Satellite L300 PSLBGE Vista 64bits - WLan disconnects at random times

Hey,.

I recently bought a Toshiba Satellite L300 (PSLBGE series) computer laptop. It has 4 GB of RAM, so I installed Windows Vista Ultimate 64 on that.

Problem is that on the Toshiba site there are only drivers Vista32 and with those that I found online, the wireless adapter works, but it keeps disconnecting at random times. It works fine until it stops randomly, there is no message "Network cable" unplugged

He let go the IP address but I tried to keep a 'ping t' on and it gives "the request exceeded" for a period of time and then it comes back.

What should I do?
Thank you

Hello

First of all, it would be interesting to know what you have exactly the WLan card.

I know you could use some WLan drivers from this Toshiba WLan page:
http://APS2.toshiba-tro.de/WLAN/

In addition, I recommend turning off some options that affect the WLan in energy saving feature.

First turn off in energy-saving WLan card properties. (device-> card Manager WLan-> properties-> energy saving)
Then check the power options of Vista-> wireless adapter settings > power save Mode

Here this Toshiba doc could be useful for finding these settings:
http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

Finally and above all the Advanced tab in-WLan card-> properties > Device Manager contains some useful WLan settings that might increase WLan performance

Welcome them

Tags: Toshiba

Similar Questions

  • Satellite L300 & Windows Vista aren't grateful Ipod

    Hi, I hope you can help! I was directed here by Microsoft & Apple - here is my question and also Microsofts response:

    I have an ipod nano 3rd generation, work outside the home a near new laptop with windows vista. iTunes is the entire installation, no problems with the ipod at all but when I plug the ipod in, it only charges the ipod.

    computer doesn't recognize any, the ipod under windows or itunes. It there is no portable device driver in Device Manager, or anywhere at all.

    It is not the usb port as another usb have been recognized. I have tried in all the other usb ports as well. bottom line is that windows vista (and itunes) is not to recognize the ipod at all.

    I've been in contact with apple, with anything. I googled solutions for hundreds of other posts with exactly the same problem but no useful solution. Windows vista has no port of portable device - how can we get this on their pc?

    I've been at this for 4 days now and you have uninstalled/reinstalled much too often and I'm out! all tips (other that "have you tried another usb port' or ' have you reset the ipod" or something similar) would be much appreciated.

    once more, there is no drive of laptop/ipod device located on this computer. Please, I really hope someone can help =)

    * Microsofts response: *.

    Hello

    Step 1: enable USB bus power back

    If the laptop is configured to save power by turning off the power on the USB (Universal Serial Bus) port, it may not recognize a connected iPod.

    To activate the rear USB bus power, you can follow the steps mentioned in the link from Apple below
    http://support.Apple.com/kb/TS1401

    You said Windows vista has no port of portable device normally, all portable devices are connected via a USB port and they appear under Bus USB controllers in Device Manager.

    Step 2: reinstall the USB controllers.

    First of all, please disconnect all USB devices and then perform the following steps:

    1. click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

    2. in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

    3. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

    Then, restart your computer and windows will automatically reinstall all USB controllers.

    If the problem persists,

    * Step 3:Download and install the latest drivers from the computer chipset laptop manufacturer s online.*

    * So here I am with the issue still not resolved. * How can I download and install the latest chipset drivers for the Toshiba Satellite L300 & Microsoft Vista to recognize my ipod? *

    Thanks in advance!

    > 3:Download step and install the latest drivers for chipset on the website s laptop manufacturer.
    > * so here the issue still not resolved. How can I download and install the latest chipset drivers > for the Toshiba Satellite L300 & Microsoft Vista to recognize my ipod?

    Install a material like Everest home Edition or similar diagnostic tool.
    This tool would enable details of the hardware on your laptop.
    It lists all the devices and chipset name too.
    I think that it s Intel chipset, so you can find the driver on the Intel page

    Welcome them

  • Satellite L300 PSLBGE screen turns white after a while.

    I * model Toshiba Satellite L300 PSLBGE * and I have never seen this problem before.
    I use my laptop since last year in fact my laptop screen turns white after spending some time on it, usually after 10-15 minutes...

    sound also stop here and the only solution is to reboot, after that reboot it still works well, but after a while once again its screen turns white.

    Please help for this problem

    Post edited by: bharatjaiswal5

    Hmm have you tried to reinstall / recover the laptop to see if it helps to solve this problem?
    In my opinion you should try it because it could be a problem in the system.

    Otherwise if new system installation / restore does not help you, it could be a malfunction of the equipment.

  • Satellite L300 PSLBGE - Win XP - FN does not work

    Hello!
    I just installed Windows XP (sp3) on a satellite L300 PSLBGE by Toshiba... and the FN key does not work.
    At the moment I have to activate bluetooth... but FN + F8 does not work.

    What can I do? I installed Hotkey, save energy and controls (1.0.0.8)...

    FN still does not work. FN + F3 does not activate the option to sleep...
    FN + F8 does not Bluetooth... FN + F6 and Fn + F7 to control brightness... nothing to do.

    Am I the only one having this problem?
    There is no updated BIOS... and it's very frustrating.
    If I press FN the Green led appears under tension... that there is no problem about the keyboard... What can I do?

    I absolutely have TO activate bluetooth... but if I press Fn + F8 it does not work! I want to read someone who have this laptop and told me "I have your satellite L300 PSLBGE 1 b 1 and my bluetooth and my FN button works with Windows XP!" ... maybe he could help me :)

    Thank you very much
    Tier

    Hello

    You need to install the common Module from the Toshiba European page and the FN keys will work!

    Check this box

  • Satellite L300 PSLBGE XP - How to activate Bluetooth without using FN + F8

    Hello!

    I just install WinXp on a satellite L300 PSLBGE by Toshiba... and the FN key does not work. At the moment I have to activate bluetooth... but FN + F8 does not work. What can I do? I installed Hotkey, save energy and controls (1.0.0.8)... FN does not work and the Bluetooth is not activated.

    I tried all the possible stack driver bluetooth... the answer is 'bluetooth is not ready' or 'connect the bluetooth device' (I have the Italian version... perhaps that the translation is not perfect...). Is there a work around to activate the bluetooth? Thank you!

    Hello

    I already said how to get the FN keys work in Win XP.
    Check this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=142403&

    As I said you need to install the common Module of the Toshiba page European and FN buttons won't work!
    In addition, you need to install battery Toshiba BT to get the BT working on your laptop.

    But; Are you sure that books supports BT 100%? What L300-xxx is this?

    Check this box

  • Satellite L300-29U - Vista crashes, even in safe mode

    Hi, I really hope there is someone out there who can help me, my laptop does not work (properly) more, and I don't know what is the cause.

    * The short version: *.

    Two days ago my computer froze all of a sudden for no apparent reason. It did not (without Ctrl-Alt-Del, etc), I could only move the pointer. Since then, has happened repeatedly, even in safe mode. A potential clue: runs chkdsk c: \r \f results in a blue screen.

    * Details: *.

    I have a Satellite L300-29U (about 3.5 years) with Windows Vista.
    Two days ago the computer is not responding, after running normally for a few hours. I had not installed a new hardware or software. Even the clock had stopped. Only the pointer could be moved, but clicking on had no effect, or no has Ctrl-Alt-Delete. I stopped him via the power button. It restarted normally, I opened it then Firefox, but shortly after the same problem has emerged.
    I selected the Mode without fail to start and then let my antivirus (Avira) program a complete check of the system. The computer froze again after about an hour and 30% in the analysis. (Curiously, the timer showing how much time had passed since the beginning of the analysis was still running, but had stopped the clock of the computer.)
    Later, I tried another full analysis and again once it froze. Before that, I ran a few quick scan negative that came.

    In general, I find that Windows starts fine, but in normal mode it freezes pretty quickly when I try to do something. In safe mode, it freezes more quickly, but it's still sometimes.

    I also tried the "repair your computer" option at startup.
    -System Restore does not help
    -Memory Diagnostic is not a problem

    Searching online, I found suggestions for select command prompt and try to chkdsk. My conclusions:
    -chkdsk c: /f gives no indication of errors. The only thing that might be unusual is the following message at the end (translated from Dutch): "cannot transfer the log to the event log messages. Status 50. »
    -chkdsk c: /r /f results in a blue screen, each time to the same point in the process, namely, the 4th stage (verification of the data of the file), after having transformed the 133 634 files. The blue screen that appears shows the following:

    -----
    QUOTE
    A problem has been detected and Windows has shut down to prevent damage to your computer.
    (...)
    Technical information: * STOP: 0 x 00008086 (0x00000000, 0x00000000, 0x00000000, 0x00000000)
    WORDS
    -----

    * Things I have NOT tried (again): *.

    -Execution of TOSHIBA hard drive recovery
    -Formatting the hard drive

    Why not try these again is that I still have a glimmer of hope that he might be up to a corrupt file, and I don't want to use a gun if it turns out to be a mosquito.

    I tried to look online for questions asked by people with problems and similar symptoms, but I find not only the case with some similarities, not exactly the same thing.

    Any suggestions? Any help would be greatly appreciated. Thank you for your time.

    > Two days my computer froze all of a sudden for no apparent reason
    Above all it s sign parts hardware problem as a module of memory or the motherboard can cause this.

    > Since it happened repeatedly, even in safe mode. A potential clue: runs chkdsk c: \r \f results in a blue screen.

    The command chkdsk access and HARD drive tests so it could also be that the HARD drive is the troublemaker.

    From my point of view, you should start the recovery and should set the device to the factory settings.
    If the device would not work even after you have used the factory condition, I guess that one of the mentioned parts malfunctions.

  • Need driver for Satellite L300 PSLB8E Vista graphics card

    I have problem with video controller driver not found.

    Toshiba Satellite L300 VISTA BUSSINES PSLB8E

    Thanks for your help

    Can explain this more accurate?
    You get an error or something else?

    However, you may delete the old graphic driver (Add/Remove Programs), restart your PC and then install the graphics driver that you downloaded on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  • Satellite L300-1BW - Vista cannot initialize properly

    Daughter has started nine laptop Satellite L300-1BW and can t use the laptop as their was a problem
    I need help to fix it.

    Windows Vista won t even not start. I put t know what is the problem.
    Diagnostics, he said that it s a root problem.

    Any help?

    Result of successful complete event log diagnosis
    error code = 0 x 0 time = 78 mins test internal State
    Code of erro chk full result sauce time = 0 x 0 = 31 mins
    Test test res com sauce eror code boot state = 0 x 0 time = 47 mins
    installation state chk com test result = 0x0 time = 452 mins
    found root cause failure current seup
    syastem details session disc = \device\ harddisk0 repertoire_windows = c:\windows autochk run = 0 root causes of num = 1 chk test updates comp error code from success = 0x0 time = 0 ms test disk diagnostic comp sucsees eror failure code = 0x0 time 94

    Root cause found - failure while playing.
    Also the Vista laptop, is a Toshiba Satellite L300-1BW 415,4 base all Toshiba more round, loading of innovation.

    Any help would be appreciated if anyone knows how to solve this problem and it didn t come with a Vista disk or recovery

    Thanks celticman

    Try the laptop from the recovery of HARD drive partition recovery.
    Do you know how to start this process? Isn't it?

    Immediately after the laptop has been turned on, press the F8 key.
    Then choose the first option called fix my computer
    Then choose recovery Toshiba (last option in a new window)
    Now the HARD drive should products.

    I think this should help you reinstall the Win Vista again and finally the installation of Vista successfully

    Good bye

  • Satellite L300 PSLBGE network connection drops randomly times

    Hey,.

    I had this problem with my laptop because I bought 1.5 years ago.
    Now I launch Windows 7 x 64 with the latest bios (version 2.20 - WIN; day 25/02/10), chipset and wireless (the card is a: Realtek Wireless LAN Adapter 8187 B; driver version: 62.1182.0331.2010) drivers.

    The problem is that my network connection drop at random times.
    This produces both with my wireless lan card and it comes up with a variety of routers (at work and at home I use a linksys wrt54gl, but I tried it on all the other routers with the same result).

    I don't think it's a hardware failure, since the network seems to work very well under Linux (I tried Ubuntu 10). Also some time I took it for warranty service and they said that the material is fine, but I should "not use many programs at the same time and use Windowx XP.

    I understand the different devices (card WiFi, network card, webcam, etc.) inside the laptop are connected to some kind of usb hub. My guess is that it is something wrong with this "hub", given that the webcam works as defective.

    Thank you

    > From what I understand the different devices (card WiFi, network card, webcam, etc.) inside the laptop are connected to some kind of usb hub. My guess is that it is something wrong with this "hub", given that the webcam works as defective.

    No, the card WLan and LAN card are not connected to the USB just the webcam interfaces so it cannot be any USB issue.

    I think it might be a problem of Windows since Linux is OK

    I think you should check the power management settings in Windows 7 and card Wlan /LAN. This can be done in the Manager of devices-> WLan / LAN card-> Advanced tab properties.

    I also recommend upgrading from win 7 to the last installation of State all updates and patches

  • Start of Satellite L300-1 has 3 takes a lot of time

    Dear Sirs

    I bought a laptop from 1 to 3 Satellite L300 there is little time and I noticed that it is too slow at startup. It takes sometimes more than any portable computer so that it starts.

    This model is like that, or it can be changed or may be downgraded to Windows XP?

    Hello!

    Here in the forum are already discussions on this problem so that you can search a little.

    There are many ways to make Windows and departure faster upward. For example of auto-start all the, you need to disable programs that you don t need, disable services, defragment your drive HARD and far.

    Of course, you can install Windows XP on your laptop. Pilots and others, that you will find on the download from Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Good bye

  • Satellite A200-23O: Vista Home Premium how to set time battery

    Hello
    My A200 with preinstalled Vista only shows battery remaining percentage % time, but not her remaining battery in hh. My previous notebooks could display the time remaining on the battery on XP and one of my friends is using another laptop with Vista Business and the remaining life of the battery is available there also.

    I updated my BIOS to 2.4, but it still does not work. How can I make it work?

    Kind regards
    GH

    Good question. Wanted to get this posted on my laptop too. But what I found after hours of searching with google has been, that this feature is hardware based.
    I have a Toshiba laptop and another machine, one with XP and one with Vista Ultimate. None of them shows the time of the battery percentage only.

    I read you can install some 3rd party applications so that this works, but do not know if there are programs for Vista too or even if some of these tools are installed, it will work.

  • Questions on Satellite L300 - 11 c (PSLB0E) WLAN

    I bought a L300 - 11 c and after a week, I got a blue screen when you try to pass of the Wifi network. After a restart of the laptop working again. A few days later I got this blue screen again and I couldn't get my WLAN online. It seems that there is something wrong with my internal wireless (realtek 8187B) card. The driver was completely disappeared under Vista. He said only USB2.0 WLAN under other devices in Device Manager. I tried to reinstall the card with the drivers provided by Toshiba, but that did not work. The only sollution I could think about was to restore the full install of Vista from the recovery disc. After that, the Wlan card is functional.

    I installed not any strange software on the laptop, I just installed the latest microsoft updates and deleted some Google applications.

    Anyone know what happened here and how to prevent this from happening in the future?

    I use Vista Home premium...

    Kind regards

    Mark Kors

    Have you tried to roll back the OS to an earlier time (prior to the installation of the update)?
    You can try to do this, use the System Restore tool. Maybe using.

  • Satellite A200-1SJ - Vista reinstall WLan driver every time after reboot new

    Hello

    I have problems with communication wireless on my satellite A200-1SJ. When I swich on my Windows Vista early computer installing wireless network card drivers and the installation is not successful.

    I tried to install the latest drivers, but it does not help. In Device Manager its written as wan windows cannot load driver (code 31).
    The same problem is with the bluetooth adapter that does not work as well.

    Connectivity doctor say that any (LAN, Wlan) is swiched of when I am connected to the LAN and even information on missing bluetooth connectivity Doc.

    I tried to reinstal drivers and connectivity doctor, but it did not help.
    I would be grateful for all the help.

    THX CoRrUpT3R

    Did you check that you have downloaded the latest drivers from this page: http://eu.computers.toshiba-europe.com?
    I'm not sure of what causes this, but try to completely uninstall the wlan and bluetooth drivers, restart.
    Vista try to install them again?

    There may be a problem with your user account and you have not full admin rights. Try to log on as an administrator or create a new account using the privileges and do a reinstall of the drivers. Do this with the doctor of connectivity also. Could help.

  • Satellite L300-110 Vista Downgrade to XP

    ("New" in a store), I bought a Toshiba Satellite 300-110 with Vista installed, discovered that Vista was not compatible with almost everything and wanted to XP on it. First of all, I tried to format C during execution of vista, Vista did me not think C since Vista format that I did not understand that I was trieing to remove Vista...

    Measures taken so far:
    1 said the laptop in BIOS to restart on the CD/DVD
    2. the document in the format C (vista partition) completely using windows XP instalation CD.
    3. installed installed windows XP on 'SATA Compatibility Mode' (selected in the bios)
    4 found that the SATA compatibility mode does not use my laptop computer quality because you need AHCI.
    *(This means Windows XP is correctly installed on SATA _Compatibility_ mode, but i need instal XP on SATA _AHCI_ mode, which is Far Better) *.
    5A tried to install XP on the SATA AHCI mode, but then at the launch of the instalation, I got a blue screen that says there is something wrong with my hard drive.
    6. I discovered that there is a necessary AHCI driver before you can install XP
    7. I found the right drivers on the internet and used Nlite to make a new windows XP install CD which includes the correct drivers.
    8. now, I came to a new blue screen. It is said (in Dutch): + Setup can not find support for the by you advised the massive savings devices + (I think it means: he can not find the drivers for my hard drive). + Installation will now installation support for the following mass rescue: + (located below :) (which means) +< none="">. +.
    + Press E if you want to install additional SCSI adapters, disks cd-rom-stations or special controllers for use with windows. Also if you have a record of support for devices of the plant's massive savings. +
    + Press ENTER if you have no record of factory support of devices for registration of mass, or when you do not want to insert any additional devices to save mass. +
    I think that's the point where I have to insert the drivers, but are in fact the drivers already on my CD of instalation XP Nlite.

    So: My hard drive does not have a problem because I can still boot XP compatibility mode.
    There is a problem with the SATA AHCI driver that must be installed before installing XP defenitely. I'm afraid that the laptop does not have the AHCI driver, but the laptop try just instal XP directly.
    The new XP installation CD is supposed to work very well. Anyone has a suggestion, how to install the SATA AHCI driver first?
    ================================================== ======================================

    Post edited by: JDJR

    Hello

    I m not a L300 owner but I was able to install Win XP using AHCI on my Satellite U400 mode.
    The point is that you should pass first to AHCI mode in BIOS before you try to install Win XP with SATA drivers!

    The SATA drivers are part of the Intel Storage Manager! You can find it on the European driver Toshiba page.
    The use of nLite is really good idea I did too and it worked!

    Integrate the drivers SATA (from Intel Storage Manager) in the new drive for Win XP
    Switch to the AHCI (save the changes made in the BIOS)
    Then start using a new Win XP drive.

    Notes; Win XP it contains at least SP2

  • Satellite L500D-167 (PSLT9E-01701MS4) - WLAN disconnects

    I have this laptop and he is nowhere to be found on the internet. It does not exist.

    OK now... Wireless on this laptop is OK as long as I use it constantly. 10 min. idle means disconnection. It is not possible to reconnect again. Only restarting solves the problem. WHY? I have the latest drivers. I'm starting to hate this laptop!

    HELP ME PLEASE

    Thank you very much

    Christina

    Hello Christina,

    I imagine that you research the laptop in the Internet because you need new driver WLAN for it. All the drivers and tools that you can find here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    Now, you can search the points:
    Laptop > Satellite > Satellite L Series > Satellite L500D > PSLT9E

    Maybe there is a new version of driver WLAN. Otherwise, make sure that energy-saving WLAN is disabled in Windows and update firmware on your router.

    By the way: what OS are you using?

Maybe you are looking for