Creating cloud on different operating systems

Similar Questions

• How can I get rid of windows 7 without deleting it and istalling a different operating system?

  How can I get rid of windows 7 without deleting it and istalling a different operating system?  I remember on xp, I couldn't allow him to function as a windows 95 or 98, if I wanted to.  I just want my computer works like windows xp.

  So can YER a little confused you explain a little better please.

  OR

  do you mean get W7 to resemble the way XP worked?

  In this case (start base fast and simple):

  • try to set a theme for a basic/classic theme - more like 98 then XP well.
  • Download (AV Control) and then use "classic shell" - menu style old XP.
  • Ditto for "explore classic" mentioned on this site.
  • Set the control panel to use the icons (small or large) as opposed to categories.

  But its still W7 in disguise.

  Is that the sort of thing you mean?

  If so, personally, I think its better to stick with W7 and get used to. I bet you will love windows 8 :)

• Additional license for different operating system?

  I have Lightroom 5.7 on my home PC, running Windows 7. I intend to get a small laptop for travel, maybe a Macbook Air. I have to pay for another license for the different operating system?

  If you have only 1 installation, you don't need a separate license. If I remember correctly 1 license should support 2 computers, a laptop and a desktop computer with different operating systems.

• have 2 hard drives with different operating systems on them

  I'm upgrading. I took a hard drive from another pc. It has windows vista on it. Am using another hard drive with XP on it as a slave. But it does not recognize 2nd hard drive other than a shortcut that my friend created. I think it has to do with group policies in Vista? Or the 2 operating systems will not play nice with them? I can't reformat the drive until I get back to the top on them.

  Finally, I plan to each drive to reformat, but want to back up each drive, so I can't reformat now

  Do you not normally take a hard drive with an installed operating system, on a single computer and put it in another for a start of it.

  You can ask yourself all sorts of problems.

  Motherboard drivers are involved for each computer, they are installed.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And there are rules of licensing:

  If your computer is pre-installed with Vista or if it was an OEM drive, that you bought, it is classified as an OEM license and is not transferable.

  The license of Vista OEM is related to the original computer it is installed on and dies with the computer.
  You cannot transfer it to another computer/laptop

  If a license of Vista at retail, you can transfer it to another computer/laptop.
  But it can only be installed on one computer at a time.

  .

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  There are a set of processes for dual-boot Vista and XP, if that's what you try to do.

  You will need to follow the link below:

  http://www.syschat.com/dual-boot-Vista-XP-Vista-already-1946.html

  If you mean something different from your message, try the Forum relating to data recovery Vista repair:

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/threads

  Restore the previous settings, repair installations, recover data in.

  See you soon.

  Mick Murphy - Microsoft partner

• APPS of R12 and DB on different operating systems

  Hello
  
  I got a question if it were possible to have the R12 request on the database and windows on linux.
  
  I know to install pre - req is that all nodes have the same operating system, but the above configuration as possible.
  
  
  Kind regards

  user10243788 wrote:
  Hello

  I got a question if it were possible to have the R12 request on the database and windows on linux.

  Yes, it is possible.

  I know to install pre - req is that all nodes have the same operating system, but the above configuration as possible.

  Kind regards

  For installation, there are a few pre - req, but can have different OS.

  Please see
  https://blogs.Oracle.com/stevenChan/entry/mixed_platform_architectures_f

  Thank you

• Install Apps on HDs Ext with different operating systems

  HI -.

  What is the process for installation across multiple operating systems multiple ext HDS connected to a computer?

  I have several external hard drives with a Mac OS different on each connected to my Mac desktop to emulate environments with my clients.  My internal HD is running 10.7.5, and I have a 2 TB with Mountain Lion installed external HD.  I would like to know how to install the Adobe applications in each environment.  Because I can never run multiple instances of the operating system at the same time, I can't be in violation of the EULA, ergo I think I should be able to install Adobe software on any of these HDs ext with only one license.

  Thank you.

  KirkibusMaximus

  Post edited by: KirkibusMaximus

  You can install a million times until you bleed your ears, but you can never activate 2 installs with a single license. Do not hesitate to turn on and off according to your needs.

  Mylenium

• File generated with utl_file with the owner of the different operating system.

  Hello
  I'm trying to generate a file with utl_file for a procedure with the other proprietary operating system. When I call sqlplus procedure, the file has oracle and oinstall group as the owner. I create another user of the os and I want to when I call the procedure for this user to have this new user as the owner.
  I put this procedure in cron and the file have new user as long as owner, but when I call this procedure from sqlplus, the generated file have os oracle as the owner user.
  What I can do.
  Thanks in advance.
  
  Published by: danut68 on October 1st, 2009 04:17

  because the task has a manual task of change-the-owner after you have created the file?

  Maybe this link will prove of some help: http://forums13.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1254397858882+28353475&threadId=524589

  In regard to "special request"... why? What is the reason for your PM wanting to make this special request?

• Can I run exe files in different operating system on the same machine, HP Envy dv7 dual OS

  Hello

  I have instaled Windows 8.1 on my drive C: and Windows 7 on my E: drive. Is it possible to run executable files with Win7 (like games), which are installed on my Win8.1.

  Thank you in advance...

  

  "You mess with the best, die like the rest!

  Hello

  No, when 2 or more operating systems on a construction machine means logically divide the machine at 2 or to several machines and we do not want a VM to interfere with the other virtual machine (s) (in short, we don't want a mess) and each operating system runs on its border.

  Kind regards.

• charging on different operating systems problem

  Hello

  Since this is my first post, I'll say this first: I love my 4 GB Sansa Clip!

  I had a strange problem, however, and a quick look through the forums has not enlightened yet, although I apologize if it's already been processed somewhere I use my Clip in MSC mode exclusively (DPW was just too odd and flaky). To make it work fine on Windows XP, Mac OS X Tiger and Ubuntu Linux 9.04. Windows is on my main computer, and several months ago the Clip stopped being recognized. In fact, when I plugged into the computer, it come alive and say it is 'connected', but it would not charge and it would not appear as a device in Windows. So I tried it on my Mac mini, and it worked fine. So I used it on my Mac mini since then, but tonight, the same thing happened there: I plugged into it, he said 'connected', but not charged and could not climb. I'm so back to my Windows machine thinking maybe the moody aircraft was begging for some MS action tonight, but no luck. So I restarted in my distro Ubuntu (9.04 v and guess what?) Fortunately, it is charging as I type and he fitted immediately and allowed me to transfer files via.

  So, what gives? Why would it matter what operating system tries to mount? It is a complete mystery to me, and I wonder how long I could have before even Linux stops recognize it...

  Anyone else encounter this? Thanks in advance!

  I can't speak for your Mac problem, but sometimes the Windows can have a brainfart and corrupt the USB driver. Go in with the connected player Device Manager and look for a faulty device (indicated by a triangle-and-yellow exclamation icon) in the tree view of the devices Universal Serial Bus controllers section. Delete any you find, disconnect the drive and restart your PC. Once Windows has finished loading, reconnect the video and Windows should detect and reinstall the driver.

• try to set up a home network with two different operating systems.

  My mother has a desktop in Vista and two laptop computers, 1 on Vista and XP 1. the office is connected to the internet and has a wireless modem. the two laptops are wireless connections and both can connect to the internet using the wireless. The printer is connected to the desktop computer and file/printer sharing enabled. I can't connect to a home network.

  Home both my desktop and my laptop are Windows 7 and both are connected to the home network and I can share my printer. I can't seem to find the right/instructions buttons to connect his and do his work. Any suggestions?

  I tried to run the tutorial "set up a home network" and solve problems, but since they are different versions that the buttons are not in the same place and are marked differently.

  Hello

  This"the desktop computer is connected to the internet and a wireless modem" , is not clear.

  To have a coherent network, the Modem is connected to the network, the router must be connected next Modem WAN, and the wire from the computer or the wireless must be connected to the router.

  -------------------

  In general.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  ------------------------------

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Two different operating systems on the same hard disk.

  I have an Acer PC with windows 7 installed. Under 'Computer' it shows the C drive and D drive. I want to load Windows XP on drive D. Someone at - it advice on how I would go to this topic? Checking on some of the forums, he mentions that Windows XP must be loaded first on the C drive which I guess means having to remove windows 7 first? (Then re-load on drive D) Any help is appreciated.

  Dual boot Windows 7 and XP with Windows 7 installed first (method #2), you can:

  http://www.SevenForums.com/tutorials/8057-dual-boot-installation-Windows-7-XP.html

  Note: If your D: drive is the recovery drive you must not touch anything.

  Before changing the computer, create the installation discs for Windows 7:

  Acer - create recovery discs:

  http://Acer.custhelp.com/app/answers/detail/A_ID/12866/kW/recovery%20disk

  If this is a new computer, there no drivers for the older Windows system, meaning that it will not work properly.  First, you will need to check with the manufacturer of the computer, if they have XP drivers for your computer.

  Next, you will need to use an available XP license you have, or buy a new and install on your computer. Insert the disc to install in the computer, restart, and then start the installation. During the installation process, you can format the Windows 7 partition and then continue with the installation of Windows. You will need to back up your files and reinstall all your programs.

  You cannot use a Windows 7 key to activate XP.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• I have Ubuntu linux on my PC set, I can't download creative cloud on this operating system, you have all slove for this problem?

  problem about to download creative cloud

  Hello

  Unfortunately the creative cloud is not compatible with Ubuntu / Linux.

  Please see the system requirements for the same:

  System requirements | Adobe Creative Cloud

  Hope this helps!

• Create the recovery disk - operating system developed at level

  When I got to my x 201, I got Win 7 Home and I created the recovery disks. I then upgraded to Windows 7 Professional and I tried to create the new recovery but message says system recovery cannot be created only once.

  I can create the new collection to reflect the Win7Pro?

  Thank you very much for the help.

  pit says:

  I can create the new collection to reflect the Win7Pro?

  Thank you very much for the help.

  Hello, ditch,

• HP 932C PRINTER DOES NOT WORK ON A NETWORK WITH TWO DIFFERENT OPERATING SYSTEMS.

  I have a 932C HP printer connected via USB to a desktop Windows XP (Dell E520), which is part of a home network.
  I also have a HP Pavilion dv5 notebook, running Windows Vista Home Premium 64 - bit, connected to the same network. This book can find the printer on the network. However, when I try to capture the 932C printer, the following dialog box appears:
  "The printer"hp deskjet 930C series"server has not the printer driver installed. If you want to find the right driver, click OK. Otherwise, click Cancel and contact your network administrator or the OEM equipmente for the printer driver. »
  When I click OK, another dialog box appears:
  «The file ' *.» INF' we (unknown) is needed. Type the path where the file is located, and then click OK. »
  However, I can't find any feasible *.inf file in laptop HP hard drive (both partitions).
  I tried to download the driver from the HP website, but it says that Windows Vista already has the driver for this printer! Well, now I'm stuck!
  I want to emphasize that the printer works fine if I connect it directly to the USB port on the HP laptop. But I want to use the printer via the network, keep it hooked to the Windows XP desktop.
  How to solve this problem? Thank you.

  There is a post where a user got it works with another printer. I'll link below then you can try the solution here. Let me know what happens.
  
  Share the printer for 64 bit with 32-bit system

• Satellite A30-203 freezes during installation of a different operating system

  Hello

  I tried to install Windows XP Professional on my laptop.
  It came with a pre-installed version of XP Home Addition.

  I tried many CD, Windows 2000 Pro, Windows XP Home, Windows XP Pro, but every time that I boot on this CD, the screen n gel 'instilation Windows is putting on' manage to get the menu section.

  I've also tried 2 other drives with the same CD, and they always give the same results as before.

  It would be a great help if someone could advise me more.

  Kind regards
  Al

  Hello

  I think that the on pre-installed home version of Sp1.
  If the installation cannot be performed with different OS, so in my opinion however, something wrong with the hardware.

  It s very strange what happens on two different HDD so I don't think the HARD drive is damaged. Maybe the dysfunction of memory?
  I put t know exactly why this happens, but you can try to remove a module, and check if it happens again.