Creating Rapiddrive Y570

Similar Questions

• New Y570 - a key recovery creates only 2 DVD

  When I run a key recovery - create the recovery disk - factory default disk recovery it says it requies 3 DVD, but it only creates 2 and then says it's 100% complete and finished. I have not touched one of the partitions. I ran two times and each time it created two DVDs. anyone know why I am not create 3 recovery DVDs? I am running Windows 7 and OKR 7.0

  
  

• Y570 Windows 7 reinstall errors

  I had my Y570 for some time now and recently decided a clean install and update all the drivers and all. I got a copy of ISO of Windows 7 HP and was planning on the use of the series on the back. I created my bootable DVD, and when I entered the facility he told me that since it was (OEM reserved), I could not install on this disk. I searched for a while and I formatted my HARD drive and cleaned by using diskpart. I then try to install it and I got the error "Setup could not create a new partition system. I looked again and I tried to repartition of diskpart and still the same error.

  I currently can't start Windows because I formatted the disk. And the only thing I have at my disposal is the Windows 7 DVD I created.

  Any help would be immensely appreciated, I past this since 6 hours and still nothing.

  Thank you.

  Hello
  Welcome to the forums!
  Try the link, should help
  http://www.SevenForums.com/installation-setup/260850-Setup-unable-create-new-system-partition.html
  Concerning

• Problem Lenovo Ideapad Y570 OKR

  Hey guys... I have a series boring problem

  I have as I said Ideapad Y570 Core i7 etc... I installed Win7 Manager and I met a wired problem, so I used the Center Manager win7 den 'den all the components of the system. "

  I did the Lair of all components of windows outside microsoft and also hidden files

  then I started to deal with the 'death' blue screen, so I decided to get my windows.

  I chose the OKR who requested a reboot... but it does not connect the recovery environment... tried so many times but nothing did.

  So I created the dics of recovery which were 3 DVD... to the factory default settings... then I started from the first DVD, but I will stop when the screen is black and loading with a setting "windows loading files.

  I tried to uninstall and reinstall the OKR but nothing happened.

  Please help me to recover my laptop for the default setting!

  
  

• I'll be able to use my computer if I uninstall Rapiddrive?

  Hello

  I just bought a Lenovo Y570 with a 64 GB SSD and Rapiddrive drivers on this subject. However, I'm trying to dual-boot Ubuntu and Windows 7, and Rapiddrive gave me a lot of grief. I plan to separate my SSD and HDD with Rapiddrive to facilitate my Ubuntu installation process, but I want to know if this will impact my computer somehow. I'm ready to reinstall Windows and do it only on the SSD, if that's what it takes, but I only have the recovery media that I made myself (Lenovo ship installation disc) and I don't know if I can do it. Any help would be appreciated.

  Hello

   
  I suggest you to see this link for more information about the dual boot with Linux and Windows7 using the fast player:
  Dual boot Linux/Windows and the quick drive
  http://forums.Lenovo.com/T5/IdeaPad-Y-U-V-and-Z-series/dual-boot-Linux-Windows-and-rapid-drive/TD-p/409321
  If you have further questions about quick uninstallation by car, I suggest you to contact Lenovo for a better resolution:
  
  http://forums.Lenovo.com/
  
  I hope this helps!

• Failed to create photo memories

  I use the mac on the Sierra photos app, update that became my mac perfect condition a paralyzed slug.

  According to the help of photos I can create a memory of an album as follows:

  1. Click on an album under Albums in the sidebar.
  2. Click Show as memory.
  3. Scroll down and click on add to memories

  My problem is that I do not see 'display in memory '.

  This means that I have no way to create a slideshow. No idea why I don't see "display memory"?

  Concerning

  My problem is that I do not see 'display in memory '.

  When you select an album in the sidebar, 'Show as memory' is under the search field in the toolbar.

  

  It is only available for standard albums, not for the smart albums.

• Node of automation is much more difficult to 'uncheck' than to 'create '.

  I use logical X about 5 months now, and I felt a fairly frustrating relationship with interaction of automation.  When I load automation, 'creation' of a knot of automation is simple... 1. click anywhere along the yellow line creates a node that is precisely where I clicked.  However, "popping/unclicking/destroy" this same node takes anywhere from 3 to 6 clicks to work.  I would love to be able to uncheck these nodes with the same exact ease with which I am able to create.  No relief in this case would be great!  Thank you

  Double click on the node to remove it... as simple as when it was created...   Click to create, double-click Delete.

  

• WHAT YEAR MODEL MODEL MC976LL/A WAS CREATED

  WHAT YEAR MODEL MODEL MC976LL/A WAS CREATED

  2012.

  http://www.EveryMac.com/systems/Apple/Macbook_pro/specs/MacBook-Pro-core-I7-2.6-15-mid-2012-retina-display-specs.html

• Can I create a recovery bootable USB through disk utility?

  My HARD drive is dying, I can't access my Macintosh HD partition anymore and I can't reinstall OS because I SMART errors. Before the format and reinstall the attempt to load slow my computer, random errors, etc. So I definitely think that the HARD drive is near death. My plan is to replace my HDD for a Virgin SSD, I perform this task several times on computers of the victory but for MAC, I wonder how I will load the new OS. Can I make a bootable USB with the recovery partition, but on a USB key tools? Unofrtunately I have more available Mac to create the USB bootable through itunes.

  My computer is the MacBook Pro (13-inch mid 2010), I have also all original packaging somewhere, if there is a CD that I can use, I certainly can get too.

  Any advice?

  Thank you!

  Apple have this to do a USB installation...

  Create an installer for OS X - Apple support bootable

  Another option is to use the diskmakerx.com application

  You must have the OS installer downloaded to make these methods of work is probably not practice on your failed drive.

  Both of these options are to run a 'normal' operating system too. The recovery partition is not 'normal '.

  Another option is to use the Internet recovery mode if your Mac supports...

  Computers that can be upgraded to use OS X Internet Recovery - Apple Support

  On macOS recovery - Apple Support

  Use wired ethernet for best results, since it will download a bootable OS & then download the installer of the OS also.

  I suspect you have the update of the firmware installed to add this feature if it has been updated over the last 3 years

  You may be able to generate a score of alternative recovery to another disk (such as a USB key) If you want to just "compensation of base OS.

  OS X: on Recovery Disk Wizard - Apple Support

  A last solution would be to clone your drive failing on an external drive (or use the new SSD in a proper case). That can be done in the modes of recovery via disk utility. Basically, you use a feature to "restore" to clone one volume to another. (I don't see clear instructions for the moment so ask if you want to pursue this option).

• create Apple ID

  Hi, I have an unknown error, when I create Apple ID.  I am fill all forms of registration of new Apple ID, but in the end, it gives me an error like this: "for assistance to connect this support."

  Click here and ask for help from the staff of the iTunes Store.

  (145024)

• ITunes can add images to mp3 created from vinyl record?

  I created on a 1000 mp3 files (320 bps, 441hz) of the vinyl record.  Obviously, I can manually create images of these files individually but will take a while, so I was wondering if iTunes can automatically create.  I tried to select all the images in the library by getting album artwork, but it tells me the following statement just ' get album artwork requires you to connect to the iTunes Store using an identifier to Apple. " Please go to the iTunes Store and log in or create a new Apple ID. "I connected to itunes and he always tells me the same thing. Could someone point me in the right direction?  My files are saved on my mac.  Thank you very much

  Yes, you can manually add a picture as the cover to any MP3 song in your iTunes library.  Source of origin has no importance.

  The other issue is separate.  In current iTunes, go to the iTunes menu bar, and then click accounts.  The menu drops down.  At the top of the menu, if you are connected currently, your name and your Apple ID are displayed.  Do you see that?

  If you are connected (and you see your name and your Apple ID), the menu bar

  File-> library-> Get Album Artwork

  You don't need to have whatever it is selected in your library.  iTunes tries to get lack of the album artwork for songs in your library.  iTunes only 'creates' images.  iTunes album art search resource online, based on data from song and download all that is available and adds songs album art.  One (or more) songs will not match available album art.

• How can I create a group through Outlook without the application Outlook email?

  How can I create a group by using Outlook without an application Outlook email?

  Sigmalambda wrote:

  How can I create a group by using Outlook without an application Outlook email?

  It is difficult to understand what you're trying to do. You can create a group and send an email to the group in any mail client. The recipients can use any e-mail provider or an e-mail client to receive e-mail. Please explain in more detail what you are trying to accomplish.

• The station to create function has been deleted recently? I can't create more songs on my phone stations.

  When you select the «...» ' to add songs to playlists etc. The option create a station is no longer available.  This feature has been removed?

  I have not used this feature before, but I see a command Station to start in the triple-dot for a song menu.  Is it the same or similar?

• IMac, how to stop the white icon files when creating new folders?

  Whenever I create a new folder, the folder contains these white icon files that end up getting deleted. Is there a way to prevent this?

  Thank you

  If you create a new folder with the Finder, there is no hierarchy, you get a single empty, empty folder icon, if you create a new folder in the Terminal with the following syntax blue, there is hierarchy.

  # Do the new folder has with B folder it contains. And C in B and D in C files.

  $ mkdir Pei A, B, C, D

  # Just make folder a.

  $ mkdir A

  Are you using a utility Finder replacement, or creating folders from an application or a script?

• How to create a PDF/X1a on a Mac? (with or without iWork)

  Hi all
  I don't have an idea what is a "PDF/X1a.
  I know how to create or convert PDF files on a mac, with the Preview app and the iWork.

  But a "PDF/X1a? What is c?

  Anyone know how to create or convert a "PDFX/X1a?

  Thanks to you all.

  Here is an explanation:

  https://www.prepressure.com/PDF/basics/PDFX-1A

  Frankly, I didn't know there are different "flavors". I create .pdf for years without knowing or worry about this. I just use an excerpt:

  

  Or, if you are in a document Pages (iWork as long that is not really exist anymore - there are separate applications: Pages, Numbers, Keynote), use the export as PDF option.

  Have never heard of someone that they were not able to read the PDF, I sent as an attachment.