How to scan my photosmart 7510 to my macbook?

Similar Questions

• How to scan on photosmart c510 pc

  How to scan on photosmart c510 pc

  Hi HPJohnN,

  Open the Solution Center and make sure you have enable scan to PC.

  

• When I scan documents with HP Photosmart 7510 ADF, how can I stop the pages to be marked?

  Hello

  I use a HP Photosmart 7510 (model No. C311a, product no. CQ877B)

  When I scan documents using the automatic document feeder, they are more often (80%) marked left.  It seems to be caused by the wheel which initially grabs the book.  It provokes a black spot of the width of the wheel to be left on the page.

  The mark appears about a quarter turn to the bottom of the page and is about 1/2 cm in height, but is very sensitive.  Sometimes, another brand is left a little further down the page and sometimes these two brands are accompanied by a very reduced, but still noticeable grey banner (again I believe caused by the wheel).

  The brand is very visible not only on the scanned now but also (of course) in the pdf file that result, and since I'm on this printer for things like job applications, it's not big.

  Other people know about this?  If Yes, is it possible to fix it or must return the defective printer?

  See you soon,.

  silverShnoop

  Hello silverShnoop

  Such problems can sometimes be caused by dirty rollers or the parts of the ADF (automatic document feeder). The following instructions (whereas for a different problem) contain instructions for the cleaning of the AAD.

  The ADF (ADF) captures no paper

  There is another article that could help as well. It contains instructions for cleaning the scanner glass.

  Vertical stripes, lines or streaks in the Copies or Scans

• Can multiple Photosmarts (7510 and C309g) be configured to scan on the same computer?

  I have an Acer PC Windows 7 with an AMD Athlon X II processor, 4 GB of RAM.

  I have Photosmart C309g and everything-each 7510, both connected via wi - fi, using different IP addresses that are not in conflict with other devices on my network.

  I executed the complete installation for both HPs.

  I can print either, but I can scan only using the 7510.

  When I open the HP scan diagnostic, it does recognize that the 7510 - the c309g is not yet listed.

  I noticed only 7510 application record contains a HP scan application and it also recognizes that the 7510.

  There is no application scan c309g folder.  I tried Win 7 Windows Fax and Scan application but that also recognizes as the 7510.

  1. is there a way to configure the system so that it can print and scan from these two Photosmarts?

  2. If the scanning using a 7510 and c309g does not work, could I use a 7510 both a 7520?

  Hello Osiris43,

  Welcome to the HP forums! I understand that you are unable to scan a document using the Photosmart Premium C309.

  You should have two printers scanning capabilities, because they have a different software. The Photosmart printer using the Solution Center and the Photosmart 7510 uses the Printer Wizard.

  I suggest you uninstall/reinstall the software Photosmart Premium C309. Please follow these steps:

  Please follow this HP document uninstalling the software of the printer.

  Then, perform a clean boot on your computer. I'll give you a Microsoft document on this step here.

  Now, install the full features on the site of HP software here. Choose your operating system that is appropriate; 32-bit or 64-bit.

  Once installation is complete, please click on the document to Microsoft, and "how to reset the computer to start normally after a clean boot."

  Please send me your troubleshooting steps.

• Photosmart 7510 stop scan to PC (Windows7). Diagnostics and help have not solved.

  Printer - Photosmart 7510.

  System: I'm on Windows 7 home premium 64-bit, I have Norton 360.  Laptop is Acer Aspire.

  Problem - Photosmart 7510 - scan is no longer to the PC.

  Software won't uninstall (so I can ' t reinstall)

  Connect the printer software installation impossible (he always recognizes the printer on the network)

  Scanner not recognized.  When I click on scan HP he says 7510 series unrecognized.  If I click on manage scans devices/printers, nothing happens apart from hourglass.

  I lived all the online help and scan doctor and spent 3 days on this.  Nothing seems to fix it or repair.

  The scanner, printer and copier what worked first implemented, including scanning to pc.

  Now, everything works apart from scanning to PC.

  A few days later the scanner to the computer stopped working and could not be recognized if clicked (for example to allow the scan to PC function).  Scanner the doctor then tried to uninstall and reinstall the software.  The basic device HP software won't uninstall, whether through the HP program or control panel.  There after the reboot, even when supposedly uninstalled.  I tried to reset the defaults on the printer, turn off the power sector, removing the printer from devices and printers, fixing and cleaning the registry errors, checking all relevant WIA and CPP are restarted and automatic according to the directives of this help: http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/Photosmart-7510-won-t-scan/m-p/1749193/high... I followed all the HP help topics and have tried drivers updated and installation of HP.com.  My laptop was rebooted about 50 times in the last three days trying to get this resolved.

  When I click on the printer defined upward and the software it prompts you to connect the new printer.  It finds my 7510 (wireless), but says that it cannot install it.

  I can't do windows system restore, because there is no set of restore points.  I tried to disable firewall for connections and installation of the software.

  Various error messages appear:

  During the uninstallation using the control panel.

  "Scan to PC Activation App" needs closing (I can only find in the tasks of process manager I then complete the process)

  If I try to use the HP uninstall later said there is no uninstall HP.

  I have the original CD.

  Any ideas as to how my scan to PC to work again?

  Maybe this isn't the case in your situation, however, security software (firewall/anti-anti-virus/malware) can cause endless problems, depending on their configuration. Norton 360 is an extremely invasive program, part of what makes it so effective. But, get the settings to allow access install/uninstall the devices through 360 can be complicated. My advice before you try anything else, would be to disable Norton 360 (gives you regular intervals) then try Solution 3 in the Windows 7 of this troubleshooting document installation section:

  http://goo.GL/Qtbcf

• Scanning Photosmart 7510 problem

  My Photosmart 7510 worked fine for six months or so I've owned it. Recently however, my laptop stopped recognizing the 7510 scanner, although the impression was very good. After having tried in vain a few things, I deleted all the driver from HP and other software and it reinstalled from the CD, but the problem persisted. I worked through the guide installation failure MSI 1603 HP, including downloading of new versions of drivers and other software, and everything has worked fine until it is returned to normal startup in msconfig and restarted the laptop, how the scanner is not found again.

  I run Windows 7 and connect with the wireless printer.

  I guess that something in the startup is interfering with the communication scanner, resulting perhaps an update from Microsoft.

  Any help would be appreciated.

  Welcome to the Forums of HP Chris170,

  I see by your post that the scan has stopped working. To turn off the startup items, it started working again.
  I can help you with this problem.

  The cause would be a program that runs in the background.

  Try with the Antivirus Scanning software off to remove the cause.

  Then you can go into the msconfig for Startup tab and just activate a few elements at a time and try to scan the image. In this way, you can leave the problem not controlled. But your time will help.

  For my part, I turn off everything but my Antivirus software in the msconfig. Speeds up the computer also.

  If you need help, let me know.

  Good day!
  Thank you.

• Toshiba Satellite C55-B5362: how to scan multiple pages in a 1 paper for printer HP Photosmart 6520?

  I use Windows on a Toshiba Satellite C55 B5362, 64-bit version 8.1 and have printer HP Photosmart 6520.  This is a new printer for me.  I have scanned multiple documents to discover that they were recorded on the computer individually instead in a single document.   How to scan multiple pages in 1 document?

  Thanks for any help!  Please let me know if any additional information would be helpful in order to answer you.

  Hello dru98,

  Please click HERE to access the procedure which should solve the problem.

  PS: Expand ""How to scan with HP software " and"How to scan an original of several page into one file " "

• How to scan multiple pages with Photosmart 6510?

  Hello

  I am a new user of all-in one Photosmart 6510. Does anyone know how to scan multiple pages into a single document?

  Thank you!

  It is important to note that there is a limit to the DPI affecting as well. It seems that you cannot scan a document multiple pages when you set the resolution 600 or higher.

• HP Photosmart 7510 not scan to computer (MacBook Air)

  Hello

  I have a HP Photosmart 7510 connected wireless to my home network and I can't select my computer when parsing the list for the computer on the printer.

  I use a MacBook Air with OS X 10.8.2

  I've updated all my drivers, reinstalled the software and disconnected/reconnected to the network several times.

  I can print to the 7510 my computer.

  I can scan the 7510 using the HP software on my computer

  I am unable to find 'activate Scan to Computer' in the settings on my computer (and all instructions on this Web site are for Windows)

  We organize also several computers window on our network, and these show all in the analysis of computer selection and can be analyzed successfully to. (without going through the HP software installed!)

  What is missing for me to scan to my computer? Scan to other computers is not an option (for reasons of confidentiality) and scanning the computer is also not ideal, because I bought the printer for the analysis of it infrastructure.

  Thank you

  Emma

  Hi Emma,

  If the Scan of the computer does not appear under the HP utility, more liekly something went wrong in the HP installation wizard.

  Try these steps and let me know if that can help you:

  First reset the system as follows:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Select Print & Scan.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Then, go to Applications\Hewlett - Packard\Device Utilities and follow the HP installation wizard.

  Now open the HP Utilitiy and search the computer Scan in the scan parameters section.

  Kind regards

  Shlomi

• How to scan to PDF? I have the HP Photosmart c4680 printer and m7-1015dx Pavilion computer.

  How to scan in pdf format. I have printer hp photosmart C4680 & pc hp Pavilion m7-1015dx Entertainment, using the Windows 7 operating system.

  The computer only allows me to scan all the documents in for example jpeg photo format. My old computer has a program called HP solution center this permit scan me to PDF.  The new configuration of hp can only scan to the size of the photo. How can I fix it, so can scan documents to pdf format?

  Hi, you probably need "Full Feature software and Derivers" at the following link: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=au&dlc=en&sw_lang=&product=3739150#N193 if still does not work. Please try to download and install for free a product called PDF24. You can open this program and import from a scanner, you can also use this program to edit the scanned or as pdf documents. Here is the link to download: http://en.pdf24.org/pdf-editor.jsp best regards.

• How can I make a T-Shirt on a HP Photosmart 7510 transfer?

  How can I make a T-Shirt on a HP Photosmart 7510 transfer? I have a MacBook Pro and I am trying to print from Word.

  IF the printing software will not spill the content and that you use MS Word, you can insert a text box into the page. A text box can be made to almost the entire page size by larger margins in the print options.

  To return the text box as a mirror image in Word (after content is added):

  1. Right-click the text box and choose Format shape.
  2. In the left pane, choose 3D Rotation.
  3. Set the X to 180, and click OK.

  Personally, I have better results/control using Photoshop.

  I do not know alternatives to use Mac because I'm not a Mac user.

• Photosmart 7510 will not scan. Print, fax, Eprint, everything works, but not software for scanning

  I spent over 10 hours on the phone with Technical Support, Cloud Computing service and an escalation of HP handler.  The escalation of HP Manager ran a cleaner tool to remove completely all HP printer software and reinstalled.  Now, everything works except for analysis.

  Using the utility to scan the PC gives HP, "the series of HP Photosmart 7510 was not found"

  Using Scan of the computer for the printer display gives, "make sure that the HP printer software is installed.  I can, however, scan-to-one chip memory inserted in the computer, but is produces a jpg file and I need PDF.  All scanning software worked before technical support and escalation of HP is involved.

  Hi Bob,

  I discovered that Windows has made a number of updates to security on my computer.  Therefore, windows do not see the 7510 as a device scan and judged that he was a suspect and deactivated engine part analysis of the HP software.

  Reinstall the printer as a wireless printer, and then by reactivating the printer to scan, my HP software came back and now everything works as advertised.

  I think you were on the right track.  Then analysis stops on an HP printer without apparent reason, check if there's any recent Windows updates.  If so, reinstall the printer as a new wireless printer.

  Thanks for your comments!

• How to scan color PDF with Photosmart 6520

  How to scan color PDF with the Photosmart 6520? They only appear on my Mac in black and white and I don't see any option to specify the color on the device.

  Hello
  The workflow default scanning set up to scan documents in black and white. Be sure to change the settings for scanning to scan color documents:

  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab scan tasks.
  4. Select the affected shortcut and click on change... (or double-click on the shortcut).
  5. in the section of scanning from an HP device, click the blue triangle or button view details to expand the menu.
  6. in the expanded menu now, open the drop-down next to the Mode
  7. now select the color option, and then click OK to save the changes. The next scanned using this workflow is displayed in color.

  Kind regards
  Shlomi

• Language of LCD on photosmart 7510 is wrong how can I change

  The language on the LCD screen on my Photosmart 7510 - English, in Chinese characters, how can I change this back?  I can't read it so you'll have to explain by saying (1st, 2nd etc.) button to push.

  Hello

  Please try:

  • Tap the screen to the top right, to the next first
  • Press the top row, to the next screen
  • Again, press the row from the top to the next screen

  You should see (row top again) English. Now contact English

  Kind regards.

• How to access server dns on a photosmart 7510 address to set the address of my router?

  My father has just got a photosmart 7510.  I have a trendnet wireless router, which has a few computers connected wirelessly.  To get these to connect, I had to modify the IPv4 settings to set the default gateway and dns server addresses main address of my router. On the printer, I can find where to enter the default gateway, but NOT the primary dns server.  Printing of network configuration settings shows the dns backend as 0.0.0.0, as is the case, the router gave the printer MAC address, but they cannot talk to each other on IP and of setting up the PC on the network, I know that it won't work correctly together w/that.

  Where in the printer configuration menus this value is located so I can put it?

  Oh, OK.  We should perhaps solve the problem of connection to the router, get the printer connected to it with a DHCP address, then go to the printer web page and tweak it.

  -Reboot the router by removing the power momentarily.

  -Change the channel to 11 router and make sure that you use WPA or WPA2

  -On the printer to go wireless > restore network keybord.

  -In the same network menu, run the Wireless Setup Wizard.

  The printer must be connected to the router, then you should be able to access it via its IP address.