  I loaded a test clip (30 p ProRes) and when I try and play and watch on the configuration of the monitor I get four ghostly images of the shooting.

  I'm not using an external monitor as I am shaken upward in a hotel room working on a MacBook Pro.

  In order to speed (ironic, huh) I'll probably make the colors work in After Effects, but if someone can point me in the right direction I would appreciate it.

  Forgive me if this info is already posted on the forum - I tried search but he came up to the top with a white and a large number of tutorials.

  Don't not seen this... but it would be good to get a few things to help you. SpeedGrade is a program unique, but it's actually quite simple to use once you begin to understand the controls and what they do, which is often a little different from what is a noob expected... as when I started with him, I have found certainly!

  First of all, it is more demanding of hardware damage even... If the Sg doesn't like your platform, it will simply go crazy doing nothing. He won't give you small problems like stammering, he'll do great things that obviously does not work. So... that's just MbPro got for the video/graphics card? And how much RAM? Computers that use the graphical features embedded very rarely work well with SpeedGrade. Under 8GB RAM... don't even think on this subject. You MIGHT be able to live with 6 GB of RAM, as some people have claimed that they did... but this isn't a nice job... slowing.

  Following... is this a project of SpeedGrade 'native mode', where you open SpeedGrade and a new project, and then make a timeline it in SpeedGrade, or a draft Premiere Pro sent to Sg by using the command "live from SpeedGrade?

  Initially, I found Sg so impossible, that I used Ae a little myself. Now... I was not to AE for a long time, except to say fight against noise or create a sequence of reading can do a LUT of her.

  First step to a colorist or the marshalling of the app is neutralize your videos... Making it NOT enough. It's a different passage home and down the road. In this step, I don't even look at the picture very much... I'll have the RGB Parade, Luma and YUV Vectorscope 'up' signal and watch, particularly the parade & wave. I select the slider controls (in color wheels) and unlock all the controls I use (the small icons of lock). I'll adjust individual controls in color on the section Offset (left set of sliders) to match the bottom of their footsteps a little over 2 or more, I will look to see if it's ok or should it perhaps a little lighter with this image. The switch for the Gain sliders (right) and set them to basically same heights for the scope of the parade, with their vivid the two lower at 100 and research appropriate for the image. It is sometimes as low as in the 1960s, sometimes as high as 99.

  Next is to use the Gamma sliders (in the middle) to correspond mainly to the parade & - waveform traces... all easily identifiable 'forms' in the mid tones I will align with each other.

  The foregoing leads me what... 20 seconds? May 30 at the most.

  Then I switch back to the color wheels and compare the images with my eyeballs and the vectorscope... How is the saturation and... How is the balance of color/tint and the proportions compared to what I'm used to seeing on the field and the monitor? At this point, I'll do a bit of tweaking of the Gamma & Gain color wheels and luminance sliders, perhaps use contrast, temperature, magenta or rotate the cursors in the cursor above group wheels. This neutralizes things pretty well.

  Can do... Nice... or better. JUST looking at a picture's contrast, luma (lamps or dark) or chroma (color)... where's the good contrast, where... not very good? You can have too little contrast color (saturation) in the midrange, but perhaps too in the brights... or your shadows can all tend to block upward around 5-20, when you need to go up a little higher. This is where the tabs above the wheels of color shine... This example:

  

  The tab made highlights chosen... No, you have still three wheels, each with (vertical slider) luma and chroma controls (wheel)? They overlap, and in order to play a bit with a ramp is great. A "ramp" is a tonal graphic staircase from black to gray in several stages, make an and import... then play around with the settings and see what effect each has... where on the ramp.

  Here, on the tab highlights... the rightmost is very bright pixels in the clip, with overlaps down the scale a little. Controlling the environment moves mainly on the third median of this, the upper third of the image around... with some effect in the poorest and brightest pixels in this part of the scale. The right control is the bottom of the upper third... usually used to help blend in the midrange. Also... See the control 'grayed out '? Set that say gray color and pixels that you change will be in color, the rest of the shaded image. You can see directly what you change.

  So... as you have three basic commands, Offset, Gain and Gamma, and three controls each for shadows, average and clear tones, you have a LOT of very refined tweaking you can do. Also... Note the vertical slider to the left Luma control for the facts tab highlights? In text turned on its side, it says mph... who is the pivot of control that defines WHERE on the scale of the end of the midrange and treble begins... you can move upwards or downwards. Among the witnesses of midtones, you have sliders on both sides, one for the breakpoint of shadows/Mids, one for the breakpoint Mids/facts highlights. Shadows tab has a pivot for the shadows/shades breakpoint.

  It affects all the cool things you can do with the secondary and masks and other... but it's long enough for now!

  Neil

• Recovery CD work not (Satellite A10) - need password for ghost image

  Hello

  I have a Satellite A10, which took its CD player died. I need to reimage using the recovery disks that came with it, but I can't because I don't have an external hard drive that is very convenient.

  What I can do is copy ghosting from disks of recovery on an external USB drive, boot from that and then run Ghost and picture then the laptop of the ghost image, which I copied from the CD.

  Only problem is that the image is locked with a password I do not know. Toshiba is able to provide a password or let me know how to get the required password so I can use the image on my laptop?
  See you soon

  Patrick

  Hello Patrick

  To be honest I don't think that you will get this password. That should give you?
  In my opinion, you should buy the new optical disk drive and be happy with your laptop.
  Satellite A10 is old enough laptop model and sides are not expensive.

  Alternatively, you can get one on eBay.

• Deleting files from the Digital Image Starter Edition 2006

  I'm having a lot of trouble trying to remove files from the Digital Image, Library 2006 Starter Edition.  It is in such a mess with files for all my music files, Readme files and many other files that have no photos or videos.  I tried everything to remove these including uninstalling and reinstalling without the time, but it keeps always pick up these files and is therefore very difficult to find the image or video file that you need.  I want to delete all the files in the library and implement only the image and video files, which I need.  Can anyone help please?

  Hi volunteer J - I found the POD PD3 file, but when I go to change the type of file to the FORMER, he said that changing a file extension can render the file unusable.  I have copied all the Microsoft file along with the POD file, but wonder whether he should actually do this.  Advice please. -Thank you

  ===============================================================
  It's just a standard message warning... If you renamed the file back to Pictures.pd3 all
  would be as it was before you it renamed to Pictures.OLD.

  Of course rename will make it unusable, but it's what you need to do if you want to delete the library.

  Renaming or deleting the file Pictures.pd3 will force the Digital Image to create a new Pictures.pd3 file.

  If the warning message affects you... try to rename this OLD_Pictures.pd3 way

  I guess that you know, that the Starter Edition is only a 60 day trial version?

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Get the error (64 exception type x) which tent to install windows7 64-bit from the ISO image on the construction of the new PC

  I just installed a new motherboard, CPU and RAM and I have purchase windows 7 (download) and tries to start a ISO DVD image. There are data on the old hard drive but I want to format it and install win 7 If a completely clean install.

  The error starts something like the following:

  !!!  x 64 type of exception - 00000000000000003!

  Then goes with other lines such as

  RIP - 00000...

  RAX - 00000000

  RBX - 0000000

  and so on

  Here is my new PC build specs

  Motherboard: MSI - 760GM-P23

  Processor: AMD FX6100

  RAM: 8 GB

  Hi thanks for the prompt response, but I think I solved it. Initially it was not booting from the ISO USB image so I created a DVD with the same image that seems to start but game then me this error. I changed the boot sequence to start with USB flash and now is to install windows...

• Ghost images between cuts to export after the edition of interlaced images

  Hello

  When I change a few sequences in the order that are defined to be interlaced and I do some changes specific to the source, I find myself with a few images of 'ghosts' arise between cuts in export. However these ghost images are visible only in vlc and other external drives. If I import export in PP, there will be no ghost image to be seen.

  Here is the link to an example: http://www.doublesens.tv/media/05A-SONORE%20GUINEE_1.mp4

  And a screenshot of him:

  

  I tried export ff upper, lower, gradual changes, nothing. I tried also to manually select the progressive in the "film" for the source dialog box. Nope.

  The only thing that works is the edition of progressive sequences, even when the material is interlaced.

  Looks like a bug. What do you think? What I lose something when I change in a progressive sequence with interlaced source and export?

  Thank you very much.

  vilrockerdefer wrote:

  ... these ghost images are visible in vlc and other external drives. If I import export in PP, there will be no ghost image to be seen.

  If you change in an interlaced sequence, the program monitor is set to display two fields?

  

  If you use the interlaced source material and mounted on an interlaced timeline, must match the domination of the field in the source and chronology.

  In addition, the source of the layer footage has been copied (from the band, for example) or is it original camera film? I've seen cases where interlaced images has been incorrectly dubbed and this problem - the cutoff point showing the scene of outgoing on the ground one and the incoming field scene two of the frame - has occurred.

  If this is the case, the only solution is to drag edit them points.

  MtD

• trying to install from the disc image on the new macbook pro, I get a' configuration error: 6

  Hello, I created a disk image that includes an installed version of Adobe CS5, trying to install from the disc image on the new macbook pro, I get a' configuration error: 6 ". Is it possible to correct the error and install cs5?

  Thank you

  Dominique

  Adobe applications must be installed using files of facilities.  Uninstall, use the cleaning tool, and then reinstall.  If you need a download link is provided below.

  Adobe Creative Suite cleanup tool

  helps resolve installation for CS3 thru CS6 and creative cloud problems

  http://www.Adobe.com/support/contact/cscleanertool.html

  CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

  Quickly find your serial number

• I just paid almost $10 to create a PDF from a jpg file, but I did it so that I can change it. Now I find that I needed another Adobe package that would create the pdf AND I would change it. What should I do now?

  I just paid almost $10 to create a PDF from a jpg file, but I did it so that I can change it. Now I find that I needed another Adobe package that would create the pdf AND I would change it. What should I do now?

  If you create a PDF file from an image, it is always a picture, and you cannot change it.

  If the image contains text, then you need to perform the text recognition (OCR) before you can actually change the text.  Acrobat can do that.

• Retrieve messages from a system image

  As a result of a system crash my PC could not recover from a system image. I need to retrieve my emails. I think I found them in the image of the system but they are in a file named Inbox but the file has no file extension. Is there a way to recover them or read them at least?

  next time allows you to import the https://addons.mozilla.org/en-US/thunderbird/addon/importexporttools/ file.