Creating Windows dvd with the problem of the "invalid class string".

Similar Questions

• Cannot create Windows DVD, burning the disc - Satellite L350

  Can someone help I'm on a Toshiba satellite L350
  I'm trying to burn a DVD with Windows DVD maker. It is the fourth I've done and the previous ones were all OK.

  I can't burn the DVD, I tried both types of disc and made about 10 attempts today.
  When I try to burn it starts OK then I get about 34% and get an error message

  I had two different error messages, it says "cannot create the DVD error unspecified.". "
  The other says "cannot create DVD catastrophic failure"

  As Akuma wrote, it can be a problem creating Windows DVD and has nothing to do with the functionality of optical disc drive. It is good to check the updates.

  Can you test the WEIRD feature using a different burning application?

• Failed to create the DVD__Invalid class string

  This happens in Windows DVD maker and has just started a few days ago, I can't think of any modification of the software just before that, I installed the recommended Codec pack but it was a few weeks ago

  The "invalid class string" problem: it can be solved by repairing the DirectShow filters in the system. Some guys do it manually by editing the registry. But there is a simpler solution: "Codec Tweak Tool" oder "Filmerit. (The first is one of the last and can be used with Windows 7 without problem).

  Codec Tewak Tool (Version 4.9): http://www.codecguide.com/download_other.htm

  Filmerit: http://paul.glagla.free.fr/filmerit_en.htm

• MediaPlayer 12 on Windows 7 laptop playing my DVD with the sound; MediaPlayer 11 Windows XP desktop reads the DVD even with no sound: WHY?

  MediaPlayer 12 on Windows 7 laptop playing my DVD with the sound; MediaPlayer 11 Windows XP desktop reads the DVD even with no sound: WHY?

  Hello DebbieMarronYM,

  I suggest watching this thread where the poster had the same problem:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-sound/have-image-but-no-sound-when-playing-DVDs-with/211a9bfa-5d94-4CE1-AE95-84307ffdf20a
  Mind post x which is currently marked as an answer a lot of different solutions that can be useful.

• creating Windows dvd burning only the aspect 4:3, even when set to 16:9 ratio.

  Burns maker Windows dvd only the aspect ratio 4:3, even when the value 16:9.was ok in vista, but not the case in windows 7 too movie maker in windows 7 is garbage.this pure direct essential bundle is rubbish.why should set us up with that? I bet that there is no answer. tried to download older versions of movie maker work. but you get directed to this essential live bundle .any way this isn't the end of the world.as, I did a few dvd place pods...

  Always the same question on 8 January 2015. Windows Movie Maker produces video files in 16 / 9, but Windows DVD Maker that requires to 4:3 when burning a DVD, regardless of the settings.

  Again, I tried severale time and again on April 24, 2015, the ratio has to be 4:3!

  Too bad because I like the creation of DVD menu.

  I found the solution... very simple and it will work every time. before you burn the DVD with windows DVD creation, make sure you 'exit' your video to mpeg2 format, no matter what software you use to edit your videos, make sure you "output" your finished video in MPEG2 before burning with windows DVD maker

  MPEG2 is a DVD format that windows DVD maker recognizes and so it will burn your video ratio 16.9 this video will play on any DVD player. AVI WMV formats won't work even if you copy with movie maker then MPEG2... This is the key ~ MPEG2 ~ that's the secret.

  Unfortunately, Movie Maker stores projects only as MPEG-4 (.mp4) or Windows Media Video (.wmv).

  If your solution is another problem. We should convert mp4 or wmv in MPEG-2, how?

  Why Windows has no simple and direct way to burn DVD screen wide ratio?

• How to create the ISO image of windows 8 with the help of boot, efi, sources, and support files

  Hello
  I followed folders in my USB key:

  Boot
  EFI
  Sources
  Support,

  and the following files:

  Setup
  Bootmgr.EFI
  Bootmgr

  How can I create an ISO image of windows 8 with the help of these files and folders. I even installed ADK, but I couldn't keep up with it.
  I would be very grateful if someone could help me out here.

  Secondly, I would also like to know how to create a system image of WINDOWS 8, where the hard drive breaks down.

  Concerning
  MAK

  If you have the upgrade key, go here

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  You can go for the use of win8 / win7 / vista to match highlights you want - and download the win8 installation and run the installation with your key to download you need to install windows from that.  Will allow you to have an iso bootable.

  Make a picture of the control panel system / Windows 7 file recovery / system Image.  I certainly wouldn't put it on dvd.  It will be too.   Find an old preference portable hard drive and buy a $ 20 usb box, get an external hard drive.

• I bought Adobe Lightroom 6 only to see my DVD drive does not work with Windows 10.  Is it possible to download Lightroom?  I have the DVD with the serial number.

  I bought Adobe Lightroom 6 only to see my DVD drive does not work with Windows 10.  Is it possible to download Lightroom?  I have the DVD with the serial number.

  Download and install the trial version of Lightdroom CC.

  Then enter your serial number, follow these steps

  How to convert a trial CC 6 Lightroom Lightroom

• Windows DVD maker, the music does not play while the menu is on.

  Make a movie on Windows DVD maker, the only problem is my music, which I have added to the menu does not work. He played during the preview. But not after the film was burned. (The music file was an MP3 of a complete song in my Windows Media Player file) Also, is there a way to make music to play more of the song that I added, as he only play on a second clip 10. Can I do play together somg as long as I keep the menu screen?)

  Make a movie on Windows DVD maker, the only problem is my music, which I have added to the menu does not work. He played during the preview. But not after the film was burned. (The music file was an MP3 of a complete song in my Windows Media Player file) Also, is there a way to make music to play more of the song that I added, as he only play on a second clip 10. Can I do play together somg as long as I keep the menu screen?)

  ==========================================
  It is possible that you have a problem of compatibility with MP3 files...
  convert to WMA format before importation may be worth a try. Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• I'm trying to reinstall windows vista with the cd that hp sent me.

  I am trying to reinstall windows vista with the cd that hp sent me and he used to in stall, I had to have a new hard drive put in and I'm trying to put vista in and I can't help please

  If you have problems with the HP recovery disk, you will need to contact HP.

  This is HP Recovery Media, not Microsoft.

  HP Contact Info:

  http://welcome.HP.com/country/us/en/contact_us.html

  See you soon.

  Mick Murphy - Microsoft partner

• I deleted Adobe Reader 11 and rebooted and reinstalled Adobe Reader 11 and I still get the error message "Adobe Reader is blocked because it is outdated". Using Windows XP with the latest updates (SP3).

  
  

  I deleted Adobe Reader 11 and rebooted and reinstalled Adobe Reader 11 and I still get the error message "Adobe Reader is blocked because it is outdated". Using Windows XP with the latest updates (SP3).

  Screenshots attached to e-mail responses will not come back on the forum. You must connect to the forum and post in your topic using the camera icon in the editor.

  Google Chrome is a problem:

  • If you use the clean Chrome PDF Viewer, the results are unpredictable.
  • If you use the Adobe Reader with Chrome plugin, it can reject (block) If this isn't the latest version.  11.0.08 drive is the latest version for Windows XP, but Chrome can insist on the current version 11.0.10.

  My suggestion; Use a different browser!

• Have two old CD/DVD with the old movies of family 8mm on them.  When I try toopen them I get a statement that ' cannot they in format Samsung "suggestions?

  Have two old CD/DVD with the old movies of family 8mm on them.  When I try toopen them I get a statement that ' cannot they in format Samsung "suggestions?

  that is a difficult question. Try VLC to see if it will open to them. Usually when the disc appears on the desktop, if you click on it and let go, then press the clover sheet and I (get info command), you should be able to choose which application/program can open them. I have not already heard talk of the "samsung" format, I know there is a stranger there (lie format MTS from Sony). Regarding the conversion of them, maybe MPEG streamclip or hand brake? worst case scenario, you may need to spend some money to buy a video conversion app/program

  Sorry I can't help you more

  JB

• I have a project in iMovie HD6 and want export to Final Cut Pro.  I see that it is not possible from the previous questions, but is it possible that I could maybe create a dvd of the iMovie project and then who import in Final Cut?

  I have a project in iMovie HD6 and want export to Final Cut Pro.  I see that it is not possible from the previous questions, but is it possible that I could maybe create a dvd of the iMovie project and then who import in Final Cut?  I just want to make a new trailer for the project.

  What you suggest is possible but it takes software and third-party quality loss.

  Instead, export a QuickTIme movie. If you have a choice of codecs, choose Apple Intermediate Codec. You can save it where you want it-maybe in the movies.

  Then import the movie into FCP as a clip.

  Good luck.

  Russ

• I created a project with the first 14 and now subscribed elements trial version. However, when I open it there still the band "created with the trial version...". "in the middle of the page. How can I get rid of this?

  I created a project with the first 14 and now subscribed elements trial version. However, when I open it there still the band "created with the trial version...". "in the middle of the page. How can I get rid of this?

  SAMT

  Removal of watermark Adobe Premiere elements 14 test of the project file... Open the project file of 14 trials in 14 items purchased and then first Expert rendered workspaceTimeline Menu/delete the files. Then restore the timeline content.

  You can not remove the watermark from Adobe to an export of the trial even after you bought the product.

  Some of us have found that just opening the project of tryout in removes it from Premiere Elements purchased the Adobe watermark. Determine the way that works for you.

  Please let us know if everything above worked for you.

  Thank you.

  RTA

• Captivate 8: PDF export created a file with the extension PDF... but it's actually a video. Shouldn't it exported slides as appropriate PDF document?

  In Adobe Captivate, there is a 'PDF export' checkbox when you publish your project.

  He checked the box, and the publication of project created a file with the extension PDF... but it's actually a video. Shouldn't it exported slides as appropriate PDF document?

  No, it was published in an interactive PDF, has always been the case. It's another way to publish the video, that does not need to deploy it to an LMS or a Web server, you can send the PDF file. However, since Flash player is is more integrated in later versions of the Adobe Reader software, the user is to install it.