Creating cloud Nightmare - cannot run Photoshop CS6 / impossible to install Photoshop CS6 - Win 7 64 bit

Similar Questions

• Impossible to install CS4 in 8 to 64-bit windows machine

  Impossible to install CS4 in 8 to 64-bit windows machine

  After pressing the installer... it starts to scan the system and encounters an error that prevents the procedure

  I m trying to install CS4...

  See http://helpx.adobe.com/creative-suite/kb/troubleshoot-installation-install-logs-cs3.html

• Profile of supported lenses does not appear in the last subscription create Cloud for Lightroom and Photoshop.

  Hello

  I find it extremely frustrating. According to the last creative cloud Lightroom and versions of PhotoShop, what I use, namely F/2.8 Di VC USD A009E lenses from Tamron SP 24-70 mm F/2.8 Di VC USD A007N and TAMRON SP 70-200 mm are supported but when I load a photo RAW using these lenses and activate profile correction It is not found. If I choose it manually, it is still not found!  What I am doing wrong?

  I have a camera Nikon D750, and even that is not in the list. It seems that my lens profile database is obsolete. But how is this possible if I downloaded the last subscription create clouds?

  I also have a Samyang 14 mm F/2.8 lens. Not sure if this is taken care of. If someone could point me in the right place it would be greatly appreciated.

  Thank you.

  Hello

  Profiles of lenses are applied to raw files when the option is enabled. You can see the image that the Lens Correction is enabled or disabled.

  The Tamron will be there, the Samyang I don't know - check by flipping the switch on and outside, it will become quickly apparent.

  The list is for JPEG and TIFF files and does not apply to raw files, so don't worry.

• Problem creating test instance, cannot run processSetup for configuration: cannot run createHOMObj for configuration: No. GuestOS appearing in the XML file

  I got following error when running tests on the Workbench 2.1

  
  

  [February 19, 2014 16:27:10: TRANSPORT] [0] FRAME: Async command is monitored by the process of STAF 73

  [February 19, 2014 16:27:10: FACTORYIMP] SETTING [0]: insert in the container

  [February 19, 2014 16:27:10: TESTHASH] [0] INFO: VirtualMachine installation process

  [February 19, 2014 16:27:10: VIRTUALMAC] [0] FRAMEWORK: the Setup() method called

  [February 19, 2014 16:27:10: STAFBASE] SETTING [0]: command execution STAF: staf VTAF_VM localhost connect password of administrator agent 192.168.8.158 userid: 11:Infocore' 1 q ssl

  [February 19, 2014 16:27:10: STAFBASE] [0] FRAME: command execution STAF: staf localhost VTAF_VM getvms anchor 192.168.8.158:administrator

  [February 19, 2014 16:27:11: MULTITECH] [0] FRAME: called VTAF::TestLib:Sphere:Lib:STAFSDK:HostSystem:GetAllVMs (HostName = '192.168.8.150' password = 'infocore"username ="root") returned UNDEF

  [February 19, 2014 16:27:11: VIRTUALMAC] [0] FRAMEWORK: new creation vaaivm1-150 VM from scratch...

  [February 19, 2014 16:27:11: TESTHASH] [0] ERROR: cannot run processSetup for configuration: cannot run createHOMObj for configuration: No. GuestOS appearing in the XML file

  [February 19, 2014 16:27:11: TESTHASH] WARN [0]: found objects that need to be cleaned

  [February 19, 2014 16:27:11: VIRTUALMAC] [0] INFO: cleaning of the virtual machine: vaaivm1-150

  [February 19, 2014 16:27:11: HOSTSYSTEM] [0] FRAME: HostSystem Cleanup() called

  [February 19, 2014 16:27:11: HOSTSYSTEM] [0] FRAMEWORK: the location of the swapfile to the directory of the VM on the host 192.168.8.150 restoration VM...

  [February 19, 2014 16:27:11: HOSTSYSTEM] SETTING [0]: setting VM Swapfile location to use the directory of the virtual machine

  [February 19, 2014 16:27:11: STAFBASE] SETTING [0]: command execution STAF: staf VTAF_Host localhost connect password of administrator agent 192.168.8.158 userid: 11:Infocore' 1 q ssl

  [February 19, 2014 16:27:11: STAFBASE] [0] FRAME: command execution STAF: staf localhost VTAF_Host setswapfilelocation anchor 192.168.8.158:administrator host 192.168.8.150

  [February 19, 2014 16:27:31: MULTITECH] [0] FRAME: called VTAF::TestLib:Sphere:Lib:STAFSDK:HostSystem:SetSwapFileLocation (HostName = '192.168.8.150' password = 'infocore"username ="root") '1' returned

  [February 19, 2014 16:27:31: HOSTSYSTEM] [0] FRAME: destruction of object 192.168.8.150...

  [February 19, 2014 16:27:31: LOGMANAGEM] COMMENTS [0]: recovery log file 192.168.8.150 host vmkernel.log

  [February 19, 2014 16:27:31: FILEUTILIT] [0] FRAME: PutTmpDirectory - called for destination host localhost

  The same problem was sloved.

  Re: Hardware Certification-do can not find the storage50info.txt file to...

• Cannot run Photoshop, tells me I've reached the limit of Comp 2

  I have installed on two computers Adobe Photshop, now on one of them, I am unable to run Photoshop and get a message telling me that I've reached the limit of two computers and it no longer works and you request an activation code.

  The thing is that it is only installed on these two computers and not any other, could my account have been hacked and installed by someone else? It is a way of "withdrawal" of activation on a remote computer, or at least identify which computers it is installed?

  Thank you

  Hi ubali,.

  Welcome to the community!

  Please contact our Adobe support and they will help you with the activation, check the information of contact here: http://www.adobe.com/support/download-install/supportinfo/

  -Pierre

• Cannot run Photoshop Elements 15

  I just bought ss15 yesterday and installed it successfully (64-bit) but when I try to run it, it just idling. Task lies in the Task Manager.

  I followed some suggestions on this thread and nothing worked:

  Does Photoshop elements 13 Editor

  I tried to contact cat but they refused to help me.

  If I can't get this 'new' software work soon, I'm going to request a refund.

  I spoke with another representative of cat who managed to solve my problem. It was a problem with my Microsoft Visual C++ files that need to be repaired.

• creating cloud acquistata oggi anche photoshop lightroom cc e contains?

  Con Oggi ho labor-intensive cloud creative fotografia e sapere se price even nel prezzo e I wanted

  photoshop lightroom e cc Reed.

  Grazie della risposta che mi will be given.

  Fabio

  Creative cloud photography Plan includes Lightroom and Photoshop CC for the office with Lightroom for mobile, Photoshop Mix for mobile, bridge CC, voice of Adobe, Adobe slate and 2 GB of storage

  FAQ: How can I find what is included in each Plan creative cloud?

• Error updating service runs is not impossible to install Windows update

  Original title: Windows Update

  Windows Update may not work because the update service is not running.

  There is no error message for this error number.

  Hello

  1 did you last modified the software on your computer?

  2. do you get the message that Windows update service does not work?

  3 have you tried to start the service?

  Method 1:

  I suggest you to view update history to see which update are not installed.

  (a) open Windows Update by clicking Start , all programs, and then Windows Update.

  (b) in the left pane, click view update history.

  c c)) to display more information about an update, double-click it.

  Once you know Update KB number then visit the Microsoft Download and put the number in the search box, download and install the update manually.

  Method 2:

  I also suggest you go through the steps and also run the FIXIT automated from the link below.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 3:

  If the methods do not help, I would say that you follow the steps mentioned below and try to start the Windows update services.

  Check if the following services are running.

  Background Intelligent Transfer Service

  Cryptographic services

  Windows Update

  a. Click Start, type "services.msc" (without the quotes) and press enter.

  b. double-click the service name in the list of Services.

  c. under the general tab, next to Startup type, make sure that Automatic is selected.

  d. If the service is not already running, under Service status, click Startand then click OK.

  e. install the updates and check.

  Hope this information was useful and keep us informed.

• Impossible to install iTunes on Windows 10 (64-bit)

  If all this started because I had problems of synchronization via USB cable. "Connection" would be constantly. I tried different cables, different ports, nothing worked and the next tip was to reinstall iTunes. But then iTunes has never really disappeared and when he relocated, nothing was different. So I started researching... and removed everything according to the instructions here: troubleshooting issues with iTunes for Windows updates

  During troubleshooting, I did it by using the windows control panel and an app called Total Uninstall. I also used CCleaner after uninstalling. All this and I still can't get iTunes to install. If I use the generic version of the Web site, I get the following error:

  "A later version of Apple Application Services (64-bit) is already installed."

  Of course, it is not installed. It does not appear in the Panel, Total Uninstall, or in the Windows Installer Clean up App, I've seen suggested elsewhere.

  OK, while I've read about this version of iTunes for "older video card" that is supposed to work with Windows 64-bit 10. I downloaded that. Uninstalled everything that was there, once again (in order). Restarted. Ran as administrator - but he gets to "starting services" bombs and then restores. It installs AAS, Hello and Apple update. If the internet tells me that there is a problem with Apple Mobile Device Services. I unpacked the installer, tried just to install the amendments and get:

  "A later version of the Apple Mobile Device service is already installed"

  Alert to despoil: it is not. There is no services with the word "Apple" running at all on the machine. There is no folder in Program Files or Program Files (x 86) under common files.

  I'm completely stuck. I have uninstalled/reinstalled the so many things so many times and so many tools, I don't know where to go next. I'm about to use a wipe completely formatted HD and the new installation of Windows, but I bet that iTunes has found a way to bury itself in the diet so that even this will not provide a clean slate.

  Any ideas on what I can do given what has already been attempted?

  Thank you!

  Running the Microsoft install and uninstall utility mentioned in note 1 below the second box from the tip of the user.

  TT2

• Impossible to install KB2931354 on Windows Vista 32-bit SP2

  Done through Windows Update, it fails with the error code 80070027.  In fact with the patch downloaded Windows6. 0-KB2931354-x 86.msu, it fails with "the following updates were not installed: update security for Windows (KB980842).

  To resolve this problem, I tried:

  Resolutions in https://support.microsoft.com/en-us/kb/883825

  Method 1 - restart.

  Method 2 - Start the computer in safe mode with networking support. This computer is connected to a network (do not use a modem) and Windows Update does not load in safe mode with networking support.

  Method 3 - perform a clean boot the computer, and then install the update.

  Method 4 - temporarily disable spyware and antivirus software.

  Method 5 - temporarily disable firewalls.

  Resolutions in https://support.microsoft.com/en-ca/kb/971058

  Method 1 - automatically reset the Windows Update components with the download of Microsoft Fixit.  I ran it several times until all problem areas shows a checkmark as being corrected.

  Method 2 - manually reset the Windows Update components.  All steps have been completed successfully, with the exception of the appidsvc to stop (step 2 - error was that the service did not exist), registration dll (step 6) and install the latest Windows (c:\windows\system32\wuaueng.dll) Update Agent (step 11 - no standalone download, it does not exist for Vista but c:\windows\system32\wuaueng.dll is the latest version - 7.6.7600.256).

  Upon registration of the dll, a long list could not be saved.  Browseui.dll qmgr.dll and mshtml.dll, shdocvw.dll failed with the error 'the module was loaded but the entry point DllRegisterServer was not found' and msxml.dll, gpkcsp.dll, sccbase.dll, slbcsp.dll, initpki.dll, wuaueng1.dll, c:\windows\system32\dllcache\wucltui.dll, wuweb.dll, c:\windows\system32\muweb.dll, failed with the error "failed to load module.

  Resolutions in http://answers.microsoft.com/en-us/windows/forum/windows_vista-update/cannot-install-some-windows-updates-error-code/328ab424-a5cf-47bd-9c7d-fcaa942d7631

  Method 1 - Download and install the updates manually.

  Method 2 - remove earlier versions of the .NET Framework and then install all versions of the .NET Framework.

  Due to the KB980842 error when you try to patch manually, I also tried to look to the top of this Knowledge Base article.  He referenced KB982533 - who had a patch.  When I tried to apply the Windows6 file. 0-KB982533-x 86.msu, the error was "this update does not apply to your system.

  I also applied Windows6. 0-KB947821-v35-x 86.msu (System for Windows Vista Update Readiness Tool).  That has been recommended as a possible solution in one of the pages on the repair of Windows Update - I do not remember now that one.

  At this point, Google and me are ideas.

  Solved by formatting and reinstalling Windows Vista.

• Impossible to install Java64 on Windows 7 64-bit

  I tried everything to remove from the latest updates, MS FixIt, CCleaner, uninstall the 2 times of all THE Java, redownloading configurations (online and offline) and nothing is working I just get this

  https://gyazo.com/dce6519dcb89f9ccd48a72d4ac4d1248

  (1) run chkdsk as follows:

  A prompt by right clicking and select "Run as Administrator" and then at the command prompt, type: chkdsk /f r, then press the Enter key.

  If you are asked to plan the volume to check the next time that the system/PC reboots, enter: y

  Now, restart the PC.

  Keep an eye on the screen and watch to see if errors are reported.

  If you know the manufacturing of your hard drive you can also download their diagnostic software.

  Check the health of you drive using CrystalDiskInfo:

  http://CrystalMark.info/software/index-e.html

  User Manual: http://crystalmark.info/software/CrystalDiskInfo/manual-en/

  Monitors the health status of hard drive (HHD and SSD) (SMART values) and the temperature. Supports Solid State Drives (county level wear or value of software).

  ==========================================================

  (2) run the command SFC /SCANNOW.

  This will check and repair if necessary all of the critical Windows system files.

  Click on start / all programs/accessories then
  Right-click on the command prompt option and select "Run as Administrator".
  (or "Safe Mode" open a command prompt)
  At the command prompt, enter: SFC/scannow

  Windows 7 - order SCANNOW SFC - System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
  http://support.Microsoft.com/kb/928228

  J W Stuart: http://www.pagestart.com

• Cannot download and install applications on Win 7 64 bit

  I am running Windows 7 Home Premium 64-bit.  I can not successfully download and install all applications using IE 9.  First of all, I get a warning that it is not a common software (even for programs commonly downloaded as Win Zip).  Then when I save it, what is saved is considerably lower that we shouldn't.  When I try to launch the installation software, it tells me that he is not a Win32 application (which is meaningless to me as WinZip is 64-bit compatible).  In this case no matter what I try to download and install.  On the other hand, Windows is able to download and install its own updates.  I saw that another son on this but no answers that were useful, can anyone help?

  I have Norton, but it was turned off.  However, I failed to mention an important detail.  This resulted in Windows 7 run on a virtual machine (Parallels).  I talked to Parallels support and they had me change a setup that seems to have solved the problem.  Thank you for your efforts and sorry for being incomplete in my messages.

• Standard user cannot access program (event id 882) installed on windows 7 home 64 bit.

  It's driving me crazy.  Whenever a user attempts to open a program already installed, nothing happens.  The event viewer displays the event id 882.  The laptop is running windows 7 home so it doesn't have the local security policy that I can change.  How to disable this check or allow the program is accessible by standard users?

  I solved the problem.  I downloaded and installed gpedit.msc following the instructions here - http://www.askvg.com/how-to-enable-group-policy-editor-gpedit-msc-in-windows-7-home-premium-home-basic-and-starter-editions/

  Once this was done, I was able to change the policy to allow the user to access the new application.

• InDesign CS6 (Win 7 64 bit) - palletes does not not on monitor high density

  I have InDesign CS6 for years. Recently, I bought new 27 '' Dell P2715Q monitor with 3840x2160px. I also have a second monitor, the old Dell 2001FP with 1600x1200px which I use only for some pallets.

  No matter if the second monitor is connected or not, almost no pallets are working. I'm not able to click on anything (select font, color, move pages etc.). I can only click on objects on the page and select some tools (not all). Some pallets begin to work if I move from the main screen to the old ('Pages' Panel), but most of them don't work either. For example, I can also choose some shades of color, but some samples do not react even on the old monitor.

  Before, I bought this new monitor, I had two monitors as well, only not high densities. This problem apparently only occurs with the monitor high density. I tried to lower the resolution just to see if that helps, but it has not changed.

  Anyone has any ideas how to solve this problem? I am not able to co-operate at all at the moment, and when I contacted Adobe support, they said "support" for CS6 is only here to the forum user I'm afraid if I bought InDD CC, it will be the same and wasted money.

  Did you change the font size of Windows? See the signs and tools InDesign respond not to the clicks of the mouse (Windows 7/Vista)

• Impossible to install Illustrator on Win 8.1

  I managed to install the creative cloud on my laptop, but when I started the installation for Illustrator, I got the below error. Can anyone help?

  Exit Code: 6 Please see specific errors below for troubleshooting. For example,  ERROR:   -------------------------------------- Summary --------------------------------------  - 0 fatal error(s), 2 error(s)    ----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x86) 11.0.61030.0 {873BE68F-480F-49A6-9649-F98CAB056AFC} -----------  ERROR: Third party payload installer vcredist_x86.exe failed with exit code: -2147024546  ERROR: Failed to install Microsoft Visual C++ 2012 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\deepam\AppData\Local\Temp\{7E13EB7A-117F-49B9-8786-41B4121F5EBC}\Illustrator_18_LS20_win64\Adobe Illustrator CC 2014\payloads\Microsoft VC 2012 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x86) from Microsoft website - www.microsoft.com  ------------------------------------------------------------------------------------- 

  Code 6 & Code 7 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html