Creating Windows DVD - can not detect the DVD burner.

Similar Questions

• Audio input Inspiron 15 3000 can not detect the headset

  Audio input Inspiron 15 3000 can not detect the headset, but audio dell can detect something trendy. However, the playback sound device cannot detect any helmet. Now I only get gurgling in the helmet. How to solve this problem?

  Hello. To test the headphone switch the native Windows audio driver Realtek audio driver.

  1. open Device Manager (type devmgmt.msc in the box of Windows search).
  2. develop the 'audio controllers, video & game' and right click on "Realtek High Definition Audio".
  3 Select this option to "Update driver software".
  4. click on "Browse my computer for driver software".
  5. click on "Let Me pick from a list of drivers on my computer".
  6. put the "Show compatible hardware" check box if not already checked.
  7. in the list of devices, click on 'High Definition Audio"(native driver).
  8. click on "next".
  9. in the update driver warning box, click 'Yes' (the driver).
  10 restart the portable computer if you are prompted. If not invited, so no need to restart.
  [To return to the Realtek driver, do it again but reverse the names in steps 1-6.]

  If it is still bubbling even with the native driver, test by using other headphones. If still no luck then probably hardware failure. Contact technical support for warranty repair.

  If it works fine with the native driver, then the Realtek driver is buggy. Try a different version of the driver. If you need help with this answer comes back with the full model name (something like "Inspiron 11 3147", etc.) and which operating system there.

• Windows 7 will not detect THE routers wireless, including mine.

  Windows 7 will not detect THE routers wireless, including mine. I inserted the cd of restoration of the system, and after that he picked up no internet. No, even if I connect it with the wire! Help!

  Hello

  Thank you for contacting Microsoft Community.
  Is properly installed wireless adapter driver?
  Go to start-> type devmgmt.msc-> press on enter. In the Device Manager window, expand network adapters. You should be able to see a list of network adapter as Ethernet, Bluetooth, etc. Make sure that you can find the adapter wireless from the list. If so, double-click it. Properties windows will be open. On the general tab, under device status, if it shows that the device is not functioning properly, please remove the case, locate the wireless network card and make sure the connections of antennas are coneected correctly. If even a connection is not properly connected or damaged, you cannot connect to any WiFi network.
  Response if the issue is not resolved.

• Windows Media can not read the file. I moved my music on my new computer, now I can not play

  I have an emachine computer and I put my music on discs and put it in my new computer. the only problem is that this message keeps coming up. Windows Media can not read the file. the player might not support the file type or does not take in charge the codel that was used to compress the file. need help

  Your computer may be missing code, download and install K-lite code pack can solve the problem. K-lite code Pack is free and safe, and it includes almost every video code and audio code.

• vISTA can NOT DETECT THE READER of CD/DVD,

  WINDOWS VISTA cannot DETECT THE CD PLAYER, ONCE CHECK IN DEVICE MANAGER, the PROPERTIES THE SHOWS "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». How can I get the DIFFICULTY of THIS PROBLEM?

  Thank you

  Hello

  Code 39 means that the driver is corrupted or missing.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Cannot create Windows DVD, burning the disc - Satellite L350

  Can someone help I'm on a Toshiba satellite L350
  I'm trying to burn a DVD with Windows DVD maker. It is the fourth I've done and the previous ones were all OK.

  I can't burn the DVD, I tried both types of disc and made about 10 attempts today.
  When I try to burn it starts OK then I get about 34% and get an error message

  I had two different error messages, it says "cannot create the DVD error unspecified.". "
  The other says "cannot create DVD catastrophic failure"

  As Akuma wrote, it can be a problem creating Windows DVD and has nothing to do with the functionality of optical disc drive. It is good to check the updates.

  Can you test the WEIRD feature using a different burning application?

• Cannot start Windows, Windows Setup does not detect the hard disk, Bootmgr is misiing

  I have a few problems on my laptop [Acer 3810 t]

  -The first problem
  My mobile give me screen "cannot start windows' who have 2 choices: run the Startup Repair tool and boot normally. I chose to fix it, but nothing happens and stuck "starting windows" and gives unmountable boot volume 'blue screen '. the Dungeon of blues screen appear (for laptop is a not restart). So I turned off my phone and turn it back on it. the "could not start" screen again and I chose to start normally. but the result is negative. My portable Dungeon cannot start windows. Because of that I am using the advanced boot option and choose all the boot type such asit cannot load the safemode, last configuration etc, but the result is the same, you cannot start windows. in safe mode, its stuck in loading fileinfo.sys. I do not give up to try again with the advanced boot option. until I have a bad situation. My laptop can only 1 file in safe mode and blues screen do not appear again (my laptop only return at the beginning of start or restart)

  -The second problem
  because it cant solved, I want to reinstall my laptop. My OS is Vista 32 bit (pre-installed). I want to install the new operating system, windows 7. I use Dsik Flash bootable USB to install Windows 7. But in the BIOS, it is detected as a USB HDD. So I set my BIOS to load USB HDD to the first order. the installation can be done, but only until the "start Setup" screen and its deadlock. I have it wait up to an hour, but nothing happens. So I'm going to BIOS, change SATA mode to IDE mode AHCI. Then load the USB and go "installation program start screen. but the new problem is the installation of window does not detect my hard drive. So I can not choose the place to install the operating system. I have to load the driver, but I did not. Again to load the configuration to AHCI and IDE, until I get my HDD can detected in IDE mode. So I think I can move easily, I choose custom installation and choose the hard drive to install the operating system. But unfortunately, at the beginning of the process, after choosing the OS, the Installer gives error if installation location the installation failed. (I forgot the error message)

  -The third problem
  So far, I can't spend 'startup begins' as well in mode IDE and AHCI. Also bootmgr in my hard disk is missing, so I can't go to move the startup repair or the startup option in my HDD as before

  What is the error code that you got with blue screen?

  I think that there is a problem with your drive HARD check that by contacting acer...

• LabVIEW can not detect the network drive so that other applications can.

  All network drives are mapped correctly and another application such as micro soft office or windows explore can see the correct mapping LabVIEW can not see the mapping? No idea how to solve this problem?

  -VS

  The solution: Add EnabledLinkedConnections to the registry

  https://TechNet.Microsoft.com/en-us/library/ee844140 (v = ws.10) .aspx

• Windows xp64 does not detect the printer hp laserjet p1102

  Hello

  Windows XP Professional X 64 Edition Version 2003 is installed on my server.  It does not detect the printer HP Laser Jet P1102, it needs of Virtual Port USB 001.  When I connect my printer, Windows does not detect the printer.  I lost the CD for the printer.  When I try to install the printer with drivers downloaded HP, it gets sleep showing message "Connect your USB cable" when it is already connected.

  Also when I try to connect to the printer on my workstation, Windows XP Professional 32-bit Edition, it must be connected, but off, the sharing is lost with other workstations, even if I set the static IP for all.

  Hello

  I suggest you post your query in the TechNet forum. Please post your question in the link for assistance below: http://social.technet.microsoft.com/Forums/en-US/itproxpsp/threads

• Windows 7 can not find the network

  Hi guys I hope that someone can help me, I walked trough the forums but none of the above helped me. I also do not really understand some of them. But that's what happened. My internet was fine yesterday, I was watching some stuff on aliexpress when my mouse froze, I tried to restart the laptop, but nothing worked so I had to remove the battery. After that the computer took forever to turn back and when he did my computer did not find my wifi more. I ran the following anti-virus, I tried the steps in the verification of all past system. I went in Sync Center, I have trid addition in manual, I tried to search for a wifi switch (I don't think I have a) I tried to restart the pc and the internet, I tried the system restore, I don't really know what else to do. Any suggestions?

  Hi Kate,.

  Thanks for posting your query in Microsoft Community.

  I understand that Windows 7 can't find the network and I appreciate the efforts made to try the patches. Let me ask you;

  • Restoring the system led?
  • What exactly happens when you try to connect to the Wi - Fi?

  This could be due to several reasons, including any third party software conflict. Try the following methods and check.

  Method 1: Start the computer in Mode safe mode with network and check if the problem persists. If the problem does not persist in SafeMode with network, put the computer in a clean boot state and check.

  Step 1: Start the computer using safe mode with networking

  Safe mode with networking is an option of troubleshooting for Windows that starts your computer in a limited State. Only basic files and drivers needed to run Windows are started. Safe Mode with networking appears in the corners of your monitor to identify which Windows mode you are using. You can use the internet connection in this mode.

  Please refer to: , start your computer in safe mode

  Step 2: Perform a clean boot in order to avoid any conflict of third party software.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 2: Update the network adapter

  Step 1: Update the driver through Device Manager

  a. click Start , type Device Manager and click on it

  b. expand network adapters

  c. make a right click driver, and then click Update driver software

  Step 2: Install the Windows updates pending

  To check the updates:

  1. Open Windows Update by clicking the Start button . In the search box, type Update, and then in the list of results, click Windows Update.

  2. In the left pane, click check for updates, and then wait while Windows searches the latest updates for your computer.

  3. If you see a message telling you that important updates are available, or you say to look at the important updates, click the message to view and select the updates to install.

  4. In the list, click the important updates for more information. Select the check boxes for the updates that you want to install and then click OK.

  5. Click install updates.

     Read and accept the terms of the license and then click Finish if the update requires it. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Step 3: Visit the computer manufacturer's support Web site and install the latest network for Windows 8 for the same model of device drivers.

  Additional information:

  Wireless and wired network problems

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Wireless can not detect the connection my TP Link router (SSID)

  Hello

  I bought Pavilion G4 - 1346tx Notebook PC last Sunday(15/04/2012).

  Since then, it cannot detect/find my ssid from my router. any other device inside the House can detect and connect. only my laptop cant. My Wifi card model: Broadcom 4313GN 1 x 1 adapter Wifi 802.11b/g/n

  I tried to change my router mode and etc2, always without prevail. I downloaded the driver with the latest version (5.100.82.82 of the HP website) that the previous stock (not sure which version) are still not.

  Please help me with this. I read two or three theme with the same problem and the solution, but the solution link is broken or can not find the driver. Help me ~ ~ ~

  Thank you. Appreciate the help...

  Solved in Paul_Tikkanen to:

  WiFi problem solved

• Installation installation of Win Vista Home premium error Windows errors can not reset the deployment engine. to install windows, restart the installation.

  Original title: Error Installing Win Vista Home premium.

  I have a PC with Windows Vista Home Premium.  Suddenly, it wouldn't start.  I changed the boot CD ROM and put my Vista disc in and tried to do a "repair" that it came with missing engine or something like this.  After several attempts, I gave up and formatted hard drive losing all my data and programs (rather difficult to backup files when the computer does not start).  So, I tried a complete installation.  I put in the license code and he started the installation.  After a few minutes, the message came;  "Windows Setup could not reset the deployment engine.  to install windows, restart the installation.  I tried several times including completely turn off the computer for several minutes and try again.  I tried several times.  I thought oh well, I will install my Windows 7 program (this and never used).  Error on this installation was: your CPU is only good for 32 bit and Win 7 I have is a 64-bit version.  I'D RATHER INSTALL VISTA BUT need help on the error regarding the deployment engine.  Thank you, Lloyd

  Hello

  See if this solution works for you:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/Windows-Setup-could-not-reinitialize-the/f9e6f3e6-EA80-487F-8d86-36c793f7c152

  See you soon.

• Windows Search can not index the A: drive

  Do not assign the letter 'A' on a disk partition, because Windows Search does not index the A: drive. I made a Win7 installation on a system with a SSD boot drive and a conventional hard drives.

  I did my data to partition the A: drive and moved my files user for this partition. Windows Search could not find anything on this drive until I assigned a different drive letter to the partition.

  I know that there are very few machines with floppy drive.

  Is always the convention however that readers and B are reserved for floppy drives and will be until there is no more floppy drives on the left.

  If you connect a USB external floppy drive on your machine, it is the reader, NOT the D or E or F or any other letter.

  Therefore, it is not a good plan to designate any partition on a HARD disk as drive A...

• Windows 7 can not activate the 0x800702c7 error code.

  Original title:

  my pc can not update bacause of an 0x800702c7 error code

  my windows 7 can not activate bacause of an 0x800702c7 error code

  What will I do?

  Hello

   
  How you try to activate Windows?
   
  Reference:
  Activate Windows 7 on this computer:
  http://Windows.Microsoft.com/en-us/Windows7/activate-Windows-7-on-this-computer
  Activate Windows 7: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/activating-Windows-7-frequently-asked-questions
   
   
  I hope this helps!

• Creating Windows DVD - burning is not the whole video

  Hello

  Hoping someone may be able to provide me with assistance.

  I added successfully 4 VTS_01 film of video files in a project using create DVD Windows, using windows Vista. I entered all the information and personalized menu to suit me. I then run the preview everything seems very well the film will play form beginning to end.

  Now hear is my problem.

  When I burn the project to a disk, it will go through the movements of code and finally burn to the disc. Once it is finished burning, the disc is ejected.

  I'm going to play in my DVD Player menus I have made show the 4 files ok and I play the movie. But he will play only the first 28 minutes of the film. I tried selecting other scenes that won't play in the menu of the scene and yet it just starts at the beginning and only run 28 minuets and start over.

  I tried to use the DVD + RW 4.7 GB and DVD-R DL 8.5 GB think my film can now be too big once I added the menu, that's why I tried the 8.5 GB. The film was initially recorded on the DVD + RW 4.7 GB until I ran across Windows DVD Maker. The original plays very well.

  There are no problems with the discs, burner or DVD play as I have tried several, also tested incentive.

  Is there something I'm not directly in the program? Believe if the files are not compatible at all why would be him coming up in Windows DVD Maker and I would like to twick the menu and burn?

  Hoping someone can help as my film is really great on the preview.

  Kind regards

  A

  You say you converted. WMP... I'm guessing that you
  has meant. WMV?

  The duration of 88 minutes should not be too long for a
  DVD, but the project may be too complex for your
  system resources. As a general rule, small projects
  have a better success rate.

  Did you add additional files to this project? MP3
  for example music files?

  What version of Movie Maker are you running?
  Vista Movie Maker 6 or Windows Live Movie Maker?

  If it is Vista Movie Maker 6... try disabling the filters
  Movie Maker... it can have some effect on DVD Maker.
  Reach... Tools / Options / Compatibility tab and turn off
  all filters / OK.

  If you continue to have problems with burning your video
  DVD... the following freeware can be worth a try.

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD-flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Download from (direct link) is the fastest).

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in most
  free-standing DVD players... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  To allow a longer time on the DVD... left click the
  The project settings button / select video / open the target
  Bitrate of drop window. Choose a will more small number
  result in a longer time on the DVD. Press on... Accept.

  The vertical bar to the left of the screen will tell you
  How much compression you need.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  software advanced as Sony, Cyberlink, Nero, Roxio,
  Adobe, Ulead, etc... but at least it is a start.

  Good luck.